Manuale per l’uso Kenmore 415.165059

28 pagine 11.78 mb
Scarica

Vai alla pagina of 28

Summary
  • Kenmore 415.165059 - page 1

    Use and Care Guide ® Liquid Propane Gas Grill Kenmore Model No. 415.16505900 Kmart item No. 640-t 75289tt5 This Grill is for Outdoor Use Only • Read and follow all Safety, Assembly, and Use and Care instructions in this Guide before assembling and cooking with this grill. • Failure to follow all instructions in this Use and Care Guide may lead ...

  • Kenmore 415.165059 - page 2

    if you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. Open lid. 4. if odor continues, keep away from the appliance and immediately call your gas supplier or your fire department. 1. Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance. 2. An LP Tank not conne ...

  • Kenmore 415.165059 - page 3

    For Your Safety ...................................... 2 Grill Service Center ................................... 2 Product Record Information ............................ 2 Safety Symbols ...................................... 2 Installation Safety Precautions .......................... 2 Kenmore Elite Grill Warranty ........................... 3 ...

  • Kenmore 415.165059 - page 4

    LP Tank • NEVER store a spare LP cylinder under or near the appliance or in an enclosed area. • Never fill a cylinder beyond 80% full. • If the information in two points above is not followed exactly, a fire causing death or serious injury may occur. • An over filled or improperly stored cylinder is a hazard due to possible gas release from ...

  • Kenmore 415.165059 - page 5

    LP Tank Exchange •Many retailers that sell grills offer you the option of replacing your empty LP tank through an exchange service. Use only those reputable exchange companies that inspect, precision fill, test and certify their cylinders. Exchange your tank only for an OPD safety feature-equipped tank as described in the "LP Tank" sect ...

  • Kenmore 415.165059 - page 6

    Hold coupling nut and regulator as shown for proper connection to LP tank valve. Leak Testing Valves, Hose and Regulator 1.Turn all grill control knobs to OFF. 2.Be sure regulator is tightly connected to LP tank. 3.Completely open LP tank valve by turning OPD hand wheel counterclockwise. If you hear a rushing sound, turn gas off immediately. There ...

  • Kenmore 415.165059 - page 7

    zL zL For Safe Use Of Your Grill And To Avoid Serious Injury: *Do not let children operate or play near grill. • Keep grill area clear and free from materials that burn. • Do not block holes in bottom or back of grill. •Check burner flames regularly. • Use grill only in well-ventilated space. NEVER use in enclosed space such as carport, gar ...

  • Kenmore 415.165059 - page 8

    Main burner ignitor Lighting A Do not lean over grill while lighting. 1. Open lid during lighting. 2. Turn ON valve from source or tank. 3. Push and turn Ignition Burner control knob to _ HI and immediately press and hold Electronic Ignition button. 4. If ignition does NOT occur in 5 seconds, turn Left Burner control knob OFF, wait 5 minutes, and r ...

  • Kenmore 415.165059 - page 9

    Turning Grill Off •Turn all knobs to OFF position. Turn LP tank off by turning OPD hand wheel clockwise to a full stop. Ignitor Check •Turn gas off at LP tank. Press and hold ignitor button. "Click" should be heard and spark seen each time between collector box or burner and electrodes. See "Troubleshooting" if no click or s ...

  • Kenmore 415.165059 - page 10

    Cleaning the Burner Assembly Follow these instructions to clean and/or replace parts of burner assembly or if you have trouble igniting grill. 1. Turn gas off at control knobs and LP cylinder. 2. Remove cooking grate and heat tent. 3. Under grill remove grease cup, disconnect ignitor wire from burner. 4. Inside grill remove burner assembly (A), cle ...

  • Kenmore 415.165059 - page 11

    1 2 UPPER SUPPORT, F/ LEGS 80009811 2 1 LEG (WHEEL), LEFT, FRONT, 80009831 CURVED 3 1 LEG (WHEEL), LEFT, BACK, 80009830 STRAIGHT 4 1 SIDE BRACE F/TANK 80009815 RETAINER BRACKET 5 2 BRACKET, TANK SUPPORT 80009834 6 1 LEG, RIGHT, FRONT, CURVED 80009819 7 1 LEG, RIGHT, BACK, STRAIGHT 80009822 8 2 LEG EXTENDER, PLASTIC 80009820 9 1 FRONT PANEL MAGNET 8 ...

