Italiano dropdown-ico

Manuale per l’uso Avaya Cajun P550R

162 pagine 0.1 mb
Scarica

Vai alla pagina of 162

Summary
  • Avaya Cajun P550R - page 1

    A vaya P550R/P580/ P880/P882 Multiservice Switch ™ A TM Uplink CLI Refer ence Guide V ersion 2.0 May 2002 ...

  • Avaya Cajun P550R - page 2

    A vaya™ P550R ® /P580/P880/P882 Multiservice Sw itch A TM Uplink CLI Reference Guide, V ersion 2.0 © Copyright A vaya Inc. 2002 ALL RIGHTS RESERVED Printed in USA, March 2002 The products, specifications, and other technica l information re garding the products contained in this document are subject to change without notice. All information in ...

  • Avaya Cajun P550R - page 3

    iii Avaya P550R/P580/P880/P882 Multiser vice Switch ATM Uplink CLI Reference Guide, Version 2.0 T able of Contents vii Overview of the Contents.......................................................... 1-vii Technical Support ............................................. ......................... 1-vii Conventions .................................. ...

  • Avaya Cajun P550R - page 4

    iv Avaya P550R/P580/P880/P882 Multiser vice Switch ATM Uplink CLI Reference Guide, Version 2.0 set network multiport ..................................................... ... 1-21 set network pnni-level....................................................... 1-22 set network prefix ................................................. ............. 1-23 ...

  • Avaya Cajun P550R - page 5

    v Avaya P550R/P580/P880/P882 Multiservice Switch AT M Uplink CLI Referenc e Guide, Version 2.0 set pvc mbs ................................................ ......................... 1-72 set pvc pcr ....... ............................................................... .... 1-73 set pvc port ........................................................ ...

  • Avaya Cajun P550R - page 6

    vi Avaya P550R/P580/P880/P882 Multiser vice Switch ATM Uplink CLI Reference Guide, Version 2.0 show running-config ............................................ ........... 1-122 show startup-config ................................... ...................... 1-123 show version .............................................. ...................... 1-12 ...

  • Avaya Cajun P550R - page 7

    Avaya P550R/P580/P880/P8 82 Multiservice Switch ATM Uplink CLI Reference Gui de, Version 2.0 vii Pr eface This guide explains how to configure and o perate the A vaya Multiservice Switch’ s ™ P580 ® /P882 ® A TM Uplink module (referred to as the A TM Uplink module) using the Command Line Interface (CLI). Overview of the Contents Command Line ...

  • Avaya Cajun P550R - page 8

    viii Avaya P550R/P580/P880/P882 Mu ltiservice Switch ATM Uplink CLI Reference Gu ide, Version 2.0 T ext Conventions This document uses the following text conventions: Convention Represents Examples User Input User entered text. T o enable th e network, enter: set network enable Boldface T ext Menu command, keyword to be acted upon, or button name. ...

  • Avaya Cajun P550R - page 9

    Avaya P550R/P580/P880/P882 Multis ervice Swit ch ATM Upli nk CLI Reference, Version 2.0 ix Related Documentation This section provides information on related documentation, including: ■ Online Documentation ■ Documentation Feedback ■ A TM Forum - http://atmforum.com Online Documentation A vaya maintains copies of technical documentation on th ...

  • Avaya Cajun P550R - page 10

    x Avaya P550R/P580/P880/P882 Mu ltiservice Switch ATM Uplink CLI Reference Gu ide, Version 2.0 ...

  • Avaya Cajun P550R - page 11

    Avaya P550R/P580/P880/P8 82 Multis ervice Switch ATM Uplink CLI Reference Gu ide, Version 2.0 1-1 1 A vaya A TM Uplink Module CLI Commands Overview This chapter describes: ■ Accessing/Exiting the Command Modes ■ Command Syntax Conventions ■ Basic Functions ■ Accessing the A TM Uplink CLI ■ P580R Supervisor Commands ■ A TM Uplink Command ...

  • Avaya Cajun P550R - page 12

    1-2 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 Command Syntax Conventions T able 1-2 describes the command syntax conventions. T able 1-2. Command Syntax Conventions Privileged The Privileged mode contains commands from the User mode and the commands to set operating parameters. From the U ...

  • Avaya Cajun P550R - page 13

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-3 No Form of Commands Many A TM Uplink CLI commands have a no form. In general, the no form deletes a feature/functi on or restores a default. Command Line History Keys The history buffer stores the last 2 0 commands yo ...

  • Avaya Cajun P550R - page 14

    1-4 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 Basic Functions Enter a question mark ( ? ) at the system prompt to display the commands in a mode. For other information, use the commands in Ta b l e 1 - 4 . T able 1-4. Basic Functions Command Description Example partial-comma nd? (First to ...

  • Avaya Cajun P550R - page 15

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-5 Accessing/Exiting the A TM Uplink CLI T o access the A TM Uplink CLI, you must first access the A vaya Multiservice Swith’ s Supervisor console. There are two wa ys to access the Supervisor console: ■ Using a seri ...

  • Avaya Cajun P550R - page 16

    1-6 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 * Note: A serial interface should be used to configure an IP address and user account for the switch. Default accounts are: • root •d i a g • manuf 1. Obtain the name and password for the user account you will be using. 2. At the system ...

  • Avaya Cajun P550R - page 17

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-7 Supervisor Commands This section describes the Smar t Module Command set, which currently consists of the set smart-module flash co mmand. set smart-module flash Command Mode Configuration Description Sets the image t ...

  • Avaya Cajun P550R - page 18

    1-8 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 A TM Uplink Commands This section describes the following commands sets: ■ A TM-Link Commands ■ Global Commands ■ Interface Commands ■ LEC Commands ■ PNNI Commands ■ Permanent V irtual Channel Commands ■ QoS Domain Commands ■ Q ...

