Italiano dropdown-ico

Manuale per l’uso Magnavox CCZ196AT

64 pagine 1.12 mb
Scarica

Vai alla pagina of 64

Summary
  • Magnavox CCZ196AT - page 1

    Owner’s Manual Important! Return your Warranty Registration Card within 10 days. See why inside. Color TV with built-in VCR CCZ196AT CCZ196comb.QX33 4/6/99 7:04 PM Page 1 ...

  • Magnavox CCZ196AT - page 2

    Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. Return your Warranty Registration card today to ensure you receive all the ...

  • Magnavox CCZ196AT - page 3

    Introduction 3 Features • A-B Repeat Play • Automatic Channel Setup • Automatic Operation Features • Automatic Tracking Adjustment • Closed Caption • Daylight-Saving Time • High Quality (HQ) System • Index Search • MTS (Multi-Channel Television Sound) System • On-Screen displays in English or Spanish • On-Screen Menu Programmi ...

  • Magnavox CCZ196AT - page 4

    4 Table of Contents Setting Up Your TV/VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Before Using the TV/VCR . . . . . . . . . . . . . ...

  • Magnavox CCZ196AT - page 5

    • The remote control and its batteries are supplied. • Do not mix alkaline and man- ganese batteries. • Do not mix old and new batteries. Before Using the TV/VCR 5 Putting Batteries in the Remote Control 1 Remove the battery compartment lid on the bottom of the remote control by pressing in the tab and lifting the lid. 2 Place three AA batter ...

  • Magnavox CCZ196AT - page 6

    6 Hooking Up The TV/VCR ANT. ANT. L R AUDIO IN VIDEO IN Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna ANT. L R AUDIO IN VIDEO IN IN OUT ANT. Connect an RF coaxial cable (75- ohm, not supplied) to the OUT Jack on the Cable Box and to the ANT(enna) Jack on the TV/VCR. Connect a Cable signal or an antenna to the ANT(enna) Jack. Hooking ...

  • Magnavox CCZ196AT - page 7

    Hooking Up The TV/VCR (cont’d) 7 ANT. L R AUDIO IN VIDEO IN CH3 CH4 OUT IN ANT R L VIDEO IN OUT IN OUT AUDIO VIDEO IN AUDIO IN L R ANT. • Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) J ...

  • Magnavox CCZ196AT - page 8

    8 Turning On the TV/VCR Before you turn on the TV/VCR, make sure there are batteries in the remote control and the TV/VCR is hooked up correctly. The instructions on this page work only when you turn on the TV/VCR for the first time. 1 Press the POWER button. The TV/VCR will come on and the screen shown below will appear. 2 Press the PLAY/ K button ...

  • Magnavox CCZ196AT - page 9

    Language Selection 9 Follow the steps below to change the language of the on-screen displays and menus. 3 Press the PLAY/ ▲ button or the STOP/ ▼ button to choose SELECT LANGUAGE. Then, press the F.FWD/ B button. 4 Press the PLAY/ ▲ button or the STOP/ ▼ button to select ENGLISH or ESPAÑOL (Spanish). 5 Press the STATUS/EXIT button. SELECT ...

  • Magnavox CCZ196AT - page 10

    10 Automatic Channel Setup Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following the steps below. 1 Press the COMBI button, then press the MENU button. TO ADJUST PRESS { / B > INPUT EXIT PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION CABLE 2 Press the ...

  • Magnavox CCZ196AT - page 11

    Automatic Channel Setup (cont’d) 11 4 Press the F.FWD/ B button or the REW(ind)/ { button to select SAVED (to add that channel) or DELETED (to delete that channel). 5 Press the STATUS/EXIT button. Programming of the channel you added or deleted will appear. 3 Press the Number buttons or the CH(annel). Up/Down buttons to enter the channel number y ...

  • Magnavox CCZ196AT - page 12

    12 Setting the Clock • Entries that do not match the TV/VCR’s calendar will cause a question mark (?) to appear on the screen. • To make corrections while you are setting the clock, press the CLEAR button until the space for the num- ber you want to correct is flashing. Then enter the correct number. Helpful Hints 2-3 There are three ways to ...

