-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 1
Detailed USER M A NU A L FOR: EBX smartModule800/900 MSEBX800/900 Nordstrasse 11/F CH - 4542 Luterbach Tel.: ++41 (0)32 681 58 00 Fax: ++41 (0)32 681 58 01 Email: support@digitallogic.com Homepage: http://www.digitallogic.com ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 2
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 2 For internal use o nly: File: MSEBX800 -900_Detailed_V1.0.doc Path: R:HANDBUCHMS EBXMSEBX 800MSEBX800-900 _Detailed_V1.0.doc COPYRIGHT 2008 BY D IGITAL -LOGIC A G This publication is protected by copyright and all rights are reserve d . N o part of this d ocument m ay be repr ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 3
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 3 Table of Content s 1. P REFACE ............ ......................................... ......................................... ......................................... .............. 5 1.1. Trademarks ................................. ......................................... ................. ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 4
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 4 7.2. The 3pin Jumpers ....................... ......................................... ......................................... ................ 50 7.3. Jumpers on t he MSEBX800 ............................... ......................................... ................................. 51 8. I ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 5
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 5 1. P REF A CE The inf o rmation c ontained in this m anual has bee n c a refull y check ed and is believed to be accurate; it is subject to change without notice. Product advances mean that som e specifications m ay ha v e changed . DIGITAL-LOGIC AG assu mes no responsibility for any inaccuracie ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 6
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 6 1.5. Recycling Informati on All com ponen ts within this product fulfill the requirem ents of the RoHS (Restricti on of Hazard ous Substance s Directive). The pro du ct is s ol dered wi th a lea d free pro cess. 1.6. Technical Support 1. Contact your local DIG ITAL-LOGIC Technical Support, i n y ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 7
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 7 1.8. Explanation of Sy mbols CE Conformity This symbol indicates that the product described in this manual is in complian ce with all applied CE standards . Caution, Electr ic Shock! This symbol and title warn of hazards due to electrical shocks (> 60V) when touching products or parts of them ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 8
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 8 1.9. Applicable Docume nts and Standards The following publications are used in co njunction with this m anual. W hen an y of the ref erenced specifications are s uperseded b y an a pp roved revisi o n, t hat r evision s hall appl y . A l l doc uments m ay be obtained from their respective organ ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 9
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 9 Sm art Batte ry Dat a Specification Revision 1.1, December 11, 1998. www.sbs- forum.org System Management Bus (SM B us) Spec i ficat i on Vers ion 2.0, August 3, 200 0 Copyright © 1994, 1 99 5, 1998, 2000 Duracell, Inc., En ergi z er Power System s, Inc., Fujitsu, Lt d., I ntel Corporat ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 10
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 10 RoHS is often refer red to as the "lead-free" directi v e but it r estricts the use of the following substances: Lead Mercur y Cadm ium Chrom iu m V I PBB and PB DE The maximum allowable concentration of any of the above mentioned substances is 0.1% (except for Cad ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 11
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 11 1.12. Swiss Qualit y 100% Mad e in Switzerland DIGIT AL-LOGIC is a member of "Swiss-Labe l " T hi s product was not manuf a ctured b y em ployees earning piecework w ages T hi s product w as manuf actured in humane work conditions All employees who worked on this p ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 12
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 12 2. O VERVIEW 2.1. Standard Features The MICRO S PACE EBX is a m ini aturized modular device inc orporating t he major elements of a PC/A T compatible com puter. It includes standard PC/AT co mpatibl e elem ents, such as: Powerful GEODE LX 8 00/9 0 0 with 500/ 6 00MH z DDRAM 128-1024M By ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 13
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 13 2.4. Block Diagrams 2.4.1. MSEBX800 ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 14
