Français dropdown-ico

Manuel d’utilisation Dell P25S

62 pages 9.59 mb
Télécharger

Aller à la page of 62

Summary
  • Dell P25S - page 1

    Dell Latitude E5250 / 5250 Owner's Manual Regulatory Model: P25S Regulatory Type: P25S001 ...

  • Dell P25S - page 2

    Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 201 ...

  • Dell P25S - page 3

    1 Working on Your Computer Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following conditions exist: • You have read the safety information that ...

  • Dell P25S - page 4

    3. If the computer is connected to a docking device (docked), undock it. CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device. 4. Disconnect all network cables from the computer. 5. Disconnect your computer and all attached devices from their electrical outlets. 6. Close ...

  • Dell P25S - page 5

    * On the Home screen, click and then select Shut down . • In Windows 7: 1. Click Start . 2. Click Shut Down. or 1. Click Start . 2. Click the arrow in the lower-right corner of the Start menu as shown below, and then click Shut Down . 2. Ensure that the computer and all attached devices are turned off. If your computer and attached devices did no ...

  • Dell P25S - page 6

    2 Removing and Installing Components This section provides detailed information on how to remove or install the components from your computer. Recommended Tools The procedures in this document may require the following tools: • Small flat-blade screwdriver • #0 Phillips screwdriver • #1 Phillips screwdriver • Small plastic scribe System Ove ...

  • Dell P25S - page 7

    Front and Back View 1. network connector 2. USB 3.0 connector 3. HDMI connector 4. microphones (optional) 5. camera 6. camera-status light 7. power connector 8. microphone 9. power button 10. Mini-DisplayPort connector 11. USB 3.0 connector with PowerShare 12. memory-card reader 13. contactless smart-card reader (optional) 14. fingerprint reader (o ...

  • Dell P25S - page 8

    15. wireless-status light 16. battery-status light 17. hard-drive activity light 18. power-status light 19. speakers 20. touchpad 21. smart-card reader (optional) 22. headset connector 23. security-cable slot 24. dock connector (optional) 25. service-tag label Removing the SD Card 1. Follow the procedures in Before Working Inside Your Computer . 2. ...

  • Dell P25S - page 9

    NOTE: You may need a sharp tool to pry the base cover from its edge. Installing the Base Cover 1. Place the base cover to align with the screw holders on the computer. 2. Tighten the screws to secure the base cover to the computer. 3. Follow the procedures in After Working Inside Your Computer . Removing the Battery 1. Follow the procedures in Befo ...

  • Dell P25S - page 10

    a. Remove the screw that secures the battery to the computer [1]. b. Lift and push to remove the battery from the computer [2] [3]. Installing the Battery 1. Insert the battery into its place on the computer. 2. Route the battery cable through its routing channel. 3. Tighten the screw to secure the battery to the computer. 4. Connect the battery ca ...

  • Dell P25S - page 11

    4. Remove the hard-drive assembly from the computer. 5. Pull to release the hard-drive cable from its connector. 11 ...

  • Dell P25S - page 12

    6. Remove the screws that secure the hard-drive bracket to the hard drive [1] and remove the hard drive from the hard-drive bracket [2]. Installing the Hard-Drive Assembly 1. Place the hard-drive bracket on the hard drive to align the screw holders and tighten the screws to secure the hard-drive bracket. 2. Connect the hard-drive cable to its conne ...

  • Dell P25S - page 13

    a. battery b. base cover 7. Follow the procedures in After Working Inside Your Computer . Removing the Memory 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a. base cover b. battery 3. Pry the clips securing the memory module until the memory pops-up and remove the memory from the system board. Installing the Memor ...

  • Dell P25S - page 14

    NOTE: You may need a sharp tool to pry the keyboard trim from its edges. 3. Remove the keyboard trim from the keyboard. Installing the Keyboard Trim 1. Insert the keyboard trim to the keyboard until it snaps in its place. 2. Follow the procedures in After Working Inside Your Computer . Removing the Keyboard 1. Follow the procedures in Before Workin ...

  • Dell P25S - page 15

    5. Remove the keyboard from the computer. Installing the Keyboard 1. Place the keyboard to align with the screw holders on the computer. 2. Connect the keyboard cable to its connector on the system board. 3. Tighten the screws to secure the keyboard to the computer. 4. Install the: a. keyboard trim b. battery c. base cover 5. Follow the procedures ...

