Italiano dropdown-ico

Manuale per l’uso Hobart HR7E

40 pagine 1.06 mb
Scarica

Vai alla pagina of 40

Summary
  • Hobart HR7E - page 1

    HR7E ROTARY OVEN N S T R U C T I O N S I 701 S. RIDGE A VENUE TROY , OHIO 45374-0001 937 332-3000 www .hobartcorp.com FORM 35511 (Feb. 2006) MODEL HR5E & HR7E ROT AR Y OVENS MODEL HR7E STAINLESS STEEL INTERIOR, GLASS BACK ML-132092 STAINLESS STEEL INTERIOR, SOLID BACK ML-132095 COATED INTERIOR, GLASS BACK ML-132093 COATED INTERIOR, SOLID BACK M ...

  • Hobart HR7E - page 2

    – 2 – © HOBART 2006 T ABLE OF CONTENT GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Location . . . . . . . . . . . . . . . . . . . . . . . ...

  • Hobart HR7E - page 3

    – 3 – Installation, Operation and Care of MODEL HR5E & HR7E ROT AR Y OVENS SA VE THIS MANUAL FOR FUTURE REFERENCE GENERAL The HR5E and HR7E Ovens are five-spit and seven-spit rotary ovens that feature a full view tempered glass door and quartz lighting that promote visual appeal and stimulate customer interest. The solid back model (HR7E on ...

  • Hobart HR7E - page 4

    – 4 – ELECTRICAL CONNECTIONS WARNING : ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND / OR OTHER LOCAL ELECTRICAL CODES. WARNING : DISCONNECT ELECTRICAL POWER SUPPLY TO THE MACHINE AND FOLLOW LOCKOUT / TAGOUT PROCEDURES. Single Oven Access the electrical connection point by remo ...

  • Hobart HR7E - page 5

    – 5 – ELECTRICAL DATA HR5E HR5E / HR5E * VOLTAGE HZ PHASE AMPERAGE WATTAGE AMPERAGE 208(2W) 50/60 1 26.9 6000 53.8 240(2W) 50/60 1 25.0 6000 50.0 208(3W) 50/60 3 15.5 6000 31.0 240(3W) 50/60 3 14.4 6000 28.8 220/380(4W) 50/60 3 8.4 6000 16.8 230/400(4W) 50/60 3 8.7 6000 17.4 240/415(4W) 50/60 3 9.0 6000 18.0 Full load Amperage is measured at re ...

  • Hobart HR7E - page 6

    – 6 – PLACING THE ROTOR IN THE OVEN (HR5E) The rotor must properly engage with the drive mechanism. Orient the rotor so that the end plate with the drive pin is aligned with the slotted drive hub. STEP 1: Place the drive end of the rotor shaft into the slotted drive hub (Fig. 1). STEP 2: Place the rotor shaft on the support bearing on the non-d ...

  • Hobart HR7E - page 7

    – 7 – PLACING THE ROTOR IN THE OVEN (HR7E) The rotor must properly engage with the drive mechanism. Orient the rotor so that the end plate with square drive slots is on the same side of the oven as the drive arm. STEP 1: Stop the drive arm so it is in the down position (Fig. 3). Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 8 Fig. 7 STEP 3: Place the drive ...

  • Hobart HR7E - page 8

    – 8 – OPERA TION WARNING : HOT GLASS, GREASE AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING AND SERVICING THE OVEN. CONTROLS (Fig. 9) MAIN POWER SWITCH — Turns oven and controls on or off. PROGRAM — Enters program mode to modify a cook program; press P for 3 seconds. CLOCK — Sets the clock for time of day. PROBE — Displays temperatu ...

  • Hobart HR7E - page 9

    – 9 – INITIAL STARTUP Power On Toggle the Main Power switch on the front panel of the oven to the ON position; the red indicator light on the switch comes on (Fig. 9). Idle Mode When the oven is first turned on, the display shows the time of day and the last operated program number. Any programmed steps for the selected program are indicated by ...

  • Hobart HR7E - page 10

    – 10 – SAVING OR VERIFYING A COOK PROGRAM (PROGRAM 1 – 9) Begin from Idle Mode. Program display shows last operated program (0 – 9). • Select a program (1 – 9). Program 0 is Manual Mode and cannot be saved into memory. • Press P for 3 seconds to enter programming mode. The program display shows the program/number being modified or ver ...

  • Hobart HR7E - page 11

    – 11 – Cooking 'Step 3' LED is lit. Time display blinks. • Enter the desired cook time from 0:01 (1 minute) to 6:00 (6 hours). • Press ENTER to accept (or, press CLEAR to void and reenter). An invalid entry produces a double beep. Entering 0:00 for the time turns step 3 off and skips to step 4. Temperature display blinks. • Ente ...

