-
Emerson CKS2237 - page 1
Jumbo Display Dual Alarm AM/FM Clock Radio with SmartSet ® Automatic T ime Setting System OWNER’S MANUAL CKS2237 Visit our web site at www .emersonradio.com ...
-
Emerson CKS2237 - page 2
1 For future reference, record the serial number in the space provided. Serial Number : Congratulations! And thank you for purchasing the Jumbo Display SmartSet ® Clock Radio from Emerson Research. SmartSet ® is the world’s first and only LED clock radio that will automatically set itself to the correct ‘Y ear ’, ‘Month’, ‘Date’, ? ...
-
Emerson CKS2237 - page 3
2 FCC INFORMA TION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, i ...
-
Emerson CKS2237 - page 4
3 PREP ARA TION FOR USE POWER SOURCE This radio is designed to operate on normal 1 10V-120V 60Hz AC power only . Do not attempt to operate the radio on any other power source. Y ou could cause damage to the radio that is not covered by your warranty. This radio should be connected to an AC outlet that is always ‘live’. Do not connect it to an o ...
-
Emerson CKS2237 - page 5
4 LOCA TION OF CONTROLS AND INDICA T ORS T op Panel 1. MONTH/DA TE Setting Button. 2. TIME setting Button. 3. ALARM MODE Button. (weekdays/weekends/everyday alarm) 4. ALM(Alarm) 1 Setting Button. 5. ALM(Alarm) 2 Setting Button. 6. SNOOZE/SLEEP OFF Button. 7. SET - Button. 8. SET + Button. 9. TIME ZONE Button. 10. SLEEP Button. 1 1. RADIO ON/OFF But ...
-
Emerson CKS2237 - page 6
5 OPERA TING INSTRUCTIONS SETTING THE TIME, THE FIRST TIME IMPORT ANT : The first time you connect your new SmartSet ® clock radio to the AC outlet the internal computer will automatically set the time correctly for the Eastern T ime Zone , which is the initial default setting. The display will scan for a few seconds and then set the correct month ...
-
Emerson CKS2237 - page 7
6 YEAR DISPLA Y T o see the correct year , depress the TIME and MONTH/DA TE buttons together . The small display changes from ‘month/date’ to ‘year ’. When you release the TIME and MONTH/DA TE buttons the small display returns to month and date. DA YLIGHT SA VING AND LEAP YEAR ADJUSTMENTS All Daylight Saving and Leap Y ear adjustments are m ...
-
Emerson CKS2237 - page 8
7 1. Depress and hold either the ALM 1 or ALM 2 setting button. The main display will change from the correct time to the Alarm 1 or Alarm 2 wake up time. 2. While holding the ALM 1 or ALM 2 setting button, depress either the SET + or SET – button to move the display ahead or back to your desired wake up time. 3. When the desired wake up time app ...
-
Emerson CKS2237 - page 9
8 LISTENING TO THE RADIO • Set the BAND selector to the desired band, AM or FM. • Set the VOLUME control to a low setting. • Press the RADIO ON/OFF button to turn the radio ‘On’. The radio dial pointer wil light. • Select your desired station with the TUNING control. • Adjust the VOLUME control to the desired setting. • When you are ...
-
Emerson CKS2237 - page 10
9 W AKE TO BUZZER 1. Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 2. Set the ALARM selector switch for one or both alarms to the BUZZER position. The appropriate ALM 1 and/or ALM 2 indicators will light up to confirm that the alarms are set. 3. At the selected wake up time the buz ...
-
Emerson CKS2237 - page 11
10 2. T o increase or decrease the amount of time that the radio will play before shutting of f, hold the SLEEP button and press either the SET + or SET – button to change the display to the desired sleep time, up to a maximum of 90 minutes or a minimum of 2 minutes. Note: When you change the sleep timer from the 10 minute default setting to a di ...
-
Emerson CKS2237 - page 12
11 2. Remove the battery from its package so it is ready to install. 3. Important: Leave the radio power cord connected to your AC outlet. This will provide power to the SmartSet ® computer memory while the original lithium battery is removed. 4. Place the radio face down and use a small screw driver to remove the screw securing the battery holder ...
-
Emerson CKS2237 - page 13
12 If the lithium battery is exhausted and you experience an interruption in the AC power supply, the clock will reset itself to its initial default setting when the power is restored. The initial default setting is 6:00 AM, Thursday, January 1st (1 . 1), 1998. If you notice that the time on your SmartSet ® clock radio is completely incorrect, and ...
-
Emerson CKS2237 - page 14
13 If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet becomes smudged or dirty, clean it with a soft, slightly dampened cloth. Never allow water or any liquid to get inside the cabinet. Never use any abrasive cleaners or cleaning pads as these will damage the finish of your radio. CARE AND MAINTENANCE FOR ADDITIONAL SET-UP OR O ...
-
Emerson CKS2237 - page 15
14 EMERSON RADIO CORP. LIMITED W ARRANTY What does this warranty cover ? Any manufacturing defects in original material, including original parts and workmanship, under normal use and conditions. For how long? For a period of ninety (90) days from the date of original purchase in the U.S. What will we do ? If you need service under this Warranty, a ...
-
Emerson CKS2237 - page 16
EMERSON Part No.: 16-7032 011- 02 Printed in China ...
Hai una domanda su Emerson CKS2237?
Utilizza il modulo sottostante
Se non hai risolto il problema con Emerson CKS2237 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Emerson CKS2237 è probabile che voglia condividere il modo di risolverlo.