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 14 2.4.2. SM800 ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 15
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 15 2.5. MSEBX800/900 Specifications CPU Specification CPU SM800 AMD GEODE LX800 /900 located in the sm a rtModule800/ 9 00 CPU Core Suppl y 1.25V very low po wered 1 st Level Cache 32k data and 32k code 2 nd Level Cache 128kByte Performance SM800PCX SM900PCX P2 Equivalent Perf ormance: 500MH z 600 ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 16
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 16 External Interface s Specification Video Interfaces CRT1, DVO USB V1.1/2.0 4 Ports LPT IEEE1293 Printer COM1 RS232 COM2 RS232 COM3 - COM4 - Keyboard PS/2 Mouse PS/2 Floppy 26pin FCC Interf ace for TEAC Mini-Flopp y Parallel-Hard disk 2.5” 2 x 44pin RM2.0m m ATAIDE-cab l e Parallel-Hard disk 3 ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 17
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 17 Operating Tem per ature Specification: MIL-810-501 MIL-810-502 Extended tem perature range: SM800PCX (500 M Hz) -40° C to +70° C Security e1 Not planned UL Not planned ETS 301 Not p l anned CE/SEV Yes Safety AR385-16 If all signals are e xternall y filtered and assembled into an enclosed meta ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 18
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 18 2.6. Examples of Or d ering Codes The MSEBX800 s y stem i s com b ined from : Baseboard MSEBX8 00 smartModule 800/9 00-xxx (must be ordered sep arately) Memor y : SOD I MM2 00 -DDR A M (must b e o rder e d separately) Article Part No. Desc ription MSEBX800 811060 EBX board without S M800/ 900-x ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 19
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 19 2.7. Dimensions & Dia g rams MSEBX800 ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 20
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 20 ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 21
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 21 ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 22
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 22 2.8. Incompatibilitie s to a Stan dard PC/AT None. 2.9. MSEBX800/900 Related A pplica tion Notes # Description 80 High fr eq uenc y Radiation (t o m eet E N55022) Application Notes are availble at http://www.di gi tallog ic.com support, or on a ny Application CD from DIGITAL-LOGIC. 2.10 ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 23
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 23 2.11. Thermoscan Product Part Number Ser ia l Numb er Version MSEBX800 811202 45320210010 0.2 SM800PCX 805164 45316410032 2.1 SODIMM DDR 1GB 870672 - - Software W in dows XP SP2 running d esk top Top view, passive cooled: t [min] f CPU [MHz] I [A] P [W] 60 500 0.5 9.5 2.12. RTC Batter y Lifetim ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 24
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 24 3. P REP A R A T ION 3.1. Important Infor m ation Warning, ESD Sens itive Device! Place the em bedded computer bo a rd on an isolated , ESD-protected s u rfac e. Also ensure that all equipment, tools an d people are fully protect ed agains t ESD. Attention! The smart Mo dule must be firmly atta ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 25
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 25 3.2. Mounting the s m artModule Line up the holes in t he smartModule o n the MSEBX board (top side). Then on the re v erse s ide, attach the smartModule usi ng 4 Phil l ips head scr ews (circled in red, within the r ed fram e m arking the approxim ate location of the smartModule). The screws a ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 26
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 26 3.3. RAM Assembl y /Disasse mbly To install or change the RAM, follow these steps : 1. Unmount the smartModule b y removing the 4 screws m ar ked i n red (see the photo f ro m the previous page). 2. To change the R A M: a. Using your thum bnails, gently push the clips h olding th e RAM module i ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 27
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 27 e. Slowly push the R AM down until the clips "click " into pl a ce (Photo 3). Photo 3 3. To install a RAM: a. Carefully place the side of the RAM with the connec tors into the slot. There is onl y one correc t way to place the R AM in the slot due to a not ch bet w een the connectors ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 28
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 28 3.4. Power & Reset Buttons Power Button : Push the Po wer Button for 2 seconds to star t up the s ystem. Reset Button: Should th e system hang, press the Reset Butto n. ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 29