  • Hobart HR7E - page 12

    – 12 – PROGRAMMED COOKING (Program 1 – 9) Begin from Idle Mode. The Program display shows the last operated program (0 – 9). • Select a saved cook program (1 – 9). Any programmed steps for the selected program are indicated by lit step LEDs. • Press START to run a preprogrammed cook cycle. While running a cooking program . . . The con ...

  • Hobart HR7E - page 13

    – 13 – MANUAL COOKING (Program 0) Begin from Idle Mode. The Program display shows the last operated program (0 – 9). • Select manual mode by selecting program 0: [0, ENTER]. Cook Step 1 LED is lit. Time display blinks. • Enter the desired cook time from 0:01 (1 minute) to 6:00 (6 hours). • Press ENTER to accept (or, press CLEAR to void ...

  • Hobart HR7E - page 14

    – 14 – HOLDING CYCLE (SILENCING THE 'END OF CYCLE' ALARM) After a cook cycle has been completed, the beeper sounds and the oven automatically executes the Hold cycle (Step 4 of the cooking program). The Hold cycle will not execute if it was programmed 'off', using Hold Temp = 000. • Press to silence the beeper. • Program ...

  • Hobart HR7E - page 15

    – 15 – ADDING COOK TIME • Press ADD 5 MIN during a cooking cycle to add 5 minutes of cook time to the current step of the program in process. Press during the end of cycle buzzer or during Hold cycle to add 5 minutes of cook time to the last step of the last operated program. Press multiple times to add as much as desired up to a maximum tota ...

  • Hobart HR7E - page 16

    – 16 – SUGGESTED ROASTING GUIDELINES The suggested cooking times and temperatures in the table may require adjustment for proper doneness depending on initial product temperature, weight, size, shape and other factors. STEP 1 STEP 2 STEP 3 STEP 4 TEMPERATURE TIME PROGRAM # STEP 1 STEP 2 STEP 3 STEP 4 TEMPERATURE TIME STEP 1 STEP 2 STEP 3 STEP 4 ...

  • Hobart HR7E - page 17

    – 17 – STEP 1 STEP 2 STEP 3 STEP 4 TEMPERATURE TIME STEP 1 STEP 2 STEP 3 STEP 4 TEMPERATURE TIME STEP 1 STEP 2 STEP 3 STEP 4 TEMPERATURE TIME STEP 1 STEP 2 STEP 3 STEP 4 TEMPERATURE TIME STEP 1 STEP 2 STEP 3 STEP 4 TEMPERATURE TIME STEP 1 STEP 2 STEP 3 STEP 4 TEMPERATURE TIME STEP 1 STEP 2 STEP 3 STEP 4 TEMPERATURE TIME STEP 1 STEP 2 STEP 3 STE ...

  • Hobart HR7E - page 18

    – 18 – Bring chickens from cooler. Check temperature — range should be from 37 ° F to 42 ° F. Insert approved popper, if available; it will pop out when chicken is done.  PREPARING, TYING & SPITTING — CHICKENS ON V-SPITS The rotary oven is not designed to roast frozen foods. Use only fresh or previously thawed product. Using an app ...

  • Hobart HR7E - page 19

    – 19 –  INCORRECT SPITTING — CHICKENS ON V-SPITS WRONG — Angle of spit is in line with breast. This will split the backbone and could possibly result in falling off the spit during cooking. WRONG — Legs and thighs are not on same side as breast. This could cause legs to fall off during cooking. WRONG — Legs are being inserted first. ...

  • Hobart HR7E - page 20

    – 20 – WARNING : SPITS ARE SHARP. USE CARE WHEN LOADING PRODUCT.  SPITTING — CHICKENS ON FORK SPITS (HR5E) Press pointed ends of spits into whole poultry so points go through the chest-wing and leg-thigh regions (Fig.10). Load three or four chickens on each fork spit. Fig. 10  LOADING — CHICKENS ON RACKS (HR5E) Place chicken cavity ov ...

  • Hobart HR7E - page 21

    – 21 – Fig. 15 1 Load 2 Skip 4 Skip 5 Load 6 Skip 7 Load 3 Load WARNING : SPITS ARE SHARP. USE CARE WHEN LOADING PRODUCT.  SPITTING — CHICKENS ON FORK SPITS (HR7E) Press pointed ends of spits into whole poultry so points go through the chest-wing and leg-thigh regions (Fig. 14). Load four or five chickens on each fork spit. Fig. 14  SPI ...