  • Avaya Cajun P550R - page 19

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-9 A TM-Link Commands A TM-Link commands are used with RFC1 483 configurations. These commands presume that a V irtual Switch Port (VSP) has already been created. Once a VSP is created, you can use the A TM-Link commands ...

  • Avaya Cajun P550R - page 20

    1-10 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 atm-link Command Mode Configuration Description Create an atm-link. Use the no form of this command to delete an atm-link. * Note: The V irtual Switch Port (VSP) that this A TM Link will belong to must exist prior to creating the atm-link. Sy ...

  • Avaya Cajun P550R - page 21

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-11 set atm-link default-PVC Command Mode Configuration Description Sets the default virtual channel fo r an A TM Link. This command is used when the VSP is a Replicating. W ith a Replicating VSP , each A TM Link in the ...

  • Avaya Cajun P550R - page 22

    1-12 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set atm-link (enable | disable) Command Mode Configuration Description Enable or disable an A TM link. Disabling an A TM Link effectively blocks traffic to/from the rem ote destination. If you are usin g a Replicating VSP , disabling a single ...

  • Avaya Cajun P550R - page 23

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-13 set atm-link failover -link Command Mode Configuration Description Sets the atm failover -link. Th e A TM Uplink module supports a failover link. In the event one link fails, the traffic will be forwarded by the fail ...

  • Avaya Cajun P550R - page 24

    1-14 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set atm-link mapping Command Mode Configuration Description For the given A TM Link, this command maps an Ethernet priority to a PVC. * Note: All 8 Ethernet priorities should be mapped to a PVC. Any traffic forwarded at an un-mapped Ethernet ...

  • Avaya Cajun P550R - page 25

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-15 set atm-link name Command Mode Configuration Description Changes the name of an A TM Link. Syntax set atm-link <link-name> name <new -link-name> T able 1-12. Arguments , Parameters, Keywords Sample Output ...

  • Avaya Cajun P550R - page 26

    1-16 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set atm-link oam-loopback Command Mode Configuration Description Enables or disables OAM-Loopback for the A TM-Link. Enabling OAM Loopback configures the A TM-Link to send an OAM F5 packet every seconds down the default PVC. The A TM-Link wil ...

  • Avaya Cajun P550R - page 27

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-17 show atm-link Command Mode All modes Description Shows the configuration of the atm link specified by vsportId and or link-name. Syntax show atm-link <vsportId> [<link-id >] T able 1-14. Arguments , Param ...

  • Avaya Cajun P550R - page 28

    1-18 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 Outbound Priority 5 : 1-0-1 01 Outbound Priority 6 : 1-0-1 02 Outbound Priority 7 : 1-0-1 02 ...

  • Avaya Cajun P550R - page 29

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-19 Global Commands Global commands configure the A TM Uplink module’ s A TM address and Signalling type (such as PNNI or UNI). This section describes: ■ set network ■ set network multiport ■ set network pnni-lev ...

  • Avaya Cajun P550R - page 30

    1-20 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set network Command Mode Configuration Description Enable or disable an A TM network. * Note: Y ou must disable a network each time you make a change to the configuration. After you make configuration changes, you must enable the network in o ...

  • Avaya Cajun P550R - page 31

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-21 set network multiport Command Mode Configuration Description By setting Multiport to Y es, the A TM Uplink module will use PNNI signalling. PNNI provides for automatic load sharing and failover depending on configura ...

  • Avaya Cajun P550R - page 32

    1-22 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set network pnni-level Command Mode Configuration Description Set the Private Network-to-Network Interface (PNN I) level. This command is only used when Multiport is set to Y es. See the command “set network multiport” on page 21 * Note: ...

  • Avaya Cajun P550R - page 33

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-23 set network pr efix Command Mode Configuration Description Set the A TM address prefix of an A TM network. The prefix is a 13 byte (26 hex digit) number . Example Prefix: 39.01.02.03.04.05.06.07.08.0 9.10.11.12 (Note ...

  • Avaya Cajun P550R - page 34

    1-24 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show network Command Mode All Modes Description Shows A TM network configuration for the A TM Uplink module. Syntax show network Sample Output This example shows the network configuration. ATM(configure)# show network ATM Network Configuratio ...

  • Avaya Cajun P550R - page 35

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-25 Interface Commands This section describes: ■ set interface (enable | disable) ■ set interface (medium-type) ■ set interface (name) ■ show interface ...

  • Avaya Cajun P550R - page 36

    1-26 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set interface (enable | disable) Command Mode Configuration Description Enable or disable a physical interface to the A TM interface. Physical port 1 is interfaceID 1 and physical port 2 is interfaceID 2. * Note: Y ou must disable an interfac ...

  • Avaya Cajun P550R - page 37

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-27 set interface (medium-type) Command Mode Configuration Description Set the A TM interface medium type to SONET or SDH. The default value for the medium type is SONET * Note: Y ou must disable an interface each time y ...

  • Avaya Cajun P550R - page 38

    1-28 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set interface (name) Command Mode Configuration Description Name an A TM physical interface. * Note: Y ou must disable an interface each time you make a change to the configuration. After you make configuration changes, you mu st enable the i ...

  • Avaya Cajun P550R - page 39

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-29 show interface Command Mode All Modes Description Display A TM interface information. Y ou can show both interfaces or explicitly show physical port 1 or 2. Syntax show interface [<interfaceID>] T able 1-22. Pa ...

  • Avaya Cajun P550R - page 40

    1-30 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 ATM Interface 2 Configuration: ============================== Interface Name : SonetPort2 Admin Status : Enabled Oper Status : Down Medium Type : Sonet Line Type : Multi-Mode Fi ber Path Width : STS12c ...