  • Magnavox CCZ196AT - page 13

    Setting the Clock (cont’d) 13 5 Press two Number buttons for the hour(s) and two Number buttons for the minute(s). Then press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2. SET MANUAL CLOCK TIME 09 : 30 PM MONTH – – / – – / – – TO CORRECT PRESS CLEAR TO END PRESS EXIT 6 Press two Number buttons for the month, two Num ...

  • Magnavox CCZ196AT - page 14

    14 Setting the Clock (cont’d) Automatic PBS Channel Selection 4 If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the F.FWD/ B button so that ON appears to the right of AUTO CLOCK, then press the MENU button. 1 Press the COMBI button, then press the MENU button. 2 Press the PLAY/ ▲ button or the STO ...

  • Magnavox CCZ196AT - page 15

    Setting the Clock (cont’d) 15 7 When the TV/VCR finds the PBS channel, the time will appear on-screen. Press the STATUS/EXIT button. 6 NOW SEARCHING flashes on the TV/VCR screen. However, you may see the message: “PLEASE TURN OFF TO SET AUTO CLOCK PLEASE WAIT SEVERAL MINUTES.” If this message appears, turn off the TV/VCR for a few minutes. Wh ...

  • Magnavox CCZ196AT - page 16

    16 Setting the Clock (cont’d) Manual PBS Channel Selection 4 If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the F.FWD/ B button so that ON appears to the right of AUTO CLOCK, then press the MENU button. 1 Press the COMBI button, then press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ...

  • Magnavox CCZ196AT - page 17

    Setting the Clock (cont’d) 17 8 When the TV/VCR finds the clock data, the time will appear on-screen. Press the STATUS/EXIT button. 6 Use the Number buttons to select your PBS station. If you make a mistake, press the CLEAR button, then enter the correct number. ● If CANNOT FIND CLOCK DATA flashes on the TV/VCR screen and you know another PBS c ...

  • Magnavox CCZ196AT - page 18

    18 Daylight-Saving Time 5 2-4 4 Press the PLAY/ ▲ button or the STOP/ ▼ button to select DAYLIGHT SVG.TIME. Then, press the F.FWD/ B button so that ON or OFF appears beside DAYLIGHT SVG. TIME (Daylight Saving Time). 5 Press the STATUS/EXIT button. 1 Press the COMBI button, then press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ? ...

  • Magnavox CCZ196AT - page 19

    Time Zone 19 • If you select AUTO at step 5, the TV/VCR will set the clock according to the time zone data of the PBS station it finds. • You cannot select SET TIME ZONE at step 4 if AUTO CLOCK is set to OFF. Helpful Hints 5 Press the PLAY/ ▲ button or the STOP/ ▼ button to select a time zone. 6 Press the MENU button. 7 Press the STATUS/EXI ...

  • Magnavox CCZ196AT - page 20

    2 Find your code. 20 Setting the Remote to Operate a Cable Box/DBS 4 Within 30 seconds, press the CABLE/DBS button. 3 Press the MUTE button. Your TV/VCR remote control may operate your Cable Box/DBS. If the remote control doesn’t operate your Cable Box/DBS now, follow the steps below to program your remote control. 1 Turn on your Cable Box/DBS. P ...

  • Magnavox CCZ196AT - page 21

    • Although the remote control that comes with your TV/VCR will work most Cable Boxes and DBSs, it is possible that the remote control will not operate your Cable Box or DBS. • The remote control may only oper- ate some features of your Cable Box or DBS. For example, some Cable Boxes may only be turned on at the Cable Box, therefore the remote c ...

  • Magnavox CCZ196AT - page 22

    22 Front Panel STOP/EJECT REW PLAY F.FWD REC/OTR CHANNEL VOLUME POWER MTS MULTI TV STEREO head Cassette Compartment Insert a video cassette tape here. POWER Button Press to turn the power on or off. When you press the POWER button to turn on the TV/VCR, the remote locator will be activat- ed. Details are on page 28. VOLUME o / p Buttons Press to ad ...

