Italiano dropdown-ico

Manuale per l’uso Foundry Networks 250

64 pagine 1.14 mb
Scarica

Vai alla pagina of 64

Summary
  • Foundry Networks 250 - page 1

    Foundr y Ir onP oint 250 Installation Guide 4980 Great Amer ica P ar kwa y Santa Clara, CA 95054 T el 408.207.1700 www .f o undr ynetworks.com A ugu st 2007 ...

  • Foundry Networks 250 - page 2

    Cop y righ t © 2007 F o undr y Networks, Inc. All r ights reser ved. No par t of this work may be re produced in an y f or m or by any mea ns – graphic , electronic or mechanical, includin g photocopying, r ecording, taping or storage in an information retrie val system – without prior written permission of the copyright ow ner . The trad emar ...

  • Foundry Networks 250 - page 3

    A u gust 2007 © 2007 Foundry Networks, Inc. iii Compliances FCC - Class B This equipment has be en tested and found to comply with th e limits for a Class B digital device , pursu ant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Th is equipment ...

  • Foundry Networks 250 - page 4

    Foundry IronPoint 250 Instal lation Guide iv © 2007 Foundry Networks, Inc. A ugust 20 07 FCC Antenna Usage and T ransmit P ower T o comply with FCC/Canada telecommunicati on regulati on, the conducted output power of this transmitter , when use with each specific antenna supplie d, cannot e xceed the maximum limit indicated in the following tables ...

  • Foundry Networks 250 - page 5

    Compliances A u gust 2007 © 2007 Foundry Networks, Inc. v Industry Canada - Class B This digital apparatus does not exceed the Class B limits f or radio noise emissio ns from digital apparatus as set out in the interf e rence-causing equipment sta ndard enti tled “Digital Apparatus, ” ICES-003 of Industr y Canada. Cet appareil numérique re sp ...

  • Foundry Networks 250 - page 6

    Foundry IronPoint 250 Instal lation Guide vi © 2007 Foundry Networks, Inc. A ugust 20 07 EC Decl aration of Conformity Contact F oundr y Networks at: F oun dr y Networks, Inc. 4980 Great Amer ica P ar kwa y Santa Clara, CA 95054 Marking by the abov e symb ol indicates compliance with th e Essential Requirements of the R&TTE Directive of the Eu ...

  • Foundry Networks 250 - page 7

    Compliances A u gust 2007 © 2007 Foundry Networks, Inc. vii Operation Using 5 GHz Channels in the Eur opean Comm unity The user/installer must use the provi ded configuration utility to check the current channel of operation and make necessar y configuration changes to ensure operation occu rs in conformance with European Na tional spectr um usage ...

  • Foundry Networks 250 - page 8

    Foundry IronPoint 250 Instal lation Guide viii © 2007 Foundry Networks, Inc. A ugust 20 07 A ustralia/New Zealand AS/NZS 4771 Contact F oundr y Networks at: F oun dr y Networks, Inc. 4980 Great Amer ica P ar kwa y Santa Clara, CA 95054 Safety Compliance P ower Cord Safety Please read the following safety inf ormation carefully before installing th ...

  • Foundry Networks 250 - page 9

    Compliances A u gust 2007 © 2007 Foundry Networks, Inc. ix V euillez lire à fond l' information de la sécuri té suivante av ant d'in stalle r le access point: A VERTISSEMENT : L ’installation et la dépose de ce gr oupe doiv ent être confiés à un personne l qualifié. • Ne branchez pas votre appareil sur une prise secteur (a li ...

  • Foundry Networks 250 - page 10

    Foundry IronPoint 250 Instal lation Guide x © 2007 Foundry Networks, Inc. A ugu st 2007 Bitte unbedingt vor dem Einbauen des acces s point die folgenden Sicherheit sanweisungen durchlese n: WARNUNG: Die Installatio n und der Ausbau des Geräts darf nur durch F a chpersona l erf o lgen. • Das Gerät sollte nicht an eine ungeerdete We chselstromst ...

  • Foundry Networks 250 - page 11

    A u gust 2007 © 2007 Foundry Ne tworks, Inc. xi Contents Compliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Chapter 1. About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Foundry Networks 250 - page 12

    Foundry IronPoint 250 Installation Guide xii © 2007 Foundry Networks, Inc. A ugust 20 07 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Foundry Networks 250 - page 13

    Contents A u gust 2007 © 2007 Foundry Networks, Inc. xiii Crossover Wir ing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 Console Port Pin Assignmen ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3 Wiring Map f or Serial ...