  • Avaya Cajun P550R - page 41

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-31 LEC Commands This section describes: ■ clear lec learp ■ set lec (disable | enable) ■ set lec (join-method) ■ set lec (max-bus-cellrate-value) ■ set lec (max-bus-cellrate-value) ■ set lec (max-tim e) ■ ...

  • Avaya Cajun P550R - page 42

    1-32 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 clear lec learp Command Mode Configuration Description Use the clear LEC learp co mmand to clear the LEARP entries for a specific LEC or the entire LEARP table. This is helpful when troubleshooting A TM network prob lems, because you can forc ...

  • Avaya Cajun P550R - page 43

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-33 set lec agetime Command Mode Configuration Description This command sets the agetime for L EARP entries for the LEC. The valid range is 60 to 3600 seconds with the default value being 1200 seconds. Syntax set lec < ...

  • Avaya Cajun P550R - page 44

    1-34 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 lec Command Mode Configuration Description Create a LAN Emulation Client (LEC). Use the no form of this command to delete a LEC. Syntax lec <lecName> [<lecID>] no lec <lecID> T able 1-25. Parameters, Keywords, Arguments Samp ...

  • Avaya Cajun P550R - page 45

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-35 set lec (disable | enable) Command Mode Configuration Description Enable or disable a LEC. * Note: Y ou must disable a LEC each time you make a change to the configuration. After you make configuration changes, you m ...

  • Avaya Cajun P550R - page 46

    1-36 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set lec (join-method) Command Mode Configuration Description Set the method by which the LEC joins an ELAN. * Note: Y ou must disable a LEC each time you make a change to the configuration. After you make configuration changes, you must en ab ...

  • Avaya Cajun P550R - page 47

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-37 set lec (max-bus-cellrate-value) Command Mode Configuration Description Sets the maximum total number of cells the A TM Uplink module will send per second to the BUS. This setting prevents the A TM Uplink module from ...

  • Avaya Cajun P550R - page 48

    1-38 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set lec (max-count) Command Mode Configuration Description Set the maximum unknown f rame count per time interval f or a LEC. This parameter determine how many frames will be sent using the BUS or a lower priority VC be fore a Data Direct VC ...

  • Avaya Cajun P550R - page 49

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-39 set lec (max-time) Command Mode Configuration Description Set the unknown frame time interval for a LEC. Refer to the max- count parameter for additi onal information. * Note: Y ou must disable a LEC each time you ma ...

  • Avaya Cajun P550R - page 50

    1-40 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set lec (name) Command Mode Configuration Description Modifies a LEC name. * Note: Y ou must disable a LEC each time you make a change to the configuration. After you make configuration changes, you must en able the LEC in order for the chang ...

  • Avaya Cajun P550R - page 51

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-41 set lec (pr oxy) Command Mode Configuration Description Set the proxy mode for the LEC. The LEC can proxy for MAC addresses that are local to the A vaya switch only; or for MAC addresses learned from other LECs in ad ...

  • Avaya Cajun P550R - page 52

    1-42 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set lec (qos-domain) Command Mode Configuration Description Set the Quality of Service (QoS) Domain for the LEC. * Note: Y ou must disable a LEC each time you make a change to the configuration. After you make configuration changes, you must ...

  • Avaya Cajun P550R - page 53

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-43 set lec (selector) Command Mode Configuration Description Set the client selector for the LEC. This value will become the selector byte in the 20th position of the A TM address and will differentiate this LEC from ot ...

  • Avaya Cajun P550R - page 54

    1-44 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set lec (server -addr) Command Mode Configuration Description Set the server A TM Address used by the LEC to connect to the ELAN. * Note: Y ou must disable a LEC each time you make a change to the configuration. After you make configuration c ...

  • Avaya Cajun P550R - page 55

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-45 set lec (trigger -count) Command Mode Configuration Description Sets the maximum number of Frames per second that the A TM Uplink module will send to the BUS for forwarding rather than establish a data di re ct VCC t ...

  • Avaya Cajun P550R - page 56

    1-46 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set lec (version) Command Mode Configuration Description Set the LEC version. * Note: Y ou must disable a LEC each time you make a change to the configuration. After you make configuration changes, you must en able the LEC in order for the ch ...

  • Avaya Cajun P550R - page 57

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-47 show lec Command Mode All Modes Description Display LEC configuration. Syntax show lec [<lecID>] T able 1-38. Parameters, Keywords, Arguments Sample Output This example shows the configuration for all LECs. * N ...

  • Avaya Cajun P550R - page 58

    1-48 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 LEC AMT Address :390000... Client Selector : 0 0 Server ATM Address : C5-0079-00000000 000000000000- 00A03E000001-00 Join Method : L ECS QOS Domain : 1 Maximum Unknown Frame Count (C10) : 1 0 Maximum Unknown Frame Time (C11) : 1 LE ARP Trigge ...

  • Avaya Cajun P550R - page 59

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-49 show lec (learp) Command Mode All Modes Description Shows the A TM address to MAC address mapping for a LEC. This is helpful when trying to determine which A T M device in the A TM network is proxying for a given MAC ...

  • Avaya Cajun P550R - page 60

    1-50 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 PNNI Commands This section describes: ■ show pnni base-table ■ show pnni if-table ■ show pnni link-table ■ show pnni map-table ■ show pnni map-addr -table ■ show pnni map-node-table ■ show pnni metrics-table ■ show pnni metric ...

  • Avaya Cajun P550R - page 61

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-51 show pnni base-table Command Mode All Modes Description Show PNNI bas e table. Syntax show pnni base-table Sample Output This example shows PNNI base table information. ATM(configure)# show pnni base-tab le PNNI Base ...

  • Avaya Cajun P550R - page 62

    1-52 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni if-table Command Mode All Modes Description Show PNNI In terface (IF) ta ble. Syntax show pnni if-table Sample Output This example show PNNI IF table information. ATM(configure)# show pnni if-table PNNI Interface Table ============= ...