  • Magnavox CCZ196AT - page 23

    Rear Panel 23 ANT. L R AUDIO IN VIDEO IN ANT(enna) Jack Connect your antenna or cable here. Details are on pages six - seven. Antenna Hole Connect the stem of an indoor antenna here. Details are on page six. AC Power Cord Connect to a standard AC outlet to supply power to the TV/VCR. AUDIO IN Jacks Connect these jacks to the audio out jacks of a ca ...

  • Magnavox CCZ196AT - page 24

    24 Remote Control Buttons CH(annel). Up/Down Buttons Press to scan through the channels of the TV/VCR or the Cable Box/DBS. A.CH (Alternate Channel) Button Press to return to the TV channel you were viewing immediately before switching to your current channel. POWER Button Press to turn on or off the TV/VCR, Cable Box, or Direct Broadcast System. ( ...

  • Magnavox CCZ196AT - page 25

    VAR.SLOW CABLE/DBS COMBI VOL. CH. A.CH +100 3 6 9 0 2 5 8 1 4 7 TRACKING F.ADV SLEEP REC/OTR POWER SPEED STATUS/EXIT STOP PLAY F.FWD REW MEMORY SLOW MUTE VCR PLUS+ /ENTER SMART PICTURE SKIP SEARCH SMART SOUND INDEX SEARCH EJECT MENU CLEAR PAUSE/STILL • Press the COMBI button before pressing other TV/VCR buttons; press the CABLE/DBS button before ...

  • Magnavox CCZ196AT - page 26

    VAR.SLOW CABLE/DBS COMBI VOL. CH. A.CH +100 3 6 9 0 2 5 8 1 4 7 TRACKING F.ADV SLEEP REC/OTR POWER SPEED STATUS/EXIT STOP PLAY F.FWD REW MEMORY SLOW MUTE VCR PLUS+ /ENTER SMART PICTURE SKIP SEARCH SMART SOUND INDEX SEARCH EJECT MENU CLEAR PAUSE/STILL TO ADJUST PRESS { / B 26 Adjusting the Picture Controls Follow these steps to adjust the TV/VCR’s ...

  • Magnavox CCZ196AT - page 27

    Smart Picture 27 The Smart Picture feature allows you to improve the TV/VCR’s picture when viewing sports, a movie, or video games; to improve the picture when the antenna/cable signal is weak; or to reset the picture controls to their original settings. 1 Press the SMART PICTURE button repeatedly until the Smart Picture mode you want appears on ...

  • Magnavox CCZ196AT - page 28

    28 Remote Locator Your TV/VCR can find your remote control for you. When you press the POWER button on the TV/VCR to turn on the TV/VCR, your remote control beeps and LOCATING REMOTE appears on-screen. The remote control will beep for about 30 seconds. Or, press any button on the remote control to stop the beeping. If another remote control beeps.. ...

  • Magnavox CCZ196AT - page 29

    • If the channel you select has no broadcast, the screen will be solid blue. • You cannot view closed captions during recording or tape playback if COUNTER ONLY is set to ON. Details are on pages 45 - 46. Helpful Hints 1 Press the COMBI button, then press the MENU button. A status display will appear when you press the STATUS/EXIT button or cer ...

  • Magnavox CCZ196AT - page 30

    30 Reminder The channel number will remain on-screen at all times when you set REMINDER to ON in the pop up menu. The exception is dur- ing tape playback, Forward and Reverse Searching and Still modes, and when closed captioning is selected (CAPTION in the pop up menu). Set REMINDER to ON or OFF by following the steps below. 1 Press the COMBI butto ...

  • Magnavox CCZ196AT - page 31

    Playing 31 • If the tape you want to play is already in the TV/VCR, turn on the TV/VCR power, then press the COMBI button, then press the PLAY/ ▲ button. • Playback features and options are on pages 48 - 54. Helpful Hints Follow the steps below to play a tape. 1 Insert a tape in the TV/VCR. The power will come on. If the tape’s record tab h ...

  • Magnavox CCZ196AT - page 32

    32 Recording • You cannot record one channel while watching another. • Recording options are on pages 33 - 43. • You cannot record if DEFEAT RECORDING is set to ON. (REC DEFEATED will flash on-screen.) Details are on page 43. • If you pause a recording for more than five minutes, the TV/VCR will switch to Stop mode automatically to protect ...

