Manuale per l’uso GE DIGITAL ENERGY LP 33

57 pagine 1.15 mb
Scarica

Vai alla pagina of 57

Summary
  • GE DIGITAL ENERGY LP 33 - page 1

    GE Consumer & Industrial Power Protection Operating Manual Uninterruptible Power supply Digital Energy™ LP 33 Series 50 & 60 kVA 208 VAC UL / Series 0 GE Cons umer & In dustrial SA General Electric Company CH – 6595 Riazzino (Locarno) Switzerland T +41 (0)91 / 850 51 51 F +41 (0)91 / 850 51 44 www.gedigitalenergy.com GE imagination ...

  • GE DIGITAL ENERGY LP 33 - page 2

    Modifications reserv ed Page 2/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA Model: LP 33 Series / 50 & 60 kVA / Series 0 Date of issue: 06/01/2007 File name: OPM_LPS_3UO_50K_60K_0US_V010 Revision: 1.0 Identification No. Up-dating Revision Concerns Date COPYRIGHT © 2007 by GE Consumer & Industrial All r ...

  • GE DIGITAL ENERGY LP 33 - page 3

    Modifications reserv ed Page 3/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA Dear Customer , We thank you for selecting our products and are pleased to count you amongst our very valued customers at GE . We trust that the use of the LP 33 Series Uninterruptible Power Supply system, developed and produced to the ...

  • GE DIGITAL ENERGY LP 33 - page 4

    Modifications reserv ed Page 4/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA Preface Congratulations on your choice of a LP 33 Series Uninterruptible Power Supply (UPS). It will help eliminate load disturbances due to unexpected power problem. This Installation Guide describes how to prepare the inst allation si ...

  • GE DIGITAL ENERGY LP 33 - page 5

    Modifications reserv ed Page 5/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA Table of contents Page 1 SAFETY RULES ................................................................................................................... ............................. 6 2 INTRODUCTION ................................... ...

  • GE DIGITAL ENERGY LP 33 - page 6

    Modifications reserv ed Page 6/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 1 SAFETY RULES With this document, GE gives to the user all the necessary inform ation about the correct use of the UPS. We recommend that this manual be kept next to the UPS for future references. If any problems are encountered with t ...

  • GE DIGITAL ENERGY LP 33 - page 7

    Modifications reserv ed Page 7/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA SAVE THESE INSTRUCTIONS This manual contains import ant instructions for models LP 33 Series / 50 & 60 kVA that should be followed during installation and maintenance of the UPS and battery. GENERAL - Move the UPS in an upright posi ...

  • GE DIGITAL ENERGY LP 33 - page 8

    Modifications reserv ed Page 8/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA Safety symbols and warnings Safety warnings The text of this manual contains some warnings to avoid risk to the persons and to avoid damages to the UPS system and the supplied critical loads. The non-observance of the warnings reminding ...

  • GE DIGITAL ENERGY LP 33 - page 9

    Modifications reserv ed Page 9/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 2 INTRODUCTION 2.1 GENERAL DESCRIPTION The LP 33 Series Unin terruptible Power Supply (UPS) provides the energy su pply for critical loads which need a reliable, continuous free from voltage disturbances and frequency flu ctuations supp ...

  • GE DIGITAL ENERGY LP 33 - page 10

    Modifications reserv ed Page 10/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 3 DESCRIPTION 3.1 BLOCK DIAGRAM AND MAIN ELEMENTS DESCRIPTION Fig. 3.1-1 UPS block diagram The Uninterruptible Power Supply System LP 33 Series / 50 & 60 kVA can be divided into the following main elements: Electronics The UPS is d ...

  • GE DIGITAL ENERGY LP 33 - page 11

    Modifications reserv ed Page 11/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 3.2 OPERATION MODES This section describes the different p ossible operatio n modes of the UPS explain ing the function of the main modules of the UPS. VFI (Voltage Frequency I ndependent) Mode operation Under normal conditions the loa ...

  • GE DIGITAL ENERGY LP 33 - page 12

    Modifications reserv ed Page 12/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA Automatic b ypass operation In VFI (Voltage Frequency Independent) ope ration mode, the load is permanently supplied by the i nverter but, in case of trouble on the inverter , or when overload or short-circuit on the output occur, if t ...

