Italiano dropdown-ico

Manuale per l’uso Craftsman 315.10849

20 pagine 0.89 mb
Scarica

Vai alla pagina of 20

Summary
  • Craftsman 315.10849 - page 1

    Owner's Manual 7-1/4 in. CIRCULAR SAW Double Insulated Model No. 315.108490 Save this manual for future reference. _1= CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www. ...

  • Craftsman 315.10849 - page 2

    • Table Of Contents .......................................................................................................................................... 2 • Warranty ......................................................................................................................................................... 2 • Introduction . ...

  • Craftsman 315.10849 - page 3

    The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding, The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBO ...

  • Craftsman 315.10849 - page 4

    RULES FOR SAFE OPERATION (Continued) USE RIGHT TOOL. Don't force small tool or attachment to do the job of a heavy duty too!. Don't use tool for purpose not intended - for example - a circular saw should never be used for cutting tree limbs or logs. WEAR PROPER APPAREL. Do not wear loose clothing or jewelry that can get caught in tool&apo ...

  • Craftsman 315.10849 - page 5

    RULES FOR SAFE OPERATION (Continued) SUPPORT LARGE PANELS, To minimize the risk of blade pinching and kickback, always support large panels as shown in Figure 9, page 10. When cutting operation requires the resting of the saw on the workpiece, the saw should be rested on the larger portion and the smaller piece cut off. • LOWER BLADE GUARD. WARNI ...

  • Craftsman 315.10849 - page 6

    Horsepower Input Blade Diameter Blade Arbor Cutting Depth at 0 ° Bevel Cut 2-1/4 12 Amperes 7-1/4 in. (184 mm) 5/8 in. (16 mm) 2-3/8 in. (60 ram) Cutting Depth at 45 ° Bevel Cut Cutting Depth at 51.5 ° Bevel Cut Rating No Load Speed 1-13/16 in. (46 ram) 1-5/8 in. (41 ram) 120 volts, 60 Hz, AC 5,000 RPM Your circular saw has been shipped complete ...

  • Craftsman 315.10849 - page 7

    KNOW YOUR CIRCULAR SAW See Figure 1. Before attempting to use any tool, familiarize yourself with all operating features and safety requirements. Features include easily operated bevel cut and depth of cut adjustment mechanisms, positive O ° bevel stop, length of cut scale, directed air flow for keeping line of cut clear, and blade wrench storage. ...

  • Craftsman 315.10849 - page 8

    _ WARNING: Your saw should never be connected to power supply when you are assembling parts, making adjustments, assembling or removing blades, cleaning, or when not in use. Disconnecting your saw will prevent accidental starting that could cause serious personal injury. ,_ WARNING: A 7-1/4 in. blade is the maximum blade capacity of your saw. Never ...

  • Craftsman 315.10849 - page 9

    SAW BLADES The best of saw blades will not cut efficiently if they are not kept clean, sharp, and properly set. Using a dull blade will place a heavy toad on your saw and increase the danger of kickback. Keep extra blades on hand, so that sharp blades are always available. Gum and wood pitch hardened on blades will slow your saw down. Use gum and p ...

  • Craftsman 315.10849 - page 10

    TO LESSEN THE CHANCE OF KICKBACK: • Always keep the correct blade depth setting - the correct blade depth setting for all cuts should not exceed 1/4 inch below the material to be cut. See Figure 8. CORRECT BLADEDEPTH SETTING = BLADE EXPOSED I/4 in. OR LESS ON UNDERSIDE OF WORKPIECE Fig. 8 • Inspect the workpiece for knots or nails before beginn ...

  • Craftsman 315.10849 - page 11

    STARTING A CUT Know the right way to use your saw. See Figure 1 I. RIGHT Fig. 11 _IL WARNING: To make sawing easier and safer, always maintain proper control of your saw. Loss of control of your saw could cause an accident resulting in possible serious injury. Never use your saw as shown in Figure 12. TO HELP MAINTAIN CONTROL: • Always support yo ...

  • Craftsman 315.10849 - page 12

    Hold your saw firmly with both hands. See Figure 14. RIGHT Fig. 14 Squeeze the switch trigger to start your saw. Always let the blade reach full speed, then guide your saw into the workpiece. _ WARNING: The blade coming in contact with the workpiece before it reaches full speed could cause your saw to "kickback" towards you resulting in s ...

  • Craftsman 315.10849 - page 13

    TO BEVEL CUT The angle of cut of your saw may be adjusted to any desired setting between zero and 51.5 ° . Note: When making cuts at 51.5 ° blade should be set at full depth of cut, with edge guide screw removed. When making 45 ° bevel cuts, there is a notch in the saw base to help you line up the blade with the line of cut. See Figure 16. When ...

  • Craftsman 315.10849 - page 14

    POSITIVE 0 ° BEVEL STOP See Figure 18. BEVEL ADJUSTMENT WING NUT POSITWEO°BEVELSTOP CARPENTER'SSQUARE ADJUSTMENT SCREW HEX NUT TO ADJUST • Unplug your saw. ,_ WARNING: Failure to unplug your saw could result in accidental starting causing possible serious personal injury. • Loosen wing nut. • Loosen hex nut securing adjustment screw. ? ...

  • Craftsman 315.10849 - page 15

    TO POCKET CUT See Figure 20. ,_1= WARNING: Always adjust bevel setting to zero before making a pocket cut. Attempting a pocket cut at any other setting can result in loss of control of your saw possibly causing serious injury. Adjust the bevel setting to zero, set blade to correct blade depth setting, and swing the lower blade guard up using the lo ...

  • Craftsman 315.10849 - page 16

    ,_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. GENERAL Only the parts shown on parts list, page 19, are intended to be repaired or replaced by the customer. All other parts represent an important part of the double insulation system and should be service ...

  • Craftsman 315.10849 - page 17

    17 ...

  • Craftsman 315.10849 - page 18

    CRAFTSMAN CIRCULAR SAW - MODEL NUMBER 315.108490 SEE NOTE "A" PAGE 19 , 18 ...

  • Craftsman 315.10849 - page 19

    I CRAFTSMAN CIRCULAR SAW - MODEL NUMBER 315.108490 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your CIRCULAR SAW or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS I PARTS LIST Key Part No. Number 1 982523-001 2 969858-001 3 999637 ...

  • Craftsman 315.10849 - page 20

    For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOME sM Anytime, day or night (1-800-469-4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anytime, ...

Fabbricante Craftsman Categoria Saw

I documenti che otteniamo dal fabbricante del dispositivoCraftsman 315.10849 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Craftsman
- manuali per l’uso 315.10849
- schede prodotto Craftsman
- opuscoli
- o etichette energetiche Craftsman 315.10849
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Craftsman 315.10849.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Craftsman 315.10849, manuali di manutenzione, brevi manuali o manuali utente Craftsman 315.10849. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Craftsman 315.10849.

Manuali per l’uso simili

Manuale completo del dispositivo Craftsman 315.10849, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Craftsman 315.10849 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Craftsman 315.10849.

Il manuale per l’uso completo Craftsman, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Craftsman 315.10849 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Craftsman 315.10849, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Craftsman 315.10849 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Craftsman 315.10849 - che ci dovrebbe aiutare nei primi passi durante l'uso Craftsman 315.10849
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Craftsman 315.10849
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Craftsman 315.10849 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Craftsman 315.10849?

Utilizza il modulo sottostante

Se non hai risolto il problema con Craftsman 315.10849 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Craftsman 315.10849 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)