Italiano dropdown-ico

Manuale per l’uso Kenwood KDC-8023

42 pagine 0.84 mb
Scarica

Vai alla pagina of 42

Summary
  • Kenwood KDC-8023 - page 1

    KDC-8023 © B64-2463-00/01 (MV) CD-RECEIVER INSTR UCTION MANU AL COMPACT DIGITAL AUDIO KDC-8023(M) Cover_r2 03.1.8 3:44 PM Page 1 ...

  • Kenwood KDC-8023 - page 2

    — 2 — English Contents Safety precautions.............................3 About CDs ..........................................5 About GSM Hand Free Unit ...............5 Notes on Multi-function Key System .....................................6 General features ................................7 Power Selecting the Source V olume Attenuator System ...

  • Kenwood KDC-8023 - page 3

    — 3 — Safety precautions To prevent injury or fire, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery , or ground wires, make sure to use automotive- grade wires or other wires with a 0.75mm 2 (A WG18) or ...

  • Kenwood KDC-8023 - page 4

    — 4 — English Safety precautions • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed. If the unit still fails to operate properly after the Reset button has been pressed, contact ...

  • Kenwood KDC-8023 - page 5

    — 5 — About CDs Handling CDs • Don’t touch the recording surface of the CD. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. Also, don’t use a CD with tape stuck on it. When using a new CD If the CD center hole o ...

  • Kenwood KDC-8023 - page 6

    — 6 — English Notes on Multi-function Key System Multi-function Key System serves to control various functions with the [2] — [5] buttons. The basic operation of the Multi-function Key System is described below . What's the Multi-function Key System? This unit is equipped with the Multi-function Key System that enables the operation of m ...

  • Kenwood KDC-8023 - page 7

    Press the [SRC] button. Source required Display T uner "TUNER" CD "CD" TV (Optional accessory) "TV" External disc (Optional accessory) "DISC CH" Auxiliary input (Optional accessory) "AUX1" Internal Auxiliary input "AUX" Standby (Illumination only mode) "ALL OFF" Selecting the Sou ...

  • Kenwood KDC-8023 - page 8

    1 Select the source for adjustment Press the [SRC] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "AUD" is displayed above the [2] button. Refer to <Notes on Multi-function Key System> (page 6). 3 Enter Audio Control mode Press the [2] ("AUD") button. 4 Select the Adjus ...

  • Kenwood KDC-8023 - page 9

    [3] button Adjustment Item Display Range Middle level "Middle" –8 — +8 [4] button Adjustment Item Display Range Tr eble level "T reble" –8 — +8 [5] button Adjustment Item Display Range Balance "Balance" Left 15 — Right 15 Fader "Fader" Rear 15 — Front 15 1st section [2] button Adjustment Item Disp ...

  • Kenwood KDC-8023 - page 10

    Switching the display mode. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [3] button. Refer to <Notes on Multi-function Key System> (page 6). Display Mode Switching Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Sta ...

  • Kenwood KDC-8023 - page 11

    2 Enter display control mode Press the [3] ("DISP") button. 3 Select the display mode Press the [2] ("MODE") button. Each time the button is pressed the display mode switches as shown below . Display Display Mode "Display C" Demonstration. "Display A" Normal display type "Display B" Silent display t ...

  • Kenwood KDC-8023 - page 12

    In Standby Information Display "ALL OFF" Clock "Clock" 4 Exit Display Control mode Press the [RTN] button. If the Disc title or T rack title is selected when the disc which does not have disc title or track title is played, track number and play time are displayed. Switching the text display . 1 Select the key function section P ...

  • Kenwood KDC-8023 - page 13

    7 Exit name set mode Press the [NAME.S] button. • When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. • Memory numbers - FM: 32 stations - AM: 16 stations - Internal CD player: 30 discs - External CD changer/ player: V aries according to the CD changer/ player . Refer to the CD changer/ player manu ...

  • Kenwood KDC-8023 - page 14

    Setting the angle or back-forward position of the control panel. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "PNL" is displayed above the [4] button. 2 Enter Panel Position Setting mode Press the [4] ("PNL") button. 3 Select the item for adjustment Press the desired [2] — [5] bu ...

  • Kenwood KDC-8023 - page 15

    Prevents tampering with the unit while your car is being serviced etc. Hiding the control panel Press the [SRC] button for at least 1 second. When the time set in <OFF Wait T ime Setting> (page 30) lapses, the panel is hidden and the power turns OFF . Showing the control panel Press the left part at the lower side of the panel. The panel is o ...

  • Kenwood KDC-8023 - page 16

    5 Exit the Dual Zone System Control mode Press the [RTN] button. 6 Select the source Press the [SRC] button. Select the source sound to be output from the internal source channel. • The Dual Zone System can be used with the sources shown below . - Internal auxiliary input - KCA-S210A - CA-C1AX - External disc changer/ player • While Dual Zone S ...

