Italiano dropdown-ico

Manuale per l’uso Fujitsu P19-3

37 pagine 0.84 mb
Scarica

Vai alla pagina of 37

Summary
  • Fujitsu P19-3 - page 1

    Monitor Operating Manual English SCENICVIEW B17-3/B19-3/P19-3 ...

  • Fujitsu P19-3 - page 2

    Are there… ... any technical problems or other questions which y ou would like to be clarified? Please contact our help desk (see Warranty Booklet). The latest information on our products, tips, updates, etc., can be found on the internet under: http://www.fujitsu-siemens.com ...

  • Fujitsu P19-3 - page 3

    ...

  • Fujitsu P19-3 - page 4

    This manual was produced by Xerox Global Serv ices Published by Fujitsu Siemens Computers GmbH Order No.: A 26361-K1143-Z120-1-7619 Edition 3 AG 08/07 ...

  • Fujitsu P19-3 - page 5

    SCENICVIEW B17-3/B19-3/P19-3 LCD monitor Operating Manual august 2007 edition ...

  • Fujitsu P19-3 - page 6

    VESA, DDC and DPMS are registered tradem arks of Video Electronics Standards Association. Copyright © Fujitsu Siemens Computers GmbH 2007 All rights, including rights of translation, reproduc tion by printing, copying or similar methods, in part or in whole, are reserved. Offenders will be liable for damages. All rights, including rights created b ...

  • Fujitsu P19-3 - page 7

    Contents Introduction ........................................................................................................................................... 1 Notational conventions ......................................................................................................... ........ 2 Important notes............................... ...

  • Fujitsu P19-3 - page 8

    Contents A26361-K1143-Z120-1-7619, edition 3 ...

  • Fujitsu P19-3 - page 9

    Introduction Your new LCD (Liquid Cry stal Display) monitor SCENICVIEW B17-3/B19-3/P19-3 offers numerous features and functions, for example: ● TFT display (Thin Film Transistor; ac tive matrix) ● minimal space requirements thanks to slim casing ● optimum ergonomic characteristics (totally distor tion-free, excellent picture definition and co ...

  • Fujitsu P19-3 - page 10

    SCENICVIEW B17-3/B19-3/P19-3 Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to text marked with th is symbol. Failure to observe this w arning endangers your life, destroys the device, or may lead to loss of data. ! i Supplementary information, remarks, and tips follow this ...

  • Fujitsu P19-3 - page 11

    SCENICVIEW B17-3/B19-3/P19-3 ● To ensure sufficient ventilation, the intake and exhaust air openings of the monitor must never be blocked. ● The monitor automatically sets itself to a mains voltage in the range of 100 V to 240 V. Ensure that the local mains voltage lies within these limits. ● Ensure that the power socket on the device or the ...

  • Fujitsu P19-3 - page 12

    SCENICVIEW B17-3/B19-3/P19-3 Power cable To guarantee safe operation, use the cable supplied. Us e the following guidelines if it is necessary to replace the original cable set. ● The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements. ● The cable has to be HAR-certified or VDE-ce rtified. The mark HAR or VDE will ap ...

  • Fujitsu P19-3 - page 13

    SCENICVIEW B17-3/B19-3/P19-3 FCC Class B Compliance Statement The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products w ill appear in the accompanying documentation. NOTE: This equipment has been tested and found to comply with the limits for a "Class B" d ...

  • Fujitsu P19-3 - page 14

    SCENICVIEW B17-3/B19-3/P19-3 Energy Star Guidelines The Fujitsu Siemens LCD monitor SC ENICVIEW B17-3/B19-3/P19-3 is designed to conserve electricity by dropping to less than 1 W when it goes into standby, suspend and OFF mode. With this new power management the LCD monitor SCENICVIEW B17-3/B19-3/P19-3 qualifies for the U.S. Environmental Protectio ...

  • Fujitsu P19-3 - page 15

    SCENICVIEW B17-3/B19-3/P19-3 Checking the contents of the consignment The display surface of the LCD monitor is sensitive to pressure and scratches. Always hold the device by the casing! ! ► Unpack all the individual parts. ► Check the delivery for damage incurred during transportation. ► Check whether the delivery agrees with the details in ...

  • Fujitsu P19-3 - page 16

    SCENICVIEW B17-3/B19-3/P19-3 Installing an ergonomic video workstation 1 1 2 1 = Windows Avoid direct and re flected glare. Avoid glare from electric lighting. 1 = Edge of desk 2 = Permissible reaching sector Position the keyboard where it is easiest to reach. 30° 30° 65° 65° 0° 60° 1 2 2 1 = Bearing surface for palms of hands 2 = Reaching ar ...