  • Kenmore 415.165059 - page 12

    47 52 46 43 39 30,,,,_ _ 25,._ 36 15 14 38,,_ _,2 24 23 31 11 12 °464722309 °464722509 ...

  • Kenmore 415.165059 - page 13

    f g Left Leg i Place one upperleg as shown. NOTE: Left front and left back legs do not have leg extenders. In front, attach upperleg, side brace and left front leg (curve) with #10-24x1-1/4" screw and #10-24flange nut. Tighten screws. In back, attach upper leg, side brace and left back leg (straight) with #10-24x1-1/4"screw and #10-24flan ...

  • Kenmore 415.165059 - page 14

    Upper and lower Front Panel and Top brace j Lay front legs down on the floor. Fit upper front panel between legs. Attach with 2" hinge pins and hitch pins. iAttach lower front panel with #10-24x2" machine screws and #10-24 flange nuts. Attach top brace with #10-24x2" machine screws and #10-24 flange nuts. #10-24 Flange Nut Qty. 8 Rig ...

  • Kenmore 415.165059 - page 15

    Tank Exclusion Hank tank exclusion wires onto lower front panel brackets, attach other ends to back brace with #8-32X3/8" sheet metal screws. #8-32X3/8" Sheet Metal Screw Qty.2 BackBrace Wheels Turn assembly upside down. i_ Insert axle rod through wheel, legs and other wheel. Attach with a wheel bushing and hitch pin. Axle Rod Wheel Hitch ...

  • Kenmore 415.165059 - page 16

    Control Panel and Firebox Support _] Stand cart upright. In front, fit control panel between left and right legs. Insert #10-24x2" machine screws to hold panel in place. Place upper firebox supports onto screws making sure angle side is facing the front and attach with # 10-24 flange nuts. In back, attach upper firebox support with #10-24x2&qu ...

  • Kenmore 415.165059 - page 17

    Heat Shield Attach heat shield with #10-24xl/2" machine screws and #10-24 flange nuts. Tank Retainer Insert tank retainer into side brace and secure with #10-24x3/8" wing screw. #10-24xl/2" Machine Screw Qty.2 #10-24 Flange Nut Qty. 2 eat shield #10-24x3/8" Wing Screw Qty.1 ........... #10-24x3/8" Wing Screw Tank retainer . ...

  • Kenmore 415.165059 - page 18

    Burner and Firebox and Control Knobs Place burner assembly into firebox. Fasten the burner assembly to the firebox using 5x15 fiber washers and #10-24xl/2" machine screws (A). i Inside firebox, insert heat diffuser supports with 5x15 fiber washers to firebox through sides of firebox, then secure with #10-24 flange nuts on outside of firebox (A ...

  • Kenmore 415.165059 - page 19

    Right Side Shelf and Side Burner Support Shelf I ] Attach mounting brackets to Right Side Shelf with #8-32x3/8" sheet metal screws and side shelf bushings (A). Note: Do not overtighten the screws. Insert mounting brackets into Side Burner Shelf Support, and secure with #10-24x1/2" machine screws (B). ;_ ] Attach Right Side Shelf and Side ...

  • Kenmore 415.165059 - page 20

    Sideburner [ Attach sideburner valve with #8-32x3/8" machine screws. Attach sideburner pan with #8-32x3/8" sheet metal screws and 5x9 fiber washers (A). Place sideburner into shelf (B). Make sure valve is inside sidebumer tube (C). Attach sideburner with #8-32 wing nut and 5x9 fiber washer (B). Hook burner clip to sideburner tube and arou ...