  • Avaya Cajun P550R - page 63

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-53 show pnni link-table Command Mode All Modes Description Show PNNI lin k table Syntax show pnni link-table Sample Output This example shows PNNI link table information. ATM-7(configure)# show pnni link-t able PNNI Lin ...

  • Avaya Cajun P550R - page 64

    1-54 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni map-table Command Mode All Modes Description Show PNNI ma p table. Syntax show pnni map-table Sample Output This example shows PNNI map table information. ATM(configure)# show pnni map-tabl e PNNI Map Table ========================= ...

  • Avaya Cajun P550R - page 65

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-55 show pnni map-addr -table Command Mode All Modes Description Show PNNI map address table. Syntax show pnni map-addr-table Sample Output This example shows PNNI map address table information. ATM # show pnni map-addr- ...

  • Avaya Cajun P550R - page 66

    1-56 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni map-node-table Command Mode All Modes Description Show PNNI map node table. Syntax show pnni map-node-table Sample Output This example shows PNNI map node table information. ATM# show pnni map-node-table pnniNodeIndex 1 pnniMapNodeI ...

  • Avaya Cajun P550R - page 67

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-57 show pnni metrics-table Command Mode All Modes Description Show PNNI met rics table. Syntax show pnni metrics-table Sample Output This example shows PNNI metrics table information. ATM(configure)# show pnni metrics- ...

  • Avaya Cajun P550R - page 68

    1-58 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni nbr -peer -table Command Mode All Modes Description Show PNNI Neighbor (NBR) peer table Syntax show pnni nbr-peer-table Sample Output This example shows PNNI nbr peer table information. ATM(configure)# show pnni nbr-peer -table PNNI ...

  • Avaya Cajun P550R - page 69

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-59 show pnni nbr -peer -port-table Command Mode All Modes Description Show PNNI NBR peer port table. Syntax show pnni peer-port-table Sample Output This example shows PNNI peer po rt table information. ATM (configure)# ...

  • Avaya Cajun P550R - page 70

    1-60 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni node-table Command Mode All Modes Description Show PNNI node table. Syntax show pnni node-table Sample Output This example shows PNNI node ta ble information. ATM# show pnni node-table pnniNodeIndex 1 pnniNodeLevel 96 pnniNodeId 60a ...

  • Avaya Cajun P550R - page 71

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-61 show pnni node-pgl-table Command Mode All Modes Description Show PNNI node Peer Group Lead (PGL) table. Syntax show pnni node-pgl-table Sample Output This example shows PNNI node PGL table i nformation. ATM(configure ...

  • Avaya Cajun P550R - page 72

    1-62 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni node-svcc-table Command Mode All Modes Description Show PNNI node Switch V irtual Channel Connection (SVCC) table. Syntax show pnni node-svcc-table Sample Output This example shows PNNI node SVCC table information. ATM(configure)# s ...

  • Avaya Cajun P550R - page 73

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-63 show pnni node-timer -table Command Mode All Modes Description Show PNNI node timer table. Syntax show pnni node-timer-table Sample Output This example shows PNNI no de timer table information. ATM# show pnni node-ti ...

  • Avaya Cajun P550R - page 74

    1-64 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni ptse-table Command Mode All Modes Description Show PNNI State T o pology State Element (PTSE) table. Syntax show pnni ptse-table Sample Output This example shows PNNI P TSE table information. ATM(configure)# show pnni ptse-tab le PN ...

  • Avaya Cajun P550R - page 75

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-65 show pnni r oute-addr -table Command Mode All Modes Description Show PNNI route address table. Syntax show pnni route-addr-table Sample Output This example shows PNNI route ad dress table information. ATM(configure)# ...

  • Avaya Cajun P550R - page 76

    1-66 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni scope-table Command Mode All Modes Description Show PNNI scope table. show pnni scope-table Sample Output This example shows PNNI scope table information. ATM(configure)# show pnni scope-ta ble PNNI Scope Mapping Table ============= ...

  • Avaya Cajun P550R - page 77

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-67 show pnni summary-addr ess-table Command Mode All Modes Description Show PNNI summary address table. Syntax show pnni summary-address-table Sample Output This example shows PNNI summary address table i nformation. AT ...

  • Avaya Cajun P550R - page 78

    1-68 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni svccr cc-table Command Mode All Modes Description Show PNNI SVC CRC table. Syntax show pnni summary-address-table Sample Output This example shows PNNI summary SVC CRC table information. ATM(configure)# show pnni summary- address- t ...

  • Avaya Cajun P550R - page 79

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-69 Permanent Virtual Channel Commands ■ pvc ■ no pvc ■ set pvc cdvt ■ set pvc mbs ■ set pvc pcr ■ set pvc port ■ set pvc priority ■ set pvc red-pack ■ set pvc scr ■ set pvc traffic-class ■ set pvc ...

  • Avaya Cajun P550R - page 80

    1-70 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 pvc Command Mode Configure Description Creates a Permanent V irtual Channel (PVC). Use the no form of this command to delete a virtual cha nnel. * Note: UBR PVC is created by default. Use the set pvc traffic- class command to change the traff ...

  • Avaya Cajun P550R - page 81

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-71 set pvc cdvt Command Mode Configure Description Sets the Cell Delay V ariation T olerance for the specified pvc. Syntax set pvc <pvcID> cdvt <cdvt-value> T able 1-41. Arguments , Parameters, Keywords Samp ...

  • Avaya Cajun P550R - page 82

    1-72 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set pvc mbs Command Mode Configure Description Sets the Maximum Burst Size (MBS) for the specified p vc. This can only be set for pvcs with a traffic-class of type “VBR”. Syntax set pvc <pvcID> mbs <mbs-value> T able 1-42. Arg ...