  • Foundry Networks 250 - page 14

    Foundry IronPoint 250 Installation Guide xiv © 2007 Foundry Networks, Inc. A ugust 20 07 ...

  • Foundry Networks 250 - page 15

    August 2007 © 2007 Foundry Networks, Inc. 1-1 Chapter 1 About This Guide The IronP oint™ 250 Access P oint is a device that allows wireles s clients to co nnect to your enterpr ise network. It is a full-f eatured access point that can be ma naged as a single device . This guide presents the pr ocedures for installing the IronP oint™ 250 Access ...

  • Foundry Networks 250 - page 16

    Foundry IronPoint 250 Instal lation Guide 1-2 © 2007 Foundry Networks, Inc. August 2007 Web Access P oint y our browser to the kp .f oundr ynet.com to access the F oundr y Knowledge P or tal. Note: Check with yo ur sales acco unt represe ntative to de termine how to obtain a valid user n ame and password for t he Foundry Knowledge Portal. E-mail A ...

  • Foundry Networks 250 - page 17

    August 2007 © 2007 Foundry Networks, Inc. 2-1 Chapter 2 About the IronPoint 250 Overview F oundr y’ s IronP oint 250 is an IEEE 802.11 a/g enter prise wireless access point that pro vides high- speed data comm unications between the wired L AN and fix ed, por table or m obile devices equip ped with an 802.11a, 802.11b , or 802.11g wireles s netw ...

  • Foundry Networks 250 - page 18

    Foundry IronPoint 250 Instal lation Guide 2-2 © 2007 Foundry Networks, Inc. August 2007 Radio Characteristics The IEEE 802.11a/ g standard uses a r adio modulation technique kno wn as Or thogonal F requency Division Multiplexing (OFDM) , and a shared collision domain (CSMA/CA). It operates at the 5 GHz Unlicensed National Inf ormation Infrastructu ...

  • Foundry Networks 250 - page 19

    About the IronPoint 250 August 2007 © 2007 Foundry Networks, Inc. 2-3 Description of Hardware Ethernet Port The access point has one 10BASE-T /100BASE-TX RJ-45 Ether net por t th at can be attached directly to a 10BASE-T/100BASE-TX/1000BASE- T wired network. The wired ne twork must conf orm to the IEEE 802.3-2005 sp ecifications. The Ethernet por ...

  • Foundry Networks 250 - page 20

    Foundry IronPoint 250 Instal lation Guide 2-4 © 2007 Foundry Networks, Inc. August 2007 Figure 2-2. An Example of an Optional Extern al Antenna ...

  • Foundry Networks 250 - page 21

    About the IronPoint 250 August 2007 © 2007 Foundry Networks, Inc. 2-5 Status LEDs The access point includes f our status LED indica tors, as de scr ibed in the f ollowing figure and tab le. Figure 2-3. Status LEDs Status LEDs LED Status Description Status On Green Indicates that power is being supplied and the system is working normally. Flashing ...

  • Foundry Networks 250 - page 22

    Foundry IronPoint 250 Instal lation Guide 2-6 © 2007 Foundry Networks, Inc. August 2007 Security Slot The access point includes a K ensington security slot on the rear panel. Y ou can pre ve nt unauthorized remo val of the access poin t in se vera l ways: b y wrapping F oundry’ s locking clamp (loc k not provided) or by using a K e nsington sec ...

  • Foundry Networks 250 - page 23

    About the IronPoint 250 August 2007 © 2007 Foundry Networks, Inc. 2-7 Features and Benefits Connectivity ◆ 54 Mbps wireless interf ace supports up to 64 mobile users ◆ Local network connection via 10/100 Mbps Ethernet port ◆ IEEE 802.11a, 802.1 1b, and 802.11g co mpliant on the wir eless interfaces ◆ IEEE 802.3-2005 comp liant on the Ether ...

  • Foundry Networks 250 - page 24

    Foundry IronPoint 250 Instal lation Guide 2-8 © 2007 Foundry Networks, Inc. August 2007 ...

