Italiano dropdown-ico

Manuale per l’uso Minolta 5600HS (D)

41 pagine 1.53 mb
Scarica

Vai alla pagina of 41

Summary
  • Minolta 5600HS (D) - page 1

    PROGRAM FLASH MAXXUM FLASH 5600HS ( D ) BASIC OPERA TION APPLICA TIONS APPENDIX E INSTRUCTION MANUAL ...

  • Minolta 5600HS (D) - page 2

    2 3 FOR PROPER AND SAFE USE Read and understand all warnings and cautions before using this product. W ARNING Batteries may become hot or explode due to improper use. • Use only the batteries specified in this instruction manual. • Do not install the batteries with the polarity (+/–) reversed. • Do not subject batteries to fire or high temp ...

  • Minolta 5600HS (D) - page 3

    5 4 CONTENTS Thank you for purchasing the MAXXUM/PROGRAM FLASH 5600HS (D). The MAXXUM/PROGRAM FLASH 5600HS (D) provides the maxi- mum guide number 56, a high-intensity light source, and a wide range of functions in a compact body , and is designed for use with Minolta auto-focus single lens reflex cameras. Please read this manual thoroughly before ...

  • Minolta 5600HS (D) - page 4

    7 6 CAMERAS AND FLASH UNITS This flash unit is designed and manufactured solely for use with the Minolta Maxxum/Dynax series cameras. It cannot be attached to other Minolta cameras. Performance when used with cameras from other manufacturers cannot be guaranteed. Minolta takes no responsibility for accidents or malfunctions due to use with such cam ...

  • Minolta 5600HS (D) - page 5

    9 8 NAMES OF P ARTS Flash Unit Diagram Control Panel Built-in wide angle adapter (25) Flashtube AF illuminator (33) Wireless/Remote control-signal receiver (42) T erminal cap Inside terminal Accessory terminal (55) External-power terminal (72) Mounting-foot-release button (14) Mounting foot Bounce indica- tor (28) Data panel (10) Control panel (9) ...

  • Minolta 5600HS (D) - page 6

    11 10 NAMES OF P ARTS High-speed-sync indicator (38) Flash-range-warning indicators (18) Wireless/Remote controller indicator (48) Flash-ok indicator (17) Wireless/Remote flash indicator (46-54) TTL indicator (36) Manual-flash-control indicator (36) Ratio-flash indicator (50, 53, 56) Multiple-flash indicator (60) Custom indicator (65) Power-level i ...

  • Minolta 5600HS (D) - page 7

    13 12 INST ALLING BA TTERIES The 5600HS (D) may be powered by : • Four AA-size alkaline batteries • Four AA-size lithium batteries • Four AA-size rechargeable nickel-metal hydride (Ni-MH) batteries Always ensure that rechargeable nickel-metal hydride batteries are charged in the specified charger unit. 1. Open the battery-chamber door as show ...

  • Minolta 5600HS (D) - page 8

    Power is supplied to this flash automatically (auto power on) in the following situations. • When the camera is used with the flash attached. • When the flash on/off button is pressed. Power is switched off and data panel indicators disappear automati- cally to save the batteries when the camera or flash is not used for four minutes (auto power ...

  • Minolta 5600HS (D) - page 9

    17 16 P MODE FLASH: THE BASICS 1. Select the P mode on the cam- era. 2. Press the flash ON/OFF button to display or . 3. Press the shutter-release but- ton partway down. • and appear with auto- matic flash. Only appears with fill flash. • With the Maxxum/Dynax 7, automatic flash is used with full-auto, and fill flash when the P mode is selected ...

  • Minolta 5600HS (D) - page 10

    19 18 Flash Range Press the shutter-release button part- way down to display the flash range for the proper exposure on the data panel. Check that the subject is within this range and then take the photo. P MODE FLASH: THE BASICS EXPOSURE MODES A distance range of 1.5~28m may be displayed on the data panel (0.7~28m for downward bounce, see p. 31). ...

  • Minolta 5600HS (D) - page 11

    21 20 M Mode Flash 1. Select the M mode on the camera. 2. Press the flash on/off button to display . • Fill flash is selected. 3. Set the aperture and shutter speed, and focus the sub- ject. • Reduce the aperture (ie increase the f-stop) to reduce the flash range, or open the aperture (ie reduce the f-stop) to increase the flash range. • A sh ...

