Italiano dropdown-ico

Manuale per l’uso Husqvarna 16 H

44 pagine 2.05 mb
Scarica

Vai alla pagina of 44

Summary
  • Husqvarna 16 H - page 1

    101 90 89-95 Ri d e r 1 6 H Operator´ s manual Please read these instructions carefully and make sure you understand them before using the machine. ...

  • Husqvarna 16 H - page 2

    Svenska – 31 Sve-5 225/232/235 Bruk 97-11-25, 08.46 31 ...

  • Husqvarna 16 H - page 3

    English – 1 Explanation of symbols ...................................... 2 Safety instructions .............................................. 3 General operation ............................................ 3 Slope operation ................................................ 3 Children ............................................................ 3 ...

  • Husqvarna 16 H - page 4

    2 – English These symbols are on the machine and in the operator ’s manual. Study them carefully so that you know what they mean. Read the operator ’s manual Reverse Neutral Fast Slow Engine off Battery Choke Fuel Oil pressure Cutting height Backwards Forwards Ignition Hydrostatic free wheel Use eye and hearing protection Parking brake Brake ...

  • Husqvarna 16 H - page 5

    English – 3 These instructions are for your safety . Read them carefully . SAFETY INSTRUCTIONS 1. Safety rules for USA Safe operation practices for ride-on mowers IMPORT ANT! This cutting machine is capable of amputating hands and feet and throwing objects. Failure to ob- serve the following safety instructions could result in serious injury or d ...

  • Husqvarna 16 H - page 6

    4 – English SAFETY INSTRUCTIONS IV . Service 1. Use extra care in handling gasoline and other fuels. They are flammable and vapours are explosive. a) Use only an approved container . b) Never remove gas cap or add fuel with the engine running. Allow engine to cool before refuelling. Do not smoke. c) Never refuel the machine indoors. d) Never stor ...

  • Husqvarna 16 H - page 7

    English – 5 Read the instructions befor e starting the machine. Clear the ar ea fr om stones etc. befor e cutting. Never carry passengers. These instructions are for your safety . Read them carefully . General use: • Make yourself familiar with the controls and how to stop quickly . • Read all the instructions in Operator ’s Manual and on t ...

  • Husqvarna 16 H - page 8

    6 – English R ID E R 8 5 0 RIDER 850 R ID E R 8 5 0 R I D E R 8 5 0 RIDER 850 R I D E R 8 5 0 R ID E R 8 5 0 RIDER 850 R ID E R 8 5 0 R I D E R 8 5 0 RIDER 850 R I D E R 8 5 0 Be extra car eful when driving on slopes. Cut slopes upwar ds and downwar ds, not sideways. • W atch out for traf fic when working close to a road, or crossing one. • B ...

  • Husqvarna 16 H - page 9

    English – 7 R I D E R 9 7 0 RIDER 970 R I D E R 9 7 0 R ID E R 8 5 0 RIDER 850 R ID E R 8 5 0 RIDER 850 RIDER 850 RIDER 850 R ID E R 8 5 0 RIDER 850 R ID E R 8 5 0 RIDER 850 RIDER 850 RIDER 850 Keep childr en away fr om the mowing ar ea. Never allow childr en to drive the machine. Never fill up with fuel indoors. SAFETY INSTRUCTIONS • Do not cu ...

  • Husqvarna 16 H - page 10

    8 – English R ID ER 850 RIDER 850 R ID ER 850 R ID ER 850 RIDER 850 R ID ER 850 R I D E R 9 7 0 RIDER 970 R I D E R 9 7 0 Never smoke in the vicinity of the battery or the fuel. Never drive the machine in an enclosed space. Clean the machine r egularly fr om grass, leaves and other waste. • Avoid overfilling. If fuel has been spilt on the machi ...

  • Husqvarna 16 H - page 11

    English – 9 Presentation Congratulations on your choice of a top quality product which you will enjoy for many years. These instructions describe the Rider 16 H. This rider mower is equipped with a 15.5 horsepower Briggs & Stratton engine. PRESENT A TION Location of the controls 1. Ignition lock 2. Throttle/Choke lever 3. Adjustment of cuttin ...