  • Fujitsu P19-3 - page 17

    SCENICVIEW B17-3/B19-3/P19-3 Mounting and removing the monitor base The display surface is susceptible to scrat ching! Therefore, lay the monitor on a soft surface when mounting or re moving the monitor base. ! Folding out monitor base When delivered the lower part of the monitor base is folded up and secured to the monitor by a collar. ! The monit ...

  • Fujitsu P19-3 - page 18

    SCENICVIEW B17-3/B19-3/P19-3 ► Proceed according to the four steps in the illustrations to fold out the monitor base. 10 A26361-K1143-Z120-1-7619, edition 3 ...

  • Fujitsu P19-3 - page 19

    SCENICVIEW B17-3/B19-3/P19-3 Removing monitor base Before you can use a swivel arm or a w all bracket, you must remove the monitor base: ! The display surface is susceptible to scratching! ► Switch off the monitor and pull the power plug out of the pow er socket. ► Lay the monitor on its face on a soft surface. ► Remove the cover and disconne ...

  • Fujitsu P19-3 - page 20

    SCENICVIEW B17-3/B19-3/P19-3 Connecting the monitor ! Please take note of the safety information in the " Important notes " chapter. CE conformance and optimum picture qualit y are guaranteed only if y ou use the data cables supplied. Do not cover the ventilati on openings of the monitor. The computer power plug must be pulled out! ► Be ...

  • Fujitsu P19-3 - page 21

    SCENICVIEW B17-3/B19-3/P19-3 Connecting cables to the monitor The monitor ports are protected by a cover. ► Remove the cover. 1 5 3 2 4 6 7 7 1 = Power connector 2 = DVI-D connection socket (DIGITAL) 3 = D-SUB connection socket (ANALOG) 4 = Security slot for "Kensington Lock" 5 = AUDIO-IN connector 6 = Cover position 7 = Holes for fixin ...

  • Fujitsu P19-3 - page 22

    SCENICVIEW B17-3/B19-3/P19-3 Connecting cables to the computer Information on the computer connec tions and interfaces is contained in the operating manual for your computer. If your computer has two monitor por ts ("onboard" screen controller and separate graphics card), the monitor port for the s eparate graphics card is usually active. ...

  • Fujitsu P19-3 - page 23

    SCENICVIEW B17-3/B19-3/P19-3 Adjusting portrait format The monitor can be turned from the "wide format" (landscape mode) into the "high format" position (portrait mode). ► Grasp the monitor with both hands on the right and left edge of the casing, move it into the highest position and turn it clockwise unt il it is in the port ...

  • Fujitsu P19-3 - page 24

    SCENICVIEW B17-3/B19-3/P19-3 Switching the monitor on and off (P19-3) The main switch on the underside and the On/Off swit ch on the front of the monitor are used to switch it on and off. ► Switch on the monitor via the main switch (4) on the underside. 3 4 2 1 3 2 1 1 = Buttons for the OSD menu (on-screen display) 2 = On/Off switch 3 = Mains pow ...

  • Fujitsu P19-3 - page 25

    SCENICVIEW B17-3/B19-3/P19-3 Notes on power management If your computer is equipped with power managemen t, the monitor can support this function fully . Here the monitor does not disti nguish between the indivi dual energy-saving modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately sw itching into the mo ...

  • Fujitsu P19-3 - page 26

    SCENICVIEW B17-3/B19-3/P19-3 Changing the monitor settings When putting the monitor into operation for the fi rst time, the screen display should be optimally adapted to the screen controller used and adjus ted in accordance with your needs. Choosing basic monitor settings using the supplied softw are If one of the operating systems Windows 95/98, ...

  • Fujitsu P19-3 - page 27

    SCENICVIEW B17-3/B19-3/P19-3 Locking the OSD menu The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings. ► Press and hold the SELECT/MENU button for a few seconds while y ou switch on the monitor with the ON/OFF switch. A message is displayed that the action has been performed. Please proceed in the same ...

  • Fujitsu P19-3 - page 28

    SCENICVIEW B17-3/B19-3/P19-3 The corresponding setting window (here: Image Adjust ) is display ed (on the right-hand side). The first function ( H-Position ) is highlighted. ► If necessary, press the 6 or 5 button to mark another function. ► Press the SELECT/MENU button to select the highlighted function. ► Press the 6 or 5 button to adjust t ...

