-
Kenwood XD-8001 - page 1
B60-3850-00 00 MA (T E2 Q) 99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 COMPONENT SYSTEM/COMP A CT HI-FI SYSTEM INSTRUCTION MANUAL KENW OOD CORPORA TION This instruction manual is used for six models. Model availability and features (functions) may differ depending on the country and sales area. MC XD SERIES XD-8001 XD-8051 XD-8501 XD-8551 ...
-
Kenwood XD-8001 - page 2
XD SERIES (En/E2) 2 Preparation section Basic section Application section Knowledge sections Before applying power Units are designed for operation as follows. Europe , U.K. and Russia ........................................................ AC 230 V only Factory fitted moulded mains plug 1. The mains plug contains a fuse. For replacement, use only ...
-
Kenwood XD-8001 - page 3
XD SERIES (En/E2) 3 Preparation section Basic section Application section Knowledge sections Contents Preparation section Basic section Knowledge section Before applying power ............................................ 2 Safety precautions ....................................................... 2 Contents ......................................... ...
-
Kenwood XD-8001 - page 4
XD SERIES (En/E2) 4 Preparation section Basic section Application section Knowledge sections V arious CD editing & recording features are available for selection according to the tape you require. ÷ One-touch edit recording : Single press of a key allows to record the entire CD or a track. ÷ Program edit recording : Recording desired CD track ...
-
Kenwood XD-8001 - page 5
XD SERIES (En/E2) 5 Preparation section Basic section Application section Knowledge sections 2. Endless tapes Do not use an endless tape, as this could damage the mechanism of the unit. To re-record Safety tab (accidental erasure prevention tab) After an important recording has been finished, break the safety tab, to prevent the recorded contents f ...
-
Kenwood XD-8001 - page 6
XD SERIES (En/E2) 6 Preparation section Basic section Application section Knowledge sections R L + − + − SPEAKERS ( 6 - 16 Ω ) SUPER WOOFER PRE OUT CONNECT WITH C-H5 OR C-H6 OR C-H7 CONNECT WITH A-H5 R L GND AM ANTENNA MD AUX INPUT REC OUT PLAY IN FM 75 Ω OPTICAL CONNECT WITH C-H5 OR C-H6 OR C-H7 AND X-H5 OR DM-H5 DIGITAL OUTPUT CONNECT WIT ...
-
Kenwood XD-8001 - page 7
XD SERIES (En/E2) 7 Preparation section Basic section Application section Knowledge sections − + 4 4 ÷ When connecting the parallel cord, insert plug straight into the connector until it clicks to look them securely. ÷ When connecting the parallel cord, the wire while line should come to the left side end. ÷ When disconnecting the parallel cor ...
-
Kenwood XD-8001 - page 8
XD SERIES (En/E2) 8 Preparation section Basic section Application section Knowledge sections R L + − + − SPEAKERS ( 6 - 16 Ω ) SUPER WOOFER PRE OUT CONNECT WITH C-H5 OR C-H6 OR C-H7 CONNECT WITH A-H5 R L GND AM ANTENNA MD AUX INPUT REC OUT PLAY IN FM 75 Ω OPTICAL CONNECT WITH C-H5 OR C-H6 OR C-H7 AND X-H5 OR DM-H5 DIGITAL OUTPUT CONNECT WIT ...
-
Kenwood XD-8001 - page 9
XD SERIES (En/E2) 9 Preparation section Basic section Application section Knowledge sections R L + − + − SPEAKERS ( 6 - 16 Ω ) SUPER WOOFER PRE OUT CONNECT WITH C-H5 OR C-H6 OR C-H7 CONNECT WITH A-H5 R L GND AM ANTENNA MD AUX INPUT REC OUT PLAY IN FM 75 Ω OPTICAL CONNECT WITH C-H5 OR C-H6 OR C-H7 AND X-H5 OR DM-H5 DIGITAL OUTPUT CONNECT WIT ...
-
Kenwood XD-8001 - page 10
XD SERIES (En/E2) 10 Preparation section Basic section Application section Knowledge sections Controls and indicators T uner/Equalizer Unit (C-H6) 1 EQ. EFFECT key P The equalizer effect is switched ON/OFF and the type of equalizer effect is selected. 2 EX. BASS (Extra bass) key/Indicator ¡Á When power is ON: Press to enhance the high and low fre ...