  • Foundry Networks 250 - page 25

    August 2007 © 2007 Foundry Networks, Inc. 3-1 Chapter 3 Network Planning Network Topologies The IronP oint 250 supports an integrate d configurat ion with 10/100 Mbps Eth e rnet LANs. One or more access points can be conf igured as: • Infrastru cture for wireless LANs • Infrastructure wireless LAN f or roaming wireless PCs The 802.11b and 802. ...

  • Foundry Networks 250 - page 26

    Foundry IronPoint 250 Instal lation Guide 3-2 © 2007 Foundry Networks, Inc. August 2007 Infrastructure Wireless LAN The IronP oint 250 is designed to pro vide access to a wired LAN for wireless workstations. An integr ated wired/wireless LAN is called an Infrastructure configuratio n. A Basic Ser vice Set (BSS) consists of a group of wire less PC ...

  • Foundry Networks 250 - page 27

    Network Planning August 2007 © 2007 Foundry Networks, Inc. 3-3 continuous cov erage area is crea ted, wireless users wit hin this ESS can roam freely . All wireless network cards and access points w ithin a spec ific ESS must be config ured with the same SSID . Figure 3-2. Wireless LAN Roaming <BSS2> Seamless Roaming <ESS> <BSS1> ...

  • Foundry Networks 250 - page 28

    Foundry IronPoint 250 Instal lation Guide 3-4 © 2007 Foundry Networks, Inc. August 2007 ...

  • Foundry Networks 250 - page 29

    August 2007 © 2007 Foundry Networks, Inc. 4-1 Chapter 4 Installing the IronPo int 250 Access Point This section presents proc edures f or installing the Ir onP oint 250 access point. Unpacking the Iron Point Access Point Unpac k the IronP oint 250 access point a nd make sure th e f ollowing components are inclu ded in the box: • One IronPoint 25 ...

  • Foundry Networks 250 - page 30

    Foundry IronPoint 250 Instal lation Guide 4-2 © 2007 Foundry Networks, Inc. August 2007 CAUTION: When mounting the access point on a w all or suspended ceiling, use P oE po wer ONL Y . Do not use the A C pow er adapter . Note: For safety reasons, make su re ventilation holes on the access point are positioned horizontally, not vertically. Allow at ...

  • Foundry Networks 250 - page 31

    Installing the IronPoint 250 Access Point August 2007 © 2007 Foundry Networks, Inc. 4-3 access point must be moun ted with the RJ-45 cable connec tor or iented u pwards to ensure proper operat ion. Do the f ollowing to attach the access point to th e wall using th e mounting brack et: 1. Using the mount ing brac ket, mark the p osition of the f ou ...

  • Foundry Networks 250 - page 32

    Foundry IronPoint 250 Instal lation Guide 4-4 © 2007 Foundry Networks, Inc. August 2007 ax es, prov iding the same co verage . For e xample , if the access point is mounted on a horizontal surf ace, both antennas sh ould be positioned pointing v er tically up to pro vide optimum cov erage. Attaching the Access Poin t to a Suspended Ceiling T o mou ...

  • Foundry Networks 250 - page 33

    Installing the IronPoint 250 Access Point August 2007 © 2007 Foundry Networks, Inc. 4-5 Figure 4-4. Attaching the Brack et to a Suspended Ceiling Locking the Access Point T o prev ent unauthorized remo val of the access point, y ou can use a K ensington Slim MicroSav er security cable (not included) to attach the access point to a fixed object. In ...

  • Foundry Networks 250 - page 34

    Foundry IronPoint 250 Instal lation Guide 4-6 © 2007 Foundry Networks, Inc. August 2007 specific ante nna and ca ble combina tions. For this reason, yo u must con sult with a professiona l installer who is trained in RF installation and knowledgeable in the local regulations prior to connecting an external ante nna to your wireless radi o product. ...

  • Foundry Networks 250 - page 35

    Installing the IronPoint 250 Access Point August 2007 © 2007 Foundry Networks, Inc. 4-7 3. On your PC console application configure the f ollowing comm unication para meters: • 9600 bits per second • 8 data bits • No parity • 1 stop bits • No Flow Control 4. Connect the p ower adapte r cab le to the 48V DC po wer soc ket on th e access p ...

  • Foundry Networks 250 - page 36

    Foundry IronPoint 250 Instal lation Guide 4-8 © 2007 Foundry Networks, Inc. August 2007 attached to the IronP o int-FES, the s witc h assigns the predef ined IP addr ess, subnet mask , and def ault gatewa y to t he access po int with th e matching MAC address. The IronP oint 250 is shipped with the ADC fe ature enabled. If you w ant to use ADC to ...

