Italiano dropdown-ico

Manuale per l’uso Graco 308-017

32 pagine 0.65 mb
Scarica

Vai alla pagina of 32

Summary
  • Graco 308-017 - page 1

    INSTRUCTIONS–P ARTS LIST 308-017 Rev D Supersedes C This manual contains IMPORT ANT W ARNINGS AND INSTRUCTIONS READ AND RET AIN FOR REFERENCE Check-Mate  450 Pumps With Priming Piston, and Severe-Duty Rod and Cylinder Model 222-770, Series A, 10:1 Ratio Monark  Pump 125 bar (1800 psi) MAXIMUM FLUID WORKING PRESSURE 12.5 bar (180 psi) MAXIMU ...

  • Graco 308-017 - page 2

      SAFETY W ARNINGS HIGH PRESSURE FLUID CAN CAUSE SERIOUS INJUR Y . FOR PROFESSIONAL USE ONL Y. OBSER VE ALL W ARNINGS. Read And Understand All Instruction Manuals Before Operating Equipment. MOVING P ARTS HAZARD KEEP HANDS AND FINGERS A WA Y FROM THE PRIMING PIST ON DURING OPERA TION AND WHENEVER THE PUMP IS CHARGED WITH AIR ...

  • Graco 308-017 - page 3

     3 EQUIPMENT MISUSE HAZARD General Safety Any misuse of the spray/dispensing equipment or accessories, such as overpressurizing, modifying parts, using incompatible chemicals and flu - ids, or using worn or damaged parts, can cause them to rupture and result in fluid injection, splashing in the eyes or on the skin, or other ser ...

  • Graco 308-017 - page 4

    4  TYPICAL INST ALLA TION KEY A Pump B 19 Liter (5 Gal.) Pail Ram C Wiper Plate D Air Manifold E Pump Runaway V alve F Air Line Lubricator G Bleed-T ype Master Air V alve (required, for pump) H Pump Air Regulator J Air Line Filter K Bleed-T ype Master Air V alve (for accessories) L Fluid Drain V alve (required) M Fluid Pressure ...

  • Graco 308-017 - page 5

     5 INST ALLA TION NOTE: Reference numbers and letters in parentheses in the text refer to the callouts in the figures and the parts drawing. See pages 22 and 23 for accessories available from Graco. If you supply your own accessories, be sure they are adequately sized and pressure- rated to meet the system’ s requirements. Th ...

  • Graco 308-017 - page 6

    6  OPERA TION/MAINTENANCE Pressure Relief Procedure T o reduce the risk of serious bodily injury , including fluid injection, splashing in the eyes or on the skin, or injury from moving parts, always follow this proce- dure whenever you shut of f the pump, when check - ing or servicing any part of the spray/dispensing sys - tem ...

  • Graco 308-017 - page 7

     7 Shutdown and Care of the Pump For overnight shutdown, follow the Pressure Relief Pro - cedure W arning on page 6. Always stop the pump at the bottom of the stroke to prevent the fluid from drying on the exposed displacement rod and damaging the throat packings. Always flush the pump before the fluid dries on the dis- placeme ...

  • Graco 308-017 - page 8

    8  TROUBLESHOOTING CHART PROBLEM CAUSE SOLUTION Pump fails to operate Restricted line or inadequate air supply Clear; see TECHNICAL DA T A on pages 24-29. Obstructed fluid hose or gun/valve; fluid hose ID is too small Open, clear*; use hose with larger ID. Fluid dried on the displacement rod Clean; always stop pump at bottom of ...

  • Graco 308-017 - page 9

     9 SERVICE REQUIRED T OOLS  T orque wrench  Bench vise, with soft jaws  Hammer  Rubber mallet  13 mm (1/2”) dia. brass rod  O-ring pick  11 mm, 12 mm, 19 mm, 22 mm, 26 mm, and 28 mm open-end wrenches  17 mm box or socket wrench  32 mm crow’s-foot wrench  400 mm adjustable wrench  Set of adju ...

  • Graco 308-017 - page 10

    10  DISPLACEMENT PUMP SER VICE Disassembly When disassembling the pump, lay out all removed parts in sequence, to ease reassembly . Refer to Fig 6. NOTE: Repair Kit 222-773 is available to replace the pis - ton and intake valve seals. For the best results, use all the new parts in the kit. Kit parts are marked with one asterisk ...

  • Graco 308-017 - page 11

     11 Fig 6 2 10 11 * 13 33 14 *15 *1 1 S (SEE FIG 5) *21 22 31 30 23 16 24 **4 **5 **6 3** LIPS OF V -P ACKINGS MUST F ACE DOWN THROA T P ACKING DET AIL 8 REMOVE ONL Y IF DAMAGED. 12 1 *9 25 19 *20 18 0425A 35 DET AIL OF PIST ON AND INT AKE CHECK V AL VE 12 (REF) 1 (REF) 24 (REF) 17 (REF) 17 42 V AL VE HOUSING VA L VE HANDLE (RE ...