  • Dell P25S - page 16

    a. base cover b. battery c. keyboard trim d. keyboard 3. Remove the screws that secure the palmrest to the computer. 4. Flip the computer and perform the following steps: a. Disconnect the touchpad cable and USH board cable from their connectors [1] [2]. b. Remove the screw that secures the palmrest to the computer [3]. 5. Pry the palmrest at its e ...

  • Dell P25S - page 17

    Installing the Palmrest 1. Place the palmrest on the computer. 2. Connect the following cables to their connectors on the system board: a. LED board b. USH board c. touchpad board 3. Tighten the screws at the front and back of the computer to secure the palmrest. 4. Install the: a. keyboard b. keyboard trim c. battery d. base cover 5. Follow the pr ...

  • Dell P25S - page 18

    4. Release the SmartCard reader board. To release the SmartCard reader board: a. Remove the screws that secure the SmartCard-reader board to the palmrest [1]. b. Push the SmartCard-reader board to release it [2]. 5. Remove the SmartCard reader board from the palmrest. 18 ...

  • Dell P25S - page 19

    Installing the SmartCard-Reader Board 1. Place the SmartCard-reader board into its slot on the palmrest. 2. Tighten the screws to secure the SmartCard-reader board to the palmrest. 3. Fix the SmartCard-reader cable and connect the SmartCard-reader cable to its connector on the USH board. 4. Install the: a. palmrest b. keyboard c. keyboard trim d. b ...

  • Dell P25S - page 20

    Installing the USH Board 1. Place the USH Board on the palmrest. 2. Tighten the screw to secure the USH board to the palmrest. 3. Connect all the cables to the USH board. 4. Install the: a. palmrest b. keyboard c. keyboard trim d. hard-drive assembly e. battery f. base cover 5. Follow the procedures in After Working Inside Your Computer . Removing ...

  • Dell P25S - page 21

    Installing the Finger-Print Reader Board 1. Insert the finger-print reader board into its place on the palmrest. 2. Connect the finger-print reader cable to the finger-print reader board. 3. Place the metal bracket on the finger-print reader board and tighten the screw to secure the finger- print reader board. 4. Install the: a. keyboard trim b. ke ...

  • Dell P25S - page 22

    Installing the LED Board 1. Insert the LED board into its slot on the palmrest. 2. Tighten the screw that secures the LED board to the palmrest. 3. Connect the LED-board cable to its connector on the LED board. 4. Install the: a. palmrest b. keyboard c. keyboard trim d. battery e. base cover 5. Follow the procedures in After Working Inside Your Com ...

  • Dell P25S - page 23

    4. Perform the following steps: a. Flip the computer. b. Remove the screw to release the metal bracket on the power-connector port [1] [2]. c. Lift and remove the power-connector port from the computer [3]. Installing the power-connector port 1. Insert the power-connector port into its place on the computer. 2. Place the metal bracket on the power- ...

  • Dell P25S - page 24

    e. keyboard lattice f. battery g. base cover 6. Follow the procedures in After Working Inside Your Computer . Removing the WLAN Card / WiGig Card NOTE: WiGig card is optional. 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the base cover . 3. Perform the following steps to remove the WLAN card: a. Disconnect the WLAN ca ...

  • Dell P25S - page 25

    Installing the WLAN Card / WiGig Card 1. Place the WLAN card into its slot on the computer. 2. Tighten the screw to secure the WLAN card to the computer. 3. Connect the WLAN cables to their connectors on the WLAN Card. 4. Install the base cover . 5. Follow the procedures in After Working Inside Your Computer . Removing the WWAN Card 1. Follow the p ...

  • Dell P25S - page 26

    Installing the WWAN Card 1. Place the WWAN card into its slot on the computer. 2. Tighten the screw to secure the WWAN card to the computer. 3. Connect the WWAN cables to their connectors on the WWAN Card. 4. Install the base cover . 5. Follow the procedures in After Working Inside Your Computer . Removing the Display-Hinge Brackets 1. Follow the p ...

