Italiano dropdown-ico

Manuale per l’uso Optoma EH7700

81 pagine Non applicabile
Scarica

Vai alla pagina of 81

Summary
  • Optoma EH7700 - page 1

    1 English T able of Contents ............................ 1 Usage Notice ................................... 2 Safety Information ...............................2 Precautions .........................................3 Eye Safety Warnings ..........................5 Product Features ................................5 Introduction .................... ...

  • Optoma EH7700 - page 2

    2 English Usage Notice Safety Information The lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons. The exclamation point within an eq ...

  • Optoma EH7700 - page 3

    3 English Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user ’s guide. ▀ ■ W arning- Do not look into the projector ’s lens when the lamp is on. The bright light may hurt and damage your eyes. ▀ ■ W arning- T o reduce the risk of re or electric shock, do not expose this projec ...

  • Optoma EH7700 - page 4

    4 English Usage Notice ▀ ■ W arning- Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The dimensions shown here indicate the minimum space required. If the projector is to be built into a compart - ment or similarly enclosed, these minimum di ...

  • Optoma EH7700 - page 5

    5 English Usage Notice Eye Safety W arnings ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀ ■ In order to minimize the lamp power, us ...

  • Optoma EH7700 - page 6

    6 English Introduction Documentation :  User ’s Manual  W arranty Card  Quick Start Card  WEEE Card (for EMEA only)  Due to different applications in each country , some regions may have different accessories. Power Cord 3.0 m Package Overview Unpack and inspect the box contents to ensure all parts listed below are i ...

  • Optoma EH7700 - page 7

    7 English Introduction 12V OUT RS232 R G B H V S-VIDEO VIDEO Y Pb Pr HDMI 2 HDMI 1 VGA-OUT VGA 2-IN VGA 1-IN WIRED REMOTE-IN SOURCE INFO. MENU SHUTTER ENTER RE-SYNC LENS FOCUS ZOOM POWER LAMP-1 LAMP-2 TEMP Product Overview 1. V entilation (inlet) 2. Lens Door 3. IR Receivers 4. Lamp Door 5. V entilation (outlet) 6. Indicator LED 7. Projector Cap 8. ...

  • Optoma EH7700 - page 8

    8 English Introduction 12V OUT RS232 R G B H V S-VIDEO VIDEO Y Pb Pr HDMI 2 HDMI 1 VGA-OUT VGA 2-IN VGA 1-IN WIRED REMOTE-IN SOURCE INFO. MENU SHUTTER ENTER RE-SYNC LENS FOCUS ZOOM 1 6 1. Power button 2. SOURCE 3. RE-SYNC 4. LENS 5. Information 6. SHUTTER 7. MENU 8. Four Directional Select Keys 9. ENTER 10. ZOOM 1 1. FOCUS Control Panel 2 5 7 8 3 4 ...

  • Optoma EH7700 - page 9

    9 English Introduction 12V OUT RS232 R G B H V S-VIDEO VIDEO Y Pb Pr HDMI 2 HDMI 1 VGA-OUT VGA 2-IN VGA 1-IN WIRED REMOTE-IN SOURCE INFO. MENU SHUTTER ENTER RE-SYNC LENS FOCUS ZOOM Input/Output Connections 1. S-Video Input Connector 2. Composite Video Input Connector 3. Component Video Input Connector (YPbPr) 4. BNC Input Connector (YPbPr/RGBHV) 5. ...

  • Optoma EH7700 - page 10

    10 English Introduction Remote Control 1. Power On 2. Shutter 3. Function 2 (Program- mable see P .51) 4. Display Mode 5. Freeze 6. Lens Zoom +/- 7. All 8. HDMI 2 9. HDMI 1 10. DVI (Reserved Key) 1 1. Information 12. Re-Sync 13. Video 14. YPbPr 15. Numbered keypad (for password input) 16. Power Off 17. Pattern 18. Function 1 (Program- mable see P . ...

  • Optoma EH7700 - page 11

    11 English Installation Connecting the Projector Install the Projection Lens 1 2 5  Before install or replacing the lens, switch off the power to the projector  Avoid using the remote control or projector keypad button to adjust the lens shift or zoom/ focus while the lens attachment process is carried out. Install Lens Procedure: 1. Un ...

