Italiano dropdown-ico

Manuale per l’uso Brother HL-2400Ce

256 pagine 2.69 mb
Scarica

Vai alla pagina of 256

Summary
  • Brother HL-2400Ce - page 1

    I Brother Color Laser Printer HL-2400Ce series USER’S GUIDE Please read this manual thoroughly befor e using the printer. Keep this manual in a convenient pl ace for qui ck reference at all times. ...

  • Brother HL-2400Ce - page 2

    II Trademarks Brother is a registered trademark of Brother Industries, Ltd. Apple and LaserWriter are registered trademarks, and TrueType is a trademark of Apple Computer, Inc. Centronics is a trademark of Genicom Corporation. EPSON is a registered trademark, and FX-850 and FX-80 are trademarks of Seiko Epson Corporation. Hewlett-Packard, HP, PCL5C ...

  • Brother HL-2400Ce - page 3

    III (For USA & CANADA Only) For technical and operational assistance, please call: In USA 1-877-284-3238 In CANADA 1-800-853-6660 514-685-6464 (within Montreal) If you have comments or suggestions, please write us at: In USA Printer Customer Suppor t Brother International Corporation 15 Musick Irvine, CA 92618 In CANADA Brother International Co ...

  • Brother HL-2400Ce - page 4

    IV ...

  • Brother HL-2400Ce - page 5

    i Color Laser Printer HL-2400Ce series USER’S GUIDE (For USA & CANADA Only) For technical and operational assistance, please call: In USA 1-877-284-3238 In CANADA 1-800-853-6660 514-685-6464 (within Montreal) If you have comments or suggestions, please write us at: In USA Printer Customer Support Brother International Corporation 15 Musick Ir ...

  • Brother HL-2400Ce - page 6

    ii Definiti ons of Warnings, Cauti ons, and Notes The following conventions are used in this User’s Guide: Warning Indicates warnings that must be observed to prevent possible personal injury. ! Caution Indicates cautions that must be obs erved to use the printer properly or prevent dam age to the pr inter. ✒ Note Indicates notes and u seful ti ...

  • Brother HL-2400Ce - page 7

    iii Warning If metal objects, water or other liquids get inside the printer, turn the printer off immediately and unplug the printer. Contact your dealer. Warning Do not put consumables such as the Toner Cartrid ges and the Waste Toner Pack into a fire. Some consum ables can be flammable under certain conditions. Warning Do not look directly at the ...

  • Brother HL-2400Ce - page 8

    iv Printer Do's and Don'ts for Opt imum Print Quality ! Caution Before you move or lift the printer, remove the Toner Cartridges , Waste Toner Pack, Oil Bottle and Fusing Unit to avoid s pills. Be sure to keep the printer as level as possible. Damage caused by failure to remove the supplies will void your warranty. ! Caution Do not touch ...

  • Brother HL-2400Ce - page 9

    TABLE OF CONTENTS v TABLE OF CONTENTS CH A PTER 1 INTRODUCTION ABOUT T HIS MANUAL 1 -1 ABOUT THIS PRINTER 1-2 Features 1-2 Options 1-6 Operating and Storage En viron m en t 1 - 8 CH A PTER 2 SETTING UP THE PRINTER B EFORE USING THE P RINTER 2-1 Checkin g th e Co m ponents 2- 1 General V iew 2-3 SETTING UP THE P RINTER 2-4 Re m ove the Protective Pa ...

  • Brother HL-2400Ce - page 10

    USER’S GUIDE vi CH A PTER 3 BEFORE WORKING W ITH THE PRINTER AU T O M A TIC E M UL A TION SELECTION 3-1 AU T O M A TIC INTER F ACE SELECTION 3-3 ABOUT THE CONTR O L PANEL 3-5 Selecting the L o c al Language Dis p lay 3 -5 Using the P anel Buttons 3 -6 P rinter Settings 3-7 P APER HANDLING 3-8 P rint Media 3-8 Cassette Feed 3-13 Manual Feed 3 - 14 ...

  • Brother HL-2400Ce - page 11

    TABLE OF CONTENTS vii BUT T ONS IN SH IFT M ODE 4-6 4 SHIFT Button 4 -64 EMU L A T ION Button 4-65 ECONOMY Button 4-68 FEEDER Button 4 - 69 CO P Y Button 4-72 RESET Button 4 -73 T EST B utton 4-80 H E X DUM P M O D E 4 - 8 2 CH A PTER 5 M AINTENANC E REPLACING THE CONSU M ABLES 5-1 T oner Cartridg es 5 - 3 Oil Bottle 5-6 Fuser Cleaner 5- 9 W aste T ...

  • Brother HL-2400Ce - page 12

    USER’S GUIDE viii CH A PTER 6 TROUBLESHOOTING TROUBLE SHOOTI NG 6-1 Operator Call Messages 6-1 Maintenan ce Messages (appear on th e lo w er r o w) 6-3 Error Messag es 6 - 4 Service Call Messages 6-6 Paper Ja m s 6 - 9 Q & A 6-13 Setting Up the Printer Hard w are 6-13 Setting Up the P rinter 6 -14 P aper Handling 6 -15 P rinting 6-16 P rint Q ...

  • Brother HL-2400Ce - page 13

    REGULATIONS ix IMPORTANT INFORMATI ON: REGULATIONS Electronic Emi ssion Notices WITHOUT the Network Card NC-2010h, NC-2100h Federal Communications Commission(FCC) Declaration of Conformity (For U.S.A. Only) Respons ible Part y : Brother Interna tional Corporation 100 Somerset Corporat e Boulevard Bridgewater, NJ 08807-0911, U.S.A. TEL : (908) 704-1 ...

  • Brother HL-2400Ce - page 14

    USER’S GUIDE x Industry Canada Compliance Statement (For Canada Only) This Cl ass B di gital apparat us complie s with Canadi an ICES -003. Cet appareil numéri que de la class e B est conforme à la norme NMB -003 du Canada. Declara tion of Conformity (For Europe) We, Brother Industries, Ltd., 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Ja p ...

  • Brother HL-2400Ce - page 15

    REGULATIONS xi WITH the Network Card NC-2010h, NC-2100h EMC Notice Warning This is a Clas s A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Federal Communications Commission(FCC) Compliance Notice (For U.S.A. Only) This equi pment has been tested and fo ...

  • Brother HL-2400Ce - page 16

    USER’S GUIDE xii Issued by: Brother Industries, Lt d. Printer Products Divis ion Radio Interference (220-240 V M odel Only) This printer complies with EN55022(CISPR Publication 22)/Class A. Before this product is u sed, ensure that you use a doubl e-shielded interface cable with twis ted-pair conductors and that is marked “IEEE 1284 compliant? ...

  • Brother HL-2400Ce - page 17

    REGULATIONS xiii FDA Regulations (For 120 V Model Only) U.S. Food and Drug Admini strati on (FDA) has i mplemented regulat ions for l aser products manufactured on and after August 2, 1976. Compliance is mandatory for products marketed i n the United St ates. Caution : Use of controls , adjustments or performance of procedures other than those spec ...

  • Brother HL-2400Ce - page 18

    USER’S GUIDE xiv For Finland and Sweden LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT Varoitus! Laitt een käyttäminen muull a kuin täss ä käyttöohjees sa mainitul la tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Varning – Om apparaten används på annat s ätt än i denna B ruksa ...

  • Brother HL-2400Ce - page 19

    REGULATIONS xv Wiring Information (For U.K. only) Important If the mains pl ug supplie d with this printer i s not s uitable for your s ocket outlet , remove the plug from the mains cord and fit an appropriat e three pin plug. If the replacement plug is intended to take a fuse then fit the same rating fuse as the origin al. If a moulded plug is sev ...

  • Brother HL-2400Ce - page 20

    USER’S GUIDE xvi The wire which is coloured brown must be connected to the terminal that is marked with the lett er “L” or coloured red or brown. The outer sheath of the cord must b e secured inside the plug. The coloured wires should not hang out of the plug. ...

  • Brother HL-2400Ce - page 21

    CHAPTER 1 INTRODUCTION 1-1 CHAPTER 1 INTRODUCTION ABOUT THIS MANUAL This manual acts as your guide to the setup and operation of your printer and covers the foll owing topics: CHAPTER 1 INTRODUCTION provides an overview of the printer. Read this chapter first to get familiar with the printer. CHAPTER 2 SETTING UP THE PRINTER gives you general set-u ...

  • Brother HL-2400Ce - page 22

    USER’S GUIDE 1-2 ABOUT THIS PRINTER Features This print er has the foll owing standard features . 2400 x 600 DPI Class Resolution This printer prints at a default resolution of 600 dots per inch (dpi). By utilizing the 300-dpi mode, the printer can also print lower resolution data, if necessary. Moreover, you can achieve higher print quality equi ...

  • Brother HL-2400Ce - page 23

    CHAPTER 1 INTRODUCTION 1-3 Universal Media Cassette This printer loads paper automatically from the media cassette. Since the media cassette is a universal type, a number of different paper sizes can be used. Even envelopes can be loaded from the media cas sette. For detailed paper s pecifications, see ‘Paper Handling’ in Chapter 3 . Three Inte ...

  • Brother HL-2400Ce - page 24

    USER’S GUIDE 1-4 Automatic Emulation Selection This printer can automatically select the printer emulation mode depending on the print commands it receive s from the computer software. With this feature, many u sers can share the printer on a network. Data Compression Technology This printer can internally compress the received graphics and font ...

  • Brother HL-2400Ce - page 25

    CHAPTER 1 INTRODUCTION 1-5 Power Save Mode This printer has a power savi ng mode. Since las er printers consume power to keep the fixing assembly at a high temperature, this feature can save electricity when the printer is on but not bei ng used. The factory setting of the Power Save mode is ON so that it complies with the new EPA Energy Star speci ...

  • Brother HL-2400Ce - page 26

    USER’S GUIDE 1-6 Options The following options are available for this printer: Paper Handling Lower Tray Unit A lower tray unit expands the paper source capacity. You can load extra paper or different si zes of paper. You can load Lett er, A4, B5 (JIS and ISO) or Executive size (176x250 to 215.9x297mm) paper and Com10, DL size envelopes into this ...

  • Brother HL-2400Ce - page 27

    CHAPTER 1 INTRODUCTION 1-7 PCMCIA CARDS Flash Memory Card and HDD Card A commercial flash memory card or an HDD card can be installed. You can store fonts, macros , logos, and other print data in a commercial PCMCIA-compatible flash memory card or HDD card. By using the Card, you can do l ogging and custom web functi ons. You also can use the Broth ...

  • Brother HL-2400Ce - page 28

    USER’S GUIDE 1-8 Operating and Storage Environment Please note t he following requirements before using the pri nter. Power Supply Use the printer within the specified power range. AC power: ±10% of the rated power voltage Frequency: 50/60 Hz (120V or 220-240 V) The power cord, including exte nsions, s hould not exceed 5 m etres (16.5 feet). Do ...

  • Brother HL-2400Ce - page 29

    CHAPTER 1 INTRODUCTION 1-9 The following figure details the recommended area around the printer for proper v e n tilatio n , o p e ratio n an d maintenance. Front Rear Fig. 1-1 Recommended area around the Printer ✒ Note Ensure that there is enough space behind the printer so that you can eas ily access the rear cover if a paper jam occurs. ...

  • Brother HL-2400Ce - page 30

    CHAPTER 2 SETTING UP THE PRINTER 2–1 CHAPTER 2 SETTING UP THE PRINTER This chapter can also be used as a quick setup guide, which provides information for setting up the printer. BEFORE USING THE PRINTER Warning This printer i s heavy a nd weighs a pproximately 37kg (81.6 lbs). When moving or lifting this printer, be sure to do so with at least 2 ...

  • Brother HL-2400Ce - page 31

    USER’S GUIDE 2–2 ✒ Note An interface cable is not a standard accessory. Please purchase the appropriate cable for the interface you intend to use. Parallel cables should be IEEE 1284 compliant and should not exceed 1.8 meters (6 feet) in length. The power cord may d iffer slightly from this d iagram depending on the country where you purchase ...

  • Brother HL-2400Ce - page 32

    CHAPTER 2 SETTING UP THE PRINTER 2–3 General View Fig. 2-2 Front View Fig. 2-3 Rear View Top Cover Media Cassette Control Panel Front Cover Power Button Rear Side Cover Rear Access Cover Power Cord Connector Controller Card ...

  • Brother HL-2400Ce - page 33

    USER’S GUIDE 2–4 SETTING UP THE PRINTER Remove the Protect ive Parts After checking that you have all of the correct parts, temporarily place the printer where you can easily reach all sides . Remove the protective parts that secure the print er against damage during t ransportation, as shown below: ✒ Important Note It is CRITICAL that you SA ...