-
Kenwood XD-8001 - page 11
XD SERIES (En/E2) 11 Preparation section Basic section Application section Knowledge sections Controls and indicators PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE AUTO TUNED DISC ALL STEREO kHz MHz MUTE 12 PROG. N.B. ********* ;* 1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 6 7 8 9 10 MAX SLEEP O.T.T. ECHO P.B.C. EQ. ON MANU. VOL. MUSIC CALEND ...
-
Kenwood XD-8001 - page 12
XD SERIES (En/E2) 12 Preparation section Basic section Application section Knowledge sections Controls and indicators T uner/Equalizer Unit (C-H5) 1 EQ. EFFECT key P The equalizer effect is switched ON/OFF and the type of equalizer effect is selected. 2 EX. BASS (Extra bass) key/Indicator ¡Á When power is ON: Press to enhance the high and low fre ...
-
Kenwood XD-8001 - page 13
XD SERIES (En/E2) 13 Preparation section Basic section Application section Knowledge sections Controls and indicators Display (C-H5) 1 Tuner and applied operation indicators This section contains the indicators of the tuner operations as well as applied CD operation. 2 RDS-related indicators 3 Timer-related display 4 Character information display 5 ...
-
Kenwood XD-8001 - page 14
XD SERIES (En/E2) 14 Preparation section Basic section Application section Knowledge sections Controls and indicators Amplifier unit 1 ON/STANDBY ( ) key/Indicator Power ON/OFF switching is executed. The indicator in the key lights in green when the power is ON and in red when it is off (provided that the power cord is connected to a power outlet). ...
-
Kenwood XD-8001 - page 15
XD SERIES (En/E2) 15 Preparation section Basic section Application section Knowledge sections Controls and indicators Cassette deck unit 1 A deck cassette holder Press the area marked PUSH OPEN to load or eject a tape. 2 B deck cassette holder Press the area marked PUSH OPEN to load or eject a tape. 3 Fast forward and rewind ( 1 ¡ ) keys 4 DUBBING ...
-
Kenwood XD-8001 - page 16
XD SERIES (En/E2) 16 Preparation section Basic section Application section Knowledge sections Controls and indicators CD player unit (DP-H5) 1 Disc tray 2 Eject ( 0 ) key The disc tray is opened and closed. 3 STOP ( 7 ) key 4 PLAY/PAUSE ( 6 ) key/Indicator The playback or pause functions are activated alternately every time the key is pressed. STOP ...
-
Kenwood XD-8001 - page 17
XD SERIES (En/E2) 17 Preparation section Basic section Application section Knowledge sections Controls and indicators CD player unit (DP-MH5) 1 Disc tray 2 TWIN REC key I Press when recording CD simultaneously onto a MD and tape. 3 OPEN/CLOSE ( 0 1~ 0 6) key The disc tray is opened and closed. 4 Fast forward and fast reverse ( 1 ¡ ) keys Press to ...
-
Kenwood XD-8001 - page 18
XD SERIES (En/E2) 18 Preparation section Basic section Application section Knowledge sections 1 DISC SKIP key (For DP-MH5) Press to select the disc to be used for playback or recording. 2 SLEEP key Press to set the sleep timer function. ˇ 3 Tone control-related keys SOURCE DIRECT key : Press the key when you want to enjoy a purer sound. ¡ EQ. key ...
-
Kenwood XD-8001 - page 19
XD SERIES (En/E2) 19 Preparation section Basic section Application section Knowledge sections Operation Loading batteries 2 Insert batteries. 3 Close the cover. Plug the power cord of the amplifier unit (A-H5) into a power outlet and press the ON/STANDBY ( ) key of the remote control unit to turn power ON. When the power is turned ON, press the des ...
-
Kenwood XD-8001 - page 20
XD SERIES (En/E2) 20 Preparation section Basic section Application section Knowledge sections INPUT DISC SKIP SRS 3D EX.BASS N.B. SOURCE DIRECT PTY SEARCH EQ. PTY DOWN TUNING UP MUTE BAND A/B RDS DISPLAY TA/NEWS /INFO. ENTER REC/ARM AUTO M. REPEAT TIME RANDOM SPACE P.MODE CHECK EDIT CLEAR 23 1 56 4 89 7 0 +10 SLEEP P.CALL VOLUME CD TAPE MD TAPE CD ...