  • GE DIGITAL ENERGY LP 33 - page 13

    Modifications reserv ed Page 13/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA Manual bypass operation The manual bypass circuit consisting of Q1 and Q2 manual switches, permits the transfer of the load directly to the mains without interruption, leaving the UPS galvanically separated from the output load . This ...

  • GE DIGITAL ENERGY LP 33 - page 14

    Modifications reserv ed Page 14/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 3.3 RPA PARALLEL SYSTEM The RPA (Redundant Parallel Architecture) allows t o extend the unit to a parallel system with 2, 3, or 4 units LP 33 Series connected on the same bus, which ensure the highest reliability rate and increase th e ...

  • GE DIGITAL ENERGY LP 33 - page 15

    Modifications reserv ed Page 15/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 3.4 UPS PARALLELED ON THE SAME BATTERY NOTE ! A parallel system with a Common Ba ttery for two or mo re UPS , requires a particular installation and adequate setting of so me parameters, (accessible only through password), and can ther ...

  • GE DIGITAL ENERGY LP 33 - page 16

    Modifications reserv ed Page 16/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 3.5 SERVICE AND TECHNICAL SUPPORT For any request of technical support please contact the supplier who provided the system. Stamp of your De aler or local responsible of the Technical Assistance (see page 3)   Fig. 3.5-1 Identifi ...

  • GE DIGITAL ENERGY LP 33 - page 17

    Modifications reserv ed Page 17/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 3.6 RECYCLING AT THE END OF SERVICE LIFE NOTE ! This product has been designed to respect the environment, using materials and components respecting eco-design rules. It does not contain CFCs (Carbon Fluor Clorid) or HCFCs (Halogen Car ...

  • GE DIGITAL ENERGY LP 33 - page 18

    Modifications reserv ed Page 18/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 4 LAYOUT 4.1 LAYOUT LP 33 Series / 50 & 60 kVA Fig. 4.1-3 Control panel Fig. 4.1-1 General view Fig. 4.1-4 Q1 & Q2 switches BC Battery cabinet CI Customer Interface Board (optional) Q1 UPS output switch Q2 Manual bypass switch ...

  • GE DIGITAL ENERGY LP 33 - page 19

    Modifications reserv ed Page 19/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 5 SYSTEM HANDLING 5.1 CONTROL PANEL Fig. 5.1-1 Control panel LCD screen Shows the UPS system data, events messages and UPS s etting. The data is displayed on 4 rows, 20 characters each, allowing the operator to select between 7 languag ...

  • GE DIGITAL ENERGY LP 33 - page 20

    Modifications reserv ed Page 20/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 5.2 COMMAND PUSH BUTTONS AND SWITCHES Total off Press simultaneously the keys “ Alarm ” and “ - ” on the panel. This will cause the opening of all contactors ( K4 , K6 and K7 ), shutdown of booster , Inverter , battery- charger ...

  • GE DIGITAL ENERGY LP 33 - page 21

    Modifications reserv ed Page 21/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 6 LCD SCREEN Shows the UPS system data, events messages and UPS setting. The data is displayed on 4 rows, 20 characters ea ch, allowing the operator to select between 7 languages: English, Germ an, French, Span ish, Italian, Finnis h a ...

  • GE DIGITAL ENERGY LP 33 - page 22

    Modifications reserv ed Page 22/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA MAINS f=60.0Hz U1=120V U2=119V U3=121V 1. Mains input voltage information screen. 2. Mains input frequency. 3. Mains line vo ltage L1 (A) and L2 (B)phases. 4. Mains line vo ltage L3 (C) phase. RECTIFIER f=60.0Hz U1=120V U2=119V U3=121V ...

  • GE DIGITAL ENERGY LP 33 - page 23

    Modifications reserv ed Page 23/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 6.2 EVENT SCREENS (Alarm) Each of the following listed alarms or messages can be displayed on the LCD screen or transmitted to a PC through the serial port RS232 or the SNMP card (optional) . Entering the Alarm mode, the LCD scre en di ...

  • GE DIGITAL ENERGY LP 33 - page 24

    Modifications reserv ed Page 24/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA Code Alarm Meaning 4118 BATTERY FAULT During battery test the DC vo ltage falls unde r the critical level. If the boost voltage has not been reached within 24 hours, then the charge voltage re turns to floating voltage. Battery test is ...

