Italiano dropdown-ico

Manuale per l’uso Avaya S8500

104 pagine 0.76 mb
Scarica

Vai alla pagina of 104

Summary
  • Avaya S8500 - page 1

    Installing and Configuring the Avaya S8500 Media Server Release 4.0 03-300143 Release 4.0 February 2007 Issue 5 ...

  • Avaya S8500 - page 2

    © 2007 A vaya Inc. All Right s Reserved. Notice While reasonable ef forts were made to ensure that the information in this document was complete and accurate at the time of printi ng, Avaya Inc. ca n assume no liability for any errors. Chan ges and corrections to the information in this document may be incorporated in futur e releases. For full le ...

  • Avaya S8500 - page 3

    Installing and Configuring th e Avaya S8500 Media Server February 2007 3 Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 How to use A vaya inst allation document s . . . . . . . . . . . . . . . . . . . . . 8 Pre-inst allation r ...

  • Avaya S8500 - page 4

    Contents 4 Installing and Configuring the Avaya S8500 Me dia Server February 2007 Configuring T elnet for Windows 2000 and Windows XP . . . . . . . . . . . . . . 36 Inst alling Ava ya Communication Manager . . . . . . . . . . . . . . . . . . . . . 37 Chapter 4: Media server configuration . . . . . . . . . . . . . . . . . . . 39 Opening the Maintena ...

  • Avaya S8500 - page 5

    Contents Installing and Configuring th e Avaya S8500 Media Server February 2007 5 Enabling control of the IPSIs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 V e rifying the license status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Chapter 7: Inst all an S8500 Medi a Server as an LSP . . . . . . . . . . . 63 Confi ...

  • Avaya S8500 - page 6

    Contents 6 Installing and Configuring the Avaya S8500 Me dia Server February 2007 Appendix A: Media server access . . . . . . . . . . . . . . . . . . . . . 87 Accessing the command line interface of the se rver with SSH . . . . . . . . . . 87 Connecting to the media server directly . . . . . . . . . . . . . . . . . . . . . . 89 Connecting to the me ...

  • Avaya S8500 - page 7

    Installing and Configuring th e Avaya S8500 Media Server February 2007 7 Chapter 1: Introduction Use these procedures to inst all Avaya Co mmuni cation Manager and co nfigure a new A vaya S8500 Media Server and the a ssociated component s in an IP-connected port network (IP-PNC) configuration. T o configure the media server , use the Av aya Install ...

  • Avaya S8500 - page 8

    Chapter 1: Introduction 8 Installing and Configuring the Avaya S8500 Me dia Server February 2007 How to use A vaya inst allation document s Use this document as a guide to inst all and configure Avaya media servers. For in formation about a particular t ask, use the index or the t able of content s to locate the page on which the information is des ...

  • Avaya S8500 - page 9

    Pre-installation requirements Installing and Configuring th e Avaya S8500 Media Server February 2007 9 - Installation and Upgrades for the A v aya G700 Media Gateway and Avaya S83 00 Media Server (555-234 -100) - Avaya IA 770 INTUITY AUDIX Messaging Application Administering the S8300 and S8400 Media Servers to work with IA 770 ● Return to this d ...

  • Avaya S8500 - page 10

    Chapter 1: Introduction 10 Installing and Configuring the Avay a S85 00 Media Server February 2007 Ensuring that the preinst allation t asks are complete The preinstallatio n team completes the following t asks. If these tasks are not complete, d o not continue with the inst allation. ● V e rify that the required number of open, customer-supplied ...

  • Avaya S8500 - page 11

    S8500 hardware Installing and Configuring th e Avaya S8500 Media Server February 2007 11 Figure 1: S8500C front panel Figure 2: S8500C back panel Figure notes: 1. Power-on LED 2. Power button 3. Reset button 4. Hard disk drive activity LED 5. Locator LED 6. System error LE D 7. USB port 8. USB port 9. Hard disk drive 10. CD eject button 11 . CD-ROM ...

  • Avaya S8500 - page 12

    Chapter 1: Introduction 12 Installing and Configuring the Avay a S85 00 Media Server February 2007 Figure 3: S8500B front panel Figure 4: S8500B back panel Figure notes: 1. CD-ROM drive activity LED 2. CD-ROM eject button 3. Diskette drive activity LED 4. Diskette eject button 5. System error LE D 6. System locator LED . 7. Hard disk drive activity ...

  • Avaya S8500 - page 13

    Equipment specifications Installing and Configuring th e Avaya S8500 Media Server February 2007 13 Equipment specifications The S8500 Media Server control network comp onents consist of the med ia server , one UPS, and an Av aya-provided Ethernet switch (optional ). The physical specifications for the control network component s are shown in T able ...