  • Foundry Networks 250 - page 37

    Installing the IronPoint 250 Access Point August 2007 © 2007 Foundry Networks, Inc. 4-9 US-UNITED_STATES, UY-URUGUAY, VE-VENEZUELA, VN-VIETNAM 5. Configure the TCP/IP a ddress. The def ault IP address f or the access poin t is 169.254.1.1 with a 255.255.0.0 sub net mask and a def ault gatew ay of 169. 254.1.254. T o change the access point's ...

  • Foundry Networks 250 - page 38

    Foundry IronPoint 250 Instal lation Guide 4-10 © 2007 Foundry Networks, Inc. August 2007 9. Connect the other end of the cab le to the network subnet f or which the access point w as progr ammed. 10. P ower up the access point. It can now be man aged using its command line interf ace (CLI) or We b i n t e r fa c e . Once the access point is set up ...

  • Foundry Networks 250 - page 39

    A u gust 2007 © 2007 Foundry Networks, Inc. 5-1 Chapter 5 Making a Network Connection Connecting to a Network Device The IronP oint 250 is designed to conne ct a wired Ether net netwo r k to wireless clients. It can be connected to any Ether net ne twork device, such as a hu b or switch. CAUTION: The IronP oint 250 is only intended fo r in stallat ...

  • Foundry Networks 250 - page 40

    Foundry IronPoint 250 Instal lation Guide 5-2 © 2007 Foundry Networks, Inc. August 2007 Connecting to a Switch, Hub, PC, or Server 1. Attach one end of a twisted -pair cable segment to the ne twork device’ s RJ-45 connector . Figure 5-1. Connect ing to a Network Device 2. Attach the othe r end of the cable segme nt to the Ethernet por t on the a ...

  • Foundry Networks 250 - page 41

    A u gust 2007 © 2007 Foundry Networks, Inc. A-1 Appendix A Troubleshooting Diagnosing Access Point Indicators Installation V er ify that all system component s hav e been properly installed. If one or more compon ents appear to be malfunctioning ( such as the power cord or network cab ling), test them in an alternate envir onment where you are sur ...

  • Foundry Networks 250 - page 42

    Foundry IronPoint 250 Installation Guide A-2 © 2007 Foundry Networks, Inc. August 2007 In-Band Access If the access poi nt cannot be configu red using the CLI via T elnet or SSH v2, a Web browser using H T T P or HT T P S, o r S N M P v 2 o r v 3 s o f t wa r e , c h e c k the follo w ing items be f ore you contact T echnical Suppor t. If the ac c ...

  • Foundry Networks 250 - page 43

    Troubleshooti ng A u gust 2007 © 2007 Foundry Networks, Inc. A-3 • Check the configura t ion matrix for the most commonly used authe ntication and encrypt ion combinations in the Quick Installation and Ge tting Started Guide to ensur e that the a c cess point is correctly configu red. Lost Password The only wa y to recover a lost password is by ...

  • Foundry Networks 250 - page 44

    Foundry IronPoint 250 Installation Guide A-4 © 2007 Foundry Networks, Inc. August 2007 ...

  • Foundry Networks 250 - page 45

    A u gust 2007 © 2007 Foundry Networks, Inc. B-1 Appendix B Cables Specifications Twisted-Pair Cable and Pin Assignments CAUTION: DO NOT plug a phone jack connector into an y RJ- 45 port. Use only twisted-pair cables with RJ-45 connectors t hat conform with FCC sta ndards. F or 100BASE-TX/10BASE-T co nnections, a twisted-pair cable m u st hav e two ...

  • Foundry Networks 250 - page 46

    Foundry IronPoint 250 Instal lation Guide B-2 © 2007 Foundry Networks, Inc. August 2007 100BASE-TX/10BASE-T Pin Assignments Use unshielded twisted-pair (UTP) or shielded twisted- pair (STP) cab le f o r RJ-45 connecti ons: 100-ohm Cate gor y 3 or better cab le for 10 Mbps connections , or 100-oh m Category 5 or better cable f o r 100 Mbps conne ct ...

  • Foundry Networks 250 - page 47

    Cables A u gust 2007 © 2007 Foundry Networks, Inc. B-3 Figure B-3. Crosso ver Wiring Console Port Pin Assignments The DB-9 serial por t on the IronP oint 250 is used to connect t o the access point f or out-of-band management. The access poin t’ s command-line interf ace can be accessed from a terminal or a PC running a terminal emulation progr ...

