Manuale per l’uso Transition Networks SSDTF1022-105

9 pagine 0.7 mb
Scarica

Vai alla pagina of 9

Summary
  • Transition Networks SSDTF1022-105 - page 1

    Installation . . . . . . . . . . . . . . . . . . . . .3 Operation . . . . . . . . . . . . . . . . . . . . . .9 Cable Specifications . . . . . . . . . . . . .10 Technical Specifications . . . . . . . . . .12 Troubleshooting . . . . . . . . . . . . . . . .13 Compliance Information . . . . . . . . .16 * Typical maximum cable distance. (Actual distance ...

  • Transition Networks SSDTF1022-105 - page 2

    2 SSDTF10xx-10x (TX) = transmit (RX) = receive * Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network. ** SSDTF1029-105 and -106 are intended to be installed in the same network where one is the local device and the other is the remote device. *** SSDTF1029-107 and -108 are intended to be ins ...

  • Transition Networks SSDTF1022-105 - page 3

    4 SSDTF10xx-10x Installation -- Continued Set the loop-back switch Hardware mode: The loop-back switch is located on the front panel of the device and is used for installation and network debugging procedures. To set the switch, use a small flat-blade screwdriver or a similar device (see the drawing to the right). CL (Copper loop-back) Enable loop- ...

  • Transition Networks SSDTF1022-105 - page 4

    6 SSDTF10xx-10x Installation -- Continued Settings for T1 configuration (right switch set, SW 1) T1/long-haul signal Use switches 3 and 4 on the left switch set to select T1/long-haul signal (see the drawing below). Use switches 1 and 2 on the right switch set to select the proper network cable settings. The drawing below lists the four options. -1 ...

  • Transition Networks SSDTF1022-105 - page 5

    8 SSDTF10xx-10x Installation -- Continued Install the copper cable 1. Locate or build twisted-pair copper cables that are compliant with the specifications on page 11 with RJ-45 connectors at both ends. 2. Ensure that the MDI/MDI-X switch is set according to the network conditions (see page 3) . 3. Connect the RJ-45 connector at one end of cable to ...

  • Transition Networks SSDTF1022-105 - page 6

    10 SSDTF10xx-10x Cable Specif ications Fiber cable Single mode fiber (recommended): 9 µm Multimode fiber (recommended): 62.5/125 µm Multimode fiber (optional): 100/140, 85/140, 50/125 µm SSDTF1011-105 850 nm multimode Fiber Optic Transmitter Power: min: -19.0 dBm max: -14.0 dBm Fiber Optic Receiver Sensitivity: min: -32.5 dBm max: -14.0 dBm Link ...

  • Transition Networks SSDTF1022-105 - page 7

    12 SSDTF10xx-10x T echnical Specifications For use with Transition Networks Model SSDTF10xx-10x or equivalent Standards: Emissions: CISPR A; Telecordia TR-NWT-001089 (designed to meet; NOT tested) ; FCC Part 68; T1/E1 Physical layer: ITU-T, ANSI, AT&T, and ETSI; European Technical Standard: TBR 12; British Technical Publication: PD 7024 : 1994 ...

  • Transition Networks SSDTF1022-105 - page 8

    14 SSDTF10xx-10x 4. Is data transfer failing? YES • Verify the local copper connection by starting a local copper loop-back (hardware mode: set the loop-back switch on the local device to “CL”, software mode: enter the local copper loop-back command) and then use a bit error test unit to run a bit error test. • Verify the local fiber connec ...

  • Transition Networks SSDTF1022-105 - page 9

    Compliance Information CISPR22/EN55022 Class A + EN55024 CE Mark FCC regulations This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial ...

Fabbricante Transition Networks Categoria Network Card

I documenti che otteniamo dal fabbricante del dispositivoTransition Networks SSDTF1022-105 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Transition Networks
- manuali per l’uso SSDTF1022-105
- schede prodotto Transition Networks
- opuscoli
- o etichette energetiche Transition Networks SSDTF1022-105
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Transition Networks SSDTF1022-105.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Transition Networks SSDTF1022-105, manuali di manutenzione, brevi manuali o manuali utente Transition Networks SSDTF1022-105. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Transition Networks SSDTF1022-105.

Manuale completo del dispositivo Transition Networks SSDTF1022-105, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Transition Networks SSDTF1022-105 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Transition Networks SSDTF1022-105.

Il manuale per l’uso completo Transition Networks, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Transition Networks SSDTF1022-105 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Transition Networks SSDTF1022-105, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Transition Networks SSDTF1022-105 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Transition Networks SSDTF1022-105 - che ci dovrebbe aiutare nei primi passi durante l'uso Transition Networks SSDTF1022-105
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Transition Networks SSDTF1022-105
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Transition Networks SSDTF1022-105 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Transition Networks SSDTF1022-105?

Utilizza il modulo sottostante

Se non hai risolto il problema con Transition Networks SSDTF1022-105 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Transition Networks SSDTF1022-105 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)