  • Avaya Cajun P550R - page 83

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-73 set pvc pcr Command Mode Configure Description Sets the Peak Cell Rate (P CR) for the specified pvc. Syntax set pvc <pvcID> pcr <pcr-value> T able 1-43. Arguments , Parameters, Keywords Sample Output The ...

  • Avaya Cajun P550R - page 84

    1-74 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set pvc port Command Mode Configure Description Sets the physical port for the specified pvc. Syntax set pvc <pvcID> port <physPortId> T able 1-44. Arguments , Parameters, Keywords Sample Output The following example attache s the ...

  • Avaya Cajun P550R - page 85

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-75 set pvc priority Command Mode Configure Description Sets the inbound priority for the sp ecified pvc. T raffic received on this PVC will be forwarded through the A v aya switch at this priority level. Syntax set pvc ...

  • Avaya Cajun P550R - page 86

    1-76 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set pvc r ed-pack Command Mode Configure Description Sets the Red-Pack (random early de tection) ID for the specified pvc. * Note: RED is always disabled and cannot be set for UBR traffic class PVCs. Syntax set pvc <pvcID> red-pack < ...

  • Avaya Cajun P550R - page 87

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-77 set pvc scr Command Mode Configure Description Sets the Sustained Cell Rate (SCR) for the specified pvc. * Note: The Sustained Cell Rate must be at least one unit less than the Peak Cell Rate setting. Syntax set pvc ...

  • Avaya Cajun P550R - page 88

    1-78 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set pvc traf fic-class Command Mode Configure Description Sets the traffic class for the specified pvc. Syntax set pvc <pvcID> traffic-class {cbr | ubr | vbr-nrt | vbr-rt} T able 1-48. Arguments , Parameters, Keywords Sample Output The ...

  • Avaya Cajun P550R - page 89

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-79 set pvc vci Command Mode Configure Description Changes the vci for the sp ecified pvc. Syntax set pvc <pvcID> vci <vci> T able 1-49. Arguments , Parameters, Keywords Sample Output The following example ch ...

  • Avaya Cajun P550R - page 90

    1-80 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set pvc vpi Command Mode Configure Description Changes the vpi for the specif ied pvc. Syntax set pvc <pvcID> vpi <vpi> T able 1-50. Arguments , Parameters, Keywords Sample Output The following example se ts the vpi for the pvc fr ...

  • Avaya Cajun P550R - page 91

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-81 show pvc Command Mode Configure Description Shows detailed information for the pvc specified in pvcID . Syntax show pvc <link-name> [<pvcID>] T able 1-51. Arguments , Parameters, Keywords Sample Output Th ...

  • Avaya Cajun P550R - page 92

    1-82 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 QoS Domain Commands This section describes: ■ qos-domain ■ no qos-dom ain ■ set qos-domain (mapping) ■ set qos-domain (name) ■ set qos-domain (name) ■ show qos-domain ...

  • Avaya Cajun P550R - page 93

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-83 qos-domain Command Mode Configuration Description Create a Quality of Service (QoS) domain. Use the no form of the command to delete a QoS domain. Syntax qos-domain <qosDomainID> no qos-domain <qosDomainID&g ...

  • Avaya Cajun P550R - page 94

    1-84 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set qos-domain (mapping) Command Mode Configuration Description Map Ethernet Frames with a particular priority to a QoS Set. Syntax set qos-domain <qosDomainID> mappi ng <qosHandle> <priority> T able 1-53. Parameters, Keywor ...

  • Avaya Cajun P550R - page 95

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-85 set qos-domain (name) Command Mode Configuration Description Name a QoS domain. Syntax set qos-domain <qosDomainID> name <qos-domain-name> T able 1-54. Parameters, Keywords, Arguments Sample Output This e ...

  • Avaya Cajun P550R - page 96

    1-86 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show qos-domain Command Mode All Modes Description Show QoS Domain configuration information. Syntax show qos-domain [<qosDomainID>] T able 1-55. Parameters, Keywords, Arguments Sample Output This example shows QoS domain configuration ...

  • Avaya Cajun P550R - page 97

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-87 This example shows qos-domai n co nfiguration information for all existing qos-domai ns. ATM(configure)# show qos-domain ID Name -- ---- 1 thoreau 3 QosDomain3 12 QosDomain12 ...

  • Avaya Cajun P550R - page 98

    1-88 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 QoS Set Commands This section describes: ■ qos-set ■ no qos-set ■ set qos-set (mbs) ■ set qos-set (mbs) ■ set qos-set (mbs) ■ set qos-set (mbs) ■ set qos-set (pcr) ■ set qos-set (priority) ■ set qos-set (priority) ■ set qo ...

  • Avaya Cajun P550R - page 99

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-89 qos-set Command Mode Configuration Description Create a Quality of Service (QoS) set. Use the no form of this command to delete a QoS set. Syntax qos-set <qosDomainID> <qosHandle> no qos-set <qosDomain ...

  • Avaya Cajun P550R - page 100

    1-90 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set qos-set (mbs) Command Mode Configuration Description Set the maximum burst size for a QoS set. Syntax set qos-set <qosDomainID> <qosHandle> mbs <mbs-value> T able 1-57. Parameters, Keywords, Arguments Sample Output This ...

  • Avaya Cajun P550R - page 101

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-91 set qos-set (name) Command Mode Configuration Description Set the name for a QoS Set. Syntax set qos-set <qosDomainID> <qosHand le> name <name> T able 1-58. Parameters, Keywords, Arguments Sample Ou ...

  • Avaya Cajun P550R - page 102

    1-92 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set qos-set (pcr) Command Mode Configuration Description Set the Peak Cell Rate (PCR) for a QoS set. Syntax set qos-set <qosDomainID> <qosHandle> pcr <pcr-value> T able 1-59. Parameters, Keywords, Arguments Sample Output Thi ...

