Italiano dropdown-ico

Manuale per l’uso Asus AP200

32 pagine 0.56 mb
Scarica

Vai alla pagina of 32

Summary
  • Asus AP200 - page 1

    ® A P200 Dual Pentium ® III Group Server Hardware Reference Guide ...

  • Asus AP200 - page 2

    AP200 Hardware Refer ence Guide 2 User ’ s Notice No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the pur - chaser for backup purposes, without the expres ...

  • Asus AP200 - page 3

    AP200 Hardware Refer ence Guide 3 ASUS Contact Information ASUST eK COMPUTER INC. (Asia-Pacific) Marketing Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 1 12 T elephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw T echnical Support T el (English): +886-2-2890-7123 T el (Chinese):+886-2-2890-71 13 Fax: +886-2-2895-9254 Email ...

  • Asus AP200 - page 4

    AP200 Hardware Refer ence Guide 4 Contents I. Introduction 1-1. Sections ........................................................................... 7 1-2. Component Checklist ....................................................... 7 1-3. Features ........................................................................... 8 1-4. Safeguards ........ ...

  • Asus AP200 - page 5

    AP200 Hardware Refer ence Guide 5 Contents 4-2. Motherboard ................................................................... 19 Motherboard Screws ......................................................... 19 Chassis Intrusion Photo Sensor ....................................... 20 Panel Connections ............................................... ...

  • Asus AP200 - page 6

    AP200 Hardware Refer ence Guide 6 FCC & DOC Compliance Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interfer - ence that may ca ...

  • Asus AP200 - page 7

    7 I. Introduction AP200 Hardware Refer ence Guide I. Introduction The AP200 Hardware Reference Guide provides information and proce- dures on the various components used in this server . This guide is intended for experienced users and integrators with hardware knowledge of personal computers. Y ou should also read all documentation and manuals inc ...

  • Asus AP200 - page 8

    8 I. Introduction AP200 Hardwar e Refer ence Guide I. Introduction Features 1-3. Features The AP200 is a group server configured on the ASUS P2B-DS/P2B-D smart motherboard which uses the 440BX chipset from Intel and supports two Pentium III/II processors and 100MHz front side bus in order to handle any complicated task. • Dual Intel Pentium III/I ...

  • Asus AP200 - page 9

    9 I. Introduction AP200 Hardware Refer ence Guide I. Introduction 1-4. Safeguards Observe the following safety instructions any time you are connecting or disconnecting any devices. Operation Safety T ools Required A Phillips (cross) screwdriver and a standard (flat) screwdriver are needed to install or remove the components in this server . IMPOR ...

  • Asus AP200 - page 10

    10 I. Introduction AP200 Hardwar e Refer ence Guide I. Introduction Electrical Safety IMPOR T ANT • Before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged. • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating t ...

  • Asus AP200 - page 11

    11 I. Introduction AP200 Hardware Refer ence Guide I. Introduction 1-5. Preparation 1. Unpack your server , but do not connect the power cord. Preparation 2. Unlock the padlock if one is used. This server is equipped with a lock- able panel to prevent unauthorized access. Open the side panel. 3. Install final server components such as CPU, memory , ...

  • Asus AP200 - page 12

    12 II. Components AP200 Hardwar e Refer ence Guide II. Components 2-1. System Overview Front V iew A B C D F E I J H G A. T op Panel B. LED Status Indicator C. CD-ROM Drive D. 5.25” Device Bays E. A TX Power Button F . Floppy Disk Drive G. Reset Button H. Infrared W indow (Reserved) I. Left Panel J. Chassis Stabilizers Front View ...

  • Asus AP200 - page 13

    13 II. Components AP200 Hardware Refer ence Guide II. Components Rear V iew A B C D E F G H I J K L M N O P A. T op Panel Screw B. Air Outlet V ents C. Power Supply Fan D. Power Supply Switch E. V oltage Selection F . AC Power In Connector G. PS/2 Keyboard H. PS/2 Mouse I. Chassis Fan J. USB Ports 1 and 2 K. Serial Ports COM1 and COM2 L. Parallel P ...

