Italiano dropdown-ico

Manuale per l’uso Meade TE688W

24 pagine 0.7 mb
Scarica

Vai alla pagina of 24

Summary
  • Meade TE688W - page 1

    TE688W Wireless Weather Forecaster with Indoor/ Outdoor Temperature and Humidity USER MANUAL ...

  • Meade TE688W - page 2

    INTRODUCTION Thank you for selecting a Meade Instruments Weather Forecaster. This device combines precise time keeping, monitoring and displaying of current temperature and humidity data from up to three remote locations. Meade Instruments is the world’s leading designer and manufacturer of telescopes for professional and amateur astronomers – ...

  • Meade TE688W - page 3

    INSTALLATION Communication between the main unit (receiver) and the remote sensor (transmitter) is wireless. This allows you to greater flexibility in choosing the location of remote sensor. The remote transmits data up to 100 feet (30 meters) over an open, unobstructed area. The remote sensor can be located either indoors or outdoors, allowing you ...

  • Meade TE688W - page 4

    • Though the remote sensors are weather-resistant, they should be placed away from direct sunlight, rain or snow. The optimal location for the remote sensor outdoors is under the eaves on the north side of the building. REMOTE TEMPERATURE AND HUMIDITY SENSOR (TS23C) FEATURES • Remote data transmission to the main unit via 433 MHz frequency • ...

  • Meade TE688W - page 5

    BATTERY INSTALLATION NOTE: When the temperature falls below freezing point 32°F (0°C), battery voltage will drop which may result in reduced the transmission range. For optimum performance in cold weather conditions, we recommend using lithium batteries. NOTE: Install the batteries and select the channel before mounting the remote sensor. • Rem ...

  • Meade TE688W - page 6

    MAIN UNIT The main unit measures indoor temperature and humidity readings and temperature and humidity from up to three remote sensors location (outside or inside). Its clock receives atomic time data from the US WWVB Atomic Clock. FEATURES TIME • Precise time and date set via signals from the US Atomic clock • 12 or 24 hour time format • Man ...

  • Meade TE688W - page 7

    J E F D G I H A B C K L 7 ...

  • Meade TE688W - page 8

    A. WEATHER FORECAST/ PRESSURE window B. TEMPERATURE/ HUMIDITY window C. CLOCK window D. DOWN (? ) button • Select the next available mode • Press and hold for 2 seconds to search for wireless signal from remote sensor. • Decrease parameters. E. ALARM button • When time mode has been selected, press once to display the alarm time of weekday ...

  • Meade TE688W - page 9

    H. UP (? ) button • Press to select the next available mode • Increase the parameters • In time with seconds display mode, press and hold for 2 seconds to activate/ deactivate radio controlled time signal search manually. • In time with weekday display mode, press and hold for 2 seconds to switch time zone from Pacific, Mountain, Central to ...

  • Meade TE688W - page 10

    OPERATION Once the main unit is powered, the display will show all available LCD segments for a moment. IMPORTANT: All of the display functions will be locked, allowing setting of your local altitude and pressure parameters by pressing the UP (? ) or DOWN (? ) and MODE buttons. The locked display will show the pressure icon and abbreviation “inHg ...

  • Meade TE688W - page 11

    The unit is designed to measure pressure changes at your specific location , when LOCAL barometric pressure is selected. Information for programming your unit, with either Altitude or Sea Level values, may be obtained from GPS readings, online from the Internet, etc. SEA LEVEL barometric pressure provides you with information about pressure changes ...

  • Meade TE688W - page 12

    VIEWING PRESSURE AND ALTITUDE INFORMATION To view pressure or altitude information, press MODE button. The display will alternate between the sea level pressure, local pressure and local altitude screens. PROGRAMMING SEA LEVEL PRESSURE (not required if you did altitude) • Press and hold MODE , until the barometric pressure digits are flashing. ? ...

  • Meade TE688W - page 13

    After selecting the Pressure Window , press and hold ALARM button to toggle the bar chart between the sea level pressure with a word “PRESSURE” displayed at the right bottom corner of the chart, temperature with a thermometer icon and “CH1” and a humidity with “RH” icon and “CH1” . MOON PHASE ICONS New Moon W aning Crescent W aning ...

  • Meade TE688W - page 14

    OPERATION • To select the indoor/ outdoor temperature and humidity mode, press UP (? ) or DOWN (? ) until the IN icon flashing with a beep sound alert. VIEWING REMOTE (CHANNEL) TEMPERATURE AND HUMIDITY Static Display: • Press the CHANNEL button to select measurements from different remote sensors, each is set to a unique channel 1, 2 or 3. Chan ...