  • Brother HL-2400Ce - page 34

    CHAPTER 2 SETTING UP THE PRINTER 2–5 Installing the OPC Belt Cartridge ! Caution • Do not touch the green surface of the OPC Belt Cartridge. T his can degrade p rint quality . • Do not expose the OPC Belt to light (more than 800 lux) for more than appro x imately 2 minutes. It might cause damage to the OPC Belt Cartridge and voi d the warrant ...

  • Brother HL-2400Ce - page 35

    USER’S GUIDE 2–6 3. Remove the orange OPC Belt Ten sion Release Pin s from both sides of the OPC Belt Cartridge. Fig. 2-7 Remove the Pins 4. Remov e th e Protective Sheet from the OPC Belt Cartridge. Fig. 2-8 Remove the Protective Sheet 5. Insert the OPC Belt Cartridge into the printer cartridge guide with the flat side facing you. Fig. 2-9 Ins ...

  • Brother HL-2400Ce - page 36

    CHAPTER 2 SETTING UP THE PRINTER 2–7 Installing the Toner Cartridges This printer uses 4 separate color (Black, Cyan, Magenta and Yellow) toner cartridges. One of each is supplied. A new cartridge contains enough toner to print up to 10,000 (Black): 6,000 (Cyan, Magenta, Yellow) A4 or letter-size single-sided pages at about 5% coverage. (Actual t ...

  • Brother HL-2400Ce - page 37

    USER’S GUIDE 2–8 4. Install the 4 toner cartridges by positioning them in the correct guides. Each color cartridge is individually keyed to prevent improper installation. Match each cartridge color label to the corresponding color label on the printer. Fig. 2-12 Install the Toner Cartridges ! Caution • Insert the toner cartridge s gently into ...

  • Brother HL-2400Ce - page 38

    CHAPTER 2 SETTING UP THE PRINTER 2–9 Installing the Oil Bottle and the Fuser Cleaner 1. Open the Top Cover and release t he pressure on the Fusi ng Unit roll ers by pushing the Pressure Release Levers to the OPEN position ( ). Remove t he orange protective parts fitted between the rollers of the Fusing Unit ( ). Make sure that the Pressure Releas ...

  • Brother HL-2400Ce - page 39

    USER’S GUIDE 2–10 3. Place the Fuser Cleaner into the Fusing Unit with the roller s ide facing you. Fig. 2-16 Install the Fuser Cleaner 4. Lock the Oil Bottle and the Fuser Cleaner in place by turning the Oil Bottle Lock Levers. Fig. 2-17 Lock the Oil Bottle Lock Levers 5. Close the Top C over. ...

  • Brother HL-2400Ce - page 40

    CHAPTER 2 SETTING UP THE PRINTER 2–11 Loading Paper in the Media Cassett e ✒ Note This printer has a 250 sheet Media Cas sette as standard. An additional Lower Tray Unit is available as an option. Since the Media Cass ette supports universal paper types , you can place letter, A4, ISO B5 or Executive size cut sheet paper o r COM10, or DL size e ...

  • Brother HL-2400Ce - page 41

    USER’S GUIDE 2–12 To install the Media Cassette follow these step s to set the paper guides: ✒ Note • Be sure to select the same paper size in your applicat ion software, or printing erro rs will occur . If your application s oftware does not s upport paper size se lection in its print menu, you can change t he paper size with t he Mode but ...

  • Brother HL-2400Ce - page 42

    CHAPTER 2 SETTING UP THE PRINTER 2–13 2. Adjust the Paper Guides to accommodate the paper size you wish to use. Hold the shaded par ts shown below and gently slide the guides into place. Fig. 2-19 Adjust the Paper Guides 3. Load paper into the Media Cassette. ✒ Note • Adjust the tray to the correct pape r size indication arrow. If you do not ...

  • Brother HL-2400Ce - page 43

    USER’S GUIDE 2–14 Connecting the Printer to Your Computer This printer has a bi-directional parallel interface and an RS-232C serial interface. They allow the printer to communicate with IBM/PC ® or compatible comput ers. Before connect ing the printer and computer, you need to purchase a connecting cable specifically made for the interface to ...

  • Brother HL-2400Ce - page 44

    CHAPTER 2 SETTING UP THE PRINTER 2–15 3. Secure the connection to the printer with the wire clips or screws. Computer Printer Fig. 2-21 Connecting the Printer and Computer 4. Attach the other end of the interface cable to the interface connector on your computer. Be sure to tighten the connection on the computer as well. ✒ Note When you connect ...

  • Brother HL-2400Ce - page 45

    USER’S GUIDE 2–16 Turning the Printer On Installing the Power Cord and Turning the Printer On 1. Make sure that the Power button is turned OFF . The power b utton is on the front le ft side of the printer. 2. Attach the po wer co rd to the printer an d plug it into an AC outlet. Fig. 2-22 Plugging in the Power Cord 3. Turn the printer on by pr ...

  • Brother HL-2400Ce - page 46

    CHAPTER 2 SETTING UP THE PRINTER 2–17 ! Caution Always wait at le ast 5 seconds af ter turning off the power before turning it on again. Do not turn the power off while the printer is printing as this may cause a paper jam and adversely affect the printer. The printer performs self-diagnosis at start-up to check its hardware and software. If the ...

  • Brother HL-2400Ce - page 47

    USER’S GUIDE 2–18 Printing the Tes t Patterns or Lis ts You can check print quality and print a list of available fonts before you actually start working with t he printer. To do so, follow thes e st eps: 1 . Make sure that you have already installed the toner cartridges, the OPC Belt Cartridge, the Oil Bottle and the Fuser Cleaner an d have lo ...

  • Brother HL-2400Ce - page 48

    CHAPTER 2 SETTING UP THE PRINTER 2–19 6. Press the Set button. The printer starts printing the s elected test pattern or list. When the printer finishes printing, it automatically returns to the off-line mode. Press the SEL button to se t the printer back on-line. !"#$%&'()*+,-./1234567890:;@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghi ...

  • Brother HL-2400Ce - page 49

    USER’S GUIDE 2–20 Install the Printer Driver Computer Requirements The following are the minimum computer requirements to setup and operate the prin ter: CPU: 80486 or higher (Pentium recommended) RAM: 8 MB or more for Wi ndows  95/ 98, 3.1 x and Windows NT  4.0 (16 MB or more recommended) Hard Disk Drive: 10Mbyte free space available for ...

  • Brother HL-2400Ce - page 50

    CHAPTER 2 SETTING UP THE PRINTER 2–21 ✒ Notes • The installer automatically updates your SYSTEM.INI Windows  file by adding DEVICE=bi-di.386 under the [386Enh] section. If any bi- directional parall el communications device driver was ins talled previously, it will be deactivated by the new driver. If you wish to use old driver, you should ...

  • Brother HL-2400Ce - page 51

    CHAPTER 3 BEFORE WORKING WITH THE PRINTER 3–1 CHAPTER 3 BEFORE WORKING WITH THE PRINTER AUTOMATIC EMULATION SELECTI ON This printer has an automatic emulation selection function. When the printer receives data from the computer, it automaticall y selects the emulation mode. This function ha s been factory set to ON. The printer can select the emu ...

  • Brother HL-2400Ce - page 52

    USER’S GUIDE 3–2 ✒ Notes When you use the automatic emulation selection, note the following: • Once the emulation is automatically changed, it is not changed again for a short perio d of time. This time period is called “Time Out” and it can be set with the Em ulation button. The factory setting i s 5 seconds. • The EPSON or IBM emula ...

  • Brother HL-2400Ce - page 53

    CHAPTER 3 BEFORE WORKING WITH THE PRINTER 3–3 AUTOMATIC INTERFACE SELECT ION This printer has an automatic interface selection function. When the printer receives data from the computer, it automaticall y selects the bi- directional parallel, RS-232C serial interface, NC-3100h or MIO interface as appropriate. When you use the parallel interface, ...

  • Brother HL-2400Ce - page 54

    USER’S GUIDE 3–4 ✒ Notes When you use the automatic interface selection, note the following: • Once the interface is automatically changed, it is not changed again for a short perio d of time. This time period is called “Time Out” and it can be set with the Mode button. The factory setti ng is 5 s econds. • The communications paramete ...

  • Brother HL-2400Ce - page 55

    CHAPTER 3 BEFORE WORKING WITH THE PRINTER 3–5 ABOUT THE CONTROL PANEL Selecting the Local Language Display The display shows the current printer statu s. When you operate the control panel buttons, i t shows functions and sett ings. If a proble m occurs, it shows the corresponding error message. These messages are displayed in several languages. ...

  • Brother HL-2400Ce - page 56

    USER’S GUIDE 3–6 Using the Panel Buttons The printer has a versatile control panel. It has two operation mo des: When you press the buttons, they work in the NORMAL mode indicated by the function shown above the but tons. When you pr ess the butt ons with the Shift button held down, they wor k in the SH IFT mode as indicated by the function sho ...

  • Brother HL-2400Ce - page 57

    CHAPTER 3 BEFORE WORKING WITH THE PRINTER 3–7 Printer Settings There are two types of printer settin gs available on this printer: 1 . Use r Settings 2 . Factor y S etti ngs You can operate the printer with the factory default settings with the control panel settings unchanged. You may change and store personalized settings in the prin ter memory ...

  • Brother HL-2400Ce - page 58

    USER’S GUIDE 3–8 PAPER HANDLING Print Media Paper Size 1. The Standard Media C a ssette Since the Media C a ssette is a univer s al type, you can use any of the paper sizes lis ted below.. The cassett e can ho l d up to 250 sheets of pape r (75 g/m 2 or 20 lb s .) or up to 15 envelop e s (paper should be loaded only up to t h e t op l i n e on ...

  • Brother HL-2400Ce - page 59

    CHAPTER 3 BEFORE WORKING WITH THE PRINTER 3–9 paper source available size and paper type capacity Standard Media Cassette cut sheet : Letter, A4, B5(ISO), B5(JIS), Executive envelope: COM 10, DL OHP film: A4, letter other sizes: width 105-216mm (4.1 ”-8.5”) length 220-297mm (8.7 ”-11.7”) 250 15 50 Up to 250 sheets of 75g/m 2 (20 lbs.) pap ...

  • Brother HL-2400Ce - page 60

    USER’S GUIDE 3–10 Printable Area The Printable Area depends on the settings in your application. The figure below shows the physically printable area and non guaranteed print area of various paper types with thi s printer. Fig. 3-2 Printable Area and Non Guaranteed Print Area ✒ Note If you use paper that does not meet the specifications liste ...

  • Brother HL-2400Ce - page 61

    CHAPTER 3 BEFORE WORKING WITH THE PRINTER 3–11 Using Envelopes Avoid using envelopes with the following characteristics: • Glossy or shiny surfaces • Protection cover on the envelopes’ adhesive parts • Sealing flaps that have not been folded at purchase • Sealing flaps as shown below • Three or more layers of paper in the marked area ...

  • Brother HL-2400Ce - page 62

    USER’S GUIDE 3–12 Before loading envelopes in the cassette, check the following: • Envelopes should hav e a lengthw ise seal ing flap. • The sealing flaps should be c risply and correctly folded (irregularly cut or folded envelopes may cause paper jams). • Envelopes should con sist of two layers of paper in the following marked area. Fig. ...

  • Brother HL-2400Ce - page 63

    CHAPTER 3 BEFORE WORKING WITH THE PRINTER 3–13 Cassette Feed Th e printer can feed paper fro m the Media Cassette, Optional Lower Media Cassette or Optio nal Legal Cassette. ✒ Notes When you load paper into the Media Cassette, note the following : • If your application software supports paper s ize selection on the print menu, you can select ...

  • Brother HL-2400Ce - page 64

    USER’S GUIDE 3–14 Manual Feed Since this printer d oes not have a manual fe ed or multi purp ose tray, you cannot manually feed irregular sized paper.. However, thi s printer has a special Manual Feed Mode us ing Tray 1 (upper tray) to accommodate non-standard paper sizes. See “Manual Mode” in Chapter 4 for more informatio n on selecting th ...

  • Brother HL-2400Ce - page 65

    CHAPTER 4 CONTROL PANEL 4–1 CHAPTER 4 CONTROL PANEL DISPLAY AND LEDS This pri nter has one l iquid cryst al dis play (LCD) and four LEDs on the control panel. The di splay can s how various mes sages with up to 16 characters in two rows. The LEDs light to indicate the current printer status. Copy Pages Orientation Feeder Emulation Mode K Y M C To ...

  • Brother HL-2400Ce - page 66

    USER’S GUIDE 4–2 Printer Status Messages (on the upper row) The following table s hows the pri nter status messages that are di splayed during normal operation: Printer Status Message Meaning 00 READY 001P T1 The printer is ready to print. 00 IDLE 001P T1 The printer i s idl e. (BR-S cript 2 mode onl y) AUTO PCL5C The printer is off-li ne and c ...