  • Dell P25S - page 27

    Installing the Display-Hinge Brackets 1. Insert the display-hinge brackets into their slots on the computer. 2. Tighten the screws at the front and back of the computer to secure the display-hinge brackets. 3. Install the: a. palmrest b. keyboard c. keyboard trim d. hard-drive assembly e. memory f. battery g. base cover 4. Follow the procedures in ...

  • Dell P25S - page 28

    4. Disconnect the display cable from the system board. To disconnect the display cable: a. Remove the screw that secures the display-cable bracket to the computer [1]. b. Remove the display-cable bracket to access the display cable [2]. c. Disconnect the display cable from the system board [3]. 5. Release the display cable from its routing channel. ...

  • Dell P25S - page 29

    6. Remove the screws that secure the display assembly [1] and lift the display assembly to remove it from the computer [2]. Installing the Display Assembly 1. Place the display assembly to align with the screw holders on the computer. 2. Route the WWAN, WLAN, and display cables through their routing channels. 3. Tighten the screws to secure the dis ...

  • Dell P25S - page 30

    d. keyboard trim e. battery f. base cover 7. Follow the procedures in After Working Inside Your Computer . Removing the Display Bezel 1. Follow the procedures in Before Working Inside Your Computer . 2. Pry the edges to release the display bezel from the display assembly. 3. Remove the display bezel from the display assembly. Installing the Display ...

  • Dell P25S - page 31

    Removing the Display Panel 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a. base cover b. battery c. display bezel 3. Remove the screws that secure the display panel to the display assembly [1] and lift to flip the display panel to access the eDP cable [2]. 4. Peel the adhesive [1] to access the eDP cable [2]. 5. ...

  • Dell P25S - page 32

    Installing the Display Panel 1. Connect the eDP cable to its connector and fix the adhesive tape. 2. Place the display panel to align with the screw holders on the display assembly. 3. Tighten the screws to secure the display panel to the display assembly. 4. Install the: a. display bezel b. battery c. base cover 5. Follow the procedures in After W ...

  • Dell P25S - page 33

    Installing the Display Hinges 1. Insert the display hinges into their slots on the display assembly. 2. Tighten the screws to secure the display hinge on both sides of the display assembly. 3. Install the: a. display bezel b. display assembly c. display-hinge brackets d. palmrest e. keyboard f. keyboard trim g. hard-drive assembly h. memory i. batt ...

  • Dell P25S - page 34

    Installing the Camera 1. Insert the camera to its place on the display assembly. 2. Connect the camera cable to its connector. 3. Install the: a. display panel b. display bezel c. battery d. base cover 4. Follow the procedures in After Working Inside Your Computer . Removing the eDP Cable 1. Follow the procedures in Before Working Inside Your Compu ...

  • Dell P25S - page 35

    Installing the eDP cable 1. Fix the eDP cable in its place on the display assembly. 2. Connect the eDP cable to its connector. 3. Install the: a. display panel b. display bezel c. display assembly d. display-hinge brackets e. palmrest f. keyboard g. keyboard trim h. hard-drive assembly i. memory j. battery k. base cover 4. Follow the procedures in ...

  • Dell P25S - page 36

    4. Perform the following steps to remove the system fan from the computer: a. Remove the screws that secure the system fan to the computer [1]. b. Remove the system fan from the computer [2]. Installing the System Fan 1. Place the system fan into its slot on the computer. 2. Tighten the screws to secure the system fan to the computer. 3. Connect th ...

  • Dell P25S - page 37

    Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a. base cover b. battery c. memory d. hard-drive assembly e. keyboard trim f. keyboard g. palmrest 3. Perform the following steps to remove the coin-cell battery from the computer: a. Disconnect the coin-cell battery cable from its connec ...

  • Dell P25S - page 38

    Removing the System Board 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a. SD card b. base cover c. battery d. memory e. hard-drive assembly f. keyboard trim g. keyboard h. palmrest i. display-hinge brackets j. display assembly k. system fan 3. Disconnect the following cables from the system board: a. power-connec ...

  • Dell P25S - page 39

    5. Remove the system board from the chassis. Installing the System Board 1. Place the system board to align with the screw holders on the computer. 2. Tighten the screws to secure the system board to the computer. 3. Connect the following cables to their connectors on the system board: a. speaker b. power-connector c. coin-cell battery 4. Install t ...