  • Avaya Cajun P550R - page 103

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-93 set qos-set (priority) Command Mode Configuration Description Set the inbound priority for a Q oS set. Frames received on a VC created with this QoS Sets tra ffic parameters will be forwarded through the network at t ...

  • Avaya Cajun P550R - page 104

    1-94 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set qos-set (r ed-pack) Command Mode Configuration Description Sets the Random Early Detection (RED) pack associated with the QoS Set. * Note: RED cannot be set for UBR traffic class V irtual Circuits Syntax set qos-set <qosDomainID> &l ...

  • Avaya Cajun P550R - page 105

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-95 set qos-set (scr) Command Mode Configuration Description Set the Sustained Cell Rate (SCR) for a QoS set. Syntax set qos-set <qosDomainID> <qosHandle> scr <scr-value> T able 1-62. Parameters, Keywor ...

  • Avaya Cajun P550R - page 106

    1-96 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set qos-set (traf fic-class) Command Mode Configuration Description Select a traffic class for a QoS s et. Syntax set qos-set <qosDomainID> <qosHandle> traffic-class {ubr | vbr-nrt | vbr -rt | cbr} T able 1-63. Parameters, Keyword ...

  • Avaya Cajun P550R - page 107

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-97 show qos-set Command Mode All Modes Description Show QoS set configuration. Syntax set qos-set <qosDomainID> [<qosHa ndle>] T able 1-64. Parameters, Keywords, Arguments Sample Output This example shows th ...

  • Avaya Cajun P550R - page 108

    1-98 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 RED Pack Commands This section describes: ■ set random-detect (max-threshold) ■ set random-detect (min-threshold) ■ set random-detect (probability) ■ set random-detect (thmin-thmax-prob-wq) ■ set random-detect wq ■ show random-det ...

  • Avaya Cajun P550R - page 109

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-99 set random-detect (max-thr eshold) Command Mode Configuration Description Set the maximum threshold val ue for a particular RED Pack. * Note: For information on paramete r values for all RED Pack commands, see C onfi ...

  • Avaya Cajun P550R - page 110

    1-100 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set random-detect (min-thr eshold) Command Mode Configuration Description Set the minimum threshold valu e for a particular RED Pack. Syntax set random-detect <redID> min-thre shold <minTH-value> T able 1-66. Parameters, Keywords ...

  • Avaya Cajun P550R - page 111

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-101 set random-detect (pr obability) Command Mode Configuration Description Set the probability factor valu e for a particular RED Pack. Syntax set random-detect <redID> probabil ity <prob-value> T able 1-67 ...

  • Avaya Cajun P550R - page 112

    1-102 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set random-detect (thmin-thmax-pr ob-wq) Command Mode Configuration Description Sets all the parameters fo r a particular RED Pack. Syntax set random-detect <redID> <minTH-v alue> <maxTH- value> <prob-value> <wq-va ...

  • Avaya Cajun P550R - page 113

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-103 set random-detect wq Configuration Description Sets the weight value fo r the queue. Syntax set random-detect <redID> wq <wq-v alue> T able 1-69. Parameters, Keywords, Arguments Sample Output This exampl ...

  • Avaya Cajun P550R - page 114

    1-104 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show random-detect Command Mode Configuration Description Shows all configured RED Packs. Syntax show random-detect [<redID>] T able 1-70. Parameters, Keywords, Arguments Sample Output This example displays all the pa rameters for all ...

  • Avaya Cajun P550R - page 115

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-105 System Commands This section describes: ■ copy (filename) ■ copy (startup-config) ■ copy running-config startup-config ■ dir ■ end ■ erase ■ erase startup-config ■ exit ■ help ■ nvram initialize ...

  • Avaya Cajun P550R - page 116

    1-106 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 copy (filename) Command Mode Configuration or en able (Privileged Mode) Description Copy one file to another file with in NVRAM. This can be useful for storing a copy of a working configuratio n before making changes. In the event a new conf ...

  • Avaya Cajun P550R - page 117

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-107 copy (startup-config) Command Mode Configuration or Enable Description Copy a specified file to the startup co nfiguration. This is useful if you have multiple files in NVRAM and wish to run the switch with a partic ...

  • Avaya Cajun P550R - page 118

    1-108 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 copy running-config startup-config Command Mode Configuration or Enable Description Copy the running configuration to the startup configuration. This effectively records all of the configuration changes you have ma de to the switch so the ne ...

  • Avaya Cajun P550R - page 119

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-109 dir Command Mode Configuration or Enable Description Display a specific filename or the list of files in NVRAM. Syntax dir [<filename>] T able 1-73. Parameters, Keywords, Arguments Sample Output This example s ...

  • Avaya Cajun P550R - page 120

    1-110 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 end Command Mode Configuration or Enable Description Exit the configuration mode and re -enter the privileged mode. This is the same as the Exit command. Syntax end Sample Output This example illustrates how to ex it the configurat ion mode ...

  • Avaya Cajun P550R - page 121

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-111 erase Command Mode Configuration or Enable Description Erase a specified file from NVRAM. Syntax erase <filename> T able 1-74. Parameters, Keywords, Arguments Sample Output This example erases the fil e named ...

  • Avaya Cajun P550R - page 122

    1-112 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 erase startup-config Command Mode Configuration or Enable Description Erase the startup (bootup) co nfiguration file from NVRAM. * Note: Y ou should copy the startup-config to TF TP first, or copy the running-config to startup- config afterw ...

  • Avaya Cajun P550R - page 123

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-113 exit Command Mode Configuration or Enable Description Exit the current mode and re -enter the previous mode. Syntax exit Sample Output This example illustrates exiting the current mode and re-entering the previous m ...

  • Avaya Cajun P550R - page 124

    1-114 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 help Command Mode All Modes Description Display a full help list of all commands available in the current mode. Syntax help Sample Output This example displays the help lis t of commands available in the User mode. ATM> help dir [<file ...