  • GE DIGITAL ENERGY LP 33 - page 25

    Modifications reserv ed Page 25/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA Code Alarm Meaning 4520 NO INVERTER POWER The load supplied by utility is over 100%. The load remains blocked on utility as long as alarm overload is active. 4530 LOAD LOCKED ON MAINS Load is locked on mains becaus e 3 transfers on mai ...

  • GE DIGITAL ENERGY LP 33 - page 26

    Modifications reserv ed Page 26/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 6.2.2 Messages list Are defined messages : all the recorded events which are referred to the operation st atus coherent with the normal situation of the UPS. Code Message Meaning 4111 RECTIFIER MAINS OK Rectifier input mains is again w ...

  • GE DIGITAL ENERGY LP 33 - page 27

    Modifications reserv ed Page 27/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA Code Message Meaning 4362 INVERTER OFF The command to switch OFF the inverter has been done by the control panel or automati cally for alarm detection. 4411 BYPASS MAINS OK Bypass input mains is again wi thin the admitted tolerance (vo ...

  • GE DIGITAL ENERGY LP 33 - page 28

    Modifications reserv ed Page 28/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA Code Message Meaning 4602 Q1 OPEN The auxiliary contact indicate s that the output switch Q1 has been opened. 4603 Q1 CLOSED The auxiliary contact indicate s that the output switch Q1 has been closed. 4699 BATTERY TEST IMPOSSIBLE Not p ...

  • GE DIGITAL ENERGY LP 33 - page 29

    Modifications reserv ed Page 29/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 6.2.3 Event report LP 33 Series In case of failure or malfunction, before call ing the nearest Service Center please note the most important identification data of your U PS and the most recent events disp layed. In order to make the d ...

  • GE DIGITAL ENERGY LP 33 - page 30

    Modifications reserv ed Page 30/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 6.3 MENU SCREENS (Menu) Pressing the menu keypad a series of screens will be displa yed, permitting the user to set some functions of the UPS, to restore the command tot al off , to perform the LEDs TEST , and to switch the inverter ON ...

  • GE DIGITAL ENERGY LP 33 - page 31

    Modifications reserv ed Page 31/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 6.3.1 User parameters screen This screen allows the user to modify some paramet ers permitting to adapt some functions of the UPS to his/her needs, de scribed as follows. This screen can be accessed by entering MENU/PARAMETER MENU/LEVE ...

  • GE DIGITAL ENERGY LP 33 - page 32

    Modifications reserv ed Page 32/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 3. Telephone numbers set-up Tel1: Tel1 enabled: N Tel2: Tel2 enabled: N Tel1 : This parameter specifies a first tel. number to be used for modem dial-out. The telephone number has a maximum of 39 characters and cannot contain intermedi ...

  • GE DIGITAL ENERGY LP 33 - page 33

    Modifications reserv ed Page 33/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 2. d1 ÷ d7: Enabling time in function of weekdays . For the weekdays from d1 to d7 ( Saturday to Friday ) the edit mode (edit day) allows to define time intervals when the UPS is operating in ECO Mode . The hour is given in 24-hour fo ...

  • GE DIGITAL ENERGY LP 33 - page 34

    Modifications reserv ed Page 34/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA Example 4 : If the ECO Mode must be enabled on Monday ( d3 ) and Tuesday ( d4 ) between 18:00 in the evening and 06:00 of the following morning, on Friday ( d7 ) between 12 :00 and 13:00, during all Saturday ( d1 ) and on Sunday ( d2 ) ...

  • GE DIGITAL ENERGY LP 33 - page 35

    Modifications reserv ed Page 35/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 7 OPERATION 7.1 PROCEDURES FOR SINGLE LP 33 Series 7.1.1 Start-up of the LP 33 Series Before connecting hazar dous voltages, make sure that: • The conne ction to the electrical system ha s been performed by qualified personnel; • T ...

  • GE DIGITAL ENERGY LP 33 - page 36

    Modifications reserv ed Page 36/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 3. Switch On th e output switch Q 1 (Pos. I) . The output will be supplied by the mains through the bypass. LP 33 60kVA APPLICAT. O N UTILITY = xx% Verify, selecting the screen METERING/ Udcp and Udcn , that the booster voltage has rea ...

  • GE DIGITAL ENERGY LP 33 - page 37

    Modifications reserv ed Page 37/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 7.1.2 UPS shutdown with load transfer on manual bypass (Q2) The purpose of this procedure is to supply the load directly b y mains through manual bypass Switch Q2 . This procedure is normally perfor med when the UP S must be completely ...