  • Dell P25S - page 40

    b. display-hinge brackets c. palmrest d. keyboard e. keyboard trim f. hard-drive assembly g. memory h. battery i. base cover j. SD card 5. Follow the procedures in After Working Inside Your Computer . Removing the Heatsink 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a. base cover b. battery c. memory d. keyboard ...

  • Dell P25S - page 41

    3. Install the: a. system board b. system fan c. display assembly d. display-hinge brackets e. palmrest f. keyboard g. keyboard trim h. hard-drive assembly i. memory j. battery k. base cover 4. Follow the procedures in After Working Inside Your Computer . Removing the Speakers 1. Follow the procedures in Before Working Inside Your Computer . 2. Rem ...

  • Dell P25S - page 42

    4. Perform the following steps to remove the speakers from the computer: a. Remove the screws that secure the speakers to the computer [1]. b. Remove the speakers from the computer [2]. Installing the Speakers 1. Place the speakers into their slots on the computer. 2. Tighten the screws to secure the speakers to the computer. 3. Route the speaker c ...

  • Dell P25S - page 43

    3 System Setup Options NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear. Table 1. General Option Description System Information This section lists the primary hardware features of your computer. • System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Owne ...

  • Dell P25S - page 44

    Option Description • Enabled w/PXE: This option is enabled by default. Parallel Port Allows you to configure the parallel port on the docking station. The options are: • Disabled • AT: This option is enabled by default. • PS2 • ECP Serial Port Allows you to configure the integrated serial port. The options are: • Disabled • COM1: This ...

  • Dell P25S - page 45

    Option Description NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings. USB PowerShare This field configures the USB PowerShare feature behavior. This option allows you to charge external devices using the stored system battery power through the USB PowerShare port. Audio This field enables or disables the inte ...

  • Dell P25S - page 46

    Table 4. Security Option Description Admin Password Allows you to set, change, or delete the administrator (admin) password. NOTE: You must set the admin password before you set the system or hard drive password. Deleting the admin password automatically deletes the system password and the hard drive password. NOTE: Successful password changes take ...

  • Dell P25S - page 47

    Option Description Computrace Allows you to activate or disable the optional Computrace software The options are: • Deactivate • Disable • Activate NOTE: The Activate and Disable options will permanently activate or disable the feature and no further changes will be allowed Deactivate (default) CPU XD Support Allows you to enable the Execute ...

  • Dell P25S - page 48

    Option Description • Append from File - Adds a key to the current database from a user- selected file • Delete - Deletes the selected key • Reset All Keys - Resets to default setting • Delete All Key s- Deletes all the keys NOTE: If you disable the Custom Mode, all the changes made will be erased and the keys will restore to default setting ...

  • Dell P25S - page 49

    Table 7. Power Management Option Description AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected. Default Setting: Wake on AC is not selected. Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are: • Disabled (default) • Every ...

  • Dell P25S - page 50

    Option Description Disabled (default) Primary Battery Charge Configuration Allows you to select the charging mode for the battery. The options are: • Adaptive • Standard - Fully charges your battery at a standard rate. • ExpressCharge - The battery charges over a shorter period of time using Dell’s fast charging technology. This option is e ...

  • Dell P25S - page 51

    Option Description Fn Key Emulation Allows you to set the option where the <Scroll Lock> key is used to simulate the <Fn> key feature. Enable Fn Key Emulation (default) Fn Lock Options Allows you to let hot key combinations <Fn> + <Esc> toggle the primary behavior of F1–F12, between their standard and secondary functions. ...

  • Dell P25S - page 52

    Option Description Trusted Execution - disabled by default Table 10. Wireless Option Description Wireless Switch Allows to set the wireless devices that can be controlled by the wireless switch. The options are: • WWAN • GPS (on WWAN Module) • WLAN/WiGig • Bluetooth All the options are enabled by default. NOTE: For WLAN and WiGig enable or ...

  • Dell P25S - page 53

    4 Technical Specifications NOTE: Offerings may vary by region. For more information regarding the configuration of your computer, click Start (Start icon) → Help and Support , and then select the option to view information about your computer. NOTE: In Windows 8.1, navigate to Help and Support to view information about your computer. Table 13. Sy ...