  • Brother HL-2400Ce - page 67

    CHAPTER 4 CONTROL PANEL 4–3 Printer Status Message Meaning (Cont inued) 07 FF PAUSE The printer has suspended feeding form s. Pre ssing the Sel button resumes form feed. 08 RESET TO The prin ter is restor in g itself to the USER SETTINGS user sett ings you se lected with the panel buttons. (The message appears only momen tarily.) 08 RESET TO The ...

  • Brother HL-2400Ce - page 68

    USER’S GUIDE 4–4 Status Emulation Mode AUTO: Auto emu lation selection PCL5C: HP PCL5 C fixed BRScript: BR-Sc ript fix ed HP-GL: HP HP-GL fixed FX-850: Eps on FX-850 fixed Pro.XL: IBM Propr in ter XL LJ PRINT 002 L T1 AUTO ■ ■ ■ ■ K C M Y Copy Pages Orientation “P” ... Portrait “L” ... Landscape “p” ... Reverse Portrait “l ...

  • Brother HL-2400Ce - page 69

    CHAPTER 4 CONTROL PANEL 4–5 LEDs The LEDs light or blink to indicate the current printer status. READY LED indicatio n Meaning On Ready to print Blinki ng Warmi ng up DATA LED indicatio n Meaning On Data remains in the prin ter b u ffer. Pressin g the Form Feed button prints t he data and clears the buffer. Blinking Receiving or processing data A ...

  • Brother HL-2400Ce - page 70

    USER’S GUIDE 4–6 BUTTONS IN NORMAL MODE You can control the basic printer operations and change various printer settings in the NORMAL mode. Functi ons available i n the NORMAL mode are shown above the panel buttons. Copy Pages Orientation Feeder Emulation Mode K Y M C Toner Ready Alarm Mode Continue Font Set On Line Data S e l Form Feed Fig. 4 ...

  • Brother HL-2400Ce - page 71

    CHAPTER 4 CONTROL PANEL 4–7 ✒ Notes When you press the Sel button, remember t he following: • All other buttons —except the Sel button—are operati onal only when the printer is off-line. • If the printer is not in AUTO emulation mode, the LCD displays the current emulati on by pressing the Sel button to take it off-line, bu t you cannot ...

  • Brother HL-2400Ce - page 72

    USER’S GUIDE 4–8 MODE Button Pr essin g th e Mode button allows you t o enter modes where you can change setting s. The mo d e men u s and settin g s will vary accord ing to the current emulati on mode and options. HP PCL5C, EPSON FX-850, and IBM Proprinter XL Modes BR-Script Mode HP-GL Mode INTERFACE MODE INTERFACE MODE INTERFACE MODE Set inte ...

  • Brother HL-2400Ce - page 73

    CHAPTER 4 CONTROL PANEL 4–9 MODE Button Settings in HP PCL5C, EPSON FX-850, and IBM Proprinter XL Modes The following table shows all the selections you can choose with the Mode button in the HP P CL5C, EPSON FX-850 and IBM Proprinter XL modes. ✒ Note Th e mo de menus and settings that appear will vary according to th e current emulation mode, ...

  • Brother HL-2400Ce - page 74

    USER’S GUIDE 4–10 Mode Menu (Continued) Setting Menu Sub-Setting Menu Setting INTERFACE MODE (Continued) I/F AUTO (Continued) MIO Setting Available only when a commercial MIO card has been installed. The settings available on the installed MIO card can appear under the sub-setting menu. FORMAT MODE ORIENTATION ORI=PORTRAIT PORTRAIT or LANDSCAPE ...

  • Brother HL-2400Ce - page 75

    CHAPTER 4 CONTROL PANEL 4–11 Mode Menu (Continued) Setting Menu Sub-Setting Menu Setting DEVICE OPERATION When the commercial flash memory card, HDD card or optional HDD has been formatted: (HP mode only) EXECUTE DATA Execute the data on the DEVICE. DATA ID=##### Execute the selected data. Exit Exit to EXECUTE DATA DEVICE LIST Print the contents ...

  • Brother HL-2400Ce - page 76

    USER’S GUIDE 4–12 Mode Menu (Continued) Setting Menu Sub-Setting Menu Setting ADVANCED MODE NETWORK MODE LOCK PANEL=OFF ON or OFF PASS NO=### Enter pass number. AUTO FF=OFF ON or OFF WAIT TIME= 5s 1 to 99 seconds for AUTO ON FF SUPPRESS=OFF ON or OFF exit exit to NETWORK MODE CONTINUE MODE CONTINUE=MANUAL AUTO or MANUAL SCALABLE FONT FONT=ALL A ...

  • Brother HL-2400Ce - page 77

    CHAPTER 4 CONTROL PANEL 4–13 MODE Button Settings in BR-S cript 2 Mode The following table shows all the selections you can ch oose with the Mode butt on in the BR -Script 2 mode. ✒ Note The mode menu s and settin g s that appear will vary acco rd ing to the current emulation mode, printer status and any options that may be installed in the p r ...

  • Brother HL-2400Ce - page 78

    USER’S GUIDE 4–14 Mode Menu (Continued) Setting Menu Sub-Setting Menu Setting ADVANCED MODE NETWORK MODE LOCK PANEL=OFF ON or OFF PASS NO=### Enter pass number. AUTO FF=OFF ON or OFF WAIT TIME= 5s 1 to 99 seconds for AUTO ON FF SUPPRESS=OFF ON or OFF exit exit to NETWORK MODE ERROR PRINT ERROR PRINT=OFF ON or OFF CONTINUE MODE CONTINUE=MANUAL A ...

  • Brother HL-2400Ce - page 79

    CHAPTER 4 CONTROL PANEL 4–15 MODE Button Settings in HP -GL Mode The following table shows all the selections you can choose with the Mode button i n the HP-GL mode. ✒ Note Th e mo de menus and settings that appear will vary according to th e current emulation mode, printer status and any options that may be installed in the p rinter. Mode Menu ...

  • Brother HL-2400Ce - page 80

    USER’S GUIDE 4–16 Mode Menu (Continued) Setting Menu Sub-Setting Menu Setting PAGE PROTECTION PROTECT=AUTO AUTO, OFF, LETTER, A4, or LEGAL exit Exit to PAGE PROTECTION DEVICE OPERATION Same as BR-Script mode ADVANCED MODE Same as PCL5C mode PAGE COUNTER COUNT= 0 Shows the number of printed pages. MAINTENANCE MODE REMAIN LIFE FC=## pages Shows r ...

  • Brother HL-2400Ce - page 81

    CHAPTER 4 CONTROL PANEL 4–17 Basic Operation Procedures When you operate the Mode button , remember the follo wing basic steps: 1. Pr ess the Sel b u tto n to take the prin ter o ff-line. 2. Pr ess the Mode button to enter the MODE menus. • Press the ▲ or ▼ button to scroll forward or backward through the menus. (Press ing the Mode but ton ...

  • Brother HL-2400Ce - page 82

    USER’S GUIDE 4–18 Operation Example: Selecting the Parallel Interface To manually select the parallel interface: 1. Pr ess the Sel b u tto n to take the prin ter o ff-line. 2. Pr ess the Mode button and then press the Set Button. When you enter the interface mode, the display first shows the currently selected interface marked with an asterisk. ...

  • Brother HL-2400Ce - page 83

    CHAPTER 4 CONTROL PANEL 4–19 INTERFACE MODE The automatic interface selection has been factory set. If you want to select a specific interface manually, use interface mode to select it. Display Message Interface Mode I/F=PARALLEL Parallel interface I/F=RS-232C Serial interface I/F=EXTEND I/O Exten ded I/O interface I/F=AUTO Auto interface selecti ...

  • Brother HL-2400Ce - page 84

    USER’S GUIDE 4–20 ■ Parallel Interface When you use the parallel interface, you must set the communications mode in the followi ng sub-sett ing menu. Display Message High Speed and Bi-directional Parallel Commun ications HIGH SPEED=ON Turn on or off the high s peed parallel communi cations. BI-DIR=ON Turn on or off the bi-directional parallel ...

  • Brother HL-2400Ce - page 85

    CHAPTER 4 CONTROL PANEL 4–21 Disp lay Messag e Parame ters Settings DTR(ER) =ON (Effective when Xon/Xoff=ON) Data terminal ready (ER) ON: Makes DTR (ER) low when the buffer is full. OFF: Does not make DTR (ER) low when the buffer is fu ll. DTR(ER) goes l ow only when the prin ter is off-line. Robust Xon =OFF (Effective when Xon/Xoff=ON) Robust Xo ...

  • Brother HL-2400Ce - page 86

    USER’S GUIDE 4–22 FORMAT MODE ORIENTATION When you select “ORIENTATION”, you can set portrait or landscape orientati on. ✒ Note The ORIENTATION selection is effective in the HP PCL5C, EPSON FX-850 and IBM Proprinter XL modes . It does not work in other emulation modes . This printer can print pages in portrait or landscape orientation. Yo ...

  • Brother HL-2400Ce - page 87

    CHAPTER 4 CONTROL PANEL 4–23 AUTO MODE ✒ Note The settings in this mode menu are effective in the HP PC L5C, EP SON FX-850 and IBM P roprinter XL modes. They d o not appear in othe r emulation modes . Th e page/line term in atio n is set in this mode. Display Messag e Setting Auto Mode AUTO LF =OFF ON CR → CR+LF OFF CR → CR AUTO CR =OFF ON ...

  • Brother HL-2400Ce - page 88

    USER’S GUIDE 4–24 ✒ Note on “ AUTO MASK” When you use application software in non-HP modes, be sure to set “AUTO MASK” to ON. When you use letter or A4 size paper, the top and bottom 2 lines are masked and they do not appear on the printout. The auto modes are subject to the current emulation mode. O : The auto modes can b e set. X : ...

  • Brother HL-2400Ce - page 89

    CHAPTER 4 CONTROL PANEL 4–25 The following settings can be made in this mode: Display Mess age Page Format Mode PAPER =LETTER Set cut sheet paper size t o letter , A4 , legal, B5 , A5 or executive, or envelope size to JIS B5, COM10 or DL. LEFT M = 0C P Set the left margin at colum n 0 -126 at 10cpi. RIGHT M = 80C P Set the right margin at column ...

  • Brother HL-2400Ce - page 90

    USER’S GUIDE 4–26 ✒ Notes When you choose settings in PAGE FORMAT MODE, note the following: • Letter size has been factory set for 120V models. A4 s ize has been factory set for 220/240V models. • When you use p a p er smaller than specified in the PAGE FORMAT MODE, be sure that the print area is smaller than the paper size; otherwise the ...

  • Brother HL-2400Ce - page 91

    CHAPTER 4 CONTROL PANEL 4–27 ■ About Line Settings Setting the number of lines/page automatically sets the line spacing or line feed pitch. If the paper size is changed, the number of lines/page changes according ly. The new setting is calculated with the following expression and the remai nder, if any, is i gnored. However, the line feed pitch ...

  • Brother HL-2400Ce - page 92

    USER’S GUIDE 4–28 GRAPHICS MODE ✒ Note The settings in this mode menu are effective only in the H P-GL mode. They do not appea r in any other emulation modes. Since the HP-GL emul ation mode is for a pl otter, you can sel ect the plotter pens, the pen size and percentage of gray in th is mode menu. Display Message Graphics Mode PEN SETTING Se ...

  • Brother HL-2400Ce - page 93

    CHAPTER 4 CONTROL PANEL 4–29 ■ Character Set When you select “CHARACTER SET,” you can select the standard and alternate character sets used in the HP-GL emulation mode. Enter the sub-setting menu and select the menu for the standard or alternate character set with the ▲ or ▼ button and pre ss the Set butt on. Character Set Message on th ...

  • Brother HL-2400Ce - page 94

    USER’S GUIDE 4–30 RESOLUTION MODE The print resoluti on, Color Advanced Photoscal e Technology (CAPT) and High Resolut ion Control (HRC) can be set in this mode menu. Display Mess age Resolution Mode RESOLUTION Set the print resolution of the printer. CAPT SETTING Set the CAPT function. . HRC SETTING Set the HRC function. Select the setting men ...

  • Brother HL-2400Ce - page 95

    CHAPTER 4 CONTROL PANEL 4–31 ✒ Note • Even if you set the resolution to 600 dpi in this mode, the printer may not be able to print large and complex full color files at 600 dpi because of insu fficient memory. Ho wev er, it automatically decreases the resolution to 300 dpi to print them. While the printer is printing in this mode, the displa ...

