-
Kawasaki C7478 - page 1
Please read this manual and save it with your original sales receipt. T ools needed for assembly: Phillips Screwdriver , Hammer and Pliers (all not included); Cap Nut Assembly T ool (included). Use only with a Power Wheels ® 12 V olt Battery with Built-in Thermal Fuse and a Power Wheels ® 12 V olt Charger (both included). Kawasaki ® is a U.S. tr ...
-
Kawasaki C7478 - page 2
Table of Contents Important Information A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 B W arnings and Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
Kawasaki C7478 - page 3
CAUTION • In the unassembled state, this package contains small parts. Adult assembly is required. • Use the charger in dry locations only . W ARNING • Prevent Injuries and Deaths • Direct Adult Supervision Required • Keep Children Within Safe Riding Areas. These areas must be: - away from swimming pools and other bodies of water to preve ...
-
Kawasaki C7478 - page 4
Parts C Wheel - 4 • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. • Some parts were placed under t ...
-
Kawasaki C7478 - page 5
All Shown Actual Size Part Not Shown : Label Sheet .437 Cap Nut – 6 7 / 16 " W asher - 4 12 V olt Battery Cap Nut Assembly T ool Microphone 12-VOL T CHARGER 12 V olt Charger Pb #10 - 32 Lock Nut - 2 * For your convenience, extra fasteners are included! Parts 5 Steering Bushing Handlebar Assembly Front Back #6 x 1 / 2 " Screw - 2 #6 x 1& ...
-
Kawasaki C7478 - page 6
Parts Diagram D 1. V ehicle Body 2. Cowling 3. Seat 4. Wheel - 4 5. Hubcap - 4 6. Cap Nut - 6 7. Steering Column 8. Handlebar Neck 9. 12 V olt Battery 10. 12 V olt Charger 1 1. Microphone 12. Rear Wheel Driver - 2 13. Grip - 2 14. Handlebar - Front 15 Handlebar - Back 16. Steering Bushing 17. Handlebar 18. Rear Axle 19. Round Bushing - 2 20. #10 - ...
-
Kawasaki C7478 - page 7
Battery Charging E About Thermal Fuses Y our Power Wheels ® 12 volt battery is equipped with a built-in thermal fuse. The thermal fuse is a self-resetting safety device which automatically “trips” and shuts down operation of the vehicle if the vehicle is overloaded or the driving conditions too severe. Once a fuse has “tripped”, it will au ...
-
Kawasaki C7478 - page 8
Battery Charging • Plug the charger connector into the battery . • Plug the charger into a standard 120 volt wall outlet . Note: If power flow to the wall outlet is controlled by a switch, make sure the switch is “ON”. • Before first-time use, charge the battery for at least 18 hours. Never charge the battery longer than 30 hours. • Rec ...
-
Kawasaki C7478 - page 9
2 Assembly • Fit a .437 cap nut onto one end of the rear axle. • T ap the other end of the rear axle with a hammer to secure the cap nut on the end of the rear axle. Hint: Y ou may want to position the cap nut on a scrap block of wood to protect the assembly surface. Rear Axle .437 Cap Nut F Children can be harmed by small parts, sharp edges an ...
-
Kawasaki C7478 - page 10
W asher Rear Wheel Driver Cap Nut Cap Nut Assembly T ool Hubcap • Slide a washer onto the rear axle. • Slide the rear wheel driver onto the rear axle. Make sure the rear wheel driver fits onto the pins in the motor assembly . • Slide a wheel onto the rear axle. Make sure the ribs on the wheel fit into the grooves on the rear wheel driver . ? ...
-
Kawasaki C7478 - page 11
Assembly TM • Press the tab under the back of the seat and lift to remove the seat. • Make sure the motor harness wires are positioned in the channel to prevent them from being pinched between the cowling and vehicle body . • Fit the rectangular opening in the cowling over the shifter handle. • Align the front, side and rear tabs on the cow ...
