Manuale per l’uso Roland gp-7

14 pagine 0.54 mb
Scarica

Vai alla pagina of 14

Summary
  • Roland gp-7 - page 1

    Digital Piano Model: V-Piano Grand Date: Jun. 1, 2011 Version: 1.00 1 (GP-7) MIDI Implementation 1. Receive data * “†” marked parameters are recognized by only GM2 sound generator. ■ Channel Voice Messages ● Note off Status 2nd byte 3rd byte 8nH kkH vvH 9nH kkH 00H n = MIDI channel number: 0H - FH (ch.1 - 16) kk = note number: 00H - 7FH ( ...

  • Roland gp-7 - page 2

    2 MIDI Implementation ❍ Resonance (Controller number 71) † Status 2nd byte 3rd byte BnH 47H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv= Resonance value (relative change): 00H - 7FH (-64 - 0 - +63) ❍ Release Time (Controller number 72) † Status 2nd byte 3rd byte BnH 48H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Release T ...

  • Roland gp-7 - page 3

    3 MIDI Implementation ■ Channel Mode Messages ● All Sounds Off (Controller number 120) Status 2nd byte 3rd byte BnH 78H 00H n = MIDI channel number: 0H - FH (ch.1 - 16) * When this message is received, all notes currently sounding on the corresponding channel will be turned off. ● Reset All Controllers (Controller number 121) Status 2nd byte ...

  • Roland gp-7 - page 4

    4 MIDI Implementation ❍ GM System Off † Status Data byte Status F0H 7EH, 7F, 09H, 02H F7H Byte Explanation F0H Exclusive status 7EH ID number (Universal Non-realtime Message) 7FH Device ID (Broadcast) 09H Sub ID#1 (General MIDI Message) 02H Sub ID#2 (General MIDI Off) F7H EOX (End Of Exclusive) ● Universal Realtime System Exclusive Messages ? ...

  • Roland gp-7 - page 5

    5 MIDI Implementation ❍ Channel Pressure † Status Data byte Status F0H 7FH, 7FH, 09H, 01H, 0nH, ppH, rrH F7H Byte Explanation F0H Exclusive status 7FH ID number (universal realtime message) 7FH Device ID (Broadcast) 09H Sub ID#1 (Controller Destination Setting) 01H Sub ID#2 (Channel Pressure) 0nH MIDI Channel (00 - 0F) ppH Controlled parameter ...

  • Roland gp-7 - page 6

    6 MIDI Implementation ❍ Data set 1 (DT1) This is the message that actually performs data transmission, and is used when you wish to transmit the data. Status Data byte Status F0H 41H, dev, 00H, 00H, 39H, 12H, aaH, bbH, F7H ccH, ddH, eeH, ... ffH, sum Byte Explanation F0H Exclusive status 41H ID number (Roland) dev Device ID (dev: 10H, 7FH) 00H Mo ...

  • Roland gp-7 - page 7

    7 MIDI Implementation ● Active Sensing Status FEH * This message is transmitted at intervals of approximately 250 msec. ■ System Exclusive Messages Universal Non-realtime System Exclusive Message and Data Set 1 (DT1) are the only System Exclusive messages transmitted by the V-Piano Grand. ● Universal Non-realtime System Exclusive Message ❍ ...

  • Roland gp-7 - page 8

    8 MIDI Implementation | | | A0 - C8 | |# 01 76 | 0000 0000 | | | | 0aaa aaaa | Tone EQ Zone 3 Key Upper (21 - 108) | | | | A0 - C8 | |# 01 78 | 0000 0000 | | | | 000a aaaa | Tone EQ Zone 3 Frequency (0 - 30) | | | | 16,20,25,31,40,50,63,80,100,125,160, | | | | 200,250,315,400,500,630,800,1000, | | | | 1250,1600,2000,2500,3150,4000,5000, | | | | 630 ...

  • Roland gp-7 - page 9

    9 MIDI Implementation | 00 19 | 000a aaaa | System Center Pedal Assign 2 (0 - 17) | | | | OFF, SOFT, SOSTENUTO, | | | | MASTER VOLUME, EXPRESSION, | | | | AMBIENCE LEVEL, | | | | SOUND LIFT, STRING RESONANCE, | | | | DAMPER RESONANCE, SOUNDBOARD RESO, | | | | KEY OFF RESONANCE, UNISON TUNE, | | | | HAMMER HARDNESS, CROSS RESONANCE, | | | | DECAY TI ...

  • Roland gp-7 - page 10

    10 MIDI Implementation | | | DECAY TIME, TONE COLOR, | | | | DAMPING TIME, DAMPER NOISE LEVEL | | 01 22 | | <Reserved> | | 01 23 | | <Reserved> | | 01 24 | 000a aaaa | Setup FC2 Assign 2 (0 - 17) | | | | OFF, SOFT, SOSTENUTO, | | | | MASTER VOLUME, EXPRESSION, | | | | AMBIENCE LEVEL, | | | | SOUND LIFT, STRING RESONANCE, | | | | DAMPER ...

  • Roland gp-7 - page 11

    11 MIDI Implementation ■ Decimal and Hexadecimal Table (An “H” is appended to the end of numbers in hexadecimal notation.) In MIDI documentation, data values and addresses/sizes of Exclusive messages, etc. are expressed as hexadecimal values for each 7 bits. The following table shows how these correspond to decimal numbers. +—————? ...

  • Roland gp-7 - page 12

    12 MIDI Implementation ■ Example of an Exclusive Message and Calculating a Checksum Roland Exclusive messages (RQ1, DT1) are transmitted with a checksum at the end (before F7) to make sure that the message was correctly received. The value of the checksum is determined by the address and data (or size) of the transmitted Exclusive message. ● Ho ...

  • Roland gp-7 - page 13

    13 Function... Basic Channel Mode Note Number : Velocity After Touch Pitch Bend Control Change Transmitted Recognized Remarks Default Changed Default Messages Altered True Voice Note On Note Off Key’s Channel’s 0, 32 1 2 4 5 6, 38 7 8 10 11 16 17 18 19 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 80 81 82 83 84 91 92 93 94 95 100, 101 1–16 1? ...

  • Roland gp-7 - page 14

    14 Correspondence Between Preset Tones and Program Changes To select any of the sounds listed below, transmit the relevant Program Change on the channel that's been set for V-Piano Rx Channel (default value: ch. 1). Bank Select Program Number Tone Name MSB LSB - - 001 Vintage Piano 1 - - 002 V1 Studio - - 003 V1 Concert - - 004 V1 Session - - ...

Fabbricante Roland Categoria Electronic Keyboard

I documenti che otteniamo dal fabbricante del dispositivoRoland gp-7 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Roland
- manuali per l’uso gp-7
- schede prodotto Roland
- opuscoli
- o etichette energetiche Roland gp-7
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Roland gp-7.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Roland gp-7, manuali di manutenzione, brevi manuali o manuali utente Roland gp-7. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Roland gp-7.

Manuali per l’uso simili

Manuale completo del dispositivo Roland gp-7, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Roland gp-7 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Roland gp-7.

Il manuale per l’uso completo Roland, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Roland gp-7 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Roland gp-7, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Roland gp-7 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Roland gp-7 - che ci dovrebbe aiutare nei primi passi durante l'uso Roland gp-7
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Roland gp-7
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Roland gp-7 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Roland gp-7?

Utilizza il modulo sottostante

Se non hai risolto il problema con Roland gp-7 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Roland gp-7 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)