  • Brother HL-2400Ce - page 96

    USER’S GUIDE 4–32 ■ HRC Setting When you select “HRC SETTING,” you can set the high resolution control (HRC) function which i s a special function that offers improved print quality of characters and graphics that conventional laser printers cannot attain with resolutions of 300 or 600 dpi. Display Message High Resolution C ontrol HRC =OF ...

  • Brother HL-2400Ce - page 97

    CHAPTER 4 CONTROL PANEL 4–33 PAGE PROTECTION ✒ Note The setting in this mode menu is effective in the HP PCL5C, EPSON FX- 850, IBM Proprinter XL and HP -GL modes. It does not appear in the BR - Script 2 mode. If print images are too complex to print, the printer may print them in parts or onl y on part of the page. If this occu rs, the printe r ...

  • Brother HL-2400Ce - page 98

    USER’S GUIDE 4–34 DEVICE OPERATION ✒ Notes • BE SURE TO TURN OFF THE PRINTER POWER BUTTON BEFORE INSTALLING OR REMOVING A FLASH MEMORY CARD OR HDD CARD, OR THE CARD WILL BE DAMAGED. • Settings in this mode are effective only when you have installed a flash memory card, HDD card or optional HDD and you have selected PCL5C, HP-GL, or BR-Scr ...

  • Brother HL-2400Ce - page 99

    CHAPTER 4 CONTROL PANEL 4–35 If DEVICE is selected, Display Messag e Card Operatio n FORMAT DEVICE Format a new flash memory card, HDD card or optional HDD. Exit Exit to DEVICE OPERATION When the display shows “FORMAT DEVICE,” press the Set button to format the installed card. After the printer finishes formatting the device, you must exit to ...

  • Brother HL-2400Ce - page 100

    USER’S GUIDE 4–36 ✒ Note A common use of the flash memory is with FORMS software packages. With these commercially available software packages you have an option to send a form to the printer without any data. After you have sent the form to the printer, you may save t he form in the flash memory as a Macro. Then the next time you want to pri ...

  • Brother HL-2400Ce - page 101

    CHAPTER 4 CONTROL PANEL 4–37 ■ Save Wh en you select “SAVE” and you press the Set button, you can enter the following s ub-sett ing menus t o save the macros and fonts i n the installed de vice: Display Message Save Menu SAVE DATA Save data that the printer will receive and set its ID. SAVE MACRO Save a macro. This menu appears only in the ...

  • Brother HL-2400Ce - page 102

    USER’S GUIDE 4–38 ✒ Notes When you send data to be saved on the card, it is temporarily stored in the RAM of the prin ter. No te the following: • If the received data exceeds the RAM capacity, a memory full error occurs. You can clear this error with the Continue button. W hen this error occurs, only part of the image has been stored in RAM ...

  • Brother HL-2400Ce - page 103

    CHAPTER 4 CONTROL PANEL 4–39 ✒ Note When you see an asterisk on the display, th e ID number has been used for another macro or data. I f you select th e u s ed I D n u mber, th e ol d ma c ro or data is erased and replaced with the new macro. You can execute a macro with the macro execution command. • Primary Font or S econdary Font ✒ Note ...

  • Brother HL-2400Ce - page 104

    USER’S GUIDE 4–40 ✒ Notes When you save the primary or secondary font, note the following: • The font is temporarily stored in the RAM of the printer before i t is saved on the device. If the font data exce eds the RAM capacity, a memory full error occurs. You can clear this error with the Continue button. As not all the font data ha s been ...

  • Brother HL-2400Ce - page 105

    CHAPTER 4 CONTROL PANEL 4–41 You can check the fonts saved on the card by printing the list of fonts with the Test button. See “TEST Button” in this chap ter. ✒ Note When the fonts on the HDD card are selected in a print job, they are copied into the printer RAM. It may cause a printer memory full error because those fonts occupy s ome RAM ...

  • Brother HL-2400Ce - page 106

    USER’S GUIDE 4–42 • Format Device You can format the flash memory card, HDD card or optional HDD to delete its contents. Instructio n s are in the following men u: FORMAT DEVICE When you press the Set button in this menu, the printer as ks if you want to delete all contents of the device. Then press the Set button to start formatting the devi ...

  • Brother HL-2400Ce - page 107

    CHAPTER 4 CONTROL PANEL 4–43 To lock or unlock the control panel, you must enter a 3-digit pas s number. The default setting is OFF. To turn on the lock feature, select the ON setting and press Set. Change the first digit of the number with th e ▲ or ▼ button and move to t he next digit with the Set butt on. After you finis h entering your 3- ...

  • Brother HL-2400Ce - page 108

    USER’S GUIDE 4–44 ■ Form Feed Suppress You can turn the form feed suppress functi on on or off in this men u a s follows: Display Message Form Feed Suppress FF SUPPRESS=OFF Turn off the form feed suppress function. (Factory setting) FF SUPPRESS=ON Turn on the form feed suppress function. If p ag es con tain no p r in t data, the p r inter wo ...

  • Brother HL-2400Ce - page 109

    CHAPTER 4 CONTROL PANEL 4–45 CONTINUE MODE If any recoverable error occurs, including “Toner Empty,” it can be cleared with the Continue button. The Continue button funct ion is selected with this mod e settin g . Display Message Continue Mode CONTINUE=MANUAL Select the manual error recovery mode. Press the Continue button to clear errors. ( ...

  • Brother HL-2400Ce - page 110

    USER’S GUIDE 4–46 INPUT BUFFER You can increase or decrease the capacity of the input buffer wi th the ▲ or ▼ button in th is mode men u . A larger capacity allo ws the p rinter to receive data from the computer faster. ✒ Note If the printer reports a memory full error, reduce the capacity of the input buffer. Display Message Input Buffer ...

  • Brother HL-2400Ce - page 111

    CHAPTER 4 CONTROL PANEL 4–47 SAVE SETTINGS Suppose you share this printer with other s who want different control panel sett ings. Since more than one set of user settings can be stored in the printe r’s memory, you can easily reset the printer to your preferred settings after they are changed. For resetting the printer, see “R ESET Button” ...

  • Brother HL-2400Ce - page 112

    USER’S GUIDE 4–48 Please refer to the following chart when you want to set the Time Zone . - 12.0 Eniwetok, Kwajalein - 11.0 Midway Island, Samoa - 10.0 Hawaii - 9.0 Alaska - 8.0 Pacific time (US & Canada) - 7.0 Mountain ti me (US & Canada), Ari zona - 6.0 Central time (US & Canada), Mexico City, Saskatchewan - 5.0 Eastern t ime (US ...

  • Brother HL-2400Ce - page 113

    CHAPTER 4 CONTROL PANEL 4–49 PAGE COUNTER You can check the total number of printed pages with this mode. When you enter this mode, t he display shows the number for a short time and then auto matically mo ves to “exit MODE ” menu. EXIT MODE When you finish setting your desired option in the mode m enus, advance to the followin g message: MOD ...

  • Brother HL-2400Ce - page 114

    USER’S GUIDE 4–50 FONT Button Pressing th e Font button allows you to select fonts and s ymbol/character sets. ✒ Notes When yo u use the Font button, note the foll owing: • The Font button is effective in the HP PCL5C, EPSON FX-850, and IBM Proprinter XL modes . However the sett ings are subj ect to the current emulation mode. Not e that th ...

  • Brother HL-2400Ce - page 115

    CHAPTER 4 CONTROL PANEL 4–51 To select the font and symbol set in the HP PCL5C mode, follow t hese steps: 1. Pr ess the Sel bu tto n to take the prin ter o ff-line. 2. Press the Font button and then press the ▲ or ▼ but ton to select the primary or secondary fo nt s etting menu. 3. Pr ess the Set button. The display s hows the font sett ing m ...

  • Brother HL-2400Ce - page 116

    USER’S GUIDE 4–52 5. Pr ess the Set button. When you enter the font setting mode, the display first shows the current font wi th an asterisk. 6. Press the ▲ or ▼ button until the desired font appe ars on the displa y. See “ List of Fonts ”. 7. Pr ess the Set button to make t he displayed sel ection effective. ■ If you s elect a reside ...

  • Brother HL-2400Ce - page 117

    CHAPTER 4 CONTROL PANEL 4–53 8. Press the Set button to make the dis played select ion effective, then the display shows the font s ize select ion menu. ✒ Note When you have selected fixed-pitch fon ts, you set the font size by the character pitch (width). When you have selected proportional spacing fonts, you set the font size in points (heigh ...

  • Brother HL-2400Ce - page 118

    USER’S GUIDE 4–54 Setting the Font and Character Set in the EPSON FX-850 or IBM Proprinter X L Mode When the EPSON FX-850 or IBM Proprinte r XL mode has been sel ected, the font and character set can be selected. Me ssa g e To do: SELECT FONT Set the font CHARACTER SET Set the character set TABLE PRINT Print the code table To select the font an ...

  • Brother HL-2400Ce - page 119

    CHAPTER 4 CONTROL PANEL 4–55 ✒ Notes When you select the optional fonts or permanent download fonts, note the following: • If the optional font card is not installed, the optional font cannot be selected. No selection appears on the display. • If permanent fonts are not downloaded in t he HP emulation mode or another emulation mode is selec ...

  • Brother HL-2400Ce - page 120

    USER’S GUIDE 4–56 7. Pr ess the ▲ or ▼ button until the d esired style appear s on the displa y. Display Message Font Style Lt Light Reg Regular, Roman, B ook, or Antiqu e Bd Bold or Demi Xb Extrabold It Italic o r Oblique ✒ Note The style indication appears after the font name and the style name differ s according to the font name. The i ...

  • Brother HL-2400Ce - page 121

    CHAPTER 4 CONTROL PANEL 4–57 14. When you enter the character set setting mode, the display first shows the current character set with an asterisk. ✒ Note The character set varies according to the current emulation mode. 15. Press th e ▲ or ▼ button until the character set you want appears on the di splay. Se e “ List of Symbol /Character ...

  • Brother HL-2400Ce - page 122

    USER’S GUIDE 4–58 List of Fonts Display Message Font BROUGHAM Scalable Brougham LETTERGOTHIC Scalable LetterGothic OCR-A Bitmapped OCR-A 12 cpi OCR-B Bitmapped OCR-B 12 cpi LETTERGOTH16.6 Bitmapped Letter Gothic 16.66 cpi LTRGOTH16 LTN2 Bitmapped Letter Gothic 16.66 cpi ISO 8859-1 Latin2 LTRGOTH16 LTN5 Bitmapped Letter Gothic 16.66 cpi ISO 8859 ...

  • Brother HL-2400Ce - page 123

    CHAPTER 4 CONTROL PANEL 4–59 List of Symbol/Character S ets The symbol sets and character s ets are s ubject to the current emul ation mode. HP PCL5C EPSON IBM ROMAN 8 US ASCII * PC-8 * ISO LATIN1 GERMAN PC-8 D/N ISO LATIN2 UK ASCII I PC-850 ISO LATIN5 FRENCH I PC-852 ISO LATIN6 DANISH I PC-860 PC-775 ITALY PC-863 PC-8 * SPANISH PC-865 PC-8 D/N S ...

  • Brother HL-2400Ce - page 124

    USER’S GUIDE 4–60 FORM FEED Button (REPRINT Button) Th e Form Feed button works in two ways according to the Dat a LED status. Form Feed When the printer is off-line and there i s data remaining in the printer memory, the Data LED comes on. P ressing t he Form Feed button executes a form feed and prints the remaining data. If you set the number ...

  • Brother HL-2400Ce - page 125

    CHAPTER 4 CONTROL PANEL 4–61 You can set 4 attributes (Proof, Public, Private and Print only) for each documentation through the printer driver. Documents which have the Proof, Public or Private attributes set will be stored in the HDD and you can re-print these documents whenever you like. When you want to print a document which is stored in the ...

  • Brother HL-2400Ce - page 126

    USER’S GUIDE 4–62 Th is func tio n wo rk s as follows. Proof User 1 Document 1 Action = Print / Delete C ollate = ON/OFF Copies = ### (when 'Print' is set) Document2 Document3 : User 2 Document 1 :: Public User 1 Document 1 Action = Print / Delete Collate = ON/OFF Copies = ### (when 'Print' is set) Document2 Document3 : User ...

  • Brother HL-2400Ce - page 127

    CHAPTER 4 CONTROL PANEL 4–63 CONTINUE Button If there is a prob lem with the p rinter, it autom atically suspen ds printing and goes off-line. Press ing the Continue button may ignore the error and resume printer operation. The function of th is button varies according t o the CONTINUE mode set with the Mode button. Since the CONTINUE mode has be ...