  • Optoma EH7700 - page 12

    12 English Installation 12V OUT RS232 R G B H V S-VIDEO VIDEO Y Pb Pr HDMI 2 HDMI 1 VGA-OUT VGA 2-IN VGA 1-IN WIRED REMOTE-IN SOURCE INFO. MENU SHUTTER ENTER RE-SYNC LENS FOCUS ZOOM E62405SP R Connect to Computer/Notebook 1 5 4 3 1.................................................................................................... Power Cord 2...... ...

  • Optoma EH7700 - page 13

    13 English Installation 12V OUT RS232 R G B H V S-VIDEO VIDEO Y Pb Pr HDMI 2 HDMI 1 VGA-OUT VGA 2-IN VGA 1-IN WIRED REMOTE-IN SOURCE INFO. MENU SHUTTER ENTER RE-SYNC LENS FOCUS ZOOM E62405SP R Connect to Video Sources 1.................................................................................................... Power Cord 2.................. ...

  • Optoma EH7700 - page 14

    14 English Installation 12V OUT RS232 R G B H V S-VIDEO VIDEO Y Pb Pr HDMI 2 HDMI 1 VGA-OUT VGA 2-IN VGA 1-IN WIRED REMOTE-IN SOURCE INFO. MENU SHUTTER ENTER RE-SYNC LENS FOCUS ZOOM Powering the projector On / Off  Turn on the projector rst and then select the signal sources. Powering On the Projector 1. Remove th e projector cap. 1 2. Sec ...

  • Optoma EH7700 - page 15

    15 English Installation Powering Off the Projector 1. Press the “ ” button on the remote control or press the “ ” button on the control panel to turn off the projector . 4 The following message will be displayed on the screen. Press the “ ” button on the remote control or press the “ ” button on the control panel again 4 to conrm ...

  • Optoma EH7700 - page 16

    16 English Installation  Contact the nearest service center if the projector displays these symptoms. See pages 78-79 for more information. W arning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown:  “LAMP1” or “LAMP2” LED indicator is lit red and if “POWER ” LED indicator  ...

  • Optoma EH7700 - page 17

    17 English Installation Adjusting the Projected Image Adjusting the Projector ’ s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector . 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. ...

  • Optoma EH7700 - page 18

    18 English Installation Adjusting the Projector ’ s Position T o determine where to position the projector , consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Example:  ST1 Lens: The projector will focus at distances from 3.08 to 68.6 feet (0.9 ...

  • Optoma EH7700 - page 19

    19 English Installation  This table is for user ’s reference only . Optoma Model Name WT1 WT2 ST1 TZ1 TZ2 Focal Length (f) (mm) 1 1.73 18.1~21.72 21.5~28.7 28.6~54.33 54.06~102.7 F number 2.2 2.2-3.33 2.0-3.0 2.2-3.0 2.3~3.16 Zoom Range (Ratio) Fixed 1.2x 1.33x 1.9x 1.9x Zoom & Focus Adjust - ment Motorized Throw Ratio 0.77 1.2~1.45 1.45~1 ...

  • Optoma EH7700 - page 20

    20 English User Controls Using the Control Panel Power Refer to the “Power On/Off the Projector” section on pages 14-15. SOURCE Press “SOURCE” to select an input signal. RE-SYNC Automatically synchronize the projector to the input source. LENS Adjust Lens shift up/down/left/right Information Display the projection’s information. SHUTTER O ...

  • Optoma EH7700 - page 21

    21 English User Controls Remote Control Using the Remote Control Power On Refer to the “Power On/Off the Projector” section on pages 14-15. Power Off Refer to the “Power On/Off the Projector” section on pages 14-15. Function 2 Adjust Function 2 settings. Lens Zoom +/- Adjust lens zoom function. Lens Shift Adjust lens shift function. Pattern ...

  • Optoma EH7700 - page 22

    22 English User Controls Using the Remote Control Numbered keypad Press “0~9” to input a password in the “Se - curity” settings. Freeze Press “Freeze” to pause the screen image. Press this button again to unlock. Shutter Open/close the built-in shutter . Function 1 Adjust Function 1 settings. Lens Focus +/- Adjust lens focus function. E ...