-
Kawasaki C7478 - page 12
Assembly 12 • Lift the front end of the vehicle. • Slide the straight end of the steering column through the hole in the upper steering linkage and out through the hole in the vehicle body . • Insert the curved end of the steering column into the hole in the lower steering linkage. Steering Column Lower Steering Linkage Upper Steering Linkage ...
-
Kawasaki C7478 - page 13
Assembly 13 • Fit the front handlebar assembly into the front of the handlebar . Screw Pegs Screw Pegs Holes Holes Handlebar Front Handlebar Housing • Fit the handlebar assembly onto the end of the steering column. Make sure the handlebar grip area points towards the rear of the vehicle. • Fit a cap nut on the end of the steering column. • ...
-
Kawasaki C7478 - page 14
R ® Assembly 14 • Bend the plastic tip at the end of the microphone cord so that it forms a "T". • Insert the "T" end of the microphone cord into the hole in the handlebar . Pull gently on the microphone cord to make sure it is secure in the handlebar . • Hang the microphone on the handlebar . • Fit a hand grip onto eac ...
-
Kawasaki C7478 - page 15
Label Decoration G 15 Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • W ash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly ...
-
Kawasaki C7478 - page 16
IMPORT ANT! Use only a Power Wheels ® 12 volt battery with built-in thermal fuse. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels ® 12 volt charger before operating your vehicle for the first time. Charge the battery for at least 14 hours after each use ...
-
Kawasaki C7478 - page 17
If a battery leak develops, avoid contact with the leaking acid and place the damaged battery in a plastic bag. See information below for proper disposal. If acid comes in contact with skin or eyes, flush with cool water for at least 15 minutes and call a physician. If acid is internally ingested , give water , milk of magnesia or egg whites immedi ...
-
Kawasaki C7478 - page 18
T each Safety Rules to Children While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment skills are still very immature. Unsupervised driving by children can lead to serious injury . Before children use this vehicle, an adult should carefully evaluate the driving area as well as t ...
-
Kawasaki C7478 - page 19
• Make sure the shifter is in the LOW SPEED position. • Press the foot pedal. The vehicle will drive forward at a maximum of 2 1 / 2 mph. • Help your child practice steering to learn how far and how quickly to turn the handlebar when driving forward in low speed. • Y our vehicle has a patented, electronic braking system that automatically s ...
-
Kawasaki C7478 - page 20
IMPORT ANT! T o avoid damaging the motors and gears, stop the vehicle before shifting between low and high speed. • Make sure the shifter is in the HIGH SPEED position. • Press the foot pedal. The vehicle will drive forward at a maximum of 5 mph. • Help your child practice steering to learn how far and how quickly to turn the handlebar when d ...
-
Kawasaki C7478 - page 21
Problems and Solutions Guide IMPORT ANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below . If you still experience a problem, please contact Power Wheels ® Consumer Relations, toll-free at 1-800-348-0751 between 8 AM and 6 PM (EST) Monday through Friday . Or , contact your local Power Wheels ® aut ...
-
Kawasaki C7478 - page 22
Problems and Solutions Guide Short run time Undercharged battery Charge the battery . A new batter y should have been charged for at least 18 hours before using the vehicle for the first time. After first-time use, recharge the battery for at least 14 hours after each use. Never charge the battery longer than 30 hours. Check all wires and connector ...
-
Kawasaki C7478 - page 23
Problems and Solutions Guide Problem Possible Cause Solution When the foot pedal is pressed Operation of vehicle in low speed It is possible that only one rear wheel may spin when both only one rear wheel spins rear wheels ar e raised off the gr ound and the vehicle is in low speed. This does not necessarily indicate a problem. Check for proper ope ...
-
Kawasaki C7478 - page 24
PRINTED IN MEXICO C7478pr-0920 IMPOR T ANT! DO NOT use this vehicle for the first time until you have charged the battery for 18 hours. Remember to … ✔ Charge the battery immediately after each use. ✔ Charge the battery once a month during storage, even if the vehicle has not been used. Failure to follow these instructions will permanently da ...
Avez-vous une question à propos de Kawasaki C7478?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Kawasaki C7478, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Kawasaki C7478 il est probable qu’il a envie de partager la façon de le résoudre.