  • Hobart HR7E - page 22

    – 22 –  Loading V-Spits or Thermo-Wave Spits on the Rotor (HR5E) 1. Place pointed end of V-spit into outside hole on drive side of rotor (Fig. 19). 2. Fit notched end of V-spit into appropriate holes on non-drive side of rotor (Fig. 18). 3. Make sure the spit is level. If the spit is not level, you might be using the wrong holes. NON-DRIVE S ...

  • Hobart HR7E - page 23

    – 23 –  Loading V-Spits or Thermo-Wave Spits on the Rotor (HR7E) 1. Place pointed end of V-spit into outside hole on non-drive side of rotor (Fig. 24). 2. Fit notched end of V-spit into appropriate holes on drive side of rotor (Fig. 25). 3. Make sure the spit is level. If the spit is not level, you might be using the wrong holes. NON-DRIVE S ...

  • Hobart HR7E - page 24

    – 24 – PERSONAL PROTECTIVE EQUIPMENT Chickens and accessories are hot. Use care during unloading by using appropriate personal protective equipment such as 18" insulated gloves, an apron, long sleeved clothing and closed toed shoes. UNLOADING ACCESSORIES FROM OVEN Opening the door does not stop the rotor, heaters or fan. 1. Press STOP to s ...

  • Hobart HR7E - page 25

    – 25 – CLEANING WARNING : DISCONNECT THE ELECTRICAL POWER SUPPLY TO THE MACHINE AN D FOLLOW LOCKOUT / TAGOUT PROCEDURES BEFORE CLEANING OR SERVICING. Proper cleaning prolongs the life and productivity of the oven. The oven should be routinely cleaned throughout the day and thoroughly cleaned at the end of the day. Allow oven to cool before clea ...

  • Hobart HR7E - page 26

    – 26 – CLEANING STAINLESS STEEL SURFACES 1. Wash stainless steel parts with warm soapy water. 2. Rinse parts thoroughly. 3. Dry with a soft clean cloth. CLEANING GUIDELINES FOR NONSTICK COA TED SURF ACES Abrasion and aggressive chemicals reduce the life of the nonstick coating. With proper care, the nonstick coated surface should provide a long ...

  • Hobart HR7E - page 27

    – 27 – CLEANING QUARTZ LAMPS CAUTION: Do not clean the quartz lamps in the top of the oven with soap and water. Be very careful when cleaning lamps. Lamps can be broken by mishandling. • Clean lamps with a cloth soaked in alcohol. • Do Not touch lamps with your bare hands. Touching the quartz lamp could shorten the life of the bulb. CLEANIN ...

  • Hobart HR7E - page 28

    – 28 – WEEKLY CLEANING — HR5E OVENS Clean ceiling of oven interior to remove potential grease build-up. Excessive grease build-up on convection fan blade and / or vent-grate will decrease oven's cooking performance over time. NOTE: For ease of cleaning, replacement fan blade(s) are available from Hobart Service Parts. 1. Open door and re ...

  • Hobart HR7E - page 29

    – 29 – 4 Clean ceiling area around the elements and convection fan (Figs. 39, 40). 5. Wash vent-grate and fan blade in a sink with warm soapy water (Fig. 41). 6. Rinse and allow to dry. 7. After cleaning, reinstall fan blade by mating D-shaped fan onto D-shaped shaft and then tightening center nut counterclockwise (Fig. 42). 8. Reinstall vent-g ...

  • Hobart HR7E - page 30

    – 30 – Fig. 46 WEEKLY CLEANING — HR7E OVEN WITH REAR GLASS DOOR, ACCESS FROM REAR Clean ceiling of oven interior to remove potential grease build-up. Excessive grease build-up on convection fan blade(s) and / or vent-grate will decrease oven's cooking performance over time. NOTE: For ease of cleaning, replacement fan blade(s) are availab ...

  • Hobart HR7E - page 31

    – 31 – Fig. 50 Fig. 51 Fig. 52 Fig. 49 Fig. 48 3. Remove the center nut that secures the element cover using a 7 / 16 " nutdriver (Fig. 47). 4. Allow the element cover to swing down (Figs. 48, 49). 5 . Remove both fan blades. Unscrew the center nut on each fan blade (clockwise, Fig. 50). 6. Clean ceiling of oven interior around elements an ...

  • Hobart HR7E - page 32

    – 32 – 8. Clean the vent-grate and fan blades (Fig. 53). Rinse and allow to dry. 9. After cleaning, reinstall 2 fan blades: Mate D-shaped hole on fan onto D-shaped shaft; then tighten nut (counterclockwise) (Fig. 54). 10. Swing element cover up until all 3 studs protrude through cover. Reinstall element cover: Tighten center nut using a 7 / 16 ...