  • Optoma EH7700 - page 23

    23 English User Controls Using a Wire Remote Control T o connect the projector and remote control with a 3.5mm mini jack commercial cable through the “wire remote in” terminal to control the projector . 12V OUT RS232 R G B H V S-VIDEO VIDEO Y Pb Pr HDMI 2 HDMI 1 VGA-OUT VGA 2-IN VGA 1-IN WIRED REMOTE-IN SOURCE INFO. MENU SHUTTER ENTER RE-SYNC L ...

  • Optoma EH7700 - page 24

    24 English User Controls Remote Code Setting Default code setting (common code): 00 The default code of remote control can be set by pressing "All" key continuously until LED indicator quickly blinking 3 times. (around 3 seconds) Regardless of projector ’s remote code, the remote control can operate each projector simultaneously if the ...

  • Optoma EH7700 - page 25

    25 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. How to operate 1. T o open the OSD menu, press “Menu” on the Remote Control or Projector Keypad. 2 When OSD is displayed, use keys to select any item in the main menu. While making a selectio ...

  • Optoma EH7700 - page 26

    26 English User Controls Menu T ree EH7700 OSD Menu Tree.xls Main Menu Sub Menu Settings Image Display Mode Brightness -50 ~ +50 Contrast -50 ~ +50 Sharpness 0~15 Color -50 ~ +50 Tint -50 ~ +50 Advanced Noise Reduction 0 ~ 10 0 ~ 10 Gamma Film / Graphics / 1.8 / 2.0 / 2.2 / 2.6 True Vivid 0 ~ 5 Color Temp. Warm / Medium / Cold Color Space AUTO / RG ...

  • Optoma EH7700 - page 27

    27 English User Controls  Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using.  ( #1 ) “Color” and “T int” are only supported in Video mode.  ( #2 ) For HDMI model only .  ( #3 ) Input 1920x1200 or 1600x1200 resolution, 16:9 selection of ...

  • Optoma EH7700 - page 28

    28 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images.  Presentation: Good color and brightness from PC input.  Bright: Maximum brightness from PC input.  Movie: For home theater .  sRGB: Standardised accurate color .  Blackboard: This mode should be selected to achieve optim ...

  • Optoma EH7700 - page 29

    29 English User Controls Sharpness Adjust the sharpness of the image.  Press the to decrease the sharpness.  Press the to increase the sharpness. Color Adjust a video image from black and white to fully saturated color .  Press the to decrease the amount of saturation in the image.  Press the to increase the amount of saturation in the ...

  • Optoma EH7700 - page 30

    30 English User Controls IMAGE | Advanced Noise Reduction The motion Adaptive Noise Reduction reduces the amount of visible noise interlaced signals. The range is from “0” to “10”. (0: Off) BrilliantColor™ This adjustable item utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providi ...

  • Optoma EH7700 - page 31

    31 English User Controls Color Space Select an appropriate color matrix type from AUTO, RGB, RGB(0-255) (*) RGB(16-235) (*) or YUV . Dynamic Black Dynamic Black enables the projector to automatically optimize the the brightness of the display during dark/light movie scenes to be shown in incredible detail. RGB Gain/Bias Press into the next menu as ...

  • Optoma EH7700 - page 32

    32 English User Controls  Hue/Saturation/Gain/Exit: Using Hue, Saturation and Gain setting to adjust the color is selecting.  White : Use or to select Red, Green and Blue Colors.  R/G/B/Exit : Using R (Red) ,G (Green) and B(Blue) settings to adjust the color temperature of white point.  Reset: Choose “Y es” to return the factory def ...

  • Optoma EH7700 - page 33

    33 English User Controls DISPLA Y Format Use this function to choose your desired aspect ratio.  4:3: This format is for 4×3 input sources.  16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV .  16:10: This format is for 16x10 input sources like high resolution computer graphical applications and f ...

  • Optoma EH7700 - page 34

    34 English User Controls Auto If this format is select, Screen type will auto become 16:10 (1920 x 1200) If source is 4:3, auto resize to 1600 x1200 If source is 16:9 auto resize to 1920x1080 If source is 16:10 auto resize to 1920x1200 16:9 Screen 480i/p 576i/p 1080i/p 720p PC 4:3 1440 x 1080 center 16:9 1920 x 1080 center LBX 1920 x 1440 center , ...