-
Kenwood XD-8001 - page 21
XD SERIES (En/E2) 21 Preparation section Basic section Application section Knowledge sections 1 Insert the headphone plug into the PHONES jack. ÷ The sounds from all speakers are cut off. 2 Adjust the volume. ÷ Be sure to decrease the volume before plugging or unplugging the headphones. PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE AUTO ...
-
Kenwood XD-8001 - page 22
XD SERIES (En/E2) 22 Preparation section Basic section Application section Knowledge sections INPUT DISC SKIP SRS 3D EX.BASS N.B. SOURCE DIRECT PTY SEARCH EQ. PTY DOWN TUNING UP MUTE BAND A/B RDS DISPLAY TA/NEWS /INFO. ENTER REC/ARM AUTO M. REPEAT TIME RANDOM SPACE P.MODE CHECK EDIT CLEAR 23 1 56 4 89 7 0 +10 SLEEP P.CALL VOLUME CD TAPE MD TAPE CD ...
-
Kenwood XD-8001 - page 23
XD SERIES (En/E2) 23 Preparation section Basic section Application section Knowledge sections T ime display for the CD player Each press of the TIME key switches the time information. T o stop playback ÷ Each press pauses and plays the CD alternately. T o pause playback High-speed search in forward and reverse directions ÷ Do not touch the played ...
-
Kenwood XD-8001 - page 24
XD SERIES (En/E2) 24 Preparation section Basic section Application section Knowledge sections INPUT DISC SKIP SRS 3D EX.BASS N.B. SOURCE DIRECT PTY SEARCH EQ. PTY DOWN TUNING UP MUTE BAND A/B RDS DISPLAY TA/NEWS /INFO. ENTER REC/ARM AUTO M. REPEAT TIME RANDOM SPACE P.MODE CHECK EDIT CLEAR 23 1 56 4 89 7 0 +10 SLEEP P.CALL VOLUME CD TAPE MD TAPE CD ...
-
Kenwood XD-8001 - page 25
XD SERIES (En/E2) 25 Preparation section Basic section Application section Knowledge sections PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE AUTO TUNED DISC ALL STEREO kHz MHz MUTE 12 PROG. N.B. D1 * )1 ** )1 :5 1 2 3 4 5 11 12 13 14 15 6 7 8 9 10 MAX EQ. 2 13 : 3 - 7 : 2 45 : 3 2 - 15 6 3 : T o stop playback ÷ Each press pauses and plays ...
-
Kenwood XD-8001 - page 26
XD SERIES (En/E2) 26 Preparation section Basic section Application section Knowledge sections INPUT DISC SKIP SRS 3D EX.BASS N.B. SOURCE DIRECT PTY SEARCH EQ. PTY DOWN TUNING UP MUTE BAND A/B RDS DISPLAY TA/NEWS /INFO. ENTER REC/ARM AUTO M. REPEAT TIME RANDOM SPACE P.MODE CHECK EDIT CLEAR 23 1 56 4 89 7 0 +10 SLEEP P.CALL VOLUME CD TAPE MD TAPE CD ...
-
Kenwood XD-8001 - page 27
XD SERIES (En/E2) 27 Preparation section Basic section Application section Knowledge sections 23 Selection of DOLBY NR (Noise Reduction) T o stop playback Selection of reverse mode. T o wind tape at high speed T o fast wind in direction The Dolby NR system minimizes the hiss noise heard when playing tape. When playing a tape prerecorded with Dolb ...
-
Kenwood XD-8001 - page 28
XD SERIES (En/E2) 28 Preparation section Basic section Application section Knowledge sections DPSS (Direct Program Search System) Let's put out some sound DPSS (Direct Program Search System) detects an unre- corded part of 4 seconds or more as the interval between titles and permits easy operation of cassette tape like a CD. ↑ ↑ ↑ ↑ ? ...
-
Kenwood XD-8001 - page 29
XD SERIES (En/E2) 29 Preparation section Basic section Application section Knowledge sections O p π O p π 23 One-program repeat playback Plays a single music program repeatedly up to 16 times. ÷ The program being played will be repeated 16 times, after which normal playback resumes. ÷ When the 7 key is pressed, playback stops and the one ...