  • Avaya S8500 - page 14

    Chapter 1: Introduction 14 Installing and Configuring the Avay a S85 00 Media Server February 2007 T able 2 outlines the features and specifications of the Avaya S85 00 Media Server . The differences betwee n the S8500B and S8500C versions are noted. T able 2: S8500 Media Server specifications Feature S8500B S8500C Micro- processors CPU: 3.0 GHz Pe ...

  • Avaya S8500 - page 15

    Equipment specifications Installing and Configuring th e Avaya S8500 Media Server February 2007 15 Environmental specifications for t he S8500 Media Servers are shown in T able 3 . T able 3: S8500 Media Server environment al specifications Parameter S8500B S pecifications S8500C Specification s Acoustical Noise Emissions Sound power , idling: 65 de ...

  • Avaya S8500 - page 16

    Chapter 1: Introduction 16 Installing and Configuring the Avay a S85 00 Media Server February 2007 About the Server A vailability Management Processor The Server A vailability Managem ent Processor (SAMP) remo te maintenance circuit card is preinstalled in the S8500 Media Server . The SAMP monitors and reports alert s from the S8500 components to p ...

  • Avaya S8500 - page 17

    About the Server Availabili ty Management Processor Installing and Configuring th e Avaya S8500 Media Server February 2007 17 ● SAMP Ethernet 1 is not used. ● SAMP Ethernet 2 is for local access. This port is for on-site services personnel to access the SAMP with the craf t login. ● The USB interface is used to connect a US B modem for remote ...

  • Avaya S8500 - page 18

    Chapter 1: Introduction 18 Installing and Configuring the Avay a S85 00 Media Server February 2007 Figure 6: SAMP connections for S8500C About SAMP sof tware The SAMP is shipped from the factory with the sof tware installed and with some default settings. However , you might need to install an updated version of the sof tware, and you must configur ...

  • Avaya S8500 - page 19

    About media server port co nnections Installing and Configuring th e Avaya S8500 Media Server February 2007 19 About media server port connections The following section explains how to conn ect the Ethernet port s on the back of the media server . S8500 port connections Use stand ard CA T5 cables with RJ45 connectors on each end to conne ct to the ...

  • Avaya S8500 - page 20

    Chapter 1: Introduction 20 Installing and Configuring the Avay a S85 00 Media Server February 2007 Figure 8: S8500C Media Server connec tivity guide Note: Note: If the S8500C is configured as an ES S, the port assignment s are different: ● Eth0: Control Ne twork A ● Eth3: Control Ne twork B ● Eth4: LAN, if two dedicated control net works are ...

  • Avaya S8500 - page 21

    About modem connections Installing and Configuring th e Avaya S8500 Media Server February 2007 21 About modem connections Note: Note: Y ou cannot connect USB modems to rotary lines. A touch tone line is required. On an A vaya S8500 Media Server , connect the modem to the USB port on the SAMP . Avaya defaults on the SAMP set the requir ed options on ...

  • Avaya S8500 - page 22

    Chapter 1: Introduction 22 Installing and Configuring the Avay a S85 00 Media Server February 2007 Modem options Y ou set the modem options when you configur e the media server . Y ou do not set options on the modems themselves. About media gateways In a new inst allation, the A vaya S8500 Media Server works with only the A vaya G650 Media Gateway ...

  • Avaya S8500 - page 23

    About Processo r Et hernet Installing and Configuring th e Avaya S8500 Media Server February 2007 23 . T able 4 lists the possible u ses of the PE in terface for an S8500 primary controller . T able 4: Use of the PE interface for a simple x S8500 primary controller Possible functions of the PE interface St atus of the function on the S8500 Media Se ...

  • Avaya S8500 - page 24

    Chapter 1: Introduction 24 Installing and Configuring the Avay a S85 00 Media Server February 2007 About S8500 LSP mode S tarting with Rele ase 3.1 of Communication Manager , you can configure the S8500 as a local survivable processor (LSP), and, the S8500 can be the primary controller for an IP network with port networks. This new functionalit y i ...

  • Avaya S8500 - page 25

    S8500 LSP license file Installing and Configuring th e Avaya S8500 Media Server February 2007 25 The PE interface on an S8500 LSP support s three adjuncts: ● Call Management System (CMS) ● Application Enablement Services (AESVCS) ● Call Detail Recording (CDR) The S8500 as a primary controller can conne ct to gateways and endpoint s that use b ...

  • Avaya S8500 - page 26

    Chapter 1: Introduction 26 Installing and Configuring the Avay a S85 00 Media Server February 2007 Y ou can use SSH to access the following devices: ● The S8300, S8400, S8500, an d S8700-series Media Servers on Release 3.1 or later of Communication Manager Note: Note: With Release 4.0 or later of Co mmunicati on Manager , T elnet is disabled, so ...

