-
Telular CDMA 2000 1X - page 1
6/13/03 Part Number 56027602 P HONECELL ® SX4P CDMA 2000 1 X Fixed W ir eless Phone U SER M ANU AL ...
-
Telular CDMA 2000 1X - page 2
Phonecell ® SX4P 1x ii User Manual SX4P MENU STRUCTURE SMS Menu Create Message Read Message Delete Message Dat a Mode Speed Dial Save Recall Settings Call Alert V olume Msg Alert V olume V oice Mail Number Call Alert T one Auto Send Delay LCD Contrast Zero-Delay Dial MIN V oice Prv V oice Prv Alert MT Call Bearer * Requires password Menu ...
-
Telular CDMA 2000 1X - page 3
Before installing your Phonecell ® SX4P , carefully remove the content s from the shipping carton and check for evidence of shipping damage. If damage is found, cont act your Authorized T elular Distributor or shipping agent immediately . SAFE OPERA TION INSTRUCTIONS IMPORT ANT! Before installing or operating this product, read the SAFETY INFORMA ...
-
Telular CDMA 2000 1X - page 4
Phonecell ® SX4P 1x iv User Manual T ABLE OF CONTENTS SX4P Menu S tructure ....................................................................................................ii Content s ........................................................................................................................iii Safe Operation Instructions ......... ...
-
Telular CDMA 2000 1X - page 5
Phonecell ® SX4P 1x 1 User Manual SX4P SETUP Emergency Batteries Inst all Batteries 1. Remove the battery access door screw that is located on the bottom of the unit - see Figure 1 . 2. Press the battery access door tab and remove the battery access door . 3. Install 6 “AAA” alkaline batteries (not supplied). 4. Reattach the battery access doo ...
-
Telular CDMA 2000 1X - page 6
Phonecell ® SX4P 1x 2 User Manual Connect the Handset Before the SX4P can be operated, the handset cable must be connected - see Figure 5 . 1. Connect one end of the handset cable to the phone jack. 2. Connect the other end of the handset cable to the handset. W all-Mounting Before you attempt to mount the SX4P on a wall, you will need to purchase ...
-
Telular CDMA 2000 1X - page 7
Connect the SX4P to AC Power 1. Attach the barrel connector of the power supply to the AC power input on the rear panel of the SX4P . 2. Connect the AC power cord to the power supply . 3. Move the AC/Battery switch to the AC position. 4. Plug the AC power cord into the wall socket. The SX4P will power up automatically . 5. Check the cellular streng ...
-
Telular CDMA 2000 1X - page 8
SX4P BASICS Function Keys The keypad includes all digit s 0 through 9 and special characters hash/pound (#) and star/asterisk (*). All data entry and programming activities are performed using the keypad. LCD Screen Icons The SX4P displays icons to indicate signal strength, ringer st atus, new voicemail, monitor phone status, handset st atus, and b ...
-
Telular CDMA 2000 1X - page 9
Phonecell ® SX4P 1x 5 User Manual Service Indication Full Service When it is powered on, the SX4P will display “Initializing” while it sets up, then it will display your phone number followed by the hardware and software versions. If service is available, “T elular SX4 1x” will display when the setup is complete. If the unit is roaming, an ...
-
Telular CDMA 2000 1X - page 10
FEA TURES Use the V oicemail Key (envelope ICON) to navigate up and down the menu tree. Use the Redial Key to cancel an entry . When finished with parameter changes, press the V oicemail Key to pro- gram the changes to the phone. Alternatively , lifting the handset from the cradle and replacing it will also program the changes to the phone. The LCD ...
-
Telular CDMA 2000 1X - page 11
Delete Messages Y ou can delete messages from the Read Messages menu or the Delete Messages menu. The Read Messages menu allows deletion of specific messages while the Delete Messages menu allows deletion of groups of message types. Deleting Messages from the Read Message Menu 1. While reviewing a message, press the FLASH key . 2. Scroll to Delete ...
-
Telular CDMA 2000 1X - page 12
Dat a Features The SX4P allows for 1X p acket data and circuit switched data (CSD) using a PC connected to the data port of the SX4P . Making Dat a Calls T o make any data call from the SX4P , the unit must be in data mode. Only dat a calls can be made when the SX4P is in dat a mode. If you want to make a voice call while in data mode, press the Fl ...
-
Telular CDMA 2000 1X - page 13
Speed Dial Store a Number 1. Press the FLASH key , then select Speed Dial . 2. Select Save . 3. Enter the phone number to be stored, then press the FLASH key . 4. Enter the speed dial location (0-9, *, or #). 5. Press the FLASH key . View the S peed Dial List 1. Press the FLASH key , then select Speed Dial . 2. Select Recall . 3. Use the UP/DOWN ar ...
-
Telular CDMA 2000 1X - page 14
SETTINGS Use the V oicemail Key (envelope ICON) to navigate up and down the menu tree. Use the Redial Key to cancel an entry . When finished with parameter changes, press the V oicemail Key to pro- gram the changes to the phone. Alternatively , lifting the handset from the cradle and replacing it will also program the changes to the phone. The LCD ...