  • Brother HL-2400Ce - page 128

    USER’S GUIDE 4–64 BUTTONS IN SHIFT MODE You can control the basic printer operations and make various printer settings also in S HIFT mode. Functi ons availabl e in SHIFT mode are labeled with the indication s just below the p anel butto ns. Copy Pages Orientation Feeder Emulation Mode K Y M C Toner Ready Alarm Emulation Economy Test Shift Copy ...

  • Brother HL-2400Ce - page 129

    CHAPTER 4 CONTROL PANEL 4–65 EMULATION Button This factory setting for the automatic emulation selection function is ON. The printer will select the emulation mode automatically when it receives data from the com puter. To set the emulation mode manually, hold down the Shift button and press the Emulation button. Th en enter the setting mo d e to ...

  • Brother HL-2400Ce - page 130

    USER’S GUIDE 4–66 7. Select EPSON or IBM w ith the ▲ or ▼ button. Since the printer cannot distingui sh between the EPSON and I BM emulation modes, you must s elect the EPSON or IBM emulation even in AUTO mode. When the printer receives data from the computer, it automatically selects the emulation mode in any of the following combinations: ...

  • Brother HL-2400Ce - page 131

    CHAPTER 4 CONTROL PANEL 4–67 About Emulation Modes This printer has the fol lowing emulation modes : ■ HP PCL5C Mode Th is pr in ter em u lates Hewlett-Packard PCL5 C color p rinters and PCL6 monochrome printers. This is the default emulation setting of the printer. Since many popular software packages support t his emulation, this may be the b ...

  • Brother HL-2400Ce - page 132

    USER’S GUIDE 4–68 ECONOMY Button TONER SAVE MODE You can turn on or off the toner save mode as follows: Display Message Toner Save Mode TONER SAVE=OFF Turn off the toner save mode. (Factory setting) TONER SAVE=ON Turn on the toner save mode. The amount of toner on the paper decreases and the printed image may l ook lighter. POWER SAVE MODE You ...

  • Brother HL-2400Ce - page 133

    CHAPTER 4 CONTROL PANEL 4–69 FEEDER Button You can select the feeder and manual feed mode with the Feeder button. Display Message Feeder FEEDER=AUTO Select a feeder or auto paper feed . MANUAL MODE=ON Enable/disable the m anual feed mo de. MEDIA TYPE Select print med ia SMALL SIZE Set the small paper size detection for paper sizes under B5(JIS ) ...

  • Brother HL-2400Ce - page 134

    USER’S GUIDE 4–70 ✒ Notes When you select a feeder, note the following: • The “FEEDER=TRAY2” mes sage appears only when the optiona l lower tray unit has been installed. • The FEEDER=AUTO setting allows you to optimize your printing environment. This setting allows a print job to continue uninterrupted when a paper out condition occur ...

  • Brother HL-2400Ce - page 135

    CHAPTER 4 CONTROL PANEL 4–71 MANUAL MODE This printer has no man ual feed tray or mu lti-p urpose tray. Therefo r e y o u cannot feed special paper in the usual way. However this printer has a special Manual Feed Mode with Tray 1 to accommodate non- standard paper sizes. When “MANUAL MODE=ON” is selected or a manual feed command is sent to th ...

  • Brother HL-2400Ce - page 136

    USER’S GUIDE 4–72 COPY Button You can set the number of copies to pri nt of the same page wit h the Copy button. The job will print faster than choos ing the copy print quantity from within your application software. Check the current setting on the displa y. When the number of copies has been set to 3, the display may look as follows: LJ READY ...

  • Brother HL-2400Ce - page 137

    CHAPTER 4 CONTROL PANEL 4–73 RESET Button You can reset the printer with the Reset button. The print da ta that the printer has already received from the computer is cleared and the printer settings are restored to the user sett ings or factory settings. Any temporary download fonts and macro se ttings s elected with commands in HP PCL 5C mode ar ...

  • Brother HL-2400Ce - page 138

    USER’S GUIDE 4–74 4. Pr ess the Set button to make t he displayed sel ection effective. The printer is reset according to the selected reset mode. Selected Mode LCD message RESET PRINTER 08 RESET TO ↔ USER SETTINGS RESET SETTING 1-2 08 RESET TO ↔ SETTING # 1* FACTORY SETTINGS 09 RESET TO ↔ FACTORY SETTINGS 1* - # indicates the select ed n ...

  • Brother HL-2400Ce - page 139

    CHAPTER 4 CONTROL PANEL 4–75 Button Item Sub-Item Factory Setting MODE INTERFACE MODE – I/F=AUTO For AUTO mode TIME OUT TIME OUT= 5s For bi-directional PARALLEL interface HIGH SPEED HIGH SPEED=ON BI-DIR BI-DIR=ON For RS-232C serial interface Baud Rate BaudRate= 9600 Code Type CodeType=8 bits Parity Parity =NONE Stop Bit Stop Bit= 1 bits Xon/Xof ...

  • Brother HL-2400Ce - page 140

    USER’S GUIDE 4–76 Button Item Sub-Item Factory Setting MODE (continued) FORMAT MODE (continued) PAGE FORMAT MODE (HP PCL5C, EPSON, & IBM) PAPER LETTER (For 110/120V model) A4 (For 220/240V model) LEFT M 0 (LETTER, Portrait) 0 (LEGAL, Portrait) 0 (A4, Portrait) 0 (A5, Portrait) 0 (B5, Portrait) 0 (JIS B5, Portrait) 0 (EXE, Portrait) 0 (COM10 ...

  • Brother HL-2400Ce - page 141

    CHAPTER 4 CONTROL PANEL 4–77 Button Item Sub-Item Factory Setting MODE (continued) PAGE FORMAT (continued) LINES (HP) 60 (LETTER, PORTRAIT) 78 (LEGAL, PORTRAIT) 64 (A4, PORTRAIT) 64 (A5, PORTRAIT) 53 (B5, Portrait) 54 (JIS B5, Portrait) 57 (EXE, Portrait) 51 (COM10, Portrait) 45 (DL, Portrait) 45 (LETTER, LANDSCAPE) 45 (LEGAL, LANDSCAPE) 43 (A4, ...

  • Brother HL-2400Ce - page 142

    USER’S GUIDE 4–78 Button Item Sub-Item Factory Setting MODE (continued) RESOLUTION MODE RESOLUTION RESOLUTION=600 CAPT SETTING CAPT=OFF HRC SETTING HRC=MEDIUM PAGE PROTECTION – PROTECT=AUTO (Non-BR-Script2) ADVANCED MODE LOCK PANEL LOCK PANEL=OFF AUTO FF AUTO FF=OFF For AUTO FF=ON WAIT TIME WAIT TIME= 5s FF SUPPRESS FF SUPPRESS=OFF ERROR PRIN ...

  • Brother HL-2400Ce - page 143

    CHAPTER 4 CONTROL PANEL 4–79 Button Item Sub-Item Factory Setting ECONOMY – TONER SAVE MODE - TONER SAVE=OFF POWER SAVE MODE - POWER SAVE=ON For POWER SAVE=ON TIME OUT TIME OUT=30m FEEDER FEEDER - FEEDER=AUTO For FEEDER=AUTO AUTO=T1>T2 MANUAL MODE - MANUAL MODE=OFF MEDIA TYPE - REGULAR SMALL SIZE - SIZE=ISO B5 COPY – – COPY PAGES=1 LANGU ...

  • Brother HL-2400Ce - page 144

    USER’S GUIDE 4–80 TEST Button You can test the printer or print the list of fonts with th e Test button. To do so, hold down th e Shift button and pre ss the Test but ton. You will then enter the test mode where you can test the printer or print the list of fonts. To test the printer, follow these step s: 1. Press th e Sel button to take th e p ...

  • Brother HL-2400Ce - page 145

    CHAPTER 4 CONTROL PANEL 4–81 ✒ Note The message “PRINT FONTS C” or “PRINT FONTS P” appears only when the optional font card is instal led in the font slot or permanent download fonts are st ored in printer memory. • If the optional font card is inst alled, you can print the list of optional fonts. Since the list shows the ID numbers s ...

  • Brother HL-2400Ce - page 146

    USER’S GUIDE 4–82 HEX DUMP MODE This print er has a useful Hex Dump Mode for checking the print dat a sent from your computer. The printer lists the print data in hexadecimal form. To enter the hex dump mode, follow these steps: 1. Check the power state. 2. Operate the buttons according to the power state. • If the printer has been turned off ...

  • Brother HL-2400Ce - page 147

    CHAPTER 4 CONTROL PANEL 4–83 To exit from the hex dump mode, follow these basic steps: 1. Press the Sel button to tak e the printer off-lin e. 2. Reset the printer with the Reset button. Or turn off the printer, wait for a few secon ds, and turn it on again. ...

  • Brother HL-2400Ce - page 148

    CHAPTER 5 MAINTENANCE 5-1 CHAPTER 5 MAINTENANCE REPLACING THE CONSUMABLES You will need to rep lace the following co nsumables period ically. When the time co mes t o replace consumables, th e following messages will app ear on the LCD pane l. The printer will stop printing when the following Operator Call M essages are displayed: LCD Operator Call ...

  • Brother HL-2400Ce - page 149

    USER’S GUIDE 5-2 The following are Maintenance Mes sages and appear on the lower row of the LC D in On Line mode. These messages advise you that you will need to replace each of the consumables as soon as possible, since the consumable end of life has been reached. The printer will continue printing when any of these messages are displayed: LCD M ...

  • Brother HL-2400Ce - page 150

    CHAPTER 5 MAINTENANCE 5-3 ✒ Note • If you use paper that is not a direct equivalent for the specified paper, consumable and part life may be reduced. • The Projected Life for each of the items listed are based on an average of 5% coverage of the printable area using any color toner cartridge. Frequency of replacement will vary depending on th ...

  • Brother HL-2400Ce - page 151

    USER’S GUIDE 5-4 Replacing the Toner Cartridges ! Caution When replacing the Toner C artridges, handle t hem carefully so that toner does n ot spill. ✒ Note To ensure optim um print q u a lity , u se genuine Brother to ner cartridges. Third party toner cartridges may not work in your printer. To obtain genu i ne B ro t her supplies, consult the ...

  • Brother HL-2400Ce - page 152

    CHAPTER 5 MAINTENANCE 5-5 5. Insert the new Toner Cartridge(s) by positioning it in the correct guide(s). Slide it gently into the prin ter. Do not try to lock or push them in; they must rest loosely in the guide rails. Note that each color cartridge is individually keyed to prevent improper installation. Match each cartridge color label to the cor ...

  • Brother HL-2400Ce - page 153

    USER’S GUIDE 5-6 Oil Bottle Oil Bott le Low Message When the Oil has almost run out , the following message appears on th e LCD panel. Prepare a new Oil Bottle to r eplace the nearly empty bottle. After this messa ge appears, you can print approximately 30 pages: FUSER OIL LOW Oil Bottle Empty Message When the Oil compl etely runs out, the follow ...

  • Brother HL-2400Ce - page 154

    CHAPTER 5 MAINTENANCE 5-7 3. Release the Oil Bottle Lock Levers as shown below: Fig. 5-5 Release the Oil Bottle Lock Levers 4. Remov e t he empty Oil Bottle from the Fu sing Unit. Hold a sheet of paper under the Oil Bottle and lift it out of the F using Unit. Move the bottle toward the right hand side of the printer, so that the oil will not spill ...

  • Brother HL-2400Ce - page 155

    USER’S GUIDE 5-8 5. Install the new Oil Bottle in to th e Fusing Unit with the label facin g the front of the printer. This will en able the Oil Bottle to fit in to the cutout in the top of the Fusing Unit . Fig. 5-7 Install the Oil Bottle 6. Lock the Oil Bo ttle Lock Levers secu rel y. 7. Close the Top C over. 8. Press the Power b u tto n to tur ...

  • Brother HL-2400Ce - page 156

    CHAPTER 5 MAINTENANCE 5-9 Fuser Cleaner Fuser Cleaner Message When the following message appears on the L CD panel, you will need a replacement Fuser Cleaner: REPLACE FCR Fuser Cleaner Change Message When the following message appear s on the LCD panel and the printer stops printing, you must replace the Fuser Cleaner: 24 CHANGE FCR Replacing the F ...

  • Brother HL-2400Ce - page 157

    USER’S GUIDE 5-10 4. Take the Fus er Cleaner out of the Fus ing Unit by holding the han dle of the Fuser Cl eaner as shown below : Fig. 5-9 Removing the Fuser Cleaner 5. Install the new Fuser Cleaner into the guide with the roller side facing you. Fig. 5-10 Installing the Fuser Cleaner 6. Lock the Fuser Cleaner with th e Oil Bo ttle Lock Levers. ...

