-
Severin WK 3307 - page 1
3 6 1 2 3 4 5 ...
-
Severin WK 3307 - page 2
Dear Customer, Before using the appliance, the user should read the following instructions carefully. Connection to the mains supply The appliance should only be connected to an earthed socket installed in accordance with the regulations. Make sure that the supply voltage corresponds with the voltage marked on the rating label. This product complie ...
-
Severin WK 3307 - page 3
Thermal safety cut-out The preset thermal safety cut-out protects the heating element from overheating should the appliance be erroneously switched on without any water, or if the heating element is calcified. Once the safety cut-out has switched off the kettle, it must be allowed to cool down sufficiently, or must be descaled before it is switched ...
-
Severin WK 3307 - page 4
Guarantee This product is guaranteed against defects in materials and workmanship for a period of two years from the date of purchase. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the ...
-
Severin WK 3307 - page 5
...
-
Severin WK 3307 - page 6
...
-
Severin WK 3307 - page 7
To avoid eyestrain, do not sit too close to the product. Take a rest for at least five (5) minutes after using the monitor for one (1) hour. This reduces eye fatigue. Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations. • Otherwise, it may fall and cause personal injury and/or d ...
-
Severin WK 3307 - page 8
The batteries (and rechargeable batteries) are not ordinary re- fuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling. • The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the batter ...
-
Severin WK 3307 - page 9
Do not put any heavy objects on the product. • This may result in personal injury and/or damage to the prod- uct. Safety Instructions ...
-
Severin WK 3307 - page 10
Introduction Package Contents Note Please make sure the following items are included with your LCD Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Checking the Contents of the Package Remove the lock from the package box, as shown in the figure above. Lift up the package box by holding the groov ...
-
Severin WK 3307 - page 11
...
-
Severin WK 3307 - page 12
...
-
Severin WK 3307 - page 13
...
-
Severin WK 3307 - page 14
...
-
Severin WK 3307 - page 15
DVI IN (PC Video Connection Terminal) Use a DVI Cable (DVI-D to DVI-D) - DVI mode (Digital PC) DVI/RGB/HDMI AUDIO IN (PC/DVI/ HDMI(PC) Audio Connection Terminal (In- put)) AV/COMPONENT AUDIO IN [L- AUDIO- R] Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [ L- AUDIO - R ] port of the LCD Display. DVI OUT • Connect a monitor to ano ...
-
Severin WK 3307 - page 16
your digital output device using a HDMI ca- ble. Up to HDMI cable 1.0 can be supported. BNC OUT [R, G, B, H, V] (BNC Terminal (Output)) BNC (Analog PC) Connection: connecting the R, G, B, H, V ports. The number of LCD Displays that can be connected to the loopout depends on the ca- bles, signal source, etc. With cables or signal source where there ...
-
Severin WK 3307 - page 17
...
-
Severin WK 3307 - page 18
...
-
Severin WK 3307 - page 19
...
-
Severin WK 3307 - page 20
...
-
Severin WK 3307 - page 21
...
-
Severin WK 3307 - page 22
Using the DVI (Digital) connector on the video card. • Connect the DVI Cable to the DVI port on the back of your LCD Display and the DVI port on the computer. Using the HDMI (digital) output on the graphics card. • Connect the HDMI IN port on the monitor to the HDMI port on the PC using the HDMI cable. Note When the HDMI cable to the PC, ensure ...
-
Severin WK 3307 - page 23
Using the BNC (Analog) connector on the video card. (Applicable to the UX-2 model only) • Connect the BNC/COMPONENT IN port on the monitor to the BNC port on the PC using the BNC to BNC cable. Connect the audio cable for your LCD Display to the audio port on the back of the LCD Display. Connect the power cord for your LCD Display to the power por ...
-
Severin WK 3307 - page 24
...
-
Severin WK 3307 - page 25
...
-
Severin WK 3307 - page 26
...
-
Severin WK 3307 - page 27
...
-
Severin WK 3307 - page 28
1. Connect the DVI output terminal of a digital output device to the HDMI IN terminal of the LCD Display using a DVI to HDMI cable. 2. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite jack to the DVI / RGB /HDMI AUDIO IN terminal of t ...
-
Severin WK 3307 - page 29
...
-
Severin WK 3307 - page 30
Connect the LAN cable. Note Applicable to the UXN-2 model only. Connecting a USB device Note • You can connect USB devices such as a mouse or keyboard. • Applicable to the UXN-2 model only. Connections ...
-
Severin WK 3307 - page 31
...
-
Severin WK 3307 - page 32
Note This monitor driver is certified by Microsoft, and installing it will not damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft ® Windows Vista™‚ Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click ( Start) and &q ...
-
Severin WK 3307 - page 33
...
-
Severin WK 3307 - page 34
...
-
Severin WK 3307 - page 35
1. Insert CD into the CD-ROM drive. 2. Click "Start" → "Control Panel", then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...". 4. Click the "Properties" button on the "Monitor" tab and select " ...
-
Severin WK 3307 - page 36
7. Click the "Browse" button then choose A:(D:Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button. Note This monitor driver is under certifying MS logo, and this instal ...
-
Severin WK 3307 - page 37
...
-
Severin WK 3307 - page 38
If you can see the "Digital Signature Not Found" window, then click the "Yes" button. Then click the "Finish" button and the "Close" button. Microsoft ® Windows ® Millennium Operating System 1. Click "Start", "Setting", "Control Panel". 2. Double click the "Display" i ...
-
Severin WK 3307 - page 39
...
-
Severin WK 3307 - page 40
...
-
Severin WK 3307 - page 41
...
-
Severin WK 3307 - page 42
...
-
Severin WK 3307 - page 43
1. The Multiple Display Control is originally set to COM1. 2. If any port other than COM1 is used, COM1 throug h COM4 c an be selected in the Port Selection Menu. 3. If the exact port name that is co nnected to the LCD Display using a serial c able is not selected, communication will be unavailable. 4. The selected port is stored in the program and ...
-
Severin WK 3307 - page 44
...
-
Severin WK 3307 - page 45
...
-
Severin WK 3307 - page 46
• PC Mode ...
-
Severin WK 3307 - page 47
...
-
Severin WK 3307 - page 48
...
-
Severin WK 3307 - page 49
...
-
Severin WK 3307 - page 50
...
-
Severin WK 3307 - page 51
PIP Size 1. Click PIP of the main icons and the P IP control screen appears. Click Select All or use Check Box to select a display to control. Info Grid shows some basic information necessary to PIP Size Contro l. 1) PIP Size - Shows the current PIP Si ze of the display in use. 2) OFF - Turns off the PIP of the s elected display. 3) Large - Turns o ...
-
Severin WK 3307 - page 52
...
-
Severin WK 3307 - page 53
Settings Picture 1. Click Settings of the main icons an d the Settings Control screen appears. Info Grid shows some basi c information necessary to Se ttings Control. When each func tion is select ed, the set value of the selected function is displayed in the slide.When selected, each function fetches the value for the set and displays it on the sl ...
Hai una domanda su Severin WK 3307?
Utilizza il modulo sottostante
Se non hai risolto il problema con Severin WK 3307 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Severin WK 3307 è probabile che voglia condividere il modo di risolverlo.