  • Avaya Cajun P550R - page 125

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-115 nvram init ialize Command Mode Configuration Description Initialize NVRAM (Non-V olatile RAM). This erases the contents of NVRAM. CAUTION This command erases all configur ations and sets the switch back to factory d ...

  • Avaya Cajun P550R - page 126

    1-116 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 re l o ad Command Mode Configuration or Enable Description Reload the application so ftware and reset the system. When sessioned to the A TM Uplink module , this command resets just the A TM Uplink module. Same as the reset command. Syntax r ...

  • Avaya Cajun P550R - page 127

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-117 re s e t Command Mode Configuration Description Reload the software and reset the system. When sessioned to the A TM Uplink module, this command resets just the A TM Uplink module. Same as the reload command. Syntax ...

  • Avaya Cajun P550R - page 128

    1-118 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show boot Command Mode All Modes Description Display information about FEPROM. Syntax show boot Sample Output This example displays FEPROM information. ATM (configure)# show boot Checking for valid image in BOOT. File Information: File Forma ...

  • Avaya Cajun P550R - page 129

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-119 show file_name Command Mode Privileged and Configuration Description List the contents of a specified file. Syntax show file_name <filename> T able 1-75. Parameters, Keywords, Arguments Sample Output This exam ...

  • Avaya Cajun P550R - page 130

    1-120 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show flash Command Mode All Modes Description Display the information about FEPROM. FEPROM holds the application code and boot code that runs t he A TM Uplink module. Syntax show flash Sample Output This example shows FEPROM information. ATM ...

  • Avaya Cajun P550R - page 131

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-121 show history Command Mode All Modes Description List the commands that have been entered during the current session. Syntax show history Sample Output This example shows the last seve ral command s entered during a ...

  • Avaya Cajun P550R - page 132

    1-122 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show running-config Command Mode Privileged and Configuration Description List the commands that represent the running configuration. Syntax show running-config Sample Output This example shows the running configuration. ATM> show running ...

  • Avaya Cajun P550R - page 133

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-123 show startup-config Command Mode Privileged and Configuration Description List the commands that represent the startup configuration. Syntax show startup-config Sample Output This example shows the startup configura ...

  • Avaya Cajun P550R - page 134

    1-124 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show version Command Mode All Modes Description Display the software version currently running on the system. Syntax show version Sample Output This example shows the version of software that is currently running. ATM(configure)# show versio ...

  • Avaya Cajun P550R - page 135

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-125 VPOR T Commands This section describes: ■ vport ■ no vport ■ set vport (enable | disable) ■ set vport (ilmi) ■ set vport (max-vci) ■ set vport (name) ■ set vport (path-cost) ■ set vport (sig-type) ? ...

  • Avaya Cajun P550R - page 136

    1-126 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 vport Command Mode Configuration Description Create or delete an A TM Port (VPORT). Use the no form of this command to delete a VPOR T . V irtual Ports are used to specify V irtual Path numbers. By Default, a single VPORT is created for V ir ...

  • Avaya Cajun P550R - page 137

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-127 set vport (enable | disable) Command Mode Configuration Description Enable or disable a VPORT . Syntax set vport <interfaceID> <vpiNumber > {enable | disable} T able 1-77. Parameters, Keywords, Arguments ...

  • Avaya Cajun P550R - page 138

    1-128 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set vport (ilmi) Command Mode Configuration Description Configures Interim Local Manage ment Interface (ILMI) address registration on the VPORT . If add_reg is specified, the VPORT will register the A TM address of the A TM Uplink module wit ...

  • Avaya Cajun P550R - page 139

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-129 set vport (max-vci) Command Mode Configuration Description Set the maximum V irtual Circuit Id entifier (VCI) tag value for a path. * Note: Y ou must disable a VP ORT each time you make a change to the configuration ...

  • Avaya Cajun P550R - page 140

    1-130 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set vport (name) Command Mode Configuration Description Sets the virtual port’ s name. * Note: Y ou must disable a VP ORT each time you make a change to the configuration. After you make configurati on changes, you must en able the VPORT i ...

  • Avaya Cajun P550R - page 141

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-131 set vport (path-cost) Command Mode Configuration Description Set the path cost for routing over an A TM interface for the virtual port. * Note: Y ou must disable a VP ORT each time you make a change to the configura ...

  • Avaya Cajun P550R - page 142

    1-132 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set vport (sig-type) Command Mode Configuration Description Select the version of the User -to-Ne twork Interface (UNI) that is to be used on a virtual port. If Auto signalling type is selected, the A TM uplink module will automatically try ...

  • Avaya Cajun P550R - page 143

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-133 set vport (traf fic-shape-rate) Command Mode Configuration Description Configure output maximum number of cells transmitted (or throttling) on this VPORT . * Note: Y ou must disable a VP ORT each time you make a cha ...

  • Avaya Cajun P550R - page 144

    1-134 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show vport Command Mode All Modes Description Show V irtual Port configuration information. Syntax show vport [<interfaceID> <vpiNumb er>] * Note: interfaceID and vpiNumber must either be omitted or include. Y ou cannot enter o n ...

  • Avaya Cajun P550R - page 145

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-135 This example shows configurati o n information for all existing VPORT s . ATM(configure)# show vport Phys VPI VPort A dmin Ope r ILMI Max Signalin g Port Name Status Status En able VCI Type ---- --- ------- ------ - ...

  • Avaya Cajun P550R - page 146

    1-136 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 VSPOR T Commands This section describes the following commands: ■ vsport ■ no vsport ■ set vsport default-link ■ set vsport default-port ■ set vsport (enable | disable) ■ set vsport load-share ■ set vsport name ■ set vsport s ...