  • Foundry Networks 250 - page 48

    Foundry IronPoint 250 Instal lation Guide B-4 © 2007 Foundry Networks, Inc. August 2007 The serial por t’ s configuration requirem ents are as follo ws: • Default Baud ra te—9,600 bps • Character Size —8 Characters • Parity—None • Stop bit—O ne • Data bits—8 ...

  • Foundry Networks 250 - page 49

    A u gust 2007 © 2007 Foundry Networks, Inc. C-1 Appendix C Specifications General Specifications Maxim um Channels 802.11a: US & Canada: 10 (normal mode), 3 (turbo mode ) Ja pan: 4 (nor mal mode), 1 (turbo mo de) ETSI: 4 channels ( nor mal mode), 1 (tur bo mode) T aiwan: 4 (no r mal mode), 1 (tur bo mode) 802.11g: FCC/IC: 1-11 ETSI: 1-13 F ran ...

  • Foundry Networks 250 - page 50

    Foundry IronPoint 250 Instal lation Guide C-2 © 2007 Foundry Networks, Inc. August 2007 5.50 ~ 5.70 GHz Euro pe 5.25 ~ 5.35 GHz (mid dle band) T aiwan 5.725 ~ 5. 825 GHz (high band) T aiw an 802.11b/g: 2.4 ~ 2.483 5 GHz (US, Canada, ETSI) 2.4 ~ 2.497 GHz (J apan) 2.400 ~ 2.4835 GHz (T aiwan) A C P ower supply Input: 100- 240 V A C, 50-60 Hz Output ...

  • Foundry Networks 250 - page 51

    Specific ations A u gust 2007 © 2007 Foundry Networks, Inc. C-3 Radio Signal Certification FCC P ar t 15, Subpar t C - Intentional Radiators 1 5.247, 15.207, 15.407 RSS-210 (Canada) RSS-102 (Canada) EN 300 328, EN 300 893, EN 301 489 (Sections 1-17, as necessary) (Europe) ARIB STD 33 (J apan) ARIB STD 66 (J apan) ARIB STD T71 (Jap an) AS/NZS 4771, ...

  • Foundry Networks 250 - page 52

    Foundry IronPoint 250 Instal lation Guide C-4 © 2007 Foundry Networks, Inc. August 2007 Sensitivity IEEE 802.11a Sensitivity (GHz - dBm) Modulation/Rates 5.15-5.250 5.2 5-5.350 5.50-5.700 5.725-5.825 BPSK (6 Mbps) -88 -88 -88 -88 BPSK (9 Mbps) -87 -87 -87 -87 QPSK (12 Mbps) -86 -86 -86 -86 QPSK (18 Mbps) -83 -83 -83 -83 16 QAM (24 Mbps) -80 -80 -8 ...

  • Foundry Networks 250 - page 53

    Specific ations A u gust 2007 © 2007 Foundry Networks, Inc. C-5 Maximum Distance Tables Important Notice The opera ting range di stances listed in the f ollowing tables ar e for typical en vironments only . Operat ing ranges can va r y consider ably depending on f actors such as local interf erence and barrier composition. It is recommended to do ...

  • Foundry Networks 250 - page 54

    Foundry IronPoint 250 Instal lation Guide C-6 © 2007 Foundry Networks, Inc. August 2007 ...

  • Foundry Networks 250 - page 55

    August 2007 © 2007 Foundry Networks, Inc. D-1 Appendix D Cautions and Warnings The cautions and w ar nings that appear in this man ual are listed below in English, German, F rench, and Spanish. Cautions A caution calls your attention to a possible h azard that can damage equi pment. "V orsicht” weist auf die Gef ahr einer möglichen Beschä ...

  • Foundry Networks 250 - page 56

    Foundry IronPoint 200 Instal lation Guide D-2 © 2007 Foundry Networks, Inc. August 2007 PRECAUCIÓN: No enchufe una clavija de teléfono en un puerto RJ-45. Utilice solamente cables de par trenzado con conect ores RJ-45 que se ajusten a la normat iva FCC. CAUTION: Each wire pair must be attached to the RJ-45 conn ector in a specific orientation. V ...