  • GE DIGITAL ENERGY LP 33 - page 38

    Modifications reserv ed Page 38/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 6. In order to disch arge the DC link capacitors, st art once more the inverter through the screen : MENU/COMMAND MENU/ INVERTER ON COMMAND MENU INVERTER O N * INVERTER OFF Remark : command INVERTER ON will be enabled only when the inv ...

  • GE DIGITAL ENERGY LP 33 - page 39

    Modifications reserv ed Page 39/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 7.1.3 Start-up following the operation on manual bypass (Q2) This procedure presupposes that the load is powered by the manual bypass switch: • The inverter is switched OFF; • The manual bypas s switch Q2 is switched ON (pos . I); ...

  • GE DIGITAL ENERGY LP 33 - page 40

    Modifications reserv ed Page 40/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 7.1.4 Complete shutdown As a result of this procedu re the UPS is completely switched OFF and not powered. NOTE ! This procedure involves all equipment powered by UPS, to be shut down. 1. Perform the command total off . 2. Switch OFF t ...

  • GE DIGITAL ENERGY LP 33 - page 41

    Modifications reserv ed Page 41/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 7.1.5 Restore t o normal operation after “total off” NOTE ! Make sure about UPS status with “ total off” activate, & Q1 closed, Q2 open and the battery breaker Q3 in ON in battery cabinet. View of the panel after pressing t ...

  • GE DIGITAL ENERGY LP 33 - page 42

    Modifications reserv ed Page 42/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 7.1.6 Restore to normal operation after “EPO – Emergency Power Off” NOTE ! Make sure about UPS status with “ EPO” activate of, & Q1 closed, Q2 open and the battery breaker Q3 in ON in battery cabinet. View of the panel af ...

  • GE DIGITAL ENERGY LP 33 - page 43

    Modifications reserv ed Page 43/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 7.2 PROCEDURES FOR PARALLEL SYSTEM LP 33 Series 7.2.1 Parallel System start-up of the LP 33 Series Before connecting hazar dous voltages, make sure that: • The conne ction to the electrical system ha s been performed by qualified per ...

  • GE DIGITAL ENERGY LP 33 - page 44

    Modifications reserv ed Page 44/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 3. Switch ON the out put switch Q1 (Pos. I) on each unit . When the la st Q1 w i l l b e c l o s e d , t h e o u t p u t w i l l b e s u p p l i e d b y the mains through all byp ass . LP 33 60kVA P1 APPLICAT. O N UTILITY = xx% Verify, ...

  • GE DIGITAL ENERGY LP 33 - page 45

    Modifications reserv ed Page 45/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 7.2.2 Parallel UPS shutdown with load tr ansfer on manual bypass (Q2) The purpose of this procedure is to supply the load directly by mains through manual bypass Q2 . This procedure is normally perfor med when the UP S must be complete ...

  • GE DIGITAL ENERGY LP 33 - page 46

    Modifications reserv ed Page 46/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 6. In order to discharge the DC link capacito rs, start once more the inverter on each un it through the screen : MENU/COMMAND MENU/ INVERTER ON COMMAND MENU INVERTER O N * INVERTER OFF Remark : command INVERTER ON will be enabled only ...

  • GE DIGITAL ENERGY LP 33 - page 47

    Modifications reserv ed Page 47/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 7.2.3 Start-up following the operat ion on maintenance bypass (Q2) This procedure presupposes that the load is powered by the manual bypass switch: • The inverter is switched OFF; • The manual bypas s switch Q2 is switched ON (Pos ...

  • GE DIGITAL ENERGY LP 33 - page 48

    Modifications reserv ed Page 48/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 7.2.4 Shutdown of a single unit in a parallel system With purpose to separate one unit from the parallel system. 1. Switch OFF the inverter o nly on this unit enteri ng the screen: MENU/COMMAND MENU /INVERTER OFF Attention : to switch ...

  • GE DIGITAL ENERGY LP 33 - page 49

    Modifications reserv ed Page 49/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 7.2.5 Start-up an additional unit in a parallel system Before connecting hazar dous voltages, make sure that: • The conne ction to the electrical system ha s been performed by qualified personnel; • The equipm ent frame has been co ...

  • GE DIGITAL ENERGY LP 33 - page 50

    Modifications reserv ed Page 50/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 7.2.6 Complete shutdown of a parallel system As a result of this procedu re the parallel system is completely switched OFF and not powered. NOTE ! This procedure involves all equipment powere d by parallel system, to be shut down. 1. P ...