-
Telular CDMA 2000 1X - page 15
1. Press the FLASH key , then select Settings . 2. Select Zero Dial Delay . 3. Enter the desired setting. 0 = Off 1 = On (default) 4. Press the FLASH key . View Phone Number 1 Press the FLASH key , then select Settings . 2. Select MIN . The phone number of the unit will display . V oice Privacy This option allows additional security via encryption ...
-
Telular CDMA 2000 1X - page 16
SX4P TROUBLESHOOTING Unable to Send/Receive Dat a/F AX Calls Check all the connections from the SX4P to other equipment (computer , fax machine, etc.). V erify that necessary settings have been properly configured (see the Data Features section of this manual). If everything is properly connected and configured and you are still unable to send or r ...
-
Telular CDMA 2000 1X - page 17
GENERAL INFORMA TION AND SAFETY T emperature Environment The SX4P functions as both a radio transmitter and receiver . When it is ON, the SX4P receives and sends out radio frequency (RF) energy . The CDMA 800 unit operates in the frequency range between 824 and 894 MHz and the CDMA 1900 unit operates in the frequency range between 1850 and 1910 MHz ...
-
Telular CDMA 2000 1X - page 18
W ARRANTY I. WHA T THIS W ARRANTY COVERS AND FOR HOW LONG: TELULAR CORPORA TION ('T elular") warrants to a distributor Buyer , or to a customer only if the customer is a Buyer directly from T elular , that the Products (including accessories) shall comply with the applicable S pecifications and shall be free from defects in material and w ...
-
Telular CDMA 2000 1X - page 19
IV . WHA T THIS W ARRANTY DOES NOT COVER: (a) Subsequent upgrades and enhancements to the Product. (b) Defect s, non-compliance or damage resulting from use of the Product in other than its normal and customary manner or environment. (c) Defects, noncompliance or damage from misuse, lightening, accident or neg- lect. (d) Defects, noncompliance or d ...
-
Telular CDMA 2000 1X - page 20
APPENDIX A: HOW TO SETUP PC SERIAL PORTS FOR PHONECELL DIGIT AL F AX/DA T A Requirement s · CDMA account with your network service provider including a Data/Fax facility . · PC/Laptop/ Notebook with Com Port. · Windows 95/98 · · RS-232 Cable (DB9 to DB15). NOTE: When all of the above have been satisfied, you may proceed. Modem Setup 1) Connect ...
-
Telular CDMA 2000 1X - page 21
Phonecell ® SX4P 1x 17 User Manual 4) Select ‘S tandard 19200 bps Modem’ and click on ‘Properties’.. 5) Select ‘Communication’ Port (COM1) and Maximum speed of 1 15,200 bps. ...
-
Telular CDMA 2000 1X - page 22
Phonecell ® SX4P 1x 18 User Manual 6) Set ‘Connection Preferences’ so that the data bits is set to 8, parity is NONE and stop bit s are 1 then click ‘Advanced’. 7) Check the box for ‘Use Control Flow’ and then click on ‘Hardware (RTS/CTS) and then select ‘OK’. ...
-
Telular CDMA 2000 1X - page 23
8) Click on ‘OK’ 9) Click on ‘Close’. Phonecell ® SX4P 1x 19 User Manual ...
-
Telular CDMA 2000 1X - page 24
10) Run ‘Dial-up Networking’. Double click the icon ‘Make New Connection’. 1 1) T ype “T elular 1xRTT on the first entry field; select the ‘S tandard 19200 modem’ and click on ‘Next’. Phonecell ® SX4P 1x 20 User Manual ...
-
Telular CDMA 2000 1X - page 25
12) T ype the network provider ’ s phone number (#777) and click on ‘Next’ and then click on ‘Finish’. 13) Right click on the new icon ‘T elular 1xRTT’ and left click on ‘Properties’. Phonecell ® SX4P 1x 21 User Manual ...
-
Telular CDMA 2000 1X - page 26
14) Click on ‘Server T ypes’ (DO NOT check the ‘Use Area Code and Dialing Properties). 15) Check the ‘TCP/IP’ box and click on ‘TCP/IP Settings’. Phonecell ® SX4P 1x 22 User Manual ...
-
Telular CDMA 2000 1X - page 27
16) Now select ‘Server assigned IP address’ as well as ‘Server assigned name server address’ in addition you need to check both boxes ‘Use IP header compression’ and ‘Use default gateway on remote network’. Then click on ‘OK’. 17) T o connect to the Internet you will need to double click on the new profile just created called (T ...
-
Telular CDMA 2000 1X - page 28
647 North Lakeview Parkway V ernon Hills, Illinois 60061, USA T el: 847-247-9400 • Fax: 847-247-0021 E-mail: support@telular .com http://www .telular .com ©2003 T elular Corporation, all rights reserved. Part Number 56027602 ...
Hai una domanda su Telular CDMA 2000 1X?
Utilizza il modulo sottostante
Se non hai risolto il problema con Telular CDMA 2000 1X con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Telular CDMA 2000 1X è probabile che voglia condividere il modo di risolverlo.