  • Foundry Networks 250 - page 57

    Cautions and Warnings August 2007 © 2007 Foundry Networks, Inc. D-3 CAUTION: The IronPoint 250 is only inte nded for installation in Enviro nment A as defined in IEEE 802.3af. All inte rconnected equipment must be contained within the same building, including the inte rconnected equi pment's associated LAN connection. VORSICHT: IronPoint 250 ...

  • Foundry Networks 250 - page 58

    Foundry IronPoint 200 Instal lation Guide D-4 © 2007 Foundry Networks, Inc. August 2007 ADVERTENCIA Este producto es adecuad o para su uso en el es pacio aéreo circundante en conformidad con la sección 300-22(c) del National Elec tric Code (Códig o Eléctrico Nacional de EE.UU.) y las secciones 2- 128.12 - 010 (3) y 12 - 100 del Código Eléctr ...

  • Foundry Networks 250 - page 59

    A u gust 2007 © 2007 Foundry Networks, Inc. Glossary-1 Glossary 10BASE-T IEEE 802.3 specification for 10 Mbps Ethernet ov er two pairs of Ca tegory 3 or better UTP cable. 100BASE-TX IEEE 802.3u specificat ion fo r 100 Mbps F ast Ethe rnet over two pairs of Category 5 or better UTP cable . Access Poin t An inter networking device that seamlessly co ...

  • Foundry Networks 250 - page 60

    Foundry IronPoint 250 Instal lation Guide Glossary-2 © 2007 Foundry Networks, Inc. August 2007 Dynamic Host Configuration Protoco l (DHCP) Provides a fr amework f or passing configuration inf or mation to hosts on a TCP/IP netw or k. DHCP is based on the Bootstrap Pr otocol (BOO TP), adding the capability of automatic allocation of reusable networ ...

  • Foundry Networks 250 - page 61

    Glossary A u gust 2007 © 2007 Foundry Networks, Inc. Glossary-3 LED Light emitting diode used f or monitoring a de vice or network condition. Local Area Network (L AN) A group of inter connected computer and suppor t de vices. MAC Address The ph ysical lay er address used to uniquely iden tify network nodes. Power over Ethernet (PoE) A specificati ...

  • Foundry Networks 250 - page 62

    Foundry IronPoint 250 Instal lation Guide Glossary-4 © 2007 Foundry Networks, Inc. August 2007 ...

  • Foundry Networks 250 - page 63

    A u gust 2007 © 2007 Foundry Ne tworks, Inc. Index-1 Index Numerics 100BASE-TX ports 2-3 10BASE-T ports 2-3 A air flow requirements 4-2 antennas, positioning 4-2, 4-3 applications 3-1 infrastructure 3-2 wireless LAN roaming 3-2 B Basic Service Set See BSS bracket, wall mount 4-2 BSS 3-2 C cable crossover B-2 specifications B-1 straight-through B-2 ...

  • Foundry Networks 250 - page 64

    Foundry IronPoint 250 Instal lation Guide Index-2 © 2007 Foundr y Networks, Inc. A ugust 2007 on a desktop or shelf 4-2 N network connections 5-1 topologies 3 -1 network topologies 3-1 infrastructure 3-2 infrastructure for roaming 3-2 null-modem serial cable 2-2 O OFDM 2-2 operating frequency C-1 out-of-band management 2- 2 P password, support 1-2 ...

Fabbricante Foundry Networks Categoria Network Router

I documenti che otteniamo dal fabbricante del dispositivoFoundry Networks 250 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Foundry Networks
- manuali per l’uso 250
- schede prodotto Foundry Networks
- opuscoli
- o etichette energetiche Foundry Networks 250
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Foundry Networks 250.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Foundry Networks 250, manuali di manutenzione, brevi manuali o manuali utente Foundry Networks 250. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Foundry Networks 250.

Manuali per l’uso simili

Manuale completo del dispositivo Foundry Networks 250, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Foundry Networks 250 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Foundry Networks 250.

Il manuale per l’uso completo Foundry Networks, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Foundry Networks 250 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Foundry Networks 250, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Foundry Networks 250 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Foundry Networks 250 - che ci dovrebbe aiutare nei primi passi durante l'uso Foundry Networks 250
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Foundry Networks 250
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Foundry Networks 250 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Foundry Networks 250?

Utilizza il modulo sottostante

Se non hai risolto il problema con Foundry Networks 250 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Foundry Networks 250 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)