-
Hitachi 8916 - page 1
1 ENGLISH Projector 8755H / 8916 User's Manual (concise) Thank you for purchasing this projector . WARNING ►Before using this product, be sure to read all manuals for this product. See “Using the CD manual” ( 15 ) to read the manuals in the CD. After reading them, store them in a safe place for future reference. Contents of packa ...
-
Hitachi 8916 - page 2
2 Fastening the lens cover T o avoid losin g the lens c over , please fasten the le ns cover to the projector using the enclosed strap. 1. Fix the strap to the strap hole of the lens cover . Thread one end of the strap through the strap hole of the lens cover and make the loop at the end, and let the other end of the strap through the loop. Not hav ...
-
Hitachi 8916 - page 3
3 ENGLISH On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installatio n such as suspending from a ce iling. WARNING ►Install the projector in a stable horizontal position. ► Place the p rojector ...
-
Hitachi 8916 - page 4
4 Connecting your de vices Be sure to read the manuals for devices before connecting them to the projector . Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. WARNING ►Do not disassemble or modify the projector and ...
-
Hitachi 8916 - page 5
5 ENGLISH Connecting pow er suppl y 1. Put the connector of the power cord into the AC inlet of the projector . 2. Firmly plug the power cord’s plug into the outlet. WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in re and/or electrical shock. • Only use the power cord that c ...
-
Hitachi 8916 - page 6
6 Adjusting the projector's eleva tor When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally . Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 10 degrees. This projec ...
-
Hitachi 8916 - page 7
7 ENGLISH Displaying the picture 1. Activate your signal source. T urn the signal source on, and make it send the signal to the projector . 2. Use the VOLUME +/VOLUME - buttons to adjust the volume. T o have the projector silent, press the MUTE button on the remote control. 3. Press the INPUT button on the projector . Each time you press the button ...
-
Hitachi 8916 - page 8
8 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON POSITION 1 2 ESC ENTER MENU RESET COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ON OFF 㧗 FREEZE T ur ning of f the power 1. Press the ST ANDBY/ON button on the projector or the remote control. The message "Power off?" will appear on the screen for about 5 seconds. ...
-
Hitachi 8916 - page 9
9 ENGLISH R eplacing the lamp A lamp has nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. T o prepare a n ...
-
Hitachi 8916 - page 10
10 HIGH VOL T AGE HIG H TEMPE RA TURE HIGH PRESSU RE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In additi ...
-
Hitachi 8916 - page 11
1 1 ENGLISH Please check and clean the air lter periodically . When the indicators or a message prompts you to clean the air lter , comply with it as soon as possible. The air lter has two kinds of lters inside. Replace the lters when they are damaged or too soiled. T o prepare the new lters, contact to your dealer and tell the fo ...
-
Hitachi 8916 - page 12
12 Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User ’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requir ements The system for using the CD-ROM requires the following. Windows®: OS:Microsoft® Windows® 98, 98SE, NT4.0, Me, 20 ...
-
Hitachi 8916 - page 13
13 ENGLISH R e gulator y notices Declaration of Conformity T rade name HIT ACHI Model Number CP-X201/CP-X301/CP-X401/CP-X450 Responsible Party Hitachi America, Ltd. Address 900 Hitachi way , Chula Vista, CA 91914-3556 U.S.A. T elephone Number +1 -800-225-1741 This device complies with part 15 of the FCC Rules. Operation is subject to the following ...
-
Hitachi 8916 - page 14
14 Infor mation f or user s applicable in Eur opean Union countries 1. The manufacturer (Gemtek) hereby declare that this equipment (wireless network card), model SD-Link1 1g is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 2. This symbol on the product or on its packaging means that your electr ...
-
Hitachi 8916 - page 15
15 ENGLISH Specications Item Specications Product name Liquid crystal projector Liquid Crystal Panel Panel size 1.6 cm (0.63 type) Drive system TFT active matrix Pixels 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens 8755H : F=2.3~2.5 f=18.9~22.6 TBD : F=1. 6 ~1. 8 f=18.9~22.6 8916 : F=1.6~1.8 f=18.9~22.6 (approximately) Lamp C ...
-
Hitachi 8916 - page 16
16 War ranty and after-ser vice If an abnormal operation (such as smoke, strange odor or excessive sound) should occur , stop using the projector immediately . Otherwise if a problem occurs with the projector , rst refer to the “T roubleshooting” of the “Operating Guide” in the CD and run through the suggested checks. If this does not re ...
Hai una domanda su Hitachi 8916?
Utilizza il modulo sottostante
Se non hai risolto il problema con Hitachi 8916 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Hitachi 8916 è probabile che voglia condividere il modo di risolverlo.