  • Avaya S8500 - page 27

    Configuring the SNMP modules in the UPS Installing and Configuring th e Avaya S8500 Media Server February 2007 27 Chapter 2: SNMP Configuration After you inst all and connect the control network equipment, you must configure the SNMP modules in each Avaya-supplied UPS to send al arms or trap s to the media servers. This process requires that you al ...

  • Avaya S8500 - page 28

    Chapter 2: SNMP Configuration 28 Installing and Configuring the Avay a S85 00 Media Server February 2007 Default IP addresses for the UPS The following tab le shows the default IP addresses for the UPS. For how to administer the SNMP modu le in the UPS, see Administering the SNMP module on page 29. Prerequisites for configuring the SNMP module Befo ...

  • Avaya S8500 - page 29

    Configuring the SNMP modules in the UPS Installing and Configuring th e Avaya S8500 Media Server February 2007 29 ! SECURITY ALERT : ! SECURITY ALERT : The Get and Set community name strings are initially con figured with the default values of Public and Private, respec tively . These community name strings function as passwo rds for their respecti ...

  • Avaya S8500 - page 30

    Chapter 2: SNMP Configuration 30 Installing and Configuring the Avay a S85 00 Media Server February 2007 Setting selected trap s (alarming) The default is to set all t rap s, which can result in large log entries. T o avoid this problem, A vaya recommends that you set only the fo llowing traps: ● UPS on Battery—Indicates an AC power failure. Ba ...

  • Avaya S8500 - page 31

    Configuring the SNMP subage nt in the Avaya Ethernet switch (if used) Installing and Configuring th e Avaya S8500 Media Server February 2007 31 Note: Note: For the Ethernet switch to report alarms properly , you must also configure the IP addresses for the Ethernet switches in the media servers. Default IP addresses for the Ethernet switch The foll ...

  • Avaya S8500 - page 32

    Chapter 2: SNMP Configuration 32 Installing and Configuring the Avay a S85 00 Media Server February 2007 ! SECURITY ALERT : ! SECURITY ALERT : The Get and Set community name strings are initially con figured with the default values of Public and Private, respec tively . These community name strings function as passwo rds for their respecti ve SNMP ...

  • Avaya S8500 - page 33

    Configuring the SNMP subage nt in the Avaya Ethernet switch (if used) Installing and Configuring th e Avaya S8500 Media Server February 2007 33 10. If the port networks are IP-PNC, en sure that all appropriate port s on the Ethernet switch are locked to 100 speed and full duplex. 1 1. When you finish , disconnect your computer from the Ethernet swi ...

  • Avaya S8500 - page 34

    Chapter 2: SNMP Configuration 34 Installing and Configuring the Avay a S85 00 Media Server February 2007 ...

  • Avaya S8500 - page 35

    Clearing the ARP c ache on the laptop Installing and Configuring th e Avaya S8500 Media Server February 2007 35 Chapter 3: Communication Manager inst allation A new media server comes with a bla nk hard disk drive. Use the boo table sof tware distribution CD-ROM to install the Linux operat ing system and Av aya Communication Manager . This chapter ...

  • Avaya S8500 - page 36

    Chapter 3: Communication Manager installa tion 36 Installing and Configuring the Avay a S85 00 Media Server February 2007 Applying power to the media server Note: Note: In this procedure, the sof tware CD-ROM must be placed into the CD-ROM drive on the media server immediately a fter you turn on the power to the media server . 1. Connect the AC pow ...

  • Avaya S8500 - page 37

    Installing Avaya Communication Manage r Installing and Configuring th e Avaya S8500 Media Server February 2007 37 Inst alling A vaya Communication Manager Use a T elnet session to access the information on the CD-ROM. 1. On your Services laptop computer , click Start > Run to open the Run dialog box. 2. T ype telnet 192.11.13.6 and press Enter t ...

  • Avaya S8500 - page 38

    Chapter 3: Communication Manager installa tion 38 Installing and Configuring the Avay a S85 00 Media Server February 2007 ● If you are installing an S8500 Media Se rver to run the Expan ded Meet-me Conferencing (EMMC) application, you are finished with this document. Continue the EMMC installation p rocedures described in Inst alling and T rouble ...

  • Avaya S8500 - page 39

    Installing and Configuring th e Avaya S8500 Media Server February 2007 39 Chapter 4: Media server configuration After you inst all the Communication Manager so ftware, you must use the A vaya Installation Wizard to configure the media se rver . This section covers the following t asks: ● Copying files to the media server on page 40 ● Creating a ...

  • Avaya S8500 - page 40

    Chapter 4: Media server conf iguration 40 Installing and Configuring the Avay a S85 00 Media Server February 2007 Opening the Maintenance W eb Interface Y ou can use the Maintenance Web Interface to copy license files and authentication files, service packs, a nd SAMP upda te files from the Serv ices laptop to the media server . For how to open the ...