  • Minolta 5600HS (D) - page 12

    23 22 APPLICA TIONS The section explains the various methods available to make full use of the flash unit. ZOOM FLASH COVERAGE Auto Zoom This flash unit employs auto zoom to cover a range of focal lengths from 24mm to 85mm. There is normally no need to manually adjust zoom coverage. 24mm focal length 85mm focal length • Press the shutter-release ...

  • Minolta 5600HS (D) - page 13

    25 24 Manual Zoom Zoom may be set manually irrespective of the focal length currently in use. Press the ZOOM button to dis- play the desired zoom coverage. • Zoom coverage is changed in the following order . Auto zoom, 24mm, 28mm, 35mm, 50mm, 70mm, 85mm Built-In Wide Angle Adapter (17mm zoom angle) Pull-out the built-in wide-angle adapter for the ...

  • Minolta 5600HS (D) - page 14

    27 26 TEST -FLASH/MODELING FLASH One or more test flashes may be tried before photographing. This is particularly convenient for checking shadows when the flash is sep- arated from the camera such as in wireless flash. * Modeling flash is used to check shadows on the subject before taking pho- tos. 1. Set the test-flash mode selec- tion/hold switch ...

  • Minolta 5600HS (D) - page 15

    29 28 Bounce flash Normal flash Rotate the flash towards the ceil- ing or left and right while press- ing the bounce lock-release but- ton. • The bounce indicator appears on the data panel. Strong shadows appear when flash is used with a wall directly behind the subject. In such cases the flash is directed at the ceiling etc. so that the subject ...

  • Minolta 5600HS (D) - page 16

    31 30 Adjusting Bounce Angle An unsightly photo results when both direct light and bounced light from the flash are used simultaneously . Determine the bounce angle in reference to the distance to the reflective surface, the distance from the camera to the subject, and the focal length of the lens etc. Focal length of lens Bounce angle 70mm minimum ...

  • Minolta 5600HS (D) - page 17

    32 33 Illuminates the data panel at low-light levels. Press the data panel illuminator . • The data panel is illuminated for approximately eight seconds. This period is extended if the flash is used during this time. • T o extinguish the data panel illumina- tor , press the button again while the data panel is illuminated. DA T A P ANEL ILLUMIN ...

  • Minolta 5600HS (D) - page 18

    35 34 MODE AND SELECT BUTTONS The mode, select, +, and - buttons are used to select the functions described on the next page. The functions are selected with the following basic procedure. See the relevant pages for details. 1. Select the major item with the mode button. 2. Select the minor item with the select button. 3. Make the setting with the ...

  • Minolta 5600HS (D) - page 19

    37 36 MANUAL FLASH (M) Normal TTL flash metering automati- cally adjusts the flash intensity to pro- vide the proper exposure for the sub- ject. Manual flash provides a fixed flash intensity irrespective of the brightness of the subject and the camera setting. • Manual flash operates in the camera’s M (manual) mode only . TTL measuring is selec ...

  • Minolta 5600HS (D) - page 20

    39 38 HIGH-SPEED SYNC (HSS) High-speed sync Normal flash 1. Press the mode button to dis- play or on the data panel. 2. Press the select button to blink [HSS]. • The currently selected high-speed sync setting ( / ) also blinks simultaneously . High-speed sync eliminates the restrictions of flash sync speed, and allows you to use flash over the en ...

  • Minolta 5600HS (D) - page 21

    41 40 Photographs taken with the flash attached to the camera are flat as shown in photo . In such cases, remove the flash from the camera and position it to obtain a more three- dimensional effect as shown in photo . Photo was taken using the cam- era’s built-in flash and the flash locat- ed separately from the camera, with a light intensity of ...

  • Minolta 5600HS (D) - page 22

    43 42 WIRELESS/REMOTE FLASH MODE [3] Using the Wireless Remote Flash Controller (p. 52). The following two modes are avail- able. • Use off-camera flash units (photo , p. 40). • Use two off-camera flash units to pro- vide a light intensity ratio of 1:2 or 2:1. Usable cameras and flash units: • Maxxum/Dynax 9, 7, 800si, 700si, or 600si. • A ...