  • Optoma EH7700 - page 35

    35 English User Controls V Keystone Press the or to adjust image distortion vertically . If the image looks trapezoidal, this option can help make the image rectangular . Auto Keystone Automatically adjusts vertical image distortion. H ARC Corrects optical pincushion distortion horizontally . V ARC Corrects optical pincushion distortion vertically ...

  • Optoma EH7700 - page 36

    36 English User Controls Screen  Single: Projection single screen.  PIP Window: Main Screen is large screen; PIP Screen is small and displays in the corner of the main screen.  Split Screen: Main Screen and PIP Screen equal size and side by side. PIP Location Choose the PIP screen position on the display screen. PIP Size Choose the PIP siz ...

  • Optoma EH7700 - page 37

    37 English User Controls SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to nalize the selection. Projection  Front-Desktop This is the default selection. The image is projected straight on the screen.  Rear-Desktop  Rear-Desktop ...

  • Optoma EH7700 - page 38

    38 English User Controls When selected, the image will appear reversed.  Front-Ceiling When selected, the image will turn upside down.  Rear-Ceiling When selected, the image will appear reversed in upside down position. Screen T ype Choose the screen type from16:10 (1920 x 1200) or 16:9 (1920 x 1080). Menu Location Choose the menu location on ...

  • Optoma EH7700 - page 39

    39 English User Controls SETUP | Lens Function Focus Adjust focus function on the projected image. Zoom (Optical Zoom) Adjust zoom function on the projected image. Lens Shift Adjust the lens shift up/down/left/right. Lens Function Shift the projected image.  Lock: This function can not be used by user .  Unlock: This function can be used by u ...

  • Optoma EH7700 - page 40

    40 English User Controls SETUP | Security Security  On: Choose “On” to use security verication when turning on projector .  Off: Choose “Off” to be able to switch on the projector without password verication. Security T imer Use this function to set the how long (Month/Day/Hour) the projector can be used. Once this time has elap ...

  • Optoma EH7700 - page 41

    41 English User Controls  If the incorrect password is entered 3 times, the projector will automatically shut down.  If you have forgotten your password, please contact your local ofce for support.  Always keep the password in your les. If the password is forgotten or lost, the projector will have to be sent to your local autho - ...

  • Optoma EH7700 - page 42

    42 English User Controls SETUP | Signal (RGB) Frequency Change the display data frequency to match the frequency of your computer ’s graphic card. Use this function only if the image ap - pears to icker vertically . Phase Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or ickers, use t ...

  • Optoma EH7700 - page 43

    43 English User Controls SETUP | Signal (V ideo) White Level Allow user adjust White Level when inputting S-Video or V ideo/ CVBS signals. Black Level Allow user adjust Black Level when inputting S-Video or V ideo/ CVBS signals. Saturation Adjust a video image from black and white to fully saturated color .  Press the to decrease the amount of s ...

  • Optoma EH7700 - page 44

    44 English User Controls SETUP | Advanced Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on.  Optoma: The default startup screen.  Neutral: Logo is not displayed on startup screen.  User: Use stored picture from “Logo Capture” function. Logo Cap ...

  • Optoma EH7700 - page 45

    45 English User Controls SETUP | Network | LAN Settings Network State Display the network connection status. DHCP Use this function to select your desired startup screen. If you change the setting from one to another , when you exit the OSD menu, the new setting will take effect on next open.  On: Assign an IP address to the projector from an ex ...

  • Optoma EH7700 - page 46

    46 English User Controls 1. Turn on DHCP to allow the DHCP server to automatically assign an IP , or manually enter the required network information. 2. Then choose apply and press “ ” button to complete the conguration process. 3. Open your web browser and type in the projector ’s IP address from the OSD LAN screen. The following web page ...

  • Optoma EH7700 - page 47

    47 English User Controls When making a direct connection from your computer to the projector Ste p 1: Find an IP Address (192.168.0.100) from LAN function of projector . Step 2: Select apply and press “ Enter” button to submit function or press “ menu ” key to exit. Step 3: T o open Network Connections, click Start , click Control Panel , c ...