  • Avaya S8500 - page 41

    About the Avaya In stallation Wizard Installing and Configuring th e Avaya S8500 Media Server February 2007 41 6. Put a check in the allow Linux shell access field. 7. Skip the lock this account and date on which account is disabled fields. 8. For the select type of authentication option, select pass word . 9. Complete the following fields: ● ent ...

  • Avaya S8500 - page 42

    Chapter 4: Media server conf iguration 42 Installing and Configuring the Avay a S85 00 Media Server February 2007 Running the A vaya Inst allation Wizard 1. With the W eb browse r open, type 192. 11.13.6 and press Enter in the browser address window to display the login p age. 2. Log in as craft and use the initial craf t pa ssword. 3. Click Launch ...

  • Avaya S8500 - page 43

    Verifying the media server con nection to the customer LAN (if provided) Installing and Configuring th e Avaya S8500 Media Server February 2007 43 3. Enter the information to copy th e firmware file to the media server . 4. Use SSH to access the media server a nd log in. 5. T o start the update process, type sampupdate and press Enter . The update ...

  • Avaya S8500 - page 44

    Chapter 4: Media server conf iguration 44 Installing and Configuring the Avay a S85 00 Media Server February 2007 3. Select Configure individual servi ces and click Continue . 4. On the menu on the lef t, click Set Modem Interface . 5. Select Change Modem Setting and click Continue . 6. In the Extra Modem Initialization Commands window , type the i ...

  • Avaya S8500 - page 45

    Enabling network t ime servers Installing and Configuring th e Avaya S8500 Media Server February 2007 45 With NTP , you can specify one, two, or three netwo rk time servers to provide the accurate time of day dat a to the clocks on the media servers. The ne twork time servers, in turn, get their source timing from one of several highly accura te ti ...

  • Avaya S8500 - page 46

    Chapter 4: Media server conf iguration 46 Installing and Configuring the Avay a S85 00 Media Server February 2007 Checking LED activity on the dual NIC When the S8500 Media Server is in service, check the LEDs on each port of the du al network interface card (NIC) for connection and activity . En sure that the LED on the lef t that indicates connec ...

  • Avaya S8500 - page 47

    Configuring the NIC Installing and Configuring th e Avaya S8500 Media Server February 2007 47 2. Click Continue until you g et to the "S pecify how you want to u se this Wizard" p age. 3. Select Configure Individual Services and click Continue . 4. On the menu on the lef t, click Set Identities 5. Use the drop-down menus to assign the Eth ...

  • Avaya S8500 - page 48

    Chapter 4: Media server conf iguration 48 Installing and Configuring the Avay a S85 00 Media Server February 2007 6. Click Continue . 7. Complete the following informa tion for Ethernet 2: ● IP address ● Gateway ● Subnet mask ● S peed 8. V erify with the network administrator that the LAN hardware support s 802.1q priority tagging. If supp ...

  • Avaya S8500 - page 49

    Installing and Configuring th e Avaya S8500 Media Server February 2007 49 Chapter 5: IP interface translations T o administer IPSI circuit packs, use a term inal emulation program to issue Communication Manager SA T commands. For Communication Manager te rminal emulation, use a progra m such as Avaya Native Configuration Manager , Avaya T ermi nal ...

  • Avaya S8500 - page 50

    Chapter 5: IP interface translations 50 Installing and Configuring the Avay a S85 00 Media Server February 2007 Adding media gateways Note: Note: If system translations have been loaded on the media server , media gateways do not need to be added to administer t he IPSI. 1. T ype add cabinet n and press Ent er , where n is the cabinet number , for ...

  • Avaya S8500 - page 51

    Enabling the IPSI Installing and Configuring th e Avaya S8500 Media Server February 2007 51 Enabling the IPSI 1. T ype change system-parameters ipserver-interface and press Enter . 2. On the IP Server Interface System Pa rameters screen, verify that the primary control subnetwork address is correct. The control subnetwor k addresses typically matc ...

  • Avaya S8500 - page 52

    Chapter 5: IP interface translations 52 Installing and Configuring the Avay a S85 00 Media Server February 2007 Adding the IPSI to the system Use the IP Server Interface Administration - Port Network SA T screen to add an I PSI. The information on this screen differs, depe nding on w hethe r the IP addresse s of the IPSI are st atic or assigned aut ...

  • Avaya S8500 - page 53

    Installing and Configuring th e Avaya S8500 Media Server February 2007 53 Chapter 6: IP interface configuration This chapter covers the following tasks: ● Connecting to the IPSIs on page 53 ● IPSI address configuration on page 54 ● Programming the IPSI for DHCP addressing on page 59 ● Programming the IPSI for static addressing on page 54 ? ...

  • Avaya S8500 - page 54

    Chapter 6: IP interface configuration 54 Installing and Configuring the Avay a S85 00 Media Server February 2007 IPSI address configuration The IPSI circuit pack rece ives an IP address: ● S tatically with st atic IP addressing, if the control network is nondedicated (public) through the customer network. ● Dynamically with dy namic host config ...