  • Minolta 5600HS (D) - page 23

    45 44 WIRELESS/REMOTE FLASH MODE Notes On Wireless Flash • The MS-2 mini-stand is useful when the flash unit is off the camera. The mini-stand has a tripod configuration with a threaded hole to attach the flash unit. Attach Remove • Pre-flash fires when wireless/remote flash mode is selected. A flash meter and color meter cannot be used. • T ...

  • Minolta 5600HS (D) - page 24

    47 46 WIRELESS/REMOTE FLASH MODE 6. Use test flash to check the 5600HS (D) flash. • The method used for test flash differs with the camera used (eg. press the AE lock button, or spot AE lock button). See the camera manual for details. • If the test flash doesn’t fire, change the position of the camera, flash, and subject, or point the wireles ...

  • Minolta 5600HS (D) - page 25

    49 48 5. Press the select button repeatedly until blinking stops. 6. Attach the 5600HS (D) to the camera. WIRELESS/REMOTE FLASH MODE • The 5400HS or 5400xi may be used as the controller . See the flash unit manual if using the 5400HS. Display [W .L - C.1] if using the 5400xi. Setting Up The Off-Camera Flash (The following applies when the 5600HS ...

  • Minolta 5600HS (D) - page 26

    51 50 3. Press the + or – button to select . 4. Press the select button. 5. Attach the 5600HS (D) to the camera. WIRELESS/REMOTE FLASH MODE Setting Up The Off-Camera Flash Set up the off-camera flash as described on page 49. Manual flash cannot be used. T aking Photos The same method is used as for photography without ratio-flash control (p. 50). ...

  • Minolta 5600HS (D) - page 27

    1. Set up the 5600HS (D) with the off-camera flash as described in 1~4 on page 52~53. 53 52 3. Press the select button repeatedly to blink [WL]. 4. Press the + or – button to blink [WL On]. 5. Press the select button repeatedly until blinking stops. T aking Photos Refer to the Wireless Remote Flash Controller manual. • Set shutter speed to 1/60 ...

  • Minolta 5600HS (D) - page 28

    55 54 3. Press the + or – button to select for one flash, and for another . • The flash set to provides 1/3 of the whole light intensity . flash provides 2/3 of the whole intensity . • Do not set both flashes to the same ratio. Proper exposure may not be obtained. 4. Press the select button. Using with 3600HS (D) or 3500xi Set up the 5600HS ( ...

  • Minolta 5600HS (D) - page 29

    57 56 6. Press the select button repeatedly until blinking stops. 7. T ake the photo. CONNECTING CAMERA AND FLASH BY CABLE Flash-Ratio Control (varying the intensity of individual flash) When using two or more flash units, it is possible to provide a flash intensity of 1 and 2 (or 2 and 1) respectively . • Ratio control is not possible with B gro ...

  • Minolta 5600HS (D) - page 30

    59 58 • When the power level is changed, the distance displayed on the data panel changes accordingly . • Power level settings can be set independently for TTL photography , manual flash photography , and multiple photography . When switching between these, the flash will remember your setting for each individual mode. • In TTL flash photogra ...

  • Minolta 5600HS (D) - page 31

    61 60 4. Press the + or – button to select the flash frequency . • The flash frequency may be selected from the following. 100, 50, 40, 30, 20, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1 • Press and hold the + or - buttons to change the value rapidly . 5. Press the select button to blink [TIMES]. • The current number of flashes for multiple flash is dis ...

  • Minolta 5600HS (D) - page 32

    63 62 • T o prevent shaking, the use of a tripod is recommended during multi- ple flash photography . • T est flash will fire at the selected frequency/number/level while the test-flash button is being pressed if the selection switch is at or HOLD. • The use of custom settings allows the camera to be set up for manual flash photography withou ...

  • Minolta 5600HS (D) - page 33

    65 CUSTOM FUNCTION RESET TO DEF AUL T SETTINGS The various flash settings may be changed as necessary . The fol- lowing five items may be changed. • Wireless channel setting (channels 1~4) • Flash range units (m/ft) • T ime to auto power off (4 minutes, 15 minutes, 60 minutes, none) • T ime to auto power off when using wireless (60 minutes, ...