  • Husqvarna 16 H - page 12

    10 – English PRESENT A TION Throttle and Choke lever The engine speed is adjusted with the throttle control, and thereby also the rotation speed of the blades. The control is also used to activate the choke function. When the choke is used the engine receives a richer mixture of fuel and air , which simplifies cold start. Parking brake The parkin ...

  • Husqvarna 16 H - page 13

    English – 11 PRESENT A TION Cutting unit The Rider 16 H can be fitted with four different cutting units. Rear ejector - 970 mm Side ejector - 970 mm BioClip - 900 mm, 1030 mm Lifting of the cutting unit (transport position) Lowering of the cutting unit (cutting position) Lift lever for cutting unit The lift lever is used to set the cutting unit i ...

  • Husqvarna 16 H - page 14

    12 – English PRESENT A TION ! Fuelling The engine should be run on 85 octane (or higher) unleaded petrol/gasoline (no added oil). Environ- mentally adapted alkylate fuel, such as Aspen, is also recommended. Seat The seat has a jointed attachment on the front edge and can be tipped forward. The seat can also be adjusted lengthways. Release the kno ...

  • Husqvarna 16 H - page 15

    English – 13 • Read the safety instructions and information on the location and function of the controls before starting (see pages 3-12). • Conduct daily maintenance before starting (see maintenance schedule on page 18). Adjust the seat to the required position. Starting the engine 1. Lift up the cutting unit by pulling the lever back- wards ...

  • Husqvarna 16 H - page 16

    14 – English DRIVING W arm engine: 4. Set the throttle control midway between position 1 and 2. W ARNING! Never run the engine indoors, in enclosed or poorly ventilated areas. The exhaust fumes contain toxic carbon monoxide. ! 6. When the engine has started release the igni- tion key to neutral position. Push the throttle control to the required ...

  • Husqvarna 16 H - page 17

    English – 15 DRIVING Driving the machine 1. Release the parking brake by pressing down the brake pedal. 2. Carefully press down one of the pedals until the correct speed is reached. T o drive forwards: press down pedal (1). T o reverse: press down pedal (2). 3. Select the required cutting height (1-9) with the cutting height lever . T o obtain a ...

  • Husqvarna 16 H - page 18

    16 – English Mowing pattern DRIVING 4. Push in the lock button on the lift lever and lower down the cutting unit. IMPORTANT INFORMATION The service-life of the drive belts in- creases considerably if the engine is run at low speed when engaging the blades. For this reason do not increase the throt- tle until the cutting unit has been lowered to t ...

  • Husqvarna 16 H - page 19

    English – 17 DRIVING ! Stopping the engine Preferably allow the engine to idle for a minute to obtain normal working temperature before stopping it if it has been working hard. 1. Lift up the cutting unit by pulling the lever back to the end position. 2. Pull back the throttle control and turn the ignition key to the STOP position. STOP ST ART Re ...

  • Husqvarna 16 H - page 20

    18 – English 50 100 MAINTENANCE 25 ! W ARNING! No service procedures must be conducted on the engine or cutting unit unless: • The engine is switched off. • The ignition key is removed. • The ignition cable is removed from the plug. • The parking brake is applied. • The cutting unit is disengaged. Maintenance schedule The following is a ...

  • Husqvarna 16 H - page 21

    English – 19 Dismantling of the machine hoods Engine hood The engine is accessible for servicing when the engine hood is lifted up. T ilt the seat forward, release the rubber strap under the seat, and tilt the hood backwards. MAINTENANCE Left-hand fender Release the screws in the fender (2) and lift off the fender . Right-hand fender Remove the k ...

  • Husqvarna 16 H - page 22

    20 – English Check the engine’ s oil level Check the oil level in the engine when the machine is horizontal. Dismantle the engine hood as per the description on page 19. Release the dip stick and pull out. Wipe of f the oil and insert again. The dip stick must be fully screwed down. Now release the dip stick again and pull out. Check the oil le ...