-
Kenwood XD-8001 - page 30
XD SERIES (En/E2) 30 Preparation section Basic section Application section Knowledge sections INPUT DISC SKIP SRS 3D EX.BASS N.B. SOURCE DIRECT PTY SEARCH EQ. PTY DOWN TUNING UP MUTE BAND A/B RDS DISPLAY TA/NEWS /INFO. ENTER REC/ARM AUTO M. REPEAT TIME RANDOM SPACE P.MODE CHECK EDIT CLEAR 23 1 56 4 89 7 0 +10 SLEEP P.CALL VOLUME CD TAPE MD TAPE CD ...
-
Kenwood XD-8001 - page 31
XD SERIES (En/E2) 31 Preparation section Basic section Application section Knowledge sections PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE AUTO TUNED DISC ALL STEREO kHz MHz MUTE 12 PROG. N.B. -- * FM * 89) .) 1 2 3 4 5 11 12 13 14 15 6 7 8 9 10 MAX ENTER Collective presetting of stations (auto preset) ÷ Repeat steps 12 to preset other s ...
-
Kenwood XD-8001 - page 32
XD SERIES (En/E2) 32 Preparation section Basic section Application section Knowledge sections INPUT DISC SKIP SRS 3D EX.BASS N.B. SOURCE DIRECT PTY SEARCH EQ. PTY DOWN TUNING UP MUTE BAND A/B RDS DISPLAY TA/NEWS /INFO. ENTER REC/ARM AUTO M. REPEAT TIME RANDOM SPACE P.MODE CHECK EDIT CLEAR 23 1 56 4 89 7 0 +10 SLEEP P.CALL VOLUME CD TAPE MD TAPE CD ...
-
Kenwood XD-8001 - page 33
XD SERIES (En/E2) 33 Preparation section Basic section Application section Knowledge sections Selection of DOLBY NR (Noise Reduction) The Dolby NR system minimizes the hiss noise heard when playing tape. T o end recording Selection of the reverse mode ÷ Pressing the key pauses recording after leaving a non-recorded space of about 4 seconds. ÷ If ...
-
Kenwood XD-8001 - page 34
XD SERIES (En/E2) 34 Preparation section Basic section Application section Knowledge sections Let's record Adjusting the recording level Restarting recording The following procedure allows to re-record sound from the middle of recording. The following procedure assumes the presence of a non- recorded section of 4 seconds before the recording s ...
-
Kenwood XD-8001 - page 35
XD SERIES (En/E2) 35 Preparation section Basic section Application section Knowledge sections Copying tape (T ape dubbing) The contents of the tape in deck A can be copied onto the tape in deck B. The DOLBY NR key is not active in dubbing mode. The tape recorded on deck B assumes the same Dolby NR condition as the tape played on deck A. Note Note ? ...
-
Kenwood XD-8001 - page 36
XD SERIES (En/E2) 36 Preparation section Basic section Application section Knowledge sections Playback of CD (DP-H5) If it is in play mode Select the “CD” input. 1 Check that the CD player is in the stop mode. 2 3 ÷ Up to 32 tracks can be programmed. When “FULL” is displayed, no more tracks can be programmed. ÷ If you make a mistake, pres ...
-
Kenwood XD-8001 - page 37
XD SERIES (En/E2) 37 Preparation section Basic section Application section Knowledge sections T o stop playback ÷ The entire program contents also are erased when the disc tray is opened. T o check the programmed tracks Playback of CD PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE AUTO TUNED DISC ALL STEREO kHz MHz MUTE 12 PROG. N.B. CD * ...
-
Kenwood XD-8001 - page 38
XD SERIES (En/E2) 38 Preparation section Basic section Application section Knowledge sections Select the “CD” input. Playback of CD T o repeat a disc 2 Press the REPEAT key. 3 Start playback. If the “PGM” indicator is lit, press the P.MODE key to turn it off. T o stop repeated playback Press the REPEAT key again. ÷ The REPEAT indicator tur ...
-
Kenwood XD-8001 - page 39
XD SERIES (En/E2) 39 Preparation section Basic section Application section Knowledge sections Select the RANDOM mode. If the “PGM” indicator is lit, press the P.MODE key to turn it off. ÷ After every track, the music calendar blinks and the next selected track is played. ÷ Playback stops after each title has been played once. ÷ The random pl ...