  • Avaya Cajun P550R - page 147

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-137 vsport Command Mode Configuration Description Create a V irtual Switched Port. Use the no fo rm o f t h is c om m an d to delete a V irtual Switched Port. Syntax vsport <vsp ortName> [pac ket- rep {yes | no}] ...

  • Avaya Cajun P550R - page 148

    1-138 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set vsport default-link Command Mode Configuration Description Sets the default A TM Link for the V irtual Switched Port identified by vsportId. If you add a static AF T entry on the supervisor , a static LAF T is automatically created bound ...

  • Avaya Cajun P550R - page 149

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-139 set vsport default-port Command Mode Configuration Description Sets the default A TM Link for the V irtual Switched Port identified by vsportId. set vsport <vsportId> default-link <link-name> T able 1-87 ...

  • Avaya Cajun P550R - page 150

    1-140 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set vsport default-PVC Command Mode Configuration Description Sets the default Permanent V irtua l Circuit (PVC) for the V irtual Switched Port identified by vsportId. This command is only used for Non-Replicating VSPs. If the VSP is replica ...

  • Avaya Cajun P550R - page 151

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-141 set vsport (enable | disable) Command Mode Configuration Description Enables or disables the V i rtual Switched Port identified by vsportId . Syntax set vsport <vsportId> {enable | di sable} T able 1-89. Argum ...

  • Avaya Cajun P550R - page 152

    1-142 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set vsport load-shar e Command Mode Configuration Description Sets the V irtual Switch Port identified by vsportId to be a load- sharing port. This presumes that the VSP Simple-Bridge or LLC Mux Bridge. Further , for load share to work, you ...

  • Avaya Cajun P550R - page 153

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-143 set vsport name Command Mode Configuration Description Changes the name of the V irtual Switched Port identified by vsportId . Syntax set vsport <vsportId> name <vsport -name> T able 1-91. Arguments , Pa ...

  • Avaya Cajun P550R - page 154

    1-144 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set vsport static-laft Command Mode Configuration Description Configure a static LANE Address Forwarding T able (LAF T) entry . The A TM Uplink module manages RFC1483 VSPs as if they were LANE Clients. A static LAF T entry allows you to manu ...

  • Avaya Cajun P550R - page 155

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-145 set vsport type Command Mode Configuration Description Sets the type of the vsport. This determines the encapsulation format for Ethernet Frames carried across the A TM network. Simple-Bridged is used when each VC c ...

  • Avaya Cajun P550R - page 156

    1-146 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show static-laft Command Mode All Modes Description Shows the static LAF T entries for a given VSP . Syntax show static-laft <vsportId> T able 1-94. Arguments , Parameters, Keywords Sample Output The following exampled shows the static ...

  • Avaya Cajun P550R - page 157

    Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-147 show vsport Command Mode All Modes Description Shows the configuration for all V irtual Switched Ports configured on the device or for the V irtual Switched Port identified by vsportId . Syntax show vsport [<vspo ...

  • Avaya Cajun P550R - page 158

    1-148 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 ...

  • Avaya Cajun P550R - page 159

    1 Avaya P550R/P580/P880/P882 Multiservi ce Switch ATM Uplink CLI Reference Guide, Version 2.0 Index A accessing CLI 1-5 command modes 1-4 accessing command modes 1-1 A TM Forum W eb site 1-ix Av a y a product information 1-ix W eb address 1-ix B basic functions help 1-4 buffering command s set buffering fabric-port (hipri-service- ratio) 1-25 C CLI ...

  • Avaya Cajun P550R - page 160

    2 Avaya P550R/P580/P880/P8 82 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0 show network 1-23 , 1-24 show pnni base-table 1-51 show pnni if-table 1-52 show pnni link-table 1-53 show pnni map-addr -table 1-55 show pnni map-node-table 1-56 show pnni map-table 1-54 show pnni metrics-table 1-57 show pnni nbr -peer -port-table 1-58 , 1 ...

  • Avaya Cajun P550R - page 161

    3 Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0 show pnni link-table 1-53 show pnni map-addr -table 1-55 show pnni map-node-table 1-56 , 1-58 show pnni map-table 1-54 show pnni metrics-table 1-57 show pnni nbr -peer-port--table 1-59 show pnni nbr -peer -port-table 1-58 show pnni node-pgl-table 1-60 , 1-6 ...

  • Avaya Cajun P550R - page 162

    4 Avaya P550R/P580/P880/P8 82 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0 show pnni map-addr -table command 1-55 show pnni map-node-table command 1-56 show pnni map-table command 1-54 show pnni metrics-table command 1-57 show pnni nbr -peer -port-table command 1- 58 , 1-59 show pnni nbr -peer -table command 1-58 show pnni node-p ...

Fabbricante Avaya Categoria Switch

I documenti che otteniamo dal fabbricante del dispositivoAvaya Cajun P550R possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Avaya
- manuali per l’uso Cajun P550R
- schede prodotto Avaya
- opuscoli
- o etichette energetiche Avaya Cajun P550R
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Avaya Cajun P550R.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Avaya Cajun P550R, manuali di manutenzione, brevi manuali o manuali utente Avaya Cajun P550R. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Avaya Cajun P550R.

Manuali per l’uso simili

Manuale completo del dispositivo Avaya Cajun P550R, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Avaya Cajun P550R dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Avaya Cajun P550R.

Il manuale per l’uso completo Avaya, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Avaya Cajun P550R - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Avaya Cajun P550R, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Avaya Cajun P550R che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Avaya Cajun P550R - che ci dovrebbe aiutare nei primi passi durante l'uso Avaya Cajun P550R
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Avaya Cajun P550R
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Avaya Cajun P550R in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Avaya Cajun P550R?

Utilizza il modulo sottostante

Se non hai risolto il problema con Avaya Cajun P550R con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Avaya Cajun P550R è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)