  • Avaya S8500 - page 55

    IPSI address conf iguration Installing and Configuring th e Avaya S8500 Media Server February 2007 55 Y ou administer the static IP address for the circuit p ack directly through the Ethernet p ort connection on the faceplate (top port). See F igure 1 1 . Figure 1 1: Connecting the laptop dire ctly to the IPSI Note: Note: Ensure that you have the p ...

  • Avaya S8500 - page 56

    Chapter 6: IP interface configuration 56 Installing and Configuring the Avay a S85 00 Media Server February 2007 4. T o log into the IPSI, use SSH and the IP address 192.11.13.6 . For information on how to use SSH, see Accessing th e command line interface of the server with SSH on page 87. Note: Note: While connected to the IPSI, type help or ? to ...

  • Avaya S8500 - page 57

    Setting the VLAN and diffserv paramet ers Installing and Configuring th e Avaya S8500 Media Server February 2007 57 12. If a default gateway is used, e nter the gateway IP address with set control gateway gatewayad dr , where gatewayaddr is the cust omer-provided IP address for their gateway . 13. T ype quit and press Enter to save the changes and ...

  • Avaya S8500 - page 58

    Chapter 6: IP interface configuration 58 Installing and Configuring the Avay a S85 00 Media Server February 2007 8. Check the LED on the IPSIfaceplate. V erify t hat the display shows the letters I and P and a filled-in V at the bottom. (See Figure 12 ). Figure 12: IPSI LED display for st atic address Note: Note: Clear the ARP cache on the laptop b ...

  • Avaya S8500 - page 59

    Setting the VLAN and diffserv paramet ers Installing and Configuring th e Avaya S8500 Media Server February 2007 59 Programming the IPSI for DHCP addressing ! Import ant: Important: If an IPSI is in a port network that is backed up with the Enterprise Survivable Server (ESS) option you mu st use static addressing for the ESS to provide service to t ...

  • Avaya S8500 - page 60

    Chapter 6: IP interface configuration 60 Installing and Configuring the Avay a S85 00 Media Server February 2007 Note: Note: If you pass th e letter or number that you want, you have two options. Y ou can cycle through all the letters or numb ers to get to the one you want. Or , you can reinsert, or reseat, the circuit p ack and start aga in. Note: ...

  • Avaya S8500 - page 61

    Verifying connectivity to the media se rver Installing and Configuring th e Avaya S8500 Media Server February 2007 61 6. All segment s of the display go dark for one second. Then, the Switch ID and media gateway stack numb er shows in the top three characters of th e LED display . A "V" is shown in the fourth or bottom cha racter . When t ...

  • Avaya S8500 - page 62

    Chapter 6: IP interface configuration 62 Installing and Configuring the Avay a S85 00 Media Server February 2007 V e rifying that the IPSIs are translated 1. Use SSH to open a SA T session on the media server . 2. T ype list ipserver-interface and press Enter . 3. V erify that all ISPI circuit packs are translated. Upgrading the IPSI firmware versi ...

  • Avaya S8500 - page 63

    Installing and Configuring th e Avaya S8500 Media Server February 2007 63 Chapter 7: Inst all an S8500 Media Server as an LSP Note: Note: If you are installing the S8500 Media Server as a primary controlle r , skip this section. S tarting with Rele ase 3.1 of Communication Man ager , the Processor Ethernet (PE) interface is supported on the S8500 M ...

  • Avaya S8500 - page 64

    Chapter 7: Install an S8500 Media Server as an LSP 64 Installing and Configuring the Avay a S85 00 Media Server February 2007 1. Open the Maintenance Web Interface an d click Configure Server . 2. Click Continue until you get to the page "How do you want to use the Wizard." 3. Select the Configure Individual Services . 4. Select Set Date ...

  • Avaya S8500 - page 65

    Administerin g the prim ary controller Installing and Configuring th e Avaya S8500 Media Server February 2007 65 Administering the primary controller Y ou must administer the primary controller so t hat the cont roller can identify and communicate with the S8500 LSP . 1. At the SA T command line, type change node-names ip name and press Enter , whe ...

  • Avaya S8500 - page 66

    Chapter 7: Install an S8500 Media Server as an LSP 66 Installing and Configuring the Avay a S85 00 Media Server February 2007 Note: Note: The gateway that pr ovides the serial numbe r must be connected to the LSP such that it remains connected in the event of a network failure. Inst alling and verifying th e license on the new LSP On the S8500 LSP ...

  • Avaya S8500 - page 67

    Opening the TCP ports on the S8500 LSP Installing and Configuring th e Avaya S8500 Media Server February 2007 67 Opening the TCP port s on the S8500 LSP Y ou can open various TCP ports for Processor Ethernet (PE) on the firewall to e nable the connections to work for the LSP . 1. In the Maintenance W eb Interface, under Security , click Firewall . ...