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 29 4. B US S IGNALS 4.1. PC104 Bus Note... The ISA-Bus m ay have so me minor incompatibilities, see Chapter 6. AEN, output Address Enable: used to d egate the m icroprocessor and ot her devices f ro m the I/O c h annel to allow DMA transfers to t ake plac e. low = CPU Cycle, high = DMA Cycle BALE, ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 30
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 30 /Master, input This s ig nal is us e d w ith a D RQ line to gain control of the sy stem . A p rocess o r or DM A contro ller on the I/O channel m ay issue a D RQ to a DMA channel in ca scade mode and receive a /DA CK. /MEM CS 16, input MEMCS16 Chip Select: s ignals the s y stem board if the pr ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 31
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 31 /SMEMW , input/output These signals instruct the m emory de vi ces to store the data present on t h e data bus for the f i rst MByte. /SMEMW i s active in al l mem o ry read cycles. /SMEMW may be driven by any m icroprocessor or DMA co ntroller in the system. W hen a microprocess or on the I/O ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 32
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 32 5. D ET A ILED S YS TEM D ESCRIPTION 5.1. Boot Time System Boot T imes Definitions/Boot- Medium Quick Boot* Normal Boot MSEBX800-500MH z with RTC-Backup Batter y Memor y 256 MB shar e d 8M B for Video time [s] From Flopp y d isk Boot from Setup-D isk1 MS-DOS v6.22 to "Start i ng MS-DO S &q ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 33
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 33 5.2. Interfaces 5.2.1. PS/2 Key board (AT Compatible) an d PS/2 Mouse X31 Keyboard Pin Signal Pin Signal 1 KB_Dat a 2 - 3 GND 5 +5Volt / 100m A 6 KB_Clk 8 - X32 Mouse Pin Signal Pin Signal 1 MB_Data 2 - 3 GND 5 +5Volt / 100m A 6 MB_Clk 8 - 5.2.2. Line Printer Po rt LPT1 A standard bi-direc ti o ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 34
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 34 5.2.4. Floppy Disk Interface Supported Flopp y Format s Capacity Drive size Tracks Data r a te DOS version 1.2 MB 5-1/4" 80 500 KHz 3.0 - 6.22 720 K 3-1/2" 80 250 KHz 3.2 - 6.22 1.44 M 3-1/2" 80 500 KH z 3.3 - 6.22 Floppy Interface Con figuration The desired configuration of f l ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 35
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 35 5.3. Controllers 5.3.1. Interrupt Control lers An 8 2 59A com pati ble interrupt contro l ler, within the chipset, pro v ides seven prioritized interr u pt levels. Of these, several are nor mally associated with the boa rd's onboard device interfac e s and contr ollers, and several are ava ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 36
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 36 5.4. BIOS Reco v er y In case the BIOS ne eds to be recovered: 1. Set Jum per J9 . 2. Start the MS EB X800/9 00. 3. Open the B IOS. 4. Rem ov e Jum per J9 . 5. Load the def ault BIOS settings. 6. Save the sett i ngs. 7. Restart the M SEBX800/900. Jumper J9 ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 37
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 37 6. D ESCRIPTION AND L O CA TION OF THE C ON NECT O RS Connector Structure Pin Remarks X1 Power In put 2 Power Jack X2 AT X Power Connector 20 X11 LVDS 2x 10 RM2.54 X14 Video IN 2 SMA X15 LCD 2x 25 RM2.54 X20 MIC IN - Phone Jack X22 Line Out Front - Phone Jack X27 SPDIF OUT - SPD I F X30A LPT 25 ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 38
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 38 6.1. Connector Plan ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 39
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 39 6.2. Connector Desc riptions X1 Pow er Input Pin Signal Pin Signal 1 8-30V DC- Input 2 Ground X2 ATX Conn ector Pin Signal Pin Signal 1 +3.3V 2 +3.3V 3 GND 4 +5V 5 GND 6 +5V 7 GND 8 PW R-OK 9 +5VSB 10 +12V 11 +3.3V 12 -12V 13 GND 14 PS-ON# 15 GND 16 GND 17 GND 18 -5V 19 +5V 20 +5V X11 LVDS Pin ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 40
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 40 X15 LCD Connector Pin Signal Pin Signal 1 DE_SP L IT 2 VSYNC 3 BLK 4 HSYNC 5 VCCLCD_ SB 6 Ground 7 NC 8 SHFCLK 9 VDD 10 D0 11 D1 12 D2 13 D3 14 D4 15 D5 16 D6 17 D7 18 D8 19 D9 20 D10 21 D11 22 D12 23 D13 24 D14 25 D15 26 Ground 27 D16 28 D17 29 D18 30 D19 31 D20 32 NC 33 D21 34 D22 35 D23 36 N ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 41
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 41 X30A Printer Po rt (Centronics, EM I-Filtered) D-SUB Connecto r : Signal Pin 1 Strobe Pin 2 Data 0 Pin 3 Data 1 Pin 4 Data 2 Pin 5 Data 3 Pin 6 Data 4 Pin 7 Data 5 Pin 8 Data 6 Pin 9 Data 7 Pin 10 Acknowledge Pin 11 Busy Pin 12 paper end Pin 13 select Pin 14 autofeed Pin 15 error Pin 16 init pr ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 42