  • Magnavox CCZ196AT - page 33

    One-Touch Recording 33 The One-Touch Recording (OTR) function allows you to program an immediate timed recording from 30 minutes to eight hours long without setting the timer. Before you begin, make sure: ● Channels are set up. ● There is a tape in the TV/VCR. The record tab must be intact. 1 Press the COMBI button, then use the CH(annel). Up/D ...

  • Magnavox CCZ196AT - page 34

    34 Rerecording (Tape Duplication) • Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws. • Different brands of equipment may operate differently. • Make sure all connections are secure. Otherwise, you may not record both picture ...

  • Magnavox CCZ196AT - page 35

    Timer Recording 35 Follow the steps below to program the TV/VCR to record TV programs while you’re away from home. The TV/VCR will turn itself on, record, and turn itself off automatically. Before you begin, make sure: ● The clock is set. If not, CLOCK MUST BE SET appears. ● Channels are set up. ● There is a tape in the TV/VCR. (Make sure t ...

  • Magnavox CCZ196AT - page 36

    ONE TIME PROGRAM PROGRAM 1 CHANNEL – – TO CORRECT PRESS CLEAR TO END PRESS EXIT 36 Timer Recording (cont’d) 5 ● Enter the channel of the TV program you want to record (you must enter a 0 before all single-digit channels). ● If you are recording from line input, press 0, 0. A/V IN will appear on-screen. ● If you are recording using a Cab ...

  • Magnavox CCZ196AT - page 37

    Timer Recording (cont’d) 37 The TV/VCR must be off for a timer record- ing! Make sure there i s a tape in the TV/VCR. 8 Press the Number 1 button to record in SP speed, press the Number 2 button to record in LP speed, or press the Number 3 button to record in SLP speed. Details about tape speed are on page 32. You cannot use the SPEED button at t ...

  • Magnavox CCZ196AT - page 38

    38 Timer Recording (cont’d) 6 Repeat steps 1 - 4 to make sure you have cleared the correct position. Checking or Clearing Timer Recordings 1 With the TV/VCR on, press the COMBI button, then press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select VCR PROGRAM, then press the F.FWD/ B button. 3 Press the PLAY/ ▲ butto ...

  • Magnavox CCZ196AT - page 39

    Setting Up the VCR Plus+ Programming System 39 1 First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCR Plus+ programming system to work properly. Since the channel numbers of the stations you receive may not be the same as the station numbers, and since channel numbers differ from area to are ...

  • Magnavox CCZ196AT - page 40

    40 Setting Up the VCR Plus+ Programming System (cont’d) 2 Now, compare the channel numbers you have written in the VCR PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that do not match. Where the channel numbers DO NOT mat ...

  • Magnavox CCZ196AT - page 41

    1 Press the COMBI button, then press the VCR PLUS+/ENTER button. VCR PLUS+ PROGRAM PLUS CODE : – – – – – – – – TO END PRESS EXIT Timer Recording With the VCR Plus+ Programming System 41 Follow the steps below to program a timer recording using the PlusCode programming numbers in your TV guide. Before you begin, make sure: ● The cl ...

  • Magnavox CCZ196AT - page 42

    42 Timer Recording With the VCR Plus+ Programming System (cont’d) • To exit the VCR Plus+ programming system at any time, press the STA- TUS/EXIT button. The display will disappear from the screen. • To stop a started timer recording, press the STOP/EJECT button on the TV/VCR. • If the power fails, programmed timer recordings will not be lo ...

  • Magnavox CCZ196AT - page 43

    Defeat Recording 43 Follow the steps below to prevent accidental recording. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select VCR SETUP, then press the F.FWD/ B button. 3 Press the PLAY/ ▲ button or the STOP/ ▼ button to select DEFEAT RECORDING, then press the F.FWD/ B button so that ON appears beside DEFEAT RECORDING. 4 Press the ...

  • Magnavox CCZ196AT - page 44

    44 Setting the Sleep Timer Use the sleep timer to program the TV/VCR to shut off in a cer- tain amount of time. 1 Press the COMBI button, then press the SLEEP button. The sleep timer display will appear on-screen. (You can not set the sleep timer during a recording.) 1-2 • Finish all recordings before the TV/VCR shuts itself off. If a record- ing ...