  • Dell P25S - page 54

    Feature Specification Intel 5th Generation Processors 4 GB, 8 GB, or 16 GB Memory type DDR3L SDRAM (1600 MHz) Minimum memory 4 GB Maximum memory Intel 4th Generation Processors 8 GB Intel 5th Generation Processors 16 GB Table 16. Audio Feature Specification Type High-definition audio Controller Realtek ALC3235 Stereo conversion Digital Audio-out th ...

  • Dell P25S - page 55

    Table 18. Camera Features Specification Camera Resolution HD Panel 1280 x 720 pixels FHD Panel 1920 x 1080 pixels Video Resolution (maximum) HD Panel 1280 x 720 pixels FHD Panel 1920 x 1080 pixels Diagonal viewing angle 74° Table 19. Communications Features Specification Network adapter 10/100/1000 Mb/s Ethernet (RJ-45) Wireless internal wireless ...

  • Dell P25S - page 56

    Table 22. Display Feature Specification Type Non-Touch HD Anti-Glare Touch FHD (E2E) Dimensions: Height 3.00 mm (0.12 inch) 5.95 mm (0.23 inch) Width 300.40 mm x 181.40 mm (11.83 inches x 7.14 inches) 302.30 mm x 194.39 mm (11.89 inches x 7.65 inches) Diagonal 317.50 mm (12.50 inches) 317.50 mm (12.50 inches) Active area (X/Y) 276.61 mm x 155.52 mm ...

  • Dell P25S - page 57

    Feature Depth 177.50 mm (6.98 inches) 233.00 mm (9.17 inches) Height 7.05 mm (0.27 inch) 7.05 mm (0.27 inch) Width 94.80 mm (3.73 inches) 94.80 mm (3.73 inches) Weight 265 g (0.58 lb) 340 g (0.75 lb) Voltage 11.1 VDC 7.4 VDC Temperature range: Operating • Charge: 0 °C to 50 °C • Discharge: 0 °C to 70 °C • Operating: 0° to 35° C (32° to ...

  • Dell P25S - page 58

    Table 28. Environmental Feature Specification Temperature: Operating 0 °C to 35 °C (32 °F to 95 °F) Storage –40 °C to 65 °C (–40 °F to 149 °F) Relative humidity (maximum): Operating 10 % to 90 % (non condensing) Storage 5 % to 95 % (non condensing) Altitude (maximum): Operating 0 m to 3048 m (0 ft to 10,000 ft) 0° to 35°C Non-Operatin ...

  • Dell P25S - page 59

    5 Diagnostics If you experience a problem with your computer, run the ePSA diagnostics before contacting Dell for technical assistance. The purpose of running diagnostics is to test your computer's hardware without requiring additional equipment or risking data loss. If you are unable to fix the problem yourself, service and support personnel ...

  • Dell P25S - page 60

    1. Shutdown the computer. 2. Press and hold the <fn> key, while pressing the power button, and then release both. The Enhanced Pre-boot System Assessment window displays, listing all devices detected in the computer. The diagnostics starts running the tests on all the detected devices. 3. On the boot menu screen, select the Diagnostics option ...

  • Dell P25S - page 61

    Storage LED Power LED Wireless LED Fault Description Blinking Solid Blinking The display encountered a problem during initialization. Off Blinking Blinking The modem is preventing the system from completing POST Off Blinking Off Memory failed to initialize or memory is unsupported. Battery Status Lights If the computer is connected to an electrical ...

  • Dell P25S - page 62

    6 Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your are ...

Fabricant Dell Catégorie Laptop

Les documents que nous recevons du fabricant de l'appareilDell P25S peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Dell
- manuels d’utilisations P25S
- fiches produit Dell
- dépliants
- ou étiquettes-énergie Dell P25S
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Dell P25S.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Dell P25S, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Dell P25S. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Dell P25S.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Dell P25S, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Dell P25S par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Dell P25S.

Le manuel d’utilisation complet Dell, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Dell P25S - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Dell P25S, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lDell P25S qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Dell P25S - qui devraient nous aider dans les premières étapes lors de l'utilisation Dell P25S
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Dell P25S
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Dell P25S dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Dell P25S?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Dell P25S, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Dell P25S il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)