  • GE DIGITAL ENERGY LP 33 - page 51

    Modifications reserv ed Page 51/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 7.2.7 Restore t o normal operation after “total off” NOTE ! Make sure the all units of the parallel syst e m t o b e s t a t u s o f t h e a c t i v a t i o n o f “ total off” , i. e. Q1 closed, Q2 open the battery breakers are ...

  • GE DIGITAL ENERGY LP 33 - page 52

    Modifications reserv ed Page 52/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 7.2.8 Restore to normal operation after “EPO – Emergency Power Off” NOTE ! Make sure the all units of the parallel syst em to be status of the activation of EPO , i. e. Q1 closed, Q2 open and the battery b reakers are i n ON stat ...

  • GE DIGITAL ENERGY LP 33 - page 53

    Modifications reserv ed Page 53/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 8 OPTIONS 8.1 OPTIONS GENERAL VIEW LPS33U_030-040_RPA system_GE_01 LP 33 Series 1 RPA Board LP 33 Series 2 RPA Board LP 33 Series 3 RPA Board LP 33 Serie s 4 RPA Board F2 F1 F3 F4 UTILITY INPU T LOA D RPA kit Redundant Parallel Arch it ...

  • GE DIGITAL ENERGY LP 33 - page 54

    Modifications reserv ed Page 54/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 9 MAINTENANCE WARNING ! All maintenance and service works m ust be performed by QUALIFIED SERVICE PERSO N. 9.1 GENERAL MAINTENANCE When used properly, the LP 33 Series UPS is virtually maintenance free. Take care of proper environmenta ...

  • GE DIGITAL ENERGY LP 33 - page 55

    Modifications reserv ed Page 55/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 9.4 SERVICE REQUIRED LP 33 60 kVA APPLICATION ON UPS = xx% SERVICE REQUIRED If this lamp lights up during the normal operation (service parameter with password), the perf ormances of the UPS remain the same, but that means the unit has ...

  • GE DIGITAL ENERGY LP 33 - page 56

    Modifications reserv ed Page 56/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA 10 NOTES 10.1 NOTES FORM It is recommended to note in this section Notes , with date and short description all the operations performed on the UPS, as: main tenance, components replacemen t, abnorma l situations, etc. . Date Descriptio ...

  • GE DIGITAL ENERGY LP 33 - page 57

    Modifications reserv ed Page 57/57 OPM_LPS_3UO_50K_60K_0US_V010.doc Operating Manu al LP 33 Series 50 & 60 kVA RIDER FOR WARRANTY FOR SALE OF SitePro TM , DIGITAL ENERGY TM SG Serie s and LP Series UPS. This Rider incor porates by re ference the Ter ms and Condition s in GE Industrial Systems (herein called GE) GETC2 003, and includes the follo ...

Fabbricante GE Categoria Power Supply

I documenti che otteniamo dal fabbricante del dispositivoGE DIGITAL ENERGY LP 33 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici GE
- manuali per l’uso DIGITAL ENERGY LP 33
- schede prodotto GE
- opuscoli
- o etichette energetiche GE DIGITAL ENERGY LP 33
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso GE DIGITAL ENERGY LP 33.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione GE DIGITAL ENERGY LP 33, manuali di manutenzione, brevi manuali o manuali utente GE DIGITAL ENERGY LP 33. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto GE DIGITAL ENERGY LP 33.

Manuali per l’uso simili

Manuale completo del dispositivo GE DIGITAL ENERGY LP 33, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare GE DIGITAL ENERGY LP 33 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti GE DIGITAL ENERGY LP 33.

Il manuale per l’uso completo GE, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale GE DIGITAL ENERGY LP 33 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice GE DIGITAL ENERGY LP 33, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per GE DIGITAL ENERGY LP 33 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo GE DIGITAL ENERGY LP 33 - che ci dovrebbe aiutare nei primi passi durante l'uso GE DIGITAL ENERGY LP 33
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del GE DIGITAL ENERGY LP 33
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio GE DIGITAL ENERGY LP 33 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su GE DIGITAL ENERGY LP 33?

Utilizza il modulo sottostante

Se non hai risolto il problema con GE DIGITAL ENERGY LP 33 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con GE DIGITAL ENERGY LP 33 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)