  • Asus AP200 - page 14

    14 II. Components AP200 Hardwar e Refer ence Guide II. Components Side View A B C D E F G H I J L M K A. CD-ROM Drive B. 5.25” Device Cage C. Floppy Disk Drive D. 3.5” Device Cage E. Hard Disk Drive F . Fan Module G. Speaker H. Long Card Guide I. Hard Disk Drive Carrier Plate J. Power Supply K. Chassis Fan L. Stabilizing Link Bar M. Motherboard ...

  • Asus AP200 - page 15

    15 II. Components AP200 Hardware Refer ence Guide II. Components Chassis Features 2-2. Chassis Features 5.25” Device Cage The 5.25” device cage is used for mounting three 5.25” devices such as CD- ROM, tape, and hard disk drives. 3.5” Device Cage The 3.5” device cage is used for mounting one 3.5” floppy device, such as a 1.44MB floppy , ...

  • Asus AP200 - page 16

    16 III. Getting Started AP200 Hardwar e Refer ence Guide III. Getting Started Startup / LED / BIOS 3-1. Starting the Server T urn on the system unit by turning the power knob clockwise and pushing inwards momentarily . The power button will snap back because A TX power systems have an electrical On/Of f switch unlike A T systems which require a per ...

  • Asus AP200 - page 17

    17 IV . Hardware Setup AP200 Hardware Refer ence Guide IV . HW Setup 4-1. Chassis Removing the Left Panel The left panel needs to be removed to gain access to the internal system. Left Panel Removal Procedur e: 1. Remove the padlock if one is used on the left panel. 2. Remove the thumb screw on the back of the left panel. 3. Pull the left panel awa ...

  • Asus AP200 - page 18

    18 IV . Hardware Setup AP200 Hardwar e Refer ence Guide IV . HW Setup Chassis Removing the Front & T op Panels Before removing the front panel, the top panel must be unscrewed and re- moved. Lean the front panel over the edge of a table or book. Reach your fingers up into the front panel and pull the front panel away from the chassis. Device Ba ...

  • Asus AP200 - page 19

    19 IV . Hardware Setup AP200 Hardware Refer ence Guide IV . HW Setup Motherboard Stabilizing Link Bar The stabilizing link bar needs to be removed in order to access the mother - board or remove the 3.5” device cage. T o remove the stabilizing link bar , grasp the bar at the back end with the right hand and with the right thumb press the back of ...

  • Asus AP200 - page 20

    20 IV . Hardware Setup AP200 Hardwar e Refer ence Guide IV . HW Setup Motherboard Chassis Intrusion Photo Sensor This motherboard has a photo sensor onboard, which detects extreme levels of light entering the chassis such as when the chassis is opened, and sends a signal to the ASMA software in such an event. T o enable this function, Jumper18 must ...

  • Asus AP200 - page 21

    21 IV . Hardware Setup AP200 Hardware Refer ence Guide IV . HW Setup 3.5” Device Cage 4-3. 3.5” Device Cage Before hard or floppy disk drives can be installed or removed from the 3.5” device cage, you must remove the device cage from the chassis. 3.5” Device Cage Removal Procedure 1. Remove the stabilizing link bar , if not already removed. ...

  • Asus AP200 - page 22

    22 IV . Hardware Setup AP200 Hardwar e Refer ence Guide IV . HW Setup Floppy Disk Drive Cable Connections The 1.44MB floppy disk drive requires signal and power connections. Align the red stripes of the signal and power cables so that they face each other . Carefully insert the connector while visually watching the progress so that proper alignment ...

  • Asus AP200 - page 23

    23 IV . Hardware Setup AP200 Hardware Refer ence Guide IV . HW Setup Hard Disk Drives CD-ROM Drive Mounting and Connections The CD-ROM disk drive mounts only in the 5.25” device cage and requires signal and power connections. The red stripe of the signal and power cables should face each other . NOTE: A CD-ROM audio cable is also provided in case ...

  • Asus AP200 - page 24

    24 IV . Hardware Setup AP200 Hardwar e Refer ence Guide IV . HW Setup Hard Disk Drives Mounting the Hard Drive above the Power Supply Insert the carrier plate and hard disk drive into the slot on the bottom of the chassis top panel. Ultra2 SCSI Hard Drive Cable Connections For proper signal stability , a special twisted ribbon cable must be used to ...

  • Asus AP200 - page 25

    25 IV . Hardware Setup AP200 Hardware Refer ence Guide IV . HW Setup Air Circulation System External SCSI T erminator In order to prevent SCSI signal loss, the provided external SCSI terminator must be used at the end of the 68-pin SCSI cable. 50-pin SCSI cables may also use terminators but usually use termination jumpers on the device it- self. Al ...