  • Avaya S8500 - page 68

    Chapter 7: Install an S8500 Media Server as an LSP 68 Installing and Configuring the Avay a S85 00 Media Server February 2007 V e rifying that the primary controller identifies the new LSP 1. W ait several minutes af ter you reset the S8500 LSP . On the primary controller , run the SA T command list survivable-processor to verify that the LSP serve ...

  • Avaya S8500 - page 69

    Installing and Configuring th e Avaya S8500 Media Server February 2007 69 Chapter 8: Postinst allation administration This section covers the following t asks: ● V erifying translations on page 69 ● Setting rules for daylight savings time on page 70 ● Setting locations (if necessary) on page 71 ● V e rifying the date and the time on page 72 ...

  • Avaya S8500 - page 70

    Chapter 8 : Postins tallation ad ministrati on 70 Installing and Configuring the Avay a S85 00 Media Server February 2007 Setting rules for daylight savings time Y ou set the date, the time, and the time zone through the Maintenance W eb Interface on the media server . Y ou must use SA T commands to set the rules for daylight savings time. Note: No ...

  • Avaya S8500 - page 71

    Setting locat ions (if necessary) Installing and Configuring th e Avaya S8500 Media Server February 2007 71 Setting locations (if necessary) After you set the rules for daylight savings time, you must set the loca tions for all port networks. Port networks can be in dif ferent time zones. Use SA T commands to set the locations for the port networks ...

  • Avaya S8500 - page 72

    Chapter 8 : Postins tallation ad ministrati on 72 Installing and Configuring the Avay a S85 00 Media Server February 2007 V e rifying the date and the time Use SA T commands to verify the date and time. 1.T ype display time and press Enter . 2. V erify that the date and the time are correct. 3. In the Daylight Savings Ru le field, verify that the c ...

  • Avaya S8500 - page 73

    Enabling and disabling the Etherne t switch ports Installing and Configuring th e Avaya S8500 Media Server February 2007 73 Enabling and disabling the Ethernet switch port s Y ou might want to disable unused ports on the Avaya Ethernet switch, if used. 1. T o select an Ethernet switch to administer , under Security , click Ethernet Switch Port s . ...

  • Avaya S8500 - page 74

    Chapter 8 : Postins tallation ad ministrati on 74 Installing and Configuring the Avay a S85 00 Media Server February 2007 2. Select the switch you want to administer and click Submit . 3. Locate the port s that you want to disable and select Disable in that row . 4. Click Submit Changes . ...

  • Avaya S8500 - page 75

    Backing up files to the compact fla sh media Installing and Configuring th e Avaya S8500 Media Server February 2007 75 Backing up files to the comp act flash media Note: Note: Avaya requires the use of industrial grade compact flash media. For more informati on, see Hardware Description and Reference for A vaya Communication Manager (555-245-207). ...

  • Avaya S8500 - page 76

    Chapter 8 : Postins tallation ad ministrati on 76 Installing and Configuring the Avay a S85 00 Media Server February 2007 Enabling alarms to INADS by way of the SNMP module Note: Note: Perform this procedure only if the inst allation includes a Secure Service Ga teway (SSG). T o enable alarms on the media servers: 1. S tart an SSH session on the me ...

  • Avaya S8500 - page 77

    Installing and Configuring th e Avaya S8500 Media Server February 2007 77 Chapter 9: Inst allation verification This chapter provides the following information about how to verify the media server inst allation and configuration : ● T esting the IPSI circuit packs ● T esting the license file ● Checking LED status in dicators - Media servers - ...

  • Avaya S8500 - page 78

    Chapter 9 : Installa tion verifi cation 78 Installing and Configuring the Avay a S85 00 Media Server February 2007 S8500 LEDs The Avaya S8500 Media Servers have five or six LE Ds on the front and four LEDs on the back. The S8500B and S8 500C have the same LEDs but in differe nt locations. The S8500B can have an additional LED indicating activity on ...

  • Avaya S8500 - page 79

    S8500 LEDs Installing and Configuring th e Avaya S8500 Media Server February 2007 79 Figure 14: S8500B front p anel The functions of the front-p anel LEDs are as follows: Figure 15: Rear view of S8500B Media Server on page 80 sh ows the Et hernet port L EDs on the back panel of th e S8500B. Each p ort connec tor has two LEDs, one f or transmission ...

  • Avaya S8500 - page 80

    Chapter 9 : Installa tion verifi cation 80 Installing and Configuring the Avay a S85 00 Media Server February 2007 Figure 15: Rear view of S8500B Media Server Note: Note: On the S8500C, the Ethernet ports are located below th e dual NIC but the port LEDs have the same location and fu nction as shown in Figure 15 . See Figure 2: S8500C back panel on ...