-
Kenwood XD-8001 - page 40
XD SERIES (En/E2) 40 Preparation section Basic section Application section Knowledge sections Playback of CD (DP-MH5) Playback of CD If it is in play mode Select the “CD” input. 1 Check that the CD player is in the stop mode. 2 3 ÷ The disc can also be selected with the Disc selector (DISC 1 ~ DISC 6) key. ÷ Up to 32 tracks can be programmed. ...
-
Kenwood XD-8001 - page 41
XD SERIES (En/E2) 41 Preparation section Basic section Application section Knowledge sections T o stop playback T o check the programmed tracks PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE AUTO TUNED DISC ALL STEREO kHz MHz MUTE 12 PROG. N.B. D2 * )3 * P-) : 1 1 2 3 4 5 11 12 13 14 15 6 7 8 9 10 MAX 7 CHECK T o add a track to the program ...
-
Kenwood XD-8001 - page 42
XD SERIES (En/E2) 42 Preparation section Basic section Application section Knowledge sections Playback of CD Select the “CD” input. Desired titles or discs can be played back repeatedly . T o repeat all discs 2 Press the REPEAT key. 3 Select the disc to be played first If the “PGM” indicator is lit, press the P.MODE key to turn it off. T o ...
-
Kenwood XD-8001 - page 43
XD SERIES (En/E2) 43 Preparation section Basic section Application section Knowledge sections Select the RANDOM mode. If the “PGM” indicator is lit, press the P.MODE key to turn it off. ÷ After every track, the music calendar blinks and the next selected track is played. ÷ Playback stops after each title has been played once. ÷ The random pl ...
-
Kenwood XD-8001 - page 44
XD SERIES (En/E2) 44 Preparation section Basic section Application section Knowledge sections ...
-
Kenwood XD-8001 - page 45
XD SERIES (En/E2) 45 Preparation section Basic section Application section Knowledge sections RDS is a system which transmits useful information (dig- ital data) for FM broadcasts together with the broadcast signal. T uners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions ...
-
Kenwood XD-8001 - page 46
XD SERIES (En/E2) 46 Preparation section Basic section Application section Knowledge sections TUNING keys Program T ype Name Display Pop Music POP M Rock Music ROCK M * M.O.R. Music M.O.R. M Light Classical LIGHT M Serious Classical CLASSICS Other Music OTHER M News NEWS Current Affairs AFF AIRS ( 1 ) Information INFO DOWN Sport SPORT Education EDU ...
-
Kenwood XD-8001 - page 47
XD SERIES (En/E2) 47 Preparation section Basic section Application section Knowledge sections PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE AUTO TUNED DISC ALL STEREO kHz MHz MUTE 12 PROG. N.B. BBC K 1 M FM 1 :5 1 2 3 4 5 11 12 13 14 15 6 7 8 9 10 MAX PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE AUTO TUNED DISC ALL STEREO kHz MHz ...
-
Kenwood XD-8001 - page 48
XD SERIES (En/E2) 48 Preparation section Basic section Application section Knowledge sections R.D.S. Set the reception band to FM. T o be able to listen to the desired information at any time By using the EON function, which manages the informa- tion of other stations, listening to desired information like traffic information or news etc. can be re ...
-
Kenwood XD-8001 - page 49
XD SERIES (En/E2) 49 Preparation section Basic section Application section Knowledge sections ÷ When one of the stations of the network of the station received in 3 starts broadcasting the program contents selected in 2 , that station will be received automatically. At this time, tape playback will stop and CD playback will pause. However, externa ...
-
Kenwood XD-8001 - page 50
XD SERIES (En/E2) 50 Preparation section Basic section Application section Knowledge sections T o record tracks in your desired order If you want to record a CD in order of track num- bers If you want to select the tracks to be recorded while playing a CD C. Program edit recording R This allows to select and record only the desired tracks in the ...
-
Kenwood XD-8001 - page 51
XD SERIES (En/E2) 51 Preparation section Basic section Application section Knowledge sections A D E F BC G D Convenient CD recording C Recording tracks from one or several CDs (Program edit recording) R D Reordering tracks according to the tape length (T ime edit recording) T E Recording by fading in and fading out the tracks at the ends of tape si ...
-
Kenwood XD-8001 - page 52
XD SERIES (En/E2) 52 Preparation section Basic section Application section Knowledge sections 1 Press the O.T.E. key. Select the disc. (DP-MH5 only) 2 3 T o end recording in the middle Go to step 3 before playback starts. When the O.T .E. key is pressed while the CD player is in the stop mode, recording of a CD can be started at the same time as pl ...