  • Hobart HR7E - page 33

    – 33 – Fig. 56 11. Working from rear of oven, position high side of vent-grate toward rear of oven, short side faces center of oven (Fig. 56). 12. Reinstall vent-grate: Tighten 7 / 16 " nuts on each side of vent grate using a 7 / 16 " nutdriver (Fig. 57). Fig. 57 THREAD NUTS ON BOTH SIDES HIGH SIDE TOWARD REAR OF OVEN SHORT SIDE TOWAR ...

  • Hobart HR7E - page 34

    – 34 – WEEKLY CLEANING — HR7E OVENS WITH SOLID BACK, ACCESS FROM FRONT Clean ceiling of oven interior to remove potential grease build-up. Excessive grease build-up on convection fan blade(s) and / or vent-grate will decrease oven's cooking performance over time. NOTE: For ease of cleaning, replacement fan blade(s) are available from Hob ...

  • Hobart HR7E - page 35

    – 35 – 3 . Using a 7 / 16 " nutdriver, r e m ove the center nut that secures the element cover (Fig. 61). Allow the element cover to swing down toward you (Fig. 62). 4. Raise element cover up and swing toward front of oven to clear rotor support and rotor arm (Fig. 63). Continue to swing element cover to forwardmost position. Fig. 61 Fig. ...

  • Hobart HR7E - page 36

    – 36 – Fig. 67 5. With element cover in forwardmost position, lift up right side to clear right hinge pin; then lower right side and lift up left corner until left hinge clears left hinge pin (Fig. 64). Fig. 65 CENTER NUT FAN CENTER NUT FAN Fig. 64 6 . Remove two fan blades by unscrewing center nut on fan blades (clockwise, Fig. 65). 8. Clean v ...

  • Hobart HR7E - page 37

    – 37 – 9. After cleaning, reinstall 2 fan blades: Mate D-shaped hole on fan onto D-shaped shaft; then tighten nut (counterclockwise) (Fig. 68). Fig. 68 CENTER NUT FAN CENTER NUT FAN D HOLE 10. Reinstall element cover: Raise left hinge (end of U-chanel) up around left hinge pin (Fig. 69). LEFT HINGE PIN LEFT HINGE Fig. 69 11. Raise right side of ...

  • Hobart HR7E - page 38

    – 38 – Fig. 73 HIGH SIDE TOWARD REAR SHORT SIDE TOWARD CENTER Fig. 71 Fig. 72 12. Swing element cover back and raise up to clear rotor support and rotor arm (Fig. 71). Continue swinging element cover back until mounting studs protrude through three holes in element cover. 13. Reinstall element cover: Tighten 7 / 16 " center nut using 7 / 1 ...

  • Hobart HR7E - page 39

    – 39 – 15. Reinstall vent-grate: Tighten 7 / 16 " nuts on each side of vent grate using a 7 / 16 " nutdriver (Fig. 74). Fig. 74 THREAD NUTS ON BOTH SIDES ...

  • Hobart HR7E - page 40

    – 40 – FORM 35511 (Feb. 2006) PRINTED IN U.S.A. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE 1. Control does not light up. 1. ON-OFF switch is not pressed ON. 2. Electric supply is interrupted; check circuit breaker. 2. Cooking too slow. 1. Fan blade(s) and ventilation area require routine cleaning. SERVICE Contact your local Hobart office. MAINTENAN ...

Fabbricante Hobart Categoria Oven

I documenti che otteniamo dal fabbricante del dispositivoHobart HR7E possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Hobart
- manuali per l’uso HR7E
- schede prodotto Hobart
- opuscoli
- o etichette energetiche Hobart HR7E
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Hobart HR7E.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Hobart HR7E, manuali di manutenzione, brevi manuali o manuali utente Hobart HR7E. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Hobart HR7E.

Manuali per l’uso simili

Manuale completo del dispositivo Hobart HR7E, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Hobart HR7E dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Hobart HR7E.

Il manuale per l’uso completo Hobart, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Hobart HR7E - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Hobart HR7E, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Hobart HR7E che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Hobart HR7E - che ci dovrebbe aiutare nei primi passi durante l'uso Hobart HR7E
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Hobart HR7E
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Hobart HR7E in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Hobart HR7E?

Utilizza il modulo sottostante

Se non hai risolto il problema con Hobart HR7E con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Hobart HR7E è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (1)

Miguel Torres Cauich

NESECITO EL MANUEAL DE OPERACION DEL HR7E