  • Meade TE688W - page 15

    VIEWING MAX/MIN AND MINIMUM READINNGS Press the MEM/ HISTORY button recalling: • Current temperature and humidity • Minimum temperature and humidity • Maximum temperature and humidity at the remote location. RESETTING TEMPERATURE MEMORIES Press and hold MEM/ HISTORY button for 3 seconds to clear all channel memories. COMFORT LEVEL INDICATION ...

  • Meade TE688W - page 16

    Icon Atomic Time Reception Strength Undefined data No Reception for the past 24 hours Weak signal, but can be decoded Strong signal The WWVB tower icon on the unit’s display will flash indicating a radio signal reception from the WWVB station. If the tower icon is not fully lit, or if the time and date are not set automatically, please consider t ...

  • Meade TE688W - page 17

    TIME ZONE • Press MODE button once to select hour and minutes with the day of the week display. • Select the Time Zone by pressing and holding UP ( ? ) button for 3 seconds • Keep holding UP ( ? ) button until the desired US Time Zone (Pacific, Mountain, Central or Eastern) is highlighted on the display’s US map, located to the right of the ...

  • Meade TE688W - page 18

    • Adjust the hour using UP ( ? ) or DOWN ( ? ) buttons • Press ALARM button again. The minute digits will flash • Adjust the minutes using UP (? ) or DOWN (? ) buttons • Press ALARM button again to confirm and the weekday alarm time will be set • Set Single ( ) day alarm if desired in the same manner SETTING THE ICE WARNING ALARM ( ) If W ...

  • Meade TE688W - page 19

    TROUBLESHOOTING Check here before contacting customer service. Issue Symptom Solution Main unit US Atomic Time signal is not received Place unit by the window and keep it there overnight Remote sensor Cannot locate remote sensor Cannot change the channel Data does not match data on the main unit Check batteries Check location Press and hold DOWN ( ...

  • Meade TE688W - page 20

    SPECIFICATIONS Main Unit Indoor Temperature Operating range: 23.0°F to 122.0°F (-5°C to +50°C) Temperature resolution: 0.2°F (0.1°C) User-selectable (°F or °C) temperature display Humidity (Indoor) Operating Range: 30% to 80% Resolution: 1% Accuracy: 7% Sampling Interval: 10 seconds Weather Forecast: in seven large icons: sunny, slightly cl ...

  • Meade TE688W - page 21

    RF range: Maximum 100 feet (30 meters) Temperature transmission cycle: approximately 45 seconds Low battery indicator Wall-mount or Table stand Power Main unit: 2 AA size (UM-3) 1.5V batteries (not included) Remote Sensor: 2 AA size 1.5V batteries (not included) Dimensions Main unit: 3.47(L) x 7.28(H) x 1.10(D) inches/ 88(L) x 185(H) x 28(D) mm Rem ...

  • Meade TE688W - page 22

    DECLARATION OF CONFORMITY We Name: Meade Instruments Corp. Address: 27 Hubble, Irvine, CA 92618 - 4209 declare that the product Product No.: TE688W Product Name: Wireless Weather Forecaster with Indoor/ Outdoor Temperature and Humidity Manufacturer: Hideki Electronics Limited Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road, Kwai Chung, New ...

  • Meade TE688W - page 23

    STANDARD WARRANTY INFORMATION This product is warranted by Meade Instruments Corp. (MIC) to be free of defects in materials and workmanship for a period of ONE YEAR from date of original retail purchase in the U.S.A. MIC will repair or replace the product, or part thereof, found upon inspection by MIC to be defective, provided the defective part or ...

  • Meade TE688W - page 24

    Meade Instruments Corp. 27 Hubble Irvine, CA 92618 U.S.A. © 2011 Meade Instruments Corp. All Rights Reserved. All user manual contents and information are subject to change. ...

Fabbricante Meade Categoria Marine Radio

I documenti che otteniamo dal fabbricante del dispositivoMeade TE688W possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Meade
- manuali per l’uso TE688W
- schede prodotto Meade
- opuscoli
- o etichette energetiche Meade TE688W
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Meade TE688W.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Meade TE688W, manuali di manutenzione, brevi manuali o manuali utente Meade TE688W. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Meade TE688W.

Manuali per l’uso simili

Manuale completo del dispositivo Meade TE688W, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Meade TE688W dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Meade TE688W.

Il manuale per l’uso completo Meade, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Meade TE688W - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Meade TE688W, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Meade TE688W che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Meade TE688W - che ci dovrebbe aiutare nei primi passi durante l'uso Meade TE688W
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Meade TE688W
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Meade TE688W in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Meade TE688W?

Utilizza il modulo sottostante

Se non hai risolto il problema con Meade TE688W con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Meade TE688W è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)