  • Magnavox CCZ196AT - page 45

    When you watch a program that is being broadcast with closed captions, you can access on-screen boxes containing the pro- gram’s dialogue (for example, what a character is saying), dialogue in a foreign language, or information (such as a channel guide, schedule, or announcements). Follow the steps below to select closed captions. Not all TV prog ...

  • Magnavox CCZ196AT - page 46

    46 Closed Caption (cont’d) • You cannot view closed captions during recording or tape playback if COUNTER ONLY is set to ON. • Abbreviations, symbols, and other grammatical shortcuts are often used in order to keep pace with the on-screen action. This does not indi- cate a problem with the TV/VCR. • To cancel closed captions, follow steps 1 ...

  • Magnavox CCZ196AT - page 47

    VAR.SLOW CABLE/DBS COMBI VOL. CH. A.CH +100 3 6 9 0 2 5 8 1 4 7 TRACKING F.ADV SLEEP REC/OTR POWER SPEED STATUS/EXIT STOP PLAY F.FWD REW MEMORY SLOW MUTE VCR PLUS+ /ENTER SMART PICTURE SKIP SEARCH SMART SOUND INDEX SEARCH EJECT MENU CLEAR PAUSE/STILL Usually, the volume bar appears when you press the VOL(ume). Up/Down buttons. If you do not need it ...

  • Magnavox CCZ196AT - page 48

    48 Repeat Play Follow the steps below to program the TV/VCR to play a tape over and over. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select VCR SETUP, then press the F.FWD/ B button. 3 Press the PLAY/ ▲ button or the STOP/ ▼ button to select REPEAT PLAY, then press the F.FWD/ B button so that ON appears beside REPEAT PLAY. 4 Press ...

  • Magnavox CCZ196AT - page 49

    A - B Repeat Play 49 • To cancel A-B Repeat Play, set ONE TIME PLAY to ON. To set ONE TIME PLAY to ON, follow steps 1 - 3 above. Then, press the PLAY/ o button or the STOP/ p button to select ONE TIME PLAY. Press the F.FWD/ B button so that ON appears beside ONE TIME PLAY. Then, press the STATUS/EXIT but- ton. • The end position (B) must be lat ...

  • Magnavox CCZ196AT - page 50

    6 Press the STATUS/EXIT button to remove the display. A- B REPEAT will appear on-screen. Beneath it, the letter A will flash beside the real-time counter. . A-B REPEAT A 1:23:45 7 Play, fast forward, or rewind the tape to the position at which you want to begin playback. Stop the tape, then press the MEMORY button to set the start position (A). The ...

  • Magnavox CCZ196AT - page 51

    Real-Time Counter Memory 51 Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later. 1 Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape. 2 Press the STATUS/EXIT button. The real-time counter will appear on-screen. 3 While the counter remains ...

  • Magnavox CCZ196AT - page 52

    52 Index Search This feature allows you to index the starting points of programs that you have recorded on a tape. Then, you can easily rewind or fast forward to that point. Example: If you are watching program number 4 and you want to fast for- ward to program number 7, skip three programs. Pro. 1 Pro. 2 Pro.3 Pro. 4 Pro. 5 Pro. 6 Pro. 7 CURRENT P ...

  • Magnavox CCZ196AT - page 53

    Automatic Operation Features 53 The following playback features will always operate. Automatic Playback When you put a tape in the TV/VCR, the power will come on automatically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab ...

  • Magnavox CCZ196AT - page 54

    54 Playback Options Forward and Reverse Searching (SP/LP/SLP) 1 During tape playback, press and release the F.FWD/ B button or the REW(ind)/ { button. A fast forward or reverse picture search will begin. 2 To return to normal playback, press the PLAY/ ▲ button. Super High Speed Searching (LP/SLP) 1 During tape playback, press the F.FWD/ B button ...