  • Kenwood KDC-8023 - page 17

    Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display . 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 T une up or down band Press the [ 4 ] or [ ¢ ] button. During reception of stereo stations the "ST& ...

  • Kenwood KDC-8023 - page 18

    Changing the tuning frequency step. Frequency Step Setting Calling up the stations in the memory . 1 Select the band Press the [FM] or [AM] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until the function item is not displayed above the [2] — [5] button. Refer to <Notes on Multi-function Key Sys ...

  • Kenwood KDC-8023 - page 19

    2 Select the key function section Press the [NEXT] button. Repeatedly press the button until the function item is not displayed above the [2] — [5] button. Refer to <Notes on Multi-function Key System> (page 6). 3 Call up the TV channel Press the desired [1] — [6] button. Calling up the TV channels in the memory . 1 Select the TV band Pre ...

  • Kenwood KDC-8023 - page 20

    When there is no disc inserted 1 Open the panel to insert disc Press the [ 0 ] button. 2 Insert a disc. When the faceplate has been slid open, it might interfere with the shift lever or something else. If this happens, pay attention to safety and move the shift lever or take an appropriate action, then operate the unit. • The sound will be tempor ...

  • Kenwood KDC-8023 - page 21

    Doing T rack Search by entering the track number . 1 Enter the track number Press the number buttons on the remote. 2 Do T rack Search Press the [ 4 ] or [ ¢ ] button. Canceling Direct T rack Search Press the [ 38 ] button. Direct T rack Search (Function of remote) Selecting the disc you want to hear . Press the [DISC–] or [DISC+] button. Disc S ...

  • Kenwood KDC-8023 - page 22

    Play all the songs on the disc folder in random order . 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "RDM" is displayed above the [3] button. 2 Tu rn ON/OFF the Random Play Press the [3] ("RDM") button. Each time the button is pressed Random Play turns ON or OFF . When it's ON ...

  • Kenwood KDC-8023 - page 23

    Play the songs on all the discs in the disc changer in random order . 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "MRDM" is displayed above the [5] button. 2 Tu rning ON/OFF the Magazine Random Play Press the [5] ("MRDM") button. Each time the button is pressed the Magazine Random ...

  • Kenwood KDC-8023 - page 24

    Received calls can be answered when a GSM Hands Free Unit (optional accessory) is connected to this unit. 1 When a Call is Received "HF CALL" will be displayed. 2 Accept a call Press the [1], [3] — [6] or [NEXT] button. Switching between the Name and T elephone Number Press the [AUTO] button. Each time the button is pressed the display ...

  • Kenwood KDC-8023 - page 25

    — 25 — Inputting the telephone number with number buttons on the remote, and dialing. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "H-F" is displayed above the [2] button. Refer to <Notes on Multi-function Key System> (page 6). 2 Enter Hands Free mode Press the [2] ("H-F" ...

  • Kenwood KDC-8023 - page 26

    Synchronizing the data in this unit with the data in the GSM telephone. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "SYNC" is displayed above the [3] button. Refer to <Notes on Multi-function Key System> (page 6). 2 Synchronize the data Press the [3] ("SYNC") button. The &qu ...

  • Kenwood KDC-8023 - page 27

    — 27 — Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Press the [FM] ...

  • Kenwood KDC-8023 - page 28

    Selecting the speaker to output the Phone voice. Display Setting "HFSP ALL" Phone voice sent to the front and rear speaker . "HFSP FR" Phone voice send to the front right speaker . "HFSP FL" Phone voice sent to the front left speaker . Phone voice speaker setting <In Standby mode> <When hands free unit connect ...

  • Kenwood KDC-8023 - page 29

    — 29 — A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display Setting "DSI ON" LED flashes. "DSI OFF" LED OFF . DSI (Disabled System Indicator) 1 Select Clock Adjustment mode Press the [FM] or [AM] button. Select the "Clock Adjust" display . 2 Enter Clock Adjust mo ...

  • Kenwood KDC-8023 - page 30

    Switching the preout between the rear and non-fading. (In non- fading it outputs without effect from the fader control.) Display Setting "SWPRE Rear" Rear preout. "SWPRE N-Fad" Non-fading preout. Switching preout <In Standby mode> This function sets the opening and closing operation of a panel when a disc is inserted and w ...

  • Kenwood KDC-8023 - page 31

    — 31 — Set the Built-in Auxiliary Input function. Display Setting "AUX OFF" When selecting the source there's no Auxiliary Input. "AUX ON" When selecting the source there's Auxiliary Input. Built-in Auxiliary input Setting Setting the displayed text scroll. Display Setting "Scroll Auto" Repeats scroll. &q ...