-
Kenwood XD-8001 - page 53
XD SERIES (En/E2) 53 Preparation section Basic section Application section Knowledge sections 1 3 2 When you want to record a track being played, press the O.T.E. key. Play a CD. T o end recording in the middle At the time of CD playback, any desired title can be selected immediately for recording. When recording sound from the MD recorder to a cas ...
-
Kenwood XD-8001 - page 54
XD SERIES (En/E2) 54 Preparation section Basic section Application section Knowledge sections 3 2 Convenient CD recording Recording preparations are required. ¤ ¤ ¤ ¤ ¤ For the reverse mode, select “ ” ”,“ [ ” (two-way recording). 1 Press so that the “PGM” indicator lights. ÷ Select CD tracks so that their total playing time doe ...
-
Kenwood XD-8001 - page 55
XD SERIES (En/E2) 55 Preparation section Basic section Application section Knowledge sections CCRS REC / ARM During recording: X-H5 3 2 1 Press so that the “PGM” indicator goes off. Giving preference to the tape length over the title sequence (Time edit recording) Recording preparations are required. ¤ ¤ ¤ ¤ ¤ For the reverse mode, select ...
-
Kenwood XD-8001 - page 56
XD SERIES (En/E2) 56 Preparation section Basic section Application section Knowledge sections To clear the edited contents (Program edit recording, Time edit recording) To check the edited contents (Program edit recording, Time edit recording) ÷ When the P.MODE key is pressed at the time of program recording, all editing contents are erased. When ...
-
Kenwood XD-8001 - page 57
XD SERIES (En/E2) 57 Preparation section Basic section Application section Knowledge sections 3 1 Start edit recording. Select the disc. (DP-MH5 only) 2 Go to step 3 before playback starts. Recording preparations are required. ¤ ¤ ¤ ¤ ¤ For the reverse mode, select “ ” ” ,“ [ ” (two-way recording). The tune interrupted at the end of ...
-
Kenwood XD-8001 - page 58
XD SERIES (En/E2) 58 Preparation section Basic section Application section Knowledge sections 3 1 Start edit recording. Select the disc. 2 Go to step 3 before playback starts. Recording preparations are required. ¤ ¤ ¤ ¤ ¤ For the reverse mode, select “ ” ” ,“ [ ”(two-way recording). This function allows to record CD sound simultaneo ...
-
Kenwood XD-8001 - page 59
XD SERIES (En/E2) 59 Preparation section Basic section Application section Knowledge sections The Sound Retrieval System is an epochal system which produces a three-dimensional sound space by applying the most suitable processing to the sound signal on the basis of the human listening mechanism. This permits real depth and sound location, considere ...
-
Kenwood XD-8001 - page 60
XD SERIES (En/E2) 60 Preparation section Basic section Application section Knowledge sections Listening with the desired sound (equalizer function) In addition to the five kinds of equalizer patterns which have been preset at the factory for use as reference, one equalizer pattern created manually by the user can be stored in memory and recalled an ...
-
Kenwood XD-8001 - page 61
XD SERIES (En/E2) 61 Preparation section Basic section Application section Knowledge sections Creation and memorizing of an equalizer pattern Effective Sound Adjustment 1 Display “MANUAL”. 3 Store the pattern in memory. (3) Adjust other items by repeating steps (1) and (2) for each. (2) Adjust the level. 2 Adjust the equalizer pattern. PROG. PG ...
-
Kenwood XD-8001 - page 62
XD SERIES (En/E2) 62 Preparation section Basic section Application section Knowledge sections BALANCE adjustment Adjustment of balance and input level Balance .......... Adjusts the balance of left and right volume. Input level ..... The input level from the external equipment connected to the AUX input jacks (VCR, etc.) or the external equipment c ...
-
Kenwood XD-8001 - page 63
XD SERIES (En/E2) 63 Preparation section Basic section Application section Knowledge sections Switching the display From the wide range of display formats provided by the system, it is possible to select the desired formats. Switching the dual display (For the systems including C-H6) The display panel of the tuner/equalizer unit has been designed t ...