  • Graco 308-017 - page 12

    12  Reassembly (Refer to Fig 7) 1. Place a 13 mm (1/2 in.) dia. brass rod lengthwise in a vise. Install a new piston seal (15*) on the piston seat. Apply thread sealant to the threads of the piston seat. Place the piston guide (14) securely on the brass rod. Using a 32 mm crow’ s-foot, screw the pis - ton seat (16) into the p ...

  • Graco 308-017 - page 13

     13 Fig 7 10 11 * 13 33 14 15* *1 1 S (SEE FIG 5) *21 31 **4 **5 **6 3** LIPS OF V -P ACKINGS MUST F ACE DOWN THROA T P ACKING DET AIL 1 *9 *20 0425A DET AIL OF PIST ON AND INT AKE CHECK V AL VE 12 (REF) 1 (REF) 24 (REF) 17 (REF) 42 16 APPL Y THREAD SEALANT AND T ORQUE TO 45-53 N.m (33-39 ft-lb) 8 REMOVE ONL Y IF DAMAGED. T ORQ ...

  • Graco 308-017 - page 14

    14  NOTES: ...

  • Graco 308-017 - page 15

     15 P ARTS DRA WINGS AND P ARTS LISTS ...

  • Graco 308-017 - page 16

    16  P ARTS DRA WING AND LIST Model 222-770, Series A 10:1 Ratio Monark Pump Includes items 101-1 11 REF P ART NO. NO. DESCRIPTION QTY 101 222-791 AIR MOTOR, Monark See 307-043 for parts 1 102 184-076 ROD, tie; 295 mm (1 1.61”) shoulder to shoulder 3 103 184-092 ROD, adapter 1 104 184-059 NUT , coupling 1 105 184-128 COLLAR, c ...

  • Graco 308-017 - page 17

     17 P ARTS DRA WING AND LIST Model 222-768, Series A 20:1 Ratio President Pump Includes items 101-1 11 REF P ART NO. NO. DESCRIPTION QTY 101 222-772 AIR MOTOR, President See 306-982 for parts 1 102 184-076 ROD, tie; 295 mm (1 1.61”) shoulder to shoulder 3 103 184-091 ROD, adapter 1 104 184-059 NUT , coupling 1 105 184-128 COL ...

  • Graco 308-017 - page 18

    18  P ARTS DRA WING AND LIST Model 222-769, Series A 34:1 Ratio Senator Pump With Standard Air Motor Includes items 101-1 10 Model 224-660, Series A 34:1 Ratio Senator Pump With Quiet Air Motor Includes items 101-1 10 REF P ART NO. NO. DESCRIPTION QTY 101 217-540 AIR MOT OR, Senator , standard Used on Model 222-769; See 307-592 ...

  • Graco 308-017 - page 19

     19 P ARTS DRA WING AND LIST Model 222-778, Series A 55:1 Ratio Bulldog Pump With Standard Air Motor Includes items 101-1 10 Model 222-813, Series A 55:1 Ratio Bulldog Pump With Quiet Air Motor Includes items 101-1 10 REF P ART NO. NO. DESCRIPTION QTY 101 208-356 AIR MOT OR, Bulldog, standard Used on Model 222-778 See 307-049 f ...

  • Graco 308-017 - page 20

    20  P ARTS DRA WING Model 222-790, Series B Displacement Pump Includes items 1-42 1 (REF) 2 TORQUE T O 45-53 N.m (33-39 ft-lb) 3** LIPS OF V -P ACKINGS MUST F ACE DOWN **5 **6 *9 10 *1 1 13 14 15* 12 TORQUE T O 256-297 N.m (190-220 ft-lb) 16 APPL Y THREAD SEALANT AND TORQUE T O 27-34 N.m (20-25 ft-lb) 24 APPL Y THREAD SEALANT A ...

  • Graco 308-017 - page 21

     21 P ARTS LIST Model 222-790, Series B Displacement Pump Includes items 1-42 REF P ART NO. NO. DESCRIPTION QTY 1 184-041 ROD, displacement; sst 1 2 184-039 NUT , packing; carbon steel 1 3 109-302** V -P ACKING;  2 4 184-058** GLAND, female; sst 1 5 109-252** V -P ACKING; UHMWPE 3 6 184-126** GLAND, male; sst 1 8 184-037 NIP ...