  • Husqvarna 16 H - page 23

    English – 21 Checking and adjustment of the steering wires The steering is controlled by means of wires. These can in time become slack, which implies that the adjustment of the steering becomes altered. Check and adjust the steering as follows: 1. Dismantle the frame-plate by releasing the screws (two on each side). MAINTENANCE Adjusting the bra ...

  • Husqvarna 16 H - page 24

    22 – English FULL MAINTENANCE W ARNING! Procedures on contact with acid External: Rinse well with plenty of water . Internal: Drink large quantities of water or milk. Contact a doctor as soon as possible. Eyes: Rinse well with plenty of water . Contact a doctor as soon as possible. Batteries emit explosive gas. Sparks, flames and cigarettes must ...

  • Husqvarna 16 H - page 25

    English – 23 Replacing the air filter If the engine seems to lack power or goes irregu- larly the reason may be that the air filter is clogged. It is therefore important to replace the air filter at regular intervals (see maintenance schedule on page 16 for correct service interval). 1. Dismantle the engine hood as described on page 19. 2. Remove ...

  • Husqvarna 16 H - page 26

    24 – English MAINTENANCE 1 2 3 1 2 8 9 Fitting the cutting unit 1. Position the Rider on a flat surface and apply the parking brake, see page 10. Check that the lever for adjusting the cutting height is at the lowest setting. Make sure the support wheels are fitted to the cutting unit (1). 2. Grasp the handle at the front (BioClip 90) or hold the ...

  • Husqvarna 16 H - page 27

    English – 25 MAINTENANCE Checking and adjustment of the cutting unit’ s ground pressure T o achieve the best cutting results the cutting unit should follow the underlying surface without press- ing too hard against it. The pressure is adjusted with a screw on each side of the machine. 1. Place a set of bathroom scales under the cutting unit’s ...

  • Husqvarna 16 H - page 28

    26 – English MAINTENANCE W ARNING! Wear protective glasses when dismantling the cutting unit. The spring which tensions up the belt can go off and cause personal injury . ! Adjusting the parallelism of the cutting unit 1. Remove the front hood and right-hand fender , as described on page 19. 2. Undo the nuts on the lift strut. 3. Unscrew the stru ...

  • Husqvarna 16 H - page 29

    English – 27 MAINTENANCE BioClip 103 Replacing the cutting unit belts Replacing the belts on a BioClip unit A BioClip unit is driven by two toothed belts that synchronise the rotation of the blades. The belts sit underneath a cover on the cutting unit. 1. Remove the cutting unit, see page 26. 2. Remove the front pin/bolt from the lift strut and s ...

  • Husqvarna 16 H - page 30

    28 – English MAINTENANCE IMPORTANT IMFORMATION On a BioClip unit the blades are set at an angle of 90° to each other. If this angle changes, the blades may touch and cause damage to the cutting unit. 5. Fitting: First slide on the lower belt, then the upper belt. Check that the blades appear as shown in the diagram, at an angle of 90° to each o ...

  • Husqvarna 16 H - page 31

    English – 29 MAINTENANCE Service position for cutting unit The cutting head can be placed in the service position to provide easy access for cleaning, repairs and servicing. In the service position the cutting unit is raised and locked in the vertical position. Placing in service position 1. Position the machine on flat ground. Apply the parking ...

  • Husqvarna 16 H - page 32

    30 – English MAINTENANCE 4. Fit the support wheels on either side of the rear of the cutting unit. 5. Disengage the spring from the drive belt tensioning wheel. 6. Place a foot on the front edge of the cutting unit near the wheel and raise the front edge of the unit to make it easier to remove the lift strut. Engage the strut in the holder . ...

  • Husqvarna 16 H - page 33

    English – 31 MAINTENANCE Restoring from service position T o restore the machine from the service position, reverse the sequence “Placing in Service position“. 2 1 7. Lift of f the drive belt (1). Then pull out the pin (2). T ake care not to get your hand trapped. 8. Pull the frame forwards and insert the pin. 9. Grasp the front edge of the c ...

  • Husqvarna 16 H - page 34

    32 – English Lubrication The following two lubrication points should be regularly lubricated with high quality graphite grease. With daily use lubrication should be conducted twice a week. General lubrication All joints and bearings are lubricated on manufac- ture with molybdenum sulphide grease. Re-grease with same type of grease. Lubricate the ...