  • Avaya S8500 - page 81

    Avaya C360 Ether net switch LEDs Installing and Configuring th e Avaya S8500 Media Server February 2007 81 A vaya C360 Ethernet switch LEDs The C360 series converged, st ackable, Ethernet switches include: ● C363T : 24-port ● C363T -PWR: 24-port power over Ethernet (PoE) ● C364T : 48-port ● C364T -PWR: 48-port PoE The front pan el of the C3 ...

  • Avaya S8500 - page 82

    Chapter 9 : Installa tion verifi cation 82 Installing and Configuring the Avay a S85 00 Media Server February 2007 UPS LEDs The UPS LEDs flash briefly after the UPS is plugged in. The normal mode LED flashes af ter a self-test to indicate that the UPS is in standby mode. For more information, see the UPS user guide fo r the Powerware UPS. Figure 16 ...

  • Avaya S8500 - page 83

    TN2312BP IPSI LEDs Installing and Configuring th e Avaya S8500 Media Server February 2007 83 TN2312BP IPSI LEDs TN2312BP IP Server Interface (IPSI) circuit p ack LEDs include: ● S tandard LEDs and connector slots ( Figure 17: TN2312BP IPSI circuit pack faceplate on page 84) ● A programmable LED display , which indicates: - The type of IPSI IP a ...

  • Avaya S8500 - page 84

    Chapter 9 : Installa tion verifi cation 84 Installing and Configuring the Avay a S85 00 Media Server February 2007 Figure 17: TN2312BP IPSI circuit p ack faceplate Figure notes: 1. Red LED 2. Green LED 3. Amber LED 4. Y ellow LED (tone clock st atus) 5. Emergency transfer LED 6. Services RJ45 connector 7. Network control RJ45 connector 8. Four-cha ...

  • Avaya S8500 - page 85

    TN2312BP IPSI LEDs Installing and Configuring th e Avaya S8500 Media Server February 2007 85 Figure 18: IPSI LED display for a st atic IP address Figure notes: 1. The IPSI has a static IP address. 2. The IPSI has connectivity and an IP address. ledlip1 KLC 030502 1 2 CLK S E R V I C E N E T W O R K ...

  • Avaya S8500 - page 86

    Chapter 9 : Installa tion verifi cation 86 Installing and Configuring the Avay a S85 00 Media Server February 2007 Figure 19: IPSI LED display indicating connectivity st atus for a DHCP IP address Connectivity st atus 1 2 3 4 5 The IPSI is connected to a media server . No Y es Y es Y es Y es The IPSI has an IP address. No No Ye s Ye s No The Servic ...

  • Avaya S8500 - page 87

    Installing and Configuring th e Avaya S8500 Media Server February 2007 87 Appendix A: Media server access Use a personal computer or a Services laptop computer that is equ ipped with a network interface card (NIC), a terminal emulation program, and a Web browser to access a media server for initial configu ration, afterma rket additions, and contin ...

  • Avaya S8500 - page 88

    Appendix A: Media server access 88 Installing and Configuring the Avay a S85 00 Media Server February 2007 Note: Note: Many A vaya products support access with SSH. However , Avaya does not provide support for third- party client s that are used for SSH access. Problems with an SSH client, including PuTTY , are the responsibility of the user or the ...

  • Avaya S8500 - page 89

    Connecting to the media se rver directly Installing and Configuring th e Avaya S8500 Media Server February 2007 89 Connecting to the media server directly T o access the media server directly , use a com puter with the following minimum specifications: ● A Windows 2000 or Windows XP operating system ● 32-MB of RAM ● 40-MB of available disk sp ...

  • Avaya S8500 - page 90

    Appendix A: Media server access 90 Installing and Configuring the Avay a S85 00 Media Server February 2007 Figure 20: Services laptop computer connected directly to the S8500 Media Server Note: Note: The layout of the hardware compo nents on the back p anel of the S8500C is different from the layo ut on the S8500B. Ho wever , the laptop computer co ...

  • Avaya S8500 - page 91

    Connecting to the media serve r remotely over the network Installing and Configuring th e Avaya S8500 Media Server February 2007 91 Connecting to the media server remotely over the network Y ou can use any computer to connect to the medi a serve r through a LAN. The se curity settings on the LAN must allow remote access. 1. Open a W eb browser or a ...

  • Avaya S8500 - page 92

    Appendix A: Media server access 92 Installing and Configuring the Avay a S85 00 Media Server February 2007 5. When prompted, enter your remote access login name and p assword. 6. When the system displays the S tart PPP now message, click Done . When you see the Connection Complete dialog box, your comp uter is co nnected to the media server . 7. Op ...