  • Graco 308-017 - page 22

      ACCESSORIES USE GENUINE GRACO P ARTS AND ACCESSORIES Must be purchased separately . GROUNDING CLAMP 103-538 GROUND WIRE 208-950 7.6 m (25 ft) long, 1.5 mm  (12 gauge) BLEED-TYPE MASTER AIR V AL VE 21 bar (300 psi) MAXIMUM WORKING PRESSURE 107-141 3/4 npt(m) inlet x 3/4 npt(f) outlet 107-142 1/2 npt(m) inlet x 1/2 npt ...

  • Graco 308-017 - page 23

     23 ACCESSORIES USE GENUINE GRACO P ARTS AND ACCESSORIES Must be purchased separately . NYLON FLUID HOSE 184-138 3/4 npt (mbe); 4.8 m (15 ft) long 276 bar (4000 psi) MAXIMUM WORKING PRESSURE 184-139 1/2 npt (mbe); 1.5 m (5 ft) long 184-156 1/2 npt (mbe); 6.1 m (20 ft) long 350 bar (5000 psi) MAXIMUM WORKING PRESSURE FLUID DRAIN ...

  • Graco 308-017 - page 24

    24  TECHNICAL AND PERFORMANCE DA T A (MODEL 222–770) Ratio 10:1 (Monark Air Motor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum fluid working pressure 125 bar (1800 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum air in ...

  • Graco 308-017 - page 25

     25 TECHNICAL AND PERFORMANCE DA T A (MODEL 222–768) Ratio 20:1 (President Air Motor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum fluid working pressure 250 bar (3600 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum air inp ...

  • Graco 308-017 - page 26

    26  TECHNICAL AND PERFORMANCE DA T A (MODEL 222–769) Ratio 34:1 (Standard Senator Air Motor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum fluid working pressure 238 bar (3400 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum air input pres ...

  • Graco 308-017 - page 27

     27 TECHNICAL AND PERFORMANCE DA T A (MODEL 224–660) Ratio 34:1 (Quiet Senator Air Motor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum fluid working pressure 238 bar (3400 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum air input p ...

  • Graco 308-017 - page 28

    28  TECHNICAL AND PERFORMANCE DA T A (MODEL 222–778) Ratio 55:1 (Standard Bulldog Air Motor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum fluid working pressure 347 bar (4950 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum air input pres ...

  • Graco 308-017 - page 29

     29 TECHNICAL AND PERFORMANCE DA T A (MODEL 222–813) Ratio 55:1 (Quiet Bulldog Air Motor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum fluid working pressure 347 bar (4950 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum air input p ...

  • Graco 308-017 - page 30

    30  Pump A B C D Model 222-770 1 188 mm 365 mm 826 mm 328 mm (46.75 in.) (14.35 in.) (32.5 in.) (12.9 in.) 222-768 1251 mm 418 mm 832 mm 328 mm (49.25 in.) (16.45 in.) (32.75 in.) (12.9 in.) 222-769, 1400 mm 570 mm 830 mm 322 mm 224-660 (55.1 in.) (22.4 in.) (32.7 in.) (12.7 in.) 222-778, 1400 mm 570 mm 830 mm 322 mm 222-813 (5 ...

  • Graco 308-017 - page 31

     31 MOUNTING HOLE LA YOUTS MODEL 222-768 PRESIDENT PUMP MODEL 222-770 MONARK PUMP 63.5 mm (2.50”) 22.2 mm (0.875”) 62.50 mm (2.461”) 38.5 mm (1.516”) 31.2 mm (1.230”) 54.1 mm (2.131”) 44.5 mm (1.750”) 7.1 mm (0.281”) DIA. (2) 1 1.4 mm (0.449”) DIA. (3) 63.5 mm (2.50”) 54.1 mm (2.130”) 31.25 mm (1.230”) 6 ...

  • Graco 308-017 - page 32

    32  THE GRACO W ARRANTY AND DISCLAIMERS W ARRANTY Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workman - ship on the date of sale by an authorized Graco distributor to the original purchaser for use. As purchaser ’ s sole remedy for breach of this warranty , Grac ...

Fabbricante Graco Categoria Marine Sanitation System

I documenti che otteniamo dal fabbricante del dispositivoGraco 308-017 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Graco
- manuali per l’uso 308-017
- schede prodotto Graco
- opuscoli
- o etichette energetiche Graco 308-017
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Graco 308-017.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Graco 308-017, manuali di manutenzione, brevi manuali o manuali utente Graco 308-017. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Graco 308-017.

Manuali per l’uso simili

Manuale completo del dispositivo Graco 308-017, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Graco 308-017 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Graco 308-017.

Il manuale per l’uso completo Graco, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Graco 308-017 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Graco 308-017, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Graco 308-017 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Graco 308-017 - che ci dovrebbe aiutare nei primi passi durante l'uso Graco 308-017
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Graco 308-017
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Graco 308-017 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Graco 308-017?

Utilizza il modulo sottostante

Se non hai risolto il problema con Graco 308-017 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Graco 308-017 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)