  • Brother HL-2400Ce - page 158

    CHAPTER 5 MAINTENANCE 5-11 Waste Toner Pack Approximately every 12,000 images you print at 5% coverage, you m ust change the Waste Toner Pack. Waste Toner Pack Full Message When the Wes t Toner Pack is full, the fol lowing message appear s on the LCD panel and the printer will stop printing. When you see th is message, you must replace the Wast e T ...

  • Brother HL-2400Ce - page 159

    USER’S GUIDE 5-12 1. Open the Front C over. 2. Remove the Was te Toner Pack from the holder l ocated at the lower right side of the printer. Be careful not to spill the toner. Fig. 5-11 Take the Waste Toner Pack out 3. Peel off the seal ing sticker on t he left side of t he Waste Toner P ack. Seal the opening with the sealing sticker. See Fig. 5- ...

  • Brother HL-2400Ce - page 160

    CHAPTER 5 MAINTENANCE 5-13 OPC Belt Cartridge OPC Belt Cartridge Message When the OPC Belt Cartridge runs out, the following message appears on the LCD panel. When you see this message, you must replace the OP C Belt Cartr idge: REPLACE OPC BELT ! Caution • Do not touch the surface of the OPC Belt Cartridge. If you touch it, it could degrade prin ...

  • Brother HL-2400Ce - page 161

    USER’S GUIDE 5-14 4. Remove the OPC Belt Cartridge from the printer. Fig. 5-14 Removing the OPC Belt Cartridge 5. Remove the Tension Re lease Pins from both sides of the new OP C Belt Cartridge . Fig. 5-15 Removing the Tension Release Pins 6. Remove the protective sheet from the new OPC Belt Cartridge. Do not touch the green part of the OPC Belt ...

  • Brother HL-2400Ce - page 162

    CHAPTER 5 MAINTENANCE 5-15 7. Insert the new Belt Cartridge into the printer guides with the flat side facing you. Fig. 5-17 Inserting the new Belt Cartridge 8. Press the Belt Cartridge Lock Levers on both s ides of the OPC Be lt Cartridge to the rear to lock the cartridge into the printer. 9. Clos e the Front C over and the Top Cover. 10. Press th ...

  • Brother HL-2400Ce - page 163

    USER’S GUIDE 5-16 Ozone Filter Ozone Filter You will need to rep lace the Ozone Filter once a year t o prevent o z one from coming out of the printer. ! Caution You must replace the Ozone Filter once a year. If you do not, it might cause a noticeable smell of Ozone. Replacing the Ozone Filter 1. Slide and remove the Rear Side Cover. Fig. 5-18 Rem ...

  • Brother HL-2400Ce - page 164

    CHAPTER 5 MAINTENANCE 5-17 Fusing Unit Fusing Unit When the following message appear s on the LCD panel, you must replace the Fusing Un it: REPLACE FUSER Warning The Fusing Unit and the part s around it are H O T!. Be sure to wait until the Fusing Unit has cooled down sufficiently before replacing the Fusing Un it. If you touc h the HOT parts, you ...

  • Brother HL-2400Ce - page 165

    USER’S GUIDE 5-18 ✒ Note If you begin using a new Fusing Unit immediately, poor print quality may result. Please wait for 30 minutes after installing a new Fusing Unit to allow the oil to circulate c ompletely through to the Heat Roller . 4. Remove the Fusi ng Unit from the pri nter by holding the handl es on both sides. Fig. 5-21 Removing the ...

  • Brother HL-2400Ce - page 166

    CHAPTER 5 MAINTENANCE 5-19 7. Place the retaining clips into the holes in the Fusing Unit and secure them with the two screws. Fig. 5-23 Secure the retaining clips 8 . Release t he Fusing unit by pushi ng the Pressure R elease Levers to the OPEN posit ion ( ). Rem ove the oran ge protective parts fitted between th e rollers of the Fusin g Unit ( ). ...

  • Brother HL-2400Ce - page 167

    USER’S GUIDE 5-20 12 . Press th e Power button and turn on the printer. 13 . Press th e Sel butt on and take the printer Off Li ne. 14 . Press th e Reset butt on while holdi ng down the Shift button. 15 . When you se e “RESET PRINTER” o n the LCD panel, p ress th e ▲ (UP) or ▼ (DOWN) button and select “RESET PAR TS LIFE” . Press the S ...

  • Brother HL-2400Ce - page 168

    CHAPTER 5 MAINTENANCE 5-21 120K Kit 120K Kit When you see the following message on the LCD panel, you must replace the items located in the 120K Kit, which includes the Drum Cleaner, Paper Discharger, Transfer Roller, Paper Feeding Roller, Separator Pad and the Trans fer Drum. ✒ Note • User replacement of some of the following 120K Kit parts is ...

  • Brother HL-2400Ce - page 169

    USER’S GUIDE 5-22 Replacing the Drum Cleaner 1. Press the Po wer button and turn the printe r Off. 2. Open the Top Cover. 3. R emove the Drum Cleaner C over. Fig. 5-25 Opening the Cover 4. Remove the Drum Cleaner by gently pushing the handle away from you until it releases and then lift it out of the printer. Fig. 5-26 Removing the Drum Cleaner ...

  • Brother HL-2400Ce - page 170

    CHAPTER 5 MAINTENANCE 5-23 5 . Install the new Drum Cleaner int o th e printer by g e ntly plac ing the brass bearings into the guides and pushing the handle down until the bearings click into place. Ensure that the Drum Cleaner is free to move slightly upwards (rotating slightly around the bearings) in the housing after you h ave installed it. Fig ...

  • Brother HL-2400Ce - page 171

    USER’S GUIDE 5-24 Paper Discharger ! Caution Do NOT touch the charging wire! Fig. 5-28 Charging Wire Replacing the Paper Discharger 1. Open the Rear Access Cover. 2. Remove the Paper Disc harger from the Transfer Unit by lightly pre ssing it down and then sliding it to the right to release it from the catches. Hold the right hand side of the Disc ...

  • Brother HL-2400Ce - page 172

    CHAPTER 5 MAINTENANCE 5-25 3. Install the new Paper Discharger into the Transfer Unit in the reverse order that you removed it. Fig. 5-30 Installing the Paper Discharger ...

  • Brother HL-2400Ce - page 173

    USER’S GUIDE 5-26 Replacing the Transfer Roller 1. Release the green Transfer Roller Lock Lever and lift the Lever to release the Transfer Roller. Fig. 5-31 Releasing the Lock Lever 2. Remove the Transfer Roller by gently pulling the right ha nd side upwards. Slide the Transfer roller to the right to remove it. Fig. 5-32 Taking out the Transfer R ...

  • Brother HL-2400Ce - page 174

    CHAPTER 5 MAINTENANCE 5-27 3. Install the new Tran sfer Roller by in serting the left s ide opening of the Transfer Roll er into the pin on the left rear side of the un it. Adjust the p osition of the Lock lever to allow the rig ht side of the Transfer Roller to slip into the holder. Fig. 5-33 Installing the Transfer Roller 4. Lock the Transfer R o ...

  • Brother HL-2400Ce - page 175

    USER’S GUIDE 5-28 CLEANING THE PRINTER Clean the printe r exterior and interi or periodically wit h a dry soft cloth. If the printed page gets stained w ith toner, clean the printer interior with a dry soft cl oth. Cleaning the P rinter Ex terior Clean the printer ex terior as follows: 1. Turn off the printer and unplug the power cord. 2. Remove ...

  • Brother HL-2400Ce - page 176

    CHAPTER 5 MAINTENANCE 5-29 Periodic Printer Cleaning Every 20,000 pages printed or every 12 months, we recommend cleaning the following parts w ith a dry cloth. Clean the Paper Guide and Registration Roller to prevent paper jams. Fig. 5-35 Paper Guide and Registration Roller Clean the Exit Roller after op ening th e To p Cover sligh tly . Th is wil ...

  • Brother HL-2400Ce - page 177

    USER’S GUIDE 5-30 REPACKING AND RELOCATING THE PRINTER ! Caution • • • • Whenever you transport the printer ALWAYS use the packing materials that were provided with your printer. Follow the steps detailed below to re-pack the printer or the printer may be damaged. This will v oid the printer’s warranty. • Before you ship or move the p ...

  • Brother HL-2400Ce - page 178

    CHAPTER 5 MAINTENANCE 5-31 OPTIONS Lower Tray Unit Loading Paper from the Lower Media Cassette The lower tray unit is a device that funct ions as a second paper source. It can hold a maximum of 250 sheets of paper (160 g/m 2 or 43 lbs). To purchase the optional lower tray unit, please consult the dealer where you purchased the printer. With the low ...

  • Brother HL-2400Ce - page 179

    USER’S GUIDE 5-32 3. Pull out the connection cable located at the left rear side of the Lower Tray Unit. Fig. 5-39 Pulling out the Connection Cable 4. Check the three alignment pins on the Lower Tray Unit. U se two people to lift the printer and place it onto the Lower Tray Unit . Be sure to use the handhold s located at the bottom four corners o ...

  • Brother HL-2400Ce - page 180

    CHAPTER 5 MAINTENANCE 5-33 6. Remove the Connect or Cover of the printer. Fig. 5-42 Remove the Cover 7. Insert the connection cable into the printer’s connector. Fig. 5-43 Inserting the Connection Cable 8. Remove the Connector Cover of t he Lower Tray Unit and fit it to the printer so tha t it covers the connector part. Fit t he Connector Cover o ...

  • Brother HL-2400Ce - page 181

    USER’S GUIDE 5-34 9. Install the covers on both sides of the Lower T ra y Unit. Fig. 5-45 Installing the Cover ✒ Note Do not load B5 or smaller size paper and envelopes in the cassette loaded into the op tional Lower Tray Un it. It may cause pa p er jams. ...

  • Brother HL-2400Ce - page 182

    CHAPTER 5 MAINTENANCE 5-35 Font Card, Flash Memory /HDD Card Installing a Font Card, Flash Memory Card and HDD Card This printer has two slots for an optional font cartridge and one slot for an optional font card, flash memory card or HDD card. (Type III HDD cards will only fit into card slot 2.) If you have installed optional font card(s), you can ...

  • Brother HL-2400Ce - page 183

    USER’S GUIDE 5-36 The following type of flash memory card can be installed: • 4 Mbyte : Fujits u MB98A81273 • 8 Mbyte : Fujits u MB98A81373 • 16 Mbyte : Fujitsu MB98A81473 • 32 Mbyte : Fujitsu MB98A81573 • 1 Mbyte : AMD AMC001CFLKA • 2 Mbyte : AMD AMC002CF LKA • 4 Mbyte : AMD AMC004CF LKA • 10 Mbyte : AMD AMC010CFLKA • 4 Mbyte : ...

  • Brother HL-2400Ce - page 184

    CHAPTER 5 MAINTENANCE 5-37 Selecting the Optional Fonts After you have installed the optional font card, you can select optional fonts by any of the following methods: 1. Through your application software 2. With a font selection command 3. With the Font bu tton When you select fonts through your application software, follow the instructions specif ...

  • Brother HL-2400Ce - page 185

    USER’S GUIDE 5-38 3. Select the font with the Font button. See “FONT button” in Chapt er 4 . Network Option NC-3100h Some models of this printer may include an N C-3100h net work card as standard. Install ing NC-3100h enables you to u se the print er in the following environments: (TCP/IP, IPX/SPX, AppleTalk, DLC/LLC, VINES, LAT, NetB EUI) Al ...

  • Brother HL-2400Ce - page 186

    USER’S GUIDE 5-40 5. Insert the NC-3100h connector into the connector between the guide rails and secure with th e two screws. Fig. 5-49 Installing the NC-3100h Controller 6. Secure the NC-3100h with the Lock B ar. Fig. 5-50 Securing the NC-3100h with the Lock Bar ...

  • Brother HL-2400Ce - page 187

    USER’S GUIDE 5-40 7. Re-install the main controller board into the printer by sliding it into the guide rails. Fig. 5-51 Installing the Main Controller Board 8. Secure the main co ntroller board with th e two screws. 9. Connect the network cable to the NC-3100h Card. 10. Connect the AC power cord and turn on the printer. 11. For more details on h ...

  • Brother HL-2400Ce - page 188

    CHAPTER 5 MAINTENANCE 5-41 Modular I/O Card Before instal ling an NC-2010h/ 2100h Network card, please note t he following info rm atio n . Before NC-2010h/2100h Installation (USA) When you install the NC-2010h/2100h Ethernet interface card, this printer complies with the limits for a Class A dig ital device, pur suant to Part 15 of the FCC Rules. ...

  • Brother HL-2400Ce - page 189

    USER’S GUIDE 5-42 2 . Remove the two screws and cover plate from the MIO interface slot. 3 . Unpack the MIO card an d hold it by its edge. ✒ Note Do not touch the card surface. If static electricity collects, it damages the card. 4 . Insert the card until it is securely seated. 5 . Secure the MIO card with the two captive screws on the card. 6 ...