  • Fujitsu P19-3 - page 29

    SCENICVIEW B17-3/B19-3/P19-3 Adjusting size and position Calling the Image adjust setting window H-Position Adjusting the horizontal position With this function you move the pi cture to the left or to the right. V-Position Adjusting the vertical position With this function you move the picture up or down. Clock Setting synchronisation With this fun ...

  • Fujitsu P19-3 - page 30

    SCENICVIEW B17-3/B19-3/P19-3 Setting display of the OSD menu Calling the OSD Setup setting window Language Setting language for the OSD menu With this function you choose between E nglish (default setting), French, German, Italian and Spanish as the language for the OSD menu. OSD H-Position Setting the horizontal pos ition of the OSD menu With this ...

  • Fujitsu P19-3 - page 31

    SCENICVIEW B17-3/B19-3/P19-3 Displaying information Calling the Information setting window With this function the model designation, serial number , resolution, H/V frequency, input signal and polarity of the sync hronisation signal are display ed. Notes on ergonomic colour adjustment If you select colours for the display in y our app lication prog ...

  • Fujitsu P19-3 - page 32

    SCENICVIEW B17-3/B19-3/P19-3 Troubleshooting Should an error occur, first check the following point s. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the probl em, please inform our help desk. Having this problem? Check the following points: No screen display (p ...

  • Fujitsu P19-3 - page 33

    SCENICVIEW B17-3/B19-3/P19-3 Having this problem? Check the following points: Picture is wrongly adjusted ► Press the SELECT/MENU button to activate the function Factory Recall . The Auto Processing message is displayed. Picture disturbances (vertical lines) ► Press the EXIT/AUTO button to perform the auto- adjustment of the screen. Picture dis ...

  • Fujitsu P19-3 - page 34

    SCENICVIEW B17-3/B19-3/P19-3 Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production tec hniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixe ls (picture elements) may be present. The maximum permitted number of pixels faults is stipulate ...

  • Fujitsu P19-3 - page 35

    SCENICVIEW B17-3/B19-3/P19-3 Technical data B17-3 B19-3 / P19-3 Dimensions and weight Visible diagonals: 43 cm 48 cm Dot pitch: 0.264 mm 0.294 mm Screen size: Width: Height: 337.9 mm 270.3 mm 376.3 mm 301 mm Maximal resolution: 1280 x 1024 1280 x 1024 Dimensions incl. monitor base: Box dimensions: Width: Height: Depth: Width: Height: Depth: 375 mm ...

  • Fujitsu P19-3 - page 36

    SCENICVIEW B17-3/B19-3/P19-3 Environmental conditions Environment class 3K2, IEC 721 Rated range of operation: Humidity: 15 °C .... 35 °C 20 % .... 85 % Limit range of operation: Humidity: 5 °C .... 35 °C 20 % .... 85 % Condensation must be avoided. VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interf ...

  • Fujitsu P19-3 - page 37

    SCENICVIEW B17-3/B19-3/P19-3 Pin assignment D-SUB 1 5 6 10 11 15 Pin Meaning Pin Meaning 1 Video input red 9 +5 V (DDC) 2 Video input green 10 Sync. earth 3 Video input blue 11 Earth 4 Earth 12 DDC-Data 5 Earth 13 H. sync 6 Red video earth 14 V. sync 7 Green video earth 15 DDC Clock 8 Blue video earth Monitor port DVI-D 1 9 17 Pin Meaning Pin Meani ...

Fabbricante Fujitsu Categoria Computer Monitor

I documenti che otteniamo dal fabbricante del dispositivoFujitsu P19-3 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Fujitsu
- manuali per l’uso P19-3
- schede prodotto Fujitsu
- opuscoli
- o etichette energetiche Fujitsu P19-3
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Fujitsu P19-3.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Fujitsu P19-3, manuali di manutenzione, brevi manuali o manuali utente Fujitsu P19-3. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Fujitsu P19-3.

Manuali per l’uso simili

Manuale completo del dispositivo Fujitsu P19-3, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Fujitsu P19-3 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Fujitsu P19-3.

Il manuale per l’uso completo Fujitsu, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Fujitsu P19-3 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Fujitsu P19-3, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Fujitsu P19-3 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Fujitsu P19-3 - che ci dovrebbe aiutare nei primi passi durante l'uso Fujitsu P19-3
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Fujitsu P19-3
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Fujitsu P19-3 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Fujitsu P19-3?

Utilizza il modulo sottostante

Se non hai risolto il problema con Fujitsu P19-3 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Fujitsu P19-3 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)