  • Avaya S8500 - page 93

    Using the SAT command line prompt Installing and Configuring th e Avaya S8500 Media Server February 2007 93 Using the SA T command line prompt Use a remote Secure Shell (SSH) or terminal emulation session to access the Communication Manager SA T command line prompt. Logins for A vaya technicians and BusinessPartners Avaya field technicians and Busi ...

  • Avaya S8500 - page 94

    Appendix A: Media server access 94 Installing and Configuring the Avay a S85 00 Media Server February 2007 Customers can set up their own logins to ac cess Avaya media servers. Y ou must have superuser permission to create or change logins and p asswords. NOTE: do not start login IDs with a number . For more information, see the Avaya Communic atio ...

  • Avaya S8500 - page 95

    Setting the brows er options for Internet Ex plorer 6.0 Installing and Configuring th e Avaya S8500 Media Server February 2007 95 Setting the browser options for Internet Explorer 6.0 A connection session to a media server might ti me out when connected through a proxy server . T o avoid having the media server time out du ri ng a session, add the ...

  • Avaya S8500 - page 96

    Appendix A: Media server access 96 Installing and Configuring the Avay a S85 00 Media Server February 2007 ...

  • Avaya S8500 - page 97

    Installing and Configuring th e Avaya S8500 Media Server February 2007 97 Appendix B: Inst allation troubleshooting This section provides some simple strategies to help you troubleshoot a n installation of a media server . This section includes: ● T roubleshooting the installation of the media server ha rdware on page 97 ● T roubleshooting the ...

  • Avaya S8500 - page 98

    Appendix B: Installation trouble shooting 98 Installing and Configuring the Avay a S85 00 Media Server February 2007 T roubleshooting the configurat ion of the media server hardware T roubleshooting the configuration o f the media server hardware Problem Possible solution Cannot log in to the UPS subagent ● Ensure that the SNMP subagent is instal ...

  • Avaya S8500 - page 99

    Troubleshooting the co nfiguration of the media serve r hardware Installing and Configuring th e Avaya S8500 Media Server February 2007 99 Cannot ping out to the customer network ● Ensure that in the LAN security settings “output from server” for icmp is enabled. Cannot ping the media server from the customer network ● Ensure that in the LA ...

  • Avaya S8500 - page 100

    Appendix B: Installation trouble shooting 100 Installing and Configuring the Avaya S8500 Med ia Server February 2007 T roubleshooting the inst allation of the license file and the A vaya authentication file Problem Possible solution Cannot get files from the RF A site ● Provide the correct SAP number . ● Provide the serial number for the refere ...

  • Avaya S8500 - page 101

    Installing and Configuring th e Avaya S8500 Media Server F ebruary 2007 101 Index Index A access media server directly . . . . . . . . . . . . . . . . . . . . . 89 remotely over modem . . . . . . . . . . . . . . 91 remotely over network . . . . . . . . . . . . . 91 accessing Maintenance Web Interface . . . . . . . 92 accessing the media server . . ...

  • Avaya S8500 - page 102

    102 Installing and Configuring the Avaya S8500 Med ia Server February 2007 Index IP address set static . . . . . . . . . . . . . . . . . . . . 54 use DHCP . . . . . . . . . . . . . . . . . . . 59 IP address, set static . . . . . . . . . . . . . . . . 54 IP interface enabling control . . . . . . . . . . . . . . . . 62 upgrading firmware version . . ...

  • Avaya S8500 - page 103

    Installing and Configuring th e Avaya S8500 Media Server F ebruary 2007 103 Index spanning tree enabling . . . . . . . . . . . . . . . . . . . . 32 setting version . . . . . . . . . . . . . . . . . 32 specifications S8500 . . . . . . . . . . . . . . . . . . . . . 14 S8500 control network components . . . . . . . 13 SSH about . . . . . . . . . . . . ...

  • Avaya S8500 - page 104

    104 Installing and Configuring the Avaya S8500 Med ia Server February 2007 Index ...

Fabbricante Avaya Categoria Home Theater Server

I documenti che otteniamo dal fabbricante del dispositivoAvaya S8500 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Avaya
- manuali per l’uso S8500
- schede prodotto Avaya
- opuscoli
- o etichette energetiche Avaya S8500
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Avaya S8500.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Avaya S8500, manuali di manutenzione, brevi manuali o manuali utente Avaya S8500. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Avaya S8500.

Manuali per l’uso simili

Manuale completo del dispositivo Avaya S8500, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Avaya S8500 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Avaya S8500.

Il manuale per l’uso completo Avaya, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Avaya S8500 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Avaya S8500, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Avaya S8500 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Avaya S8500 - che ci dovrebbe aiutare nei primi passi durante l'uso Avaya S8500
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Avaya S8500
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Avaya S8500 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Avaya S8500?

Utilizza il modulo sottostante

Se non hai risolto il problema con Avaya S8500 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Avaya S8500 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)