  • Asus AP200 - page 26

    26 IV . Hardware Setup AP200 Hardwar e Refer ence Guide IV . HW Setup Card Guide / Speaker 4-7. Long Card Guide T o reach into the inside front of the chassis, you may want to remove the long card guide first. Press the plastic clips with a screwdriver as shown. Press the clips with a screwdriver to release. 4-8. System Speaker The standard system ...

  • Asus AP200 - page 27

    27 IV . Hardware Setup AP200 Hardware Refer ence Guide IV . HW Setup Power Supply 4-9. Power Supply Removing the Power Supply Unmounting the power supply must be done from the inside of the chassis. Remove the left panel of the chassis and the four screws securing the power supply . Press inward to release the power supply . Press inward to release ...

  • Asus AP200 - page 28

    28 IV . Hardware Setup AP200 Hardwar e Refer ence Guide IV . HW Setup Power Information 4-10. Power Information Output V oltage Regulation Output Min Max T olerance +5.0V +4.75V +5.25V ±5% +12.0V +1 1.40V +12.60V ±5% +3.3V +3.135V +3.465V ±5% -12.0V -1 1.40V -12.60V ±5% -5.0V -4.75V -5.25V ±5% Output Current Capacity Load Min (A) Nom (A) Max ( ...

  • Asus AP200 - page 29

    29 V . Appendix AP200 Hardware Refer ence Guide V . Appendix SCSI Cable Limits i. SCSI Cable Limits SCSI cables have a limit to the length that it may have. Exceeding the length may cause problems mounting or using any one of the SCSI devices. Cable Limits Max Data T ransfer Rates Max Devices 1) 12m (29.4ft) Ultra2-SCSI (68-pin 80MB/Sec) 15 2) 3m - ...

  • Asus AP200 - page 30

    30 V . Appendix AP200 Hardwar e Refer ence Guide V . Appendix SCSI Cabling ii. SCSI Connection Example This is an example of how SCSI devices can be connected to your server . • T wo 9GB Ultra2-SCSI hard disks in the 3.5” cage can be connected to the Ultra2 connector on the motherboard for 18GB of main storage. • One Ultra-SCSI tape drive in ...

  • Asus AP200 - page 31

    31 V . Appendix AP200 Hardware Refer ence Guide V . Appendix ASUS RAID Solutions iii. ® RAID Solutions ASUS PCI-DA2100/2200 Series SCSI RAID Card • PCI-DA2100 series support 4x86 DX4-100 processor • PCI-DA2200 series support 5x86-133 processor • One 72-pin SIMM socket supports up to 128MB cache memory • RAID levels 0, 0+1, 3, 5, non-RAID ? ...

  • Asus AP200 - page 32

    32 V . Appendix AP200 Hardwar e Refer ence Guide V . Appendix ASUS Barebone Servers iv . ® Barebone Servers Pentium ® III PC100 ECC Ultra2 SCSI 5.25” Pentium ® II Max. Memory Onboard Fixed Storage Hot-Swap T rays Support (GB) (Channels) Devices AP100 111 3 0 AP200 211 3 0 AP2000 2 1 1 4 3 or 5* AP2500 2 1 1 4 3 or 5* AP3000 2 Xeon™ 2 2 4 3 o ...

Fabbricante Asus Categoria Personal Computer

I documenti che otteniamo dal fabbricante del dispositivoAsus AP200 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Asus
- manuali per l’uso AP200
- schede prodotto Asus
- opuscoli
- o etichette energetiche Asus AP200
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Asus AP200.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Asus AP200, manuali di manutenzione, brevi manuali o manuali utente Asus AP200. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Asus AP200.

Manuali per l’uso simili

Manuale completo del dispositivo Asus AP200, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Asus AP200 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Asus AP200.

Il manuale per l’uso completo Asus, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Asus AP200 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Asus AP200, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Asus AP200 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Asus AP200 - che ci dovrebbe aiutare nei primi passi durante l'uso Asus AP200
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Asus AP200
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Asus AP200 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Asus AP200?

Utilizza il modulo sottostante

Se non hai risolto il problema con Asus AP200 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Asus AP200 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)