Manuale per l’uso SonicWALL TZ170

22 pagine 0.83 mb
Scarica

Vai alla pagina of 22

Summary
  • SonicWALL TZ170 - page 1

    SonicOS Hub and Spoke TZ170 VPNs with Checkpoint NG Introduction This technote will detail all steps to get a Hu b and Spoke setup between the SonicWALL SonicOS Enh anced and the Checkpoint NG. Within this setup the Checkpoint NG will be the HUB an d 2 TZ170 units will be the Spokes . Versions Used  SonicOS 2.5.0.2 Enhanced on both T Z170 units ...

  • SonicWALL TZ170 - page 2

    2 Before You Begin If you have not already done so, set up a mana gement system connecting to the SonicWALL’s intern al LAN interfac e. The SonicWALL should alread y be configured for internet acce ss; if not, do this before completing any further steps. T he Check Point FireWall-1 NG server is also as sumed to be properly configur ed for intern ...

  • SonicWALL TZ170 - page 3

    3 Next create an address object grou p for t he two checkpoint address object s. On the ‘Network > Address Objects’ page in the ‘Address Groups’ section, click on ‘A dd Group…’ to create the address grou p for the o bjects. Name: checkpoint_lan Name: Side_Bob_lan Zone Assignment: VPN Zone Assignment: VPN Type: Network Type: Network ...

  • SonicWALL TZ170 - page 4

    4 From the navigation bar on the left, cli ck on ‘VPN’, this will brin g up the ‘VPN > Settings’ pag e. In the ‘VPN Global Settings’ section, make sure the ‘Enable VP N’ radi o button is selected. In the ‘VPN Policies’ section, click on ‘Add’ to create the new VPN policy for the Check Poi nt FireWall-1. The ‘VPN Policy? ...

  • SonicWALL TZ170 - page 5

    5 Next select the ‘Network’ tab. In the ‘Local Networks’ section, select the radio b utton ne xt to ‘Choose local net work from list’ and select "LAN Primary Subnet" from the dropdown box. In the ‘Destination Net works’ section, select the radio butto n next to ‘Choose destination network from list’ and select "ch ...

  • SonicWALL TZ170 - page 6

    6 IKE (Phase 1) Proposal Exchange: Aggressive Mode DH Group: Group 5 Encryption: 3DES Authentication: SHA1 Life Time (seconds): 3600 Ipsec (Phase 2) Proposal Protocol: ESP Encryption: 3DES Authentication: SHA1 DH Group Group 2 Life Time (seconds): 3600 Do not enable Perfect Forward Securit y. Next select the ‘Advanced’ tab. Make sure that the o ...

  • SonicWALL TZ170 - page 7

    7 SonicWALL Setup Side Bob Log into the SonicWALL’s Management GUI usin g a current web browser. The address objects will be created first, and then a gro up wi ll be created to contain the address object s. From the navigation bar on the left, c lick on ‘Net work’ and then ‘Address Objects’, this will bring up the ‘Network > Address ...

  • SonicWALL TZ170 - page 8

    8 Name: checkpoint_lan Name: Side_Alice_lan Zone Assignment: VPN Zone Assignment: VPN Type: Network Type: Network Network: 192.168.170.0 Network: 180.10.10.0 Netmask: 255.255.255.0 Netmask: 255.255.255.0 Click ‘OK’ to finish. Click ‘OK’ to finish. Next create an address object grou p for t he two checkpoint address object s. On the ‘Netwo ...

  • SonicWALL TZ170 - page 9

    9 The ‘VPN Policy’ window will then appear. On the ‘General ’ tab pag e, ‘Security Policy’ se ction, select “IKE using Preshared Secret” from the ‘IPSec Keying Mode:’ dr opdown box. Name: "to_checkpoint" IPSec Primary Gateway Name or Address: 67.115.118.94 Shared Secret: HaRd!_to_Gue55_B0 b Local IKE ID: SNWL Identifie ...

  • SonicWALL TZ170 - page 10

    10 Next select the ‘Network’ tab. In the ‘Local Networks’ section, select the radio b utton ne xt to ‘Choose local net work from list’ and select "LAN Primary Subnet" from the dropdown box. In the ‘Destination Net works’ section, select the radio butto n next to ‘Choose destination network from list’ and select "c ...

  • SonicWALL TZ170 - page 11

    11 Ipsec (Phase 2) Proposal Protocol: ESP Encryption: 3DES Authentication: SHA1 DH Group Group 2 Life Time (seconds): 3600 Do not enable Perfect Forward Securit y. Next select the ‘Advanced’ tab. Make sure that the option Enable Keep Al ive has been check ed. All other options ca n be l eft as they are. Click the OK button. This completes the s ...

  • SonicWALL TZ170 - page 12

    12 Check Point FireWall-1NG Setup Log into SmartDashboard. Before the VPN can be setup it is necessary to cr eate Net work Objects for all devices and networks. To create the network objects, first click on ‘M anage’ on the top of the SmartDash board. Then click on ‘Network Objects…’ from the drop down box. The ‘Network Objects’ windo ...