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 42 X31 P S/2Keybo ar d ( A T Compatible) Pin Signal Pin Signal 1 KB_Dat a 2 - 3 GND 5 +5Volt / 100m A 6 KB_Clk 8 - X32 P S/2M ouse Pin Signal Pin Signal 1 MB_Data 2 - 3 GND 5 +5Volt / 100m A 6 MB_Clk 8 - X33A Ethernet L A N RJ-45 Pin Signal RJ-45 P in Signal 1 TX+ 2 T X- 3 RX+ 4 GND 5 GND 6 RX- 7 ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 43
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 43 RJ45 Connector 10 BaseT (IEEE 802.3i), 100BaseT X (IEEE 802.3u): MDI- P in EI A /TIA 568 A colors (wire/line) Pin Twisted Pair TX+ W hite / Green 1 3 TX- Green 2 3 RX+ White / Orange 3 2 GND .. 4 1 GND .. 5 1 RX- Orange 6 2 GND .. 7 4 GND .. 8 4 Cabling: Do not exc ee d 100m (328 feet); minimum ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 44
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 44 X52 A VR Pin Signal Pin Signal 1 AVR VCC 2 GND 3 AVR SC L 4 AVR RST 5 AVR MI S O 6 AVR MOSI Only for internal us e X53 Utility Pin Signal Pin Signal 1 SUSC 2 VCCBat T P 3 PS ON AT X 4 VCC5SB TP 5 System Reset 6 VCC3 TP 7 PW RBTN 8 VCC TP 9 GPIO 30 10 VCC1 2 TP 11 GPIO 31 12 G ND 13 GPIO 34 14 G ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 45
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 45 X62 3.5 " Hard Disk Pin Signal Pin Signal 1 Reset (ac t ive low) 2 GND 3 D7 4 D8 5 D6 6 D9 7 D5 8 D10 9 D4 10 D11 11 D3 12 D12 13 D2 14 D13 15 D1 16 D14 17 D0 18 D15 19 GND 20 (keypin) NC 21 DRQ 22 GND 23 IOW(active low) 24 GND 25 IOR(active low) 26 GND 27 IOCHRDY 2 8 ALE / Master- Slave N ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 46
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 46 X100 PC/104 Conne ctor (ISA) Pin A: B: C: D : 0 Ground Ground 1 IOCHCK Ground SB HE MEMCS16 2 SD7 RESET LA23 IOCS16 3 SD6 +5V LA22 IRQ10 4 SD5 IRQ9 LA21 IRQ11 5 SD4 NC LA20 IRQ12 6 SD3 DRQ2 LA19 IRQ15 7 SD2 (- 1 2V) NC LA18 IRQ14 8 SD1 0W S LA17 DACK0 9 SD0 +12V MEMR DR Q0 10 IOCHRDY Ground NC ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 47
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 47 X101 PC/104+ Connecto r (PCI) Pin A: B: C: D: 1 GND/5.0 V KEY2 Reserved +5 AD00 2 VI/O AD02 AD01 +5V 3 AD05 GND AD04 AD03 4 C/BE0* AD07 G ND AD06 5 GND AD09 AD08 GND 6 AD11 VI/O AD10 M66EN 7 AD14 AD13 GND AD12 8 +3.3V C/BE1* AD15 +3.3V 9 SERR* GND SB0* PAR 10 GND PERR* +3.3V SDONE 11 STOP* +3.3 ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 48
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 48 X120 M i niPCI Interface Pin Signal Pin Signal Pin Signal Pin Signal 1 T IP 2 RING 63 3.3V 64 FRAME# 3 8PMJ-3 4 8PMJ-1 65 CLKRU N# 66 TRDY# 5 8PMJ-6 6 8PMJ-2 67 SER R# 68 STOP# 7 8PMJ-7 8 8PMJ-4 69 G ROUND 70 3.3V 9 8PMJ-8 10 8PMJ-5 71 PERR# 72 DEVSEL# 11 LED1_GRNP 12 LED2_YELP 73 C/B E[1 ]# 74 ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 49
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 49 X130 PCI Slot (Standa rd PCI Slot) Pin Name PCI Pin Descript ion Pin Name PCI Pin Description A1 TRST Test Logic Reset B1 -12V -12 VDC A2 +12V +1 2 VDC B2 TCK T est Clock A3 TMS Test Mde Select B3 GND Ground A4 TDI Test Data Input B4 TDO Test Data Output A5 +5V +5 VDC B5 +5V +5 VDC A6 INTA Inte ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 50
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 50 7. J UMPER L OC A TIONS ON THE B O A R D The f o llowing ta b les s how the locati on of the jum per block s on th e MS E BX80 0/9 00 b oard. T he num bers shown in these tables are silk screened on the board so that the pins can be easily located. This chapter refers to the ind i vidual pins f ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 51
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 51 7.3. Jumpers on the MSEBX800 ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 52
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 52 8. I NDEX A Addressing PCI Devic es............................................. 31 B BIOS Recovery .......................................................... 36 Block Diagrams .......................................................... 13 Boot Time .............................................. ...
-
DIGITAL-LOGIC MICROSPACE MSEBX800 - page 53
DIGITAL-LOGIC AG MSEBX800/900 Deta iled Manual V1.0 53 Mounting................................................................ 25 Specifications ............................................................. 15 SQS............................................................................ 11 Standards .............................................. ...
Hai una domanda su DIGITAL-LOGIC MICROSPACE MSEBX800?
Utilizza il modulo sottostante
Se non hai risolto il problema con DIGITAL-LOGIC MICROSPACE MSEBX800 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con DIGITAL-LOGIC MICROSPACE MSEBX800 è probabile che voglia condividere il modo di risolverlo.