  • Minolta 5600HS (D) - page 34

    67 66 3. Press the mode button. • The data panel returns to the original display . • When the setting other than the default setting is selected in custom 3, 4 or 5, remains on the data display . • After changing the wireless flash channel (see 1. Wireless channel setting), fit the flash to the camera, and press the shutter-release but- ton p ...

  • Minolta 5600HS (D) - page 35

    69 68 USE IN COMBINA TION WITH OTHER PRODUCTS Read this manual in combination with the relevant manual when any of the following products are used in combination with the 5600HS (D). Using xi Series Single Lens Reflex Cameras (Maxxum/Dynax 9xi, 7xi, 5xi, 3xi, SPxi, 2xi) • Flash is automatic in the P mode with the 9xi, 7xi, 5xi and 3xi. Fill flash ...

  • Minolta 5600HS (D) - page 36

    71 70 Using Minolta Digital Cameras (Dimâge RD3000, Digital camera RD-175) • Flash is automatic in the P mode. Fill flash is used when a photo is taken while the manual fill-flash button on the camera is pressed. • The shutter speed is set automatically in the S mode. • High-speed sync cannot be used. • As the RD3000 has no built-in flash, ...

  • Minolta 5600HS (D) - page 37

    73 72 Bounce Reflector V Set This reflector is attached to the 5600HS (D) flash for simple bounce illumination photography outdoors, and indoors where no reflective sur- faces are available. The unit folds easily for convenient carrying. • The flash range is not displayed on the data panel. High-speed sync is also cleared. • If you already have ...

  • Minolta 5600HS (D) - page 38

    75 74 T emperature • The flash unit may be used over a temperature range of –20°C to 50°C. • Do not leave the flash unit exposed extremely high temperatures (eg. direct sunlight inside motor vehicles), or in conditions of high humidity . • The response of the data panel becomes slower as temperature decreases, and it becomes darker at hig ...

  • Minolta 5600HS (D) - page 39

    77 76 Flash coverage T op-bottom (° ) Left-right (° ) 17 24 28 35 50 70 85 1 1 5 6 05 34 53 42 62 3 125 78 70 60 46 36 31 Flash Coverage Setting (mm) Flash coverage Continuous flash perfor- mance AF illuminator Flash control Size Weight 40 continuous cycles of 5 flashes per second (Normal flash, power level 1/32, nickel-metal hydride battery) Aut ...

  • Minolta 5600HS (D) - page 40

    79 78 MEMO ...

  • Minolta 5600HS (D) - page 41

    Minolta Co., Ltd. 3-13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541-8556, Japan Minolta Europe GmbH Minoltaring 1 1, D-30855 Langenhagen, Germany Reparatur/Repair Senator-Helmken-Strasse 1, D-28197 Bremen, Germany Minolta France S.A. 365 Route de Saint-Germain, F-78420 Carrieres-Sur-Seine, France Minolta (UK) Limited 7 T anners Drive, Blakelands, Mil ...

Fabbricante Minolta Categoria Camera Flash

I documenti che otteniamo dal fabbricante del dispositivoMinolta 5600HS (D) possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Minolta
- manuali per l’uso 5600HS (D)
- schede prodotto Minolta
- opuscoli
- o etichette energetiche Minolta 5600HS (D)
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Minolta 5600HS (D).

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Minolta 5600HS (D), manuali di manutenzione, brevi manuali o manuali utente Minolta 5600HS (D). A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Minolta 5600HS (D).

Manuali per l’uso simili

Manuale completo del dispositivo Minolta 5600HS (D), come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Minolta 5600HS (D) dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Minolta 5600HS (D).

Il manuale per l’uso completo Minolta, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Minolta 5600HS (D) - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Minolta 5600HS (D), FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Minolta 5600HS (D) che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Minolta 5600HS (D) - che ci dovrebbe aiutare nei primi passi durante l'uso Minolta 5600HS (D)
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Minolta 5600HS (D)
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Minolta 5600HS (D) in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Minolta 5600HS (D)?

Utilizza il modulo sottostante

Se non hai risolto il problema con Minolta 5600HS (D) con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Minolta 5600HS (D) è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)