  • Brother HL-2400Ce - page 190

    CHAPTER 5 MAINTENANCE 5-43 The following cap acity of DIMM can be installed: • 16 Mbyt e TECHW ORKS PM-HP 16M-BR • 32 Mbyt e TECHW ORKS PM-HP 32M-BR • 64 Mbyt e TECHW ORKS PM-HP 64M-BR • 12 8 Mbyt e TECHWORKS PM-HP 128M-BR In general, the DIMM must have the following specifications: Type: 100 pin and 32 bit output CAS Latency: 2 or 3 Clock ...

  • Brother HL-2400Ce - page 191

    USER’S GUIDE 5-44 2. Unscrew the two screws securing the rear plate of the main controller board and pull out the main controller board. Fig. 5-53 Removing the Main Controller Board 3. Unp ack the DIMM and hold it by its edge. ! Caution Do not touch the memory chips and the surface of the main controller board. If static electricity collects, it ...

  • Brother HL-2400Ce - page 192

    CHAPTER 5 MAINTENANCE 5-45 ✒ Notes • When you install less than tw o DIMMs, be s ure to install them in the order Slot 1and t hen Slot2. • When you install different capacities of DIMMs, be s ure to install the larger capacity DIMM in Slot1 and smaller capacity DIMM in Slot2. 6 . Refit the main controller board into the printer by sliding it ...

  • Brother HL-2400Ce - page 193

    USER’S GUIDE 5-46 HDD (Hard Disk Drive) 1. Turn off the printer and unplug the power cord from the AC outlet. 2. Unscrew the two screws securing the rear plate of the main controller board and pull out the main controller board. Fig. 5-56 Secure the controller board 3. Insert the 4 pillars into the bottom of the 2.5-inch HDD. Fig. 5-57 Insert the ...

  • Brother HL-2400Ce - page 194

    CHAPTER 5 MAINTENANCE 5-47 5. Fit the 4 HDD pillars into the 4 hol es of the main controller board, and secure the pillars with the screws provid ed from the rear of th e PCB. Fig. 5-59 Set the HDD 6. Conn ect the flat cable to the mai n c ontr oller boar d . Fig. 5-60 Insert the flat cable ...

  • Brother HL-2400Ce - page 195

    USER’S GUIDE 5-48 7. Install the main controller board into the printer by sliding it into the guide rails. Fig. 5-61 Install the main controller board 8. Secure the main controller board wi th the 2 screws. 9. Connect the printer interface cable, AC power cord and turn the printer on. 10. Format the HDD from the control panel. See Chap te r 4 fo ...

  • Brother HL-2400Ce - page 196

    CHAPTER 6 TROUBLESHOOTING 6–1 CHAPTER 6 TROUBLE SHOOTING TROUBLESHOOTING If any problems occur, the printer automatically stops printing, diagnoses the problem, and display s the corresponding m essage to al ert you. Take the appropriate action, referring to the following tables. If you cannot clear the problem, consult the dealer where you purch ...

  • Brother HL-2400Ce - page 197

    USER’S GUIDE 6–2 Operator Call Message Meaning Action XX LOAD PAPER ***** SIZE The wrong size of paper was loaded in th e Media Cassette. XX is T1/ T2. Load the requested size of paper in th e Med ia Cassette and press the Form Feed button. T1 MANUAL FEED ***** SIZE The printer is reques ting you to load paper manually. Load the requested size ...

  • Brother HL-2400Ce - page 198

    CHAPTER 6 TROUBLESHOOTING 6–3 Maintenance Messages (appear on th e lower row) Error Message Meaning Action FUSER OIL LOW Th e Oil in th e Oil Bottle is almost empty. Replace the Oil Bo ttle. REPLACE FCR It is time to re place the Cleaning Roller. Replace the Cleaning Roller. REPLACE OPC BELT It is time to replace t he OPC Belt Cartr idge. Replace ...

  • Brother HL-2400Ce - page 199

    USER’S GUIDE 6–4 Error Messages Error Message Meaning Action 32 BUFFER ERROR Input buffer overflow Reset the printer or turn off and on the printer. 34 MEMORY FULL Work memory overflow Press the Continue button to resume printin g. If the same error should occur after you press the Continue button, turn off the printer. Wait a few seconds, then ...

  • Brother HL-2400Ce - page 200

    CHAPTER 6 TROUBLESHOOTING 6–5 Error Message Meaning Action 42 DEVICE1(2/3) FULL Card in slot 1 or 2 or HDD overflow Delete unneces sary macros or fo nts, or use a new device. 43 DEVICE1(2/3)W ERROR Card in slot 1 or 2 or HDD write error Set the write protect button of the card to OFF if it has been set to ON. Use a new card. If the same error occ ...

  • Brother HL-2400Ce - page 201

    USER’S GUIDE 6–6 Service Call Messages When any of the following messages appear on the LCD, turn the printer Off , wait 5 seconds and then turn the print er On again. If this does not clear the problem, consult your dealer or our authorized se rvice representative. Service Call Message Meaning Action 61 PROG ERROR Program ROM checksum error Tu ...

  • Brother HL-2400Ce - page 202

    CHAPTER 6 TROUBLESHOOTING 6–7 Service Call Message Meaning Action 88 WARNING D3 C switching clutch error Turn off the printer. Wait a few seconds, then turn it on again. 88 WARNING D4 K switching clutch error Turn off the printer. Wait a few seconds, then turn it on again. 88 WARNING D5 K,Y switching solenoid error Turn off the printer. Wait a fe ...

  • Brother HL-2400Ce - page 203

    USER’S GUIDE 6–8 Service Call Message Meaning Action 88 WARNING F2 Ozone fan error Turn off the printer. Wait a few seconds, then turn it on again. 88 WARNING F4 Fuser fan error Turn off the printer. Wait a few seconds, then turn it on again. 88 WARNING F5 Charge HV unit error Turn off the printer. Wait a few seconds, then turn it on again. 88 ...

  • Brother HL-2400Ce - page 204

    CHAPTER 6 TROUBLESHOOTING 6–9 Paper Jams This printer has been designed to be trouble free. However, if a problem should occur, note the display message and take the appropriate action. This sec tion describe s the acti ons to be taken against paper jams and unsatisfactory printouts. Paper Jam If paper jams i n the printer, i t stops printi ng an ...

  • Brother HL-2400Ce - page 205

    USER’S GUIDE 6–10 After you have followed the instructions, the printer automatically resumes printing. However, th e Data LED may come on and the following mess age may appear on the display: 07 FF PAUSE After a paper jam has occurred, data usually remai ns in the printe r memory. The message prompts you to execute a form feed and print the re ...

  • Brother HL-2400Ce - page 206

    CHAPTER 6 TROUBLESHOOTING 6–11 3 . Close the Rear Access Cover. 4. Reset the Fusing unit Pressure Release Levers and close the Top Cover. ✒ Note When paper jams at the Rear Access Cover increase, replace the Paper Discharger. ■ Paper Jam at Fusin g Roller insid e th e printer 13 JAM INSIDE or 13 JAM DRUM If a paper jam occurs at the Fusing Ro ...

  • Brother HL-2400Ce - page 207

    USER’S GUIDE 6–12 ! Caution • Do not touch the toner surface of the jammed paper. It might stain your hands or clot hes. • After removing the jammed paper, if the next printed paper is stained with toner, print several test page s before restarting your print job. • Remove the jammed paper carefully to prevent sprea ding toner. • Take c ...

  • Brother HL-2400Ce - page 208

    CHAPTER 6 TROUBLESHOOTING 6–13 Q & A This section contains commonly asked questions and the answers concerning your HL-2400Ce printer. If you have encountered a problem, find your question below and f ollow the recommended ste ps: Setting Up the Printe r Hardware Question Recommendat ion The printer does not come on. Check the followi ng; • ...

  • Brother HL-2400Ce - page 209

    USER’S GUIDE 6–14 Setting Up the Printe r Question Recommendat ion I cannot print from my application s oftware. • Make sure the suppl ied Windows printer driver is installed correctly and selected in your application software. I cannot print the entire page. • Check to see if the size of paper in the feeder is the same as the one that you ...

  • Brother HL-2400Ce - page 210

    CHAPTER 6 TROUBLESHOOTING 6–15 Paper Handling Question Recommendat ion The printer does not load paper. • Check to see if the Alarm LED is on. If so, the Media Casse tte may be out of paper or not properly installed. If it is empty, load a new stack of paper into the Media Cassette. • If th ere is paper in the Med ia Cassette, m ake sure that ...

  • Brother HL-2400Ce - page 211

    USER’S GUIDE 6–16 Printing Question Recommendat ion The printer prin ts unexpected ly or it prints incorrect characters. • Cancel the pr int job from your computer. Then, turn on and off the printer or reset the printer and try your print job again. • Make sure your applicati on software is correct ly set up to use this printer and check th ...

  • Brother HL-2400Ce - page 212

    CHAPTER 6 TROUBLESHOOTING 6–17 Print Quality ✒ Note You can resolve a print quality problem by replacing a toner cartridge with a new one if the LCD indicates the ‘toner low’ or ‘toner empty’ message. Question Recommendat ion White hori zontal line s or bands or rubbing ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ...

  • Brother HL-2400Ce - page 213

    USER’S GUIDE 6–18 Question Recommendat ion Black vertical streaks or band s ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz ...

  • Brother HL-2400Ce - page 214

    CHAPTER 6 TROUBLESHOOTING 6–19 Question Recommendat ion Toner scatter or Toner s tain ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqr ...

  • Brother HL-2400Ce - page 215

    USER’S GUIDE 6–20 Question Recommendat ion Uneven density appears periodically in t he horizontal direction ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 012345 ...

  • Brother HL-2400Ce - page 216

    CHAPTER 6 TROUBLESHOOTING 6–21 Question Recommendat ion Off set image ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEF ...

  • Brother HL-2400Ce - page 217

    USER’S GUIDE 6–22 ! Caution Operation of the printer outside the specifications shall be deemed abuse and all repairs thereafter shall be the sole liability of the end user/purchaser. (For USA & CANADA Only) For technical and operational assistance, please call: In USA 1-877-284-3238 In CANADA 1-800-853-6660 514-685-6464 (within Montreal) I ...

  • Brother HL-2400Ce - page 218

    APPENDICES Appendix–1 A PPENDICES PRINTER SPECIFICA TIONS Printing Print Meth od Electrophot ography by sem icondu ctor laser beam scanning Lase r W av elen gth : 780 nm Ou t p ut : 5 mW ma x . Resol uti on 300x300 do ts per inch (D r aft) 600x600 do ts per inch (Fine) 1200x600 dot s per inch 2400x600 dot s per u sing C APT and HRC(The resolution ...

  • Brother HL-2400Ce - page 219

    USER’S GUIDE Appendix–2 Functions CPU VR4310 Emulation Au tomatic emulation selection • HP Color Printer (PCL5C ) including HP LaserJet 4+ (PCL 5e) and HP L aserJet 5 (PCL 6) mon o ch r ome mo d e • BR- Script Lev el 2 (Adobe Pos tscript Lev el 2 compatible) •H P - G L • EPSON FX-850 • IBM Propr inter XL Interface Autom atic interface ...

  • Brother HL-2400Ce - page 220

    APPENDICES Appendix–3 Electrical and Mechanical Po w er Source U.S. A . an d Can ada: A C 120 V , 50/60 Hz Europe an d Au stralia: A C 220 to 240 V , 50/60 Hz Po w er Co n s u m pti on Pri n ti ng ( A v era g e): 450 W or l ess Sta n d - b y : 150 W or less Sta n d - b y i n s leep m ode: 35 W or le ss Noise Pri n ti ng : 55 d B A or less Sta n d ...

  • Brother HL-2400Ce - page 221

    USER’S GUIDE Appendix–4 P A PER SPECIFICA TIONS Pap e r Input M e dia Trays : • Standard u pper tray (T ray 1) • Optional lo wer tray (Tray 2) • Paper size: TRA Y 1: L etter , A4, ISO B5, JIS B5, Executive, A5, COM10, DL an d ISO B5 TRA Y 2: Letter , A4, ISO B5, JIS B5, Executive, A5, (Legal for Optional Legal Cassette) • Max. stacking ...

  • Brother HL-2400Ce - page 222

    APPENDICES Appendix–5 T est prin ting on paper , especially enve lopes, is recomm ended before maki ng a large p urchase. The follow ing ty pes of en velopes are not recom men ded for us e. • Enve lopes w ith t hick an d/or crooked edg es • Damaged, cu rled, w rinkled, or irregu larly shaped envelop es • Extre mely shiny or highly textured ...