  • Kenmore 415.165059 - page 21

    Lower Hinges [ Attach lower hinges to back of firebox using #10-24xl/2" machine screws, 5x15 fiber washers and #10-24 flange nuts. The center flat portion of the hinge should be at the bottom (see inset). #10-24xl/2" Machine Screw Qty.4 Center flat portion of hinge on bottom 5x15 Fiber Washer Qty.8 #10-24 Flange Nut Qty. 4 Lid Handle and ...

  • Kenmore 415.165059 - page 22

    Attach Lid Place lid assembly onto firebox, aligning hinges. Hinges on lid fit inside hinges on firebox. Secure using two hinge pins and hitch pins. Hinge Pin Qty.2 Hitch Pin Qty.2 Heat Diffuser and Cooking Grate [ Place heat diffuser onto heat diffuser support. Place cooking grate into firebox. Cooking Grate diffuser 22,464722309,464722509 ...

  • Kenmore 415.165059 - page 23

    Swing Away Insert ends of Swing Away pivot wire into holes in sides of grill lid. Insert ends of Swing Away leg wire into holes in sides of firebox. NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires are on top, Swing Away is installed upside-down. Swing Away Grease Cup Hang grease c ...

  • Kenmore 415.165059 - page 24

    LP Tank Tank collar opening must face to front of grill. Loosen wing nut from tank retainer bracket. Set bottom of tank into notches of tank bracket. Place tank retainer bracket onto tank collar and tighten wing nut. LP CYLINDER IS SOLD SEPARATELY. Fill and leak check the cylinder before attaching to grill and regulator (see Use & Care section) ...

  • Kenmore 415.165059 - page 25

    EMERGENCIES; if a gas leak cannot be stopped, or a fire occurs due to gas leakage, call the fire department. Gas leaking from cracked/cut/burned hose. Gas leaking from LP cylinder. Gas leaking from LP cylinder valve. Gas leaking between LP cylinder and regulator connection. Fire comingthrough controlpanel. Grease fire or continuous excessive flames ...

  • Kenmore 415.165059 - page 26

    Troubleshooting (continued) ELECTRONIC IGNITION: • No spark, no ignition noise. • No spark, some ignition noise. • Sparks, but not at electrode or at full strength. Burner(s) will not light using ignitor. (See Electronic Ignition Troubleshooting also) Burner(s) will not match light. Sudden drop in gas flow or low flame. Flames blow out, Flare ...

  • Kenmore 415.165059 - page 27

    Troubleshooting - Electronic Ignition ,Battery not installed properly. SECTION I No sparks appear at any electrodes when controlknob turned to _" ; no noise can be heardfrom spark module. SECTION II No sparks appear at any electrodes when controlknob turned to ; noise can be heardfrom spark •Check battery orientation. •Install battery (mak ...

  • Kenmore 415.165059 - page 28

    iiiiiiiiiiiiiiiiiiiiiiiiii_ _¸¸ iiiiiiiiiiiiiiiiiiiiii_ '_ iiiiiiiiiiiiiiiiiiiii_ _ iiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiii iiiiii ...

Fabbricante Kenmore Categoria Gas Grill

I documenti che otteniamo dal fabbricante del dispositivoKenmore 415.165059 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Kenmore
- manuali per l’uso 415.165059
- schede prodotto Kenmore
- opuscoli
- o etichette energetiche Kenmore 415.165059
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Kenmore 415.165059.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Kenmore 415.165059, manuali di manutenzione, brevi manuali o manuali utente Kenmore 415.165059. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Kenmore 415.165059.

Manuali per l’uso simili

Manuale completo del dispositivo Kenmore 415.165059, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Kenmore 415.165059 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Kenmore 415.165059.

Il manuale per l’uso completo Kenmore, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Kenmore 415.165059 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Kenmore 415.165059, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Kenmore 415.165059 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Kenmore 415.165059 - che ci dovrebbe aiutare nei primi passi durante l'uso Kenmore 415.165059
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Kenmore 415.165059
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Kenmore 415.165059 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Kenmore 415.165059?

Utilizza il modulo sottostante

Se non hai risolto il problema con Kenmore 415.165059 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Kenmore 415.165059 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)