  • SonicWALL TZ170 - page 13

    13 The ‘Network Properties’ window will then appear. In this window, enter the object: Name: CP_LAN Network Address: 192.168.170.0 Net Mask: 255.255.255.0 The next network objects to create are for the LAN of the SonicW AL L appliance at Side Alice a nd for the LAN of the SonicWALL appliance at Side Bob. From the ‘Network Objects’ windo w, ...

  • SonicWALL TZ170 - page 14

    14 Here we create the Network Object for the LAN of Side Bob. Make sure that the Object con t ains the corre ct LAN Network Address and Net Mask. Within our example we used: Name: Network_Bob Network Address: 10.234.234.0 Net Mask: 255.255.255 Next, edit the ‘Check Points’ net work object. It should be na med the same as the machi ne name then ...

  • SonicWALL TZ170 - page 15

    15 The ‘Check Point Gateway’ page will appear. On ‘General Properti es’, verify the ‘IP Address’ and that both ‘FireWall- 1’ and ‘VPN-1 Pro’ are selected. In this exam pl e, the ‘IP Addre ss’ is “192.168.170.1”. When finished, click ‘Topology’ on the left hand side. On ‘Topology’, verif y the network addresses of ...

  • SonicWALL TZ170 - page 16

    16 It is needed to create also Interoperable Network objects fo r the both SonicWALL app liances. Go to ‘Manage’ > ‘Net work Objects’ now the Network Objects windo w will then appear. To create the ‘Interoperable Devi ce ’ ob ject, click the ‘New’ button at the bottom of the ‘Network Obje cts’ window, then select ‘Interoper ...

  • SonicWALL TZ170 - page 17

    17 On the ‘Topology’ page, unde r the ‘VPN Domain’ section, sele ct ‘Manuall y d efined’ and se lect the previousl y created “Network_Alice” Net work Object with the dropdo wn menu. Click on ‘OK’ to finish. An Interoperable Device Object needs also to be created for Side Bob. Go to ‘Manage’ > ‘Net work Objects’ now th ...

  • SonicWALL TZ170 - page 18

    18 In this window, under ‘General Properti es’ enter: Name: SNWL_Bob IP Address: 80.62.91.20 Next click ‘Topology’ on the le ft hand sid e. On the ‘Topology’ page, unde r the ‘VPN Domain’ section select ‘Manuall y defined’ and sele ct the previousl y created “Network_Bob” Network Object with the dropdo wn menu. Click on ‘O ...

  • SonicWALL TZ170 - page 19

    19 From the ‘VPN Communities’ windo w, select the ‘New’ butto n on the bottom. Then select ‘Site To Site’ and ‘Star…’ The ‘Star Community Properties’ page will appear. On the ‘Star Community Properties’ page, enter the VPN name in the ‘Name:’ field. In this example, the ‘Name:’ is " HUB- TEST" which needs ...

  • SonicWALL TZ170 - page 20

    20 Next, click on ‘Satellite Gateways’. On the Satellite Gateways, click on the ‘Add…’ b utton under the ‘Satellite Gateways :’ section. This will bring up the ‘Satellite Gate ways’ window. Select here the address objects ‘SNWL_Alic e’ and address object ‘SNWL_Bob’ after this i s done press OK. ...

  • SonicWALL TZ170 - page 21

    21 Click on 'VPN Properties'. Enter the ‘IKE (Phase 1) Properties’ and the ‘IPsec (Phase 2) Properties ’. In this exampl e, the ‘IKE (Phase 1)’ section the settings are as follows: IKE (Phase 1) Properties Perform key exchange encryption with: 3DES Perform data integrity with: SHA1 Ipsec (Phase 2) Properties Perform IPsec data ...

  • SonicWALL TZ170 - page 22

    22 In the ‘Advanced Properties’ section, un der IKE (Phase 1), modify the ‘Renegotiate IKE securit y associations every’ fiel d to "60" minutes and the ‘Use Diffie-He llman group’ should be "Group 5 (1536 b it). Tick the option ‘Use aggressive mo de’ For the ‘Ipsec (Phase 2) Proposal’ section the settings are as f ...

Fabbricante SonicWALL Categoria Switch

I documenti che otteniamo dal fabbricante del dispositivoSonicWALL TZ170 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici SonicWALL
- manuali per l’uso TZ170
- schede prodotto SonicWALL
- opuscoli
- o etichette energetiche SonicWALL TZ170
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso SonicWALL TZ170.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione SonicWALL TZ170, manuali di manutenzione, brevi manuali o manuali utente SonicWALL TZ170. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto SonicWALL TZ170.

Manuali per l’uso simili

Manuale completo del dispositivo SonicWALL TZ170, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare SonicWALL TZ170 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti SonicWALL TZ170.

Il manuale per l’uso completo SonicWALL, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale SonicWALL TZ170 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice SonicWALL TZ170, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per SonicWALL TZ170 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo SonicWALL TZ170 - che ci dovrebbe aiutare nei primi passi durante l'uso SonicWALL TZ170
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del SonicWALL TZ170
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio SonicWALL TZ170 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su SonicWALL TZ170?

Utilizza il modulo sottostante

Se non hai risolto il problema con SonicWALL TZ170 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con SonicWALL TZ170 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)