  • Kenwood KDC-8023 - page 32

    — 32 — English [VOL.] buttons Adjusting the volume. [SRC] button Each time the button is pressed the source switches. For the source switching order refer to <Selecting the Source> (page 7). [A TT] button Tu rning the volume down quickly . When it is pressed again it returns to the previous level. Basic operations Use one lithium battery ...

  • Kenwood KDC-8023 - page 33

    — 33 — [ 4 ]/ [ ¢ ] buttons Switching the display . [FM]/ [AM] buttons Switching the initials and messages. [0] — [9]/ [+]/ [#]/ [ * ] buttons When in <Direct Dial> (page 25), enter the telephone number . [] button Entering and switching the Hands Free mode. Press the button for at least one second to dial a phone number or to hang up. ...

  • Kenwood KDC-8023 - page 34

    English — 34 — .........2 Do not use any accessories other than those provided with your unit. If you use other accessories, you may damage the unit. 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - battery . 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wires of ...

  • Kenwood KDC-8023 - page 35

    ANT.CONT. ILLUMI EXT.CONT. P.CONT + + + + – + FRONT REAR AUX IN NON FADINFG FM/AM antenna input 15 Fuse (10A) 27 Wiring harness (Accessory 1 ) 22 28 White/Black 31 Gray/Black 34 Green/Black 37 Purple/Black White 30 Gray 33 Green 36 Purple 39 To front left speaker 29 To front right speaker 32 To rear right speaker 38 To rear left speaker 35 Igniti ...

  • Kenwood KDC-8023 - page 36

    Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Metal mounting strap (commercially available) Phillips truss head sheet metal screw (commercially available) Firewal ...

  • Kenwood KDC-8023 - page 37

    — 37 — Removing the Unit Installation (Japanese-cars) Catch Lock Accessory 2 Removal tool ■ Removing the hard rubber frame 2 When the upper level is removed, remove the lower two locations. The frame can be removed from the bottom side in the same manner . 1 Engage the catch pins on the removal tool and remove the two locks on the upper level ...

  • Kenwood KDC-8023 - page 38

    3 Reattach the Backpanel. Never insert the panel lock screws (M2 X 1.5 mm) in any other screw holes than the one specified. If you insert them in another hole, it will contract and may cause damage to the mechanical parts inside the unit. 1 Refer to the Removing the Backpanel function of the section on <Theft Deterrent Panel> (page 15) and re ...

  • Kenwood KDC-8023 - page 39

    — 39 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON. 01 ✔ The fuse has blown. ☞ After checking for short circuits in the wires, replace the fuse with one with the ...

  • Kenwood KDC-8023 - page 40

    English — 40 — Tr oubleshooting Guide A CD ejects as soon as it is loaded. 62 ✔ The CD is quite dirty . 63 ☞ Clean the CD, referring to the CD cleaning of the section on <About CDs> (page 5). ? Can’ t remove disc. 64 ✔ The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF . ☞ The disc can ...

  • Kenwood KDC-8023 - page 41

    — 41 — Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. E0d ➪ Cool down the unit by opening the windows or turning on the air conditioner . As the temperature falls below 60°C (140°F), the disc will start playing again. NO NAME: At ...

  • Kenwood KDC-8023 - page 42

    English — 42 — Specifications FM tuner section Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz (200 kHz space) ............87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30dB) .................. 9.3dBf (0.8 µV /75 Ω ) Quieting Sensitivity (S/N = 50dB) ............. 15.2dBf (1.6 µV /75 Ω ) Frequency response ( ± 3 dB ...

Fabbricante Kenwood Categoria Car Stereo System

I documenti che otteniamo dal fabbricante del dispositivoKenwood KDC-8023 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Kenwood
- manuali per l’uso KDC-8023
- schede prodotto Kenwood
- opuscoli
- o etichette energetiche Kenwood KDC-8023
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Kenwood KDC-8023.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Kenwood KDC-8023, manuali di manutenzione, brevi manuali o manuali utente Kenwood KDC-8023. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Kenwood KDC-8023.

Manuali per l’uso simili

Manuale completo del dispositivo Kenwood KDC-8023, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Kenwood KDC-8023 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Kenwood KDC-8023.

Il manuale per l’uso completo Kenwood, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Kenwood KDC-8023 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Kenwood KDC-8023, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Kenwood KDC-8023 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Kenwood KDC-8023 - che ci dovrebbe aiutare nei primi passi durante l'uso Kenwood KDC-8023
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Kenwood KDC-8023
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Kenwood KDC-8023 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Kenwood KDC-8023?

Utilizza il modulo sottostante

Se non hai risolto il problema con Kenwood KDC-8023 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Kenwood KDC-8023 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)