-
Kenwood XD-8001 - page 64
XD SERIES (En/E2) 64 Preparation section Basic section Application section Knowledge sections Clock adjustment Enter the figure of minute. Enter the figure of hour. Activate the clock adjustment mode. This unit incorporates a clock function. Be sure to adjust the correct time before using the timer function. ÷ The time of the day is represented in ...
-
Kenwood XD-8001 - page 65
XD SERIES (En/E2) 65 Preparation section Basic section Application section Knowledge sections T imer operation Adjust the clock before setting the timer . Operate easy T o use T imer (O.T .T .) Playback of the selected input source starts at the specified time, and the power is switched off after one hour . This timer operates only once directly af ...
-
Kenwood XD-8001 - page 66
XD SERIES (En/E2) 66 Preparation section Basic section Application section Knowledge sections Adjust the clock before setting the timer. Set the POWER switch to OFF (STANDBY) position. Adjust the listening volume. Make preparations for the play (recording). ÷ When recording radio, the listening volume is automatically set to the minimum volume at ...
-
Kenwood XD-8001 - page 67
XD SERIES (En/E2) 67 Preparation section Basic section Application section Knowledge sections Make the desired reservation. Select the timer program No. to be used. Enter the OFF time. Enter the ON time. 1 PROG.1 ..... Execution of program 1 only. 2 PROG.2 ..... Execution of program 2 only. 3 PROG.1, 2 . Execution of programs 1 and 2. 4 Timer OFF ? ...
-
Kenwood XD-8001 - page 68
XD SERIES (En/E2) 68 Preparation section Basic section Application section Knowledge sections Ensure that the power is OFF. Note Note T imer operation Adjust the clock before setting the timer. The reservation contents cannot be cleared. The contents are cleared only when they are changed. Press so that all PROG. indicators are OFF. Press so that t ...
-
Kenwood XD-8001 - page 69
XD SERIES (En/E2) 69 Preparation section Basic section Application section Knowledge sections Be especially careful in the following conditions: ÷ When the unit is brought from a cold place to a warm place, and there is a large temperature difference. ÷ When a heater starts operating. ÷ When the unit is brought from an air-conditioned place to a ...
-
Kenwood XD-8001 - page 70
XD SERIES (En/E2) 70 Preparation section Basic section Application section Knowledge sections ÷ Adjust the present time again. ÷ Adjust the present time again. ÷ Adjust the present time referring to “Clock adjustment”. ÷ Set the timer ON time and OFF time. ÷ Execute the timer program with the SRS 3D key. ÷ Connect antennas. ÷ Select a ba ...
-
Kenwood XD-8001 - page 71
XD SERIES (En/E2) 71 Preparation section Basic section Application section Knowledge sections ÷ Cords are connected improperly. ÷ The head is dirty. ÷ The tape is wound too tight due to irregular winding. ÷ A nonrecorded tape is played. ÷ The cassette holder is not closed com- pletely. ÷ The operation key is pressed immediately after closing ...
-
Kenwood XD-8001 - page 72
XD SERIES (En/E2) 72 Preparation section Basic section Application section Knowledge sections ÷ Place the disc properly, with the label side facing upward. ÷ Place the disc properly. ÷ Clean the disc referring to “Disc handling precautions”. ÷ Try another disc. ÷ Refer to “Beware of condensation” and remove the condensation by evaporat ...
-
Kenwood XD-8001 - page 73
XD SERIES (En/E2) 73 Preparation section Basic section Application section Knowledge sections Specifications Notes Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. Sufficient performance may not be possible at very low temperatures (0°C or less). WARNING N ...
-
Kenwood XD-8001 - page 74
XD SERIES (En/E2) 74 Preparation section Basic section Application section Knowledge sections CD player unit (DP-H5 / DP-MH5) Format section Laser ...................................................... Semiconductor laser D/A convertors section D/A conversion ................................................................. 1 bit Oversampling ..... ...
-
Kenwood XD-8001 - page 75
XD SERIES (En/E2) 75 Preparation section Basic section Application section Knowledge sections ...
-
Kenwood XD-8001 - page 76
For your records Record the serial number , found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below . Re- fer to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model Serial Number ...
Hai una domanda su Kenwood XD-8001?
Utilizza il modulo sottostante
Se non hai risolto il problema con Kenwood XD-8001 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Kenwood XD-8001 è probabile che voglia condividere il modo di risolverlo.