  • Magnavox CCZ196AT - page 55

    MTS Broadcast Stereo System 55 Your TV/VCR can receive a program broadcast in stereo or with second audio (usually, that means a pro- gram is broadcast with a second language). When the second audio is available, you can select either the main audio (Mono) or the second audio. But your TV/VCR can record only the sound you select. Select a sound by ...

  • Magnavox CCZ196AT - page 56

    56 MTS Broadcast Stereo System (cont’d) 4 Press the STATUS/EXIT button . 1 Press the COMBI button, then press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select STEREO/SAP. 3 Press the REW(ind)/ s button or the F.FWD/ B button to select STEREO, SAP, or MONO. TO ADJUST PRESS { / B > STEREO/SAP CHANNEL INPUT EXIT PRI ...

  • Magnavox CCZ196AT - page 57

    Specifications General CRT: 19-inch in line gun Television system: NTSC-M Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard Video Heads: Four heads Tape width: 1/2 inch (12.65 mm) Tape speed SP: 33.35 mm/sec. LP: 16.67 mm/sec. SLP: 11.12 mm/sec. Operating Temperature: 41˚F (5˚C) to 104˚F (40˚C) Relative Hum ...

  • Magnavox CCZ196AT - page 58

    58 Helpful Hints Location For safe operation and satisfactory performance of your TV/VCR, remember the following: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of the TV/VCR ...

  • Magnavox CCZ196AT - page 59

    Helpful Hints (cont’d) 59 The remote control is not available, or the remote control will not access the pop up menu. • Use the buttons on the front panel of the TV/VCR to access the pop up menu (page 22). You can not enter numbers (for example, to program a timer recording) using the front panel buttons. TV/VCR has no power. • Make sure the ...

  • Magnavox CCZ196AT - page 60

    60 Limited Warranty WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product. For 90 days thereafter, all parts will be repaired or replaced, and labor i ...

  • Magnavox CCZ196AT - page 61

    a-b repeat play . . . . . . . .49 - 50 accessories . . . . . . . . . . . . . . .64 ant(enna) jack . . . . . . . . . . .6, 23 audio in jacks . . . . . . . .7, 23, 34 automatic playback . . . . . . . . . . . . . . .53 rewind . . . . . . . . . . . . . . . .53 batteries . . . . . . . . . . . . . . . . . .5 brightness, adjusting . . . . . . . .26 cable/ ...

  • Magnavox CCZ196AT - page 62

    CCZ196comb.QX33 4/6/99 7:05 PM Page 62 ...

  • Magnavox CCZ196AT - page 63

    CCZ196comb.QX33 4/6/99 7:05 PM Page 63 ...

  • Magnavox CCZ196AT - page 64

    IB8046E001 Printed In Mexico 0EMN01367 / B7962UN * * * * * S UPPLIED A CCESSORIES Remote Control (4835 218 37227) Three AA Batteries (4835 138 17012) Check to be sure the items on this page are packed with your TV/VCR. These accessories are provided to help you use or set up your TV/VCR. If any of these items are not included, or if you need to rep ...

Fabbricante Magnavox Categoria TV VCR Combo

I documenti che otteniamo dal fabbricante del dispositivoMagnavox CCZ196AT possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Magnavox
- manuali per l’uso CCZ196AT
- schede prodotto Magnavox
- opuscoli
- o etichette energetiche Magnavox CCZ196AT
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Magnavox CCZ196AT.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Magnavox CCZ196AT, manuali di manutenzione, brevi manuali o manuali utente Magnavox CCZ196AT. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Magnavox CCZ196AT.

Manuali per l’uso simili

Manuale completo del dispositivo Magnavox CCZ196AT, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Magnavox CCZ196AT dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Magnavox CCZ196AT.

Il manuale per l’uso completo Magnavox, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Magnavox CCZ196AT - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Magnavox CCZ196AT, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Magnavox CCZ196AT che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Magnavox CCZ196AT - che ci dovrebbe aiutare nei primi passi durante l'uso Magnavox CCZ196AT
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Magnavox CCZ196AT
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Magnavox CCZ196AT in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Magnavox CCZ196AT?

Utilizza il modulo sottostante

Se non hai risolto il problema con Magnavox CCZ196AT con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Magnavox CCZ196AT è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)