  • Brother HL-2400Ce - page 223

    USER’S GUIDE Appendix–6 ✒ Note The manufacturer doe s not warrant the use of any particular pape r. The operator is respo nsible for the q uality of paper used with the printer . Paper T ypes to A void Som e ty pes of paper m igh t not perform well or m ay cause dam age to you r printer . T ypes of paper to avoid are: 1. Highly textured pape ...

  • Brother HL-2400Ce - page 224

    APPENDICES Appendix–7 5. Envel opes w ith cl asps, sn aps or tie st ri ngs . 6. Enve l opes m ade with sm ooth or shiny paper . 7. Enve lope s tha t a re ro ugh, highly textured , or d eeply embossed . 8. Envelopes that do not lie flat or that are curled , wrinkled, or irregularly shaped. 9. Enve lope s having an op en flap with an adhesive that ...

  • Brother HL-2400Ce - page 225

    USER’S GUIDE Appendix–8 INTER F A CE SP ECIFIC ATIONS Bi-directional Parallel Interface Interface Connector A sh ielded cable t hat i s IEEE 1284 compliant w ith the followi ng pi n assignm ent shou ld be used. Most standard parallel cables suppor t bi- directional communication, but some m ight have incompatible pin assig nm ents or m ay not b ...

  • Brother HL-2400Ce - page 226

    APPENDICES Appendix–9 Signal Description Pin No. Signal Nam e IN/OUT Explanation 1D A T A S T R O B E IN Data is latched at the leading edge of this signal. 2 - 9 DA T A 0 - 7 IN P arallel 8 bit data 10 ACKNLG OUT Data reception is com pleted and the printer is ready f or the next data reception w hen this signal becomes low . 11 BUSY OUT T he pr ...

  • Brother HL-2400Ce - page 227

    USER’S GUIDE Appendix–10 Parallel Cable Connection for IBM- PC/A T or Compatible Computers and IB M-PS/2 Computers Signal Printer Pin No. Computer Pin No. DA T A ST ROBE 11 DA T A 0 2 2 DA T A 1 3 3 DA T A 2 4 4 DA T A 3 5 5 DA T A 4 6 6 DA T A 5 7 7 DA T A 6 8 8 DA T A 7 9 9 ACKNL G 10 10 B U S Y 11 11 PE 12 12 SLC T 13 13 AUTO FEED 14 14 GND ...

  • Brother HL-2400Ce - page 228

    APPENDICES Appendix–11 RS-232C Serial Int erface Standard Specifications 1) Baud rate: 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600 or 115200 baud 2) Synchronizatio n: Start-sto p 3) Comm unication s con t rol: No protocol 4) Data lengt h: Seri al 7 bit s or 8 bit s 5) Parity: Odd, even, or non e 6) Sto p bit: 1 or 2 stop bits 7) Pr ...

  • Brother HL-2400Ce - page 229

    USER’S GUIDE Appendix–12 Signal Description Signal Name IN/OUT Explanatio n FG – Frame Gro und SD OUT Sen d Data. RD IN Receive Data. Receives data transmitted f rom the compu ter . RS OUT Req uest T o Send. “SP ACE” level w hen the printer is ready to send data to the comput er. DR IN Data Set Read y . When DSR is at “SP ACE” level, ...

  • Brother HL-2400Ce - page 230

    APPENDICES Appendix–13 Serial Cable Connection for IBM-PC/A T or Compatible Computers and IB M-PS/2 Computers The follow ing diag rams sho w the pin conne ctions for t he mo st common serial comm unications. ■ DB-9 Serial Connection When y ou use a computer with a 9-pin serial port, use a cab le with the following pin co nfiguratio ns. Printer ...

  • Brother HL-2400Ce - page 231

    USER’S GUIDE Appendix–14 Netw ork Interface Network Int erface Fig. A-3 10/100Base TX Port Pin Assignment RJ45 pi n Sign al 1 TX+ Transmit Data + 2 TX − Transm it Data − 3 RX+ Receive Data + 4N . C . 5N . C . 6 RX − Receiv e Data − 7N . C . 8N . C . For more inf ormation , see the “N etwork User ’ s Guide” on the CD- ROM. 1 2 4 3 ...

  • Brother HL-2400Ce - page 232

    APPENDICES Appendix–15 SY M BOL/CH A R A CTER SETS Y ou can select the s y mbol and character set s with the F ON T s witch in the HP L aserJet , EPSON FX - 850, and IBM Proprint er X L e m ulation m odes. See “FONT Button” in Chapter 4. When y ou have selected the HP-GL e mulatio n mode , y ou ca n select the standard or alternate character ...

  • Brother HL-2400Ce - page 233

    USER’S GUIDE Appendix–16 HP PCL Mode Roman 8 ( 8U) ISO Latin1 (0N) ISO Latin2 (2N) ISO Latin5 (5N) ...

  • Brother HL-2400Ce - page 234

    APPENDICES Appendix–17 PC-8 (10U) PC-8 D/N (1 1U) PC-850 (12U) PC-852 (17U) ...

  • Brother HL-2400Ce - page 235

    USER’S GUIDE Appendix–18 PC-8 Tu rk ish (9T) W indow s Lat in1 (19U) W indow s Lat in2 (9E) W in dow s L atin 5 (5T) ...

  • Brother HL-2400Ce - page 236

    APPENDICES Appendix–19 Legal (1U ) V entura Math (6M) V entura I ntl (13J ) V entura U S (14 J) ...

  • Brother HL-2400Ce - page 237

    USER’S GUIDE Appendix–20 PS Math (5M) PS T ex t (10J) Math-8 (8M) Pi Fon t (15U) ...

  • Brother HL-2400Ce - page 238

    APPENDICES Appendix–21 MS Pub lishing (6J ) W indow s 3.0 (9U) Desktop (7J) MC T ext (12J) ...

  • Brother HL-2400Ce - page 239

    USER’S GUIDE Appendix–22 Sy m bol (19M) W in di n gs (579L) The follow ing table s how s characters avail able only in the correspond ing character set. The num bers at the top of the table are hexadecimal code values w ith which characters are to be replaced in the Ro man 8 character set. For other characters, see the R oman 8 character set. S ...

  • Brother HL-2400Ce - page 240

    APPENDICES Appendix–23 EPSON Mode US ASCII The follow ing table s how s characters avail able only in the correspond ing character set. The num bers at the top of the table are hexadecimal code values w ith which characters are to be replaced in the US A S CII character set. For other characters, see the US A SCII ch aracter set. CHARACTER SET 23 ...

  • Brother HL-2400Ce - page 241

    USER’S GUIDE Appendix–24 PC- 8 PC- 8 D/N PC- 850 PC- 852 ...

  • Brother HL-2400Ce - page 242

    APPENDICES Appendix–25 PC- 860 PC- 863 PC- 865 PC- 8 T ur ki sh ...

  • Brother HL-2400Ce - page 243

    USER’S GUIDE Appendix–26 IBM Mode PC- 8 PC- 8 D/N PC- 850 PC- 852 ...

  • Brother HL-2400Ce - page 244

    APPENDICES Appendix–27 PC- 860 PC- 863 PC- 865 PC- 8 T ur ki sh ...

  • Brother HL-2400Ce - page 245

    USER’S GUIDE Appendix–28 HP-GL Mode ANSI ASCI I 9825 CHR. SET ...

  • Brother HL-2400Ce - page 246

    APPENDICES Appendix–29 FRENCH/GERMA N SCANDINA VIA N SP ANISH/LA TIN JIS A S CII ...

  • Brother HL-2400Ce - page 247

    USER’S GUIDE Appendix–30 ROMAN8 EXT . ISO IR V ISO SWEDISH ISO SWEDISH:N ...

  • Brother HL-2400Ce - page 248

    APPENDICES Appendix–31 I S O NORW A Y 1 ISO GERMAN ISO FRENCH ISO U.K. ...

  • Brother HL-2400Ce - page 249

    USER’S GUIDE Appendix–32 ISO IT A LIA N ISO SP ANISH ISO POR TUGUESE I S O NORW A Y 2 ...

  • Brother HL-2400Ce - page 250

    APPENDICES Appendix–33 Sy mbol Sets Supported b y the Printe r ’s Intellifont Compatible T ypefaces PCL Symbol Set Typeface Alaska Antique Brougham Cleveland Connect- Guatemala Letter Set ID Symbol Set Oakland Cond. icut Antique Gothic 8 U Roman-8 • • • • • • • 0 N ISO 8859-1 Latin1 • • • • • • • 2 N ISO 8859-2 Latin ...

  • Brother HL-2400Ce - page 251

    USER’S GUIDE Appendix–34 PCL Symbol Set Typeface(Continued) LetterGothic Mary- Oklahoma PC PC Utah Utah Set ID Symbol Set 16.66** land Brussels Tennessee Cond. 8 U Roman-8 • • • • • • • 0 N ISO 8859-1 Latin1 • • • • • • • 2 N ISO 8859-2 Latin2 • • • • • • • 5 N ISO 8859-9 Latin5 • • • • • • ...

  • Brother HL-2400Ce - page 252

    APPENDICES Appendix–35 Sy mbol Sets Supported b y the Printe r ’s True Type™ an d T ype 1 Font Compatible, and Original T ypefaces PCL Symbol Set Typeface Atlanta BR Copen- Calgary Helsinki Portugal Tennes- W Set ID Symbol Set Symbol hagen see Dingbats 8 U Roman-8 • • • • • • 0 N ISO 8859-1 Latin1 • • • • • • 2 N ISO 8 ...

  • Brother HL-2400Ce - page 253

    USER’S GUIDE Appendix–36 PCL Symbol Set Typeface Bermuda Script Germany San Diego US Roman Set ID Symbol Set 8 U Roman-8 • • • • 0 N ISO 8859-1 Latin1 • • • • 2 N ISO 8859-2 Latin2 5 N ISO 8859-9 Latin5 6 N ISO 8859-10 Latin6 1 0 U PC-8 • • • • 1 1 U PC-8 D/N • • • • 1 2 U PC-850 • • • • 1 7 U PC-852 2 6 ...

  • Brother HL-2400Ce - page 254

    INDEX I-1 INDEX A Alarm LED 4-5 Auto Form Feed 4-43 Auto Mode 4-23 Automatic Emulation Selection 1-4 , 3-1 Automatic Interface Selection 1-3 , 2-14 , 3-3 , 4-19 B Belt Cartridge Lock Lever 2-5 , 5-13 bitmapped fonts 4-52 BR-Net 1-6 BR-Script 2 Mode 4-13 , 4-67 C Card Operation 4-34 Cassette Feed 3-13 Character Set 4-29 charging wire 5-24 Color Adva ...

  • Brother HL-2400Ce - page 255

    USER’S GUIDE I-2 Input Buffer 4-46 interface cable 2-14 interface connector 2-14 interface mode 4-19 L LCD 4-1 LED 4-5 Legal Cassette 1-6 Line Settings 4-27 list internal or resident fonts 2-18 optional cartridge/card fonts 2-18 permanent download fonts 2-18 printer settings 2-18 List of Factory Settings 4-74 List of Fonts 4-58 List of Symbol/Cha ...

  • Brother HL-2400Ce - page 256

    INDEX I-3 Standard Media Cassette 2-11 , 3-8 , 3-9 T Tension Release Pin 5-14 Test button 4-80 Test Pattern 2-18 TIME SETTINGS 4-47 Time Zone 4-48 Toner Cartridge 2-7 , 5-3 Toner Save Mode 1-5 , 4-68 Transfer Roller 5-26 Transfer Roller Lock Lever 5-26 U (UP) button 4-7 User Settings 3-7 W Waste Toner Pack 5-11 Waste Toner Pack Holder 5-12 Windows ...

Fabbricante Brother Categoria Printer

I documenti che otteniamo dal fabbricante del dispositivoBrother HL-2400Ce possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Brother
- manuali per l’uso HL-2400Ce
- schede prodotto Brother
- opuscoli
- o etichette energetiche Brother HL-2400Ce
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Brother HL-2400Ce.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Brother HL-2400Ce, manuali di manutenzione, brevi manuali o manuali utente Brother HL-2400Ce. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Brother HL-2400Ce.

Manuali per l’uso simili

Manuale completo del dispositivo Brother HL-2400Ce, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Brother HL-2400Ce dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Brother HL-2400Ce.

Il manuale per l’uso completo Brother, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Brother HL-2400Ce - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Brother HL-2400Ce, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Brother HL-2400Ce che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Brother HL-2400Ce - che ci dovrebbe aiutare nei primi passi durante l'uso Brother HL-2400Ce
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Brother HL-2400Ce
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Brother HL-2400Ce in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Brother HL-2400Ce?

Utilizza il modulo sottostante

Se non hai risolto il problema con Brother HL-2400Ce con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Brother HL-2400Ce è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)