  • Husqvarna 16 H - page 35

    English – 33 MAINTENANCE Checking the blades T o achieve the best mowing results it is important that the blades are undamaged and well-sharpened. Check that the blades’ attachment screws are tight. IMPORTANT INFORMATION Replacing or sharpening the blades should be conducted by an authorised service workshop. IMPORTANT INFORMATION On the Biocli ...

  • Husqvarna 16 H - page 36

    34 – English ADD FULL ADD FULL MAINTENANCE Changing the oil The oil should be changed for the first time after 5 hours of running time. Thereafter it should be changed every 25 hours of running time. W ARNING! Engine oil can be very hot if it is drained off directly after the engine is stopped. Therefore allow the engine to cool down first. ! IMP ...

  • Husqvarna 16 H - page 37

    English – 35 MAINTENANCE Checking and adjustment of the throttle wire If the engine does not respond as it should do when the throttle lever is moved or if the top speed is not reached, the throttle wire may need adjusting. 1. Release the clamping screw (see arrow) and push the throttle control to full throttle position. Replacement of the fuel f ...

  • Husqvarna 16 H - page 38

    36 – English Problem Procedure Engine will not start. • Fuel tank empty . • Plug defective. • Plug connection defective. • Dirt in carburettor or fuel pipe. Starter does not pull round engine. • Battery flat. • Bad contact between cable and battery terminal. • Lift lever for cutting unit in wrong position. • Main fuse blown. The f ...

  • Husqvarna 16 H - page 39

    English – 37 Winter storage At the end of the season the machine should immediately be put in order for storage, also if it is going to stand idle for more than 30 days. Fuel which is left to stand for long periods (30 days or more) can leave tacky deposits which can block the carburettor and interfere with the engine. Fuel stabiliser is an accep ...

  • Husqvarna 16 H - page 40

    Dimensions Rider 16 H Length without cutting unit 2145 mm Width without cutting unit 1050 mm Height 1060 mm Service weight 245 kg including cutting unit Wheel base 855 mm T rack Front 715 mm, rear 625 mm T yre size 16 x 6.50 x 8 T yre pressure, front 60 kPa (0.6 kp/cm 2 ) & rear Max. gradient 15° Engine Manufacture Briggs & Stratton model ...

  • Husqvarna 16 H - page 41

    EU declaration of conformity (Only applies to Europe) (Directive 89/392/EEC, Annex II, A) We, Husqvarna AB, S-561 82 Huskvarna, Sweden, tel. +46 36-146500, declare under sole responsibility that the rider mowers Husqvarna Rider 16 H from 1998’ s serial numbers and onwards (the year is clearly stated in plain text on the type plate with subsequent ...

  • Husqvarna 16 H - page 42

    40 – English ´*3(•¶5b¨ ...

  • Husqvarna 16 H - page 43

    English – 41 ...

  • Husqvarna 16 H - page 44

    ´*3(•¶5b¨ 2000W06 ...

Fabbricante Husqvarna Categoria Lawn Mower

I documenti che otteniamo dal fabbricante del dispositivoHusqvarna 16 H possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Husqvarna
- manuali per l’uso 16 H
- schede prodotto Husqvarna
- opuscoli
- o etichette energetiche Husqvarna 16 H
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Husqvarna 16 H.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Husqvarna 16 H, manuali di manutenzione, brevi manuali o manuali utente Husqvarna 16 H. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Husqvarna 16 H.

Manuali per l’uso simili

Manuale completo del dispositivo Husqvarna 16 H, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Husqvarna 16 H dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Husqvarna 16 H.

Il manuale per l’uso completo Husqvarna, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Husqvarna 16 H - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Husqvarna 16 H, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Husqvarna 16 H che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Husqvarna 16 H - che ci dovrebbe aiutare nei primi passi durante l'uso Husqvarna 16 H
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Husqvarna 16 H
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Husqvarna 16 H in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Husqvarna 16 H?

Utilizza il modulo sottostante

Se non hai risolto il problema con Husqvarna 16 H con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Husqvarna 16 H è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)