  • Optoma EH7700 - page 48

    48 English User Controls SETUP | Network | Control Settings Creston T urn on or off Crestron. (Note: Port 41794) Extron T urn on or off Extron. (Note: Port 2023) AMX Device Discovery T urn on or off AMX Device Discovery . (Note: Port 1023) T elnet T urn on or off T elnet. (Note: Port 23) PJ Link T urn on or off PJ Link. (Note: Port 4352)  Con ...

  • Optoma EH7700 - page 49

    49 English User Controls Source Lock  On: The projector will only search current input connection.  Off: The projector will search for other signals if the current input signal is lost. High Altitude When “On” is selected, the fans will spin faster . This feature is use - ful in high altitude areas where the air is thin. Information Hide ...

  • Optoma EH7700 - page 50

    50 English User Controls 12V T rigger 12V trigger provides a standard trigger for motorized screens. VGA Out Use this feature to display the screen from input source.  Auto: In standby mode (active), the default VGA out loops through from VGA1; unless VGA2 locked in last operation, VGA2 will loop through to VGA out.  VGA 1: Choose the VGA 1-I ...

  • Optoma EH7700 - page 51

    51 English User Controls Function 1 Choose your desired function from “Brightness” , “PIP”, “Color Matching”, “Zoom”, “Projection”, “V ARC+” or “H ARC+”. Function 2 Choose your desired function from “Contrast” , “PIP Source”, “PIP Swap”, “Color”, “V ARC-”, “H ARC-” or “Lamp Settings”. IR Funct ...

  • Optoma EH7700 - page 52

    52 English User Controls OPTION | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will au - tomatically power on when AC power is supplied, without pressing the “ ” key on the projector control panel or on the remote control. Signal Power On The projector will power on when it receives a signal. This elimi ...

  • Optoma EH7700 - page 53

    53 English User Controls OPTION | Lamp Settings Lamp Mode Select single/dual lamp mode of the projector .  Dual: Default value for this function.  Relay: When the difference in lamp life between the two lamps reaches 48 hours, the system will automatically switch to the lamp with the lower usage .  Lamp 1: One lamp illuminates. (Lamp1 is a ...

  • Optoma EH7700 - page 54

    54 English User Controls Brightness Mode  BRIGHT : Choose “BRIGHT” to increase the brightness.  STD: Choose “STD” to dim the projector lamp which will lower power consumption and extend the lamp life.  Power: Select the lamp power . When you choose this function, you can select the lamp power type. Bright STD Power Lamp Power 350W ...

  • Optoma EH7700 - page 55

    55 English Appendices No image appears on-screen  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure all the pins of connectors are not bent or broken.  Check if the projection lamp has been securely installed. Please refer to the “Replacing the lamp” ...

  • Optoma EH7700 - page 56

    56 English Appendices 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. V erify that the resolution setting of the monitor display is lower than or equal to WUXGA (1920 × 1200).  If you are using a Notebook: 1. First, follow the step ...

  • Optoma EH7700 - page 57

    57 English Appendices Image is out of focus  Make sure the projector cap is removed.  Adjust the Focus function on the projector lens.  Make sure the projection screen is between the required distance. See pages 18-19. The image is stretched when displaying 16:9 DVD title  When you play anamorphic DVD or 16:9 DVD, the projector will sho ...

  • Optoma EH7700 - page 58

    58 English Appendices The projector stops responding to all controls  If p ossible, turn off the projector , then unplug the power cord and wait at least 60 seconds before reconnecting power .  Check that “Keypad Lock” is not activated by trying to control the projector with the remote control. Lamp burns out or makes a popping sound  ...

  • Optoma EH7700 - page 59

    59 English Appendices On Screen Messages  T emperature warning:  Fan failed:  Lamp warning:  Out of display range: If the remote control does not work  Check the operating angle of the remote control is within ±15° both horizontally and vertically of one of the IR receivers on the projector .  Make sure there are not any obstruc ...

  • Optoma EH7700 - page 60

    60 English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at l ea ...

  • Optoma EH7700 - page 61

    61 English Appendices  The screws on the lamp cover and the lamp cannot be removed.  The projector cannot be turned on if the lamp cover has not been placed back on the projector .  Do not touch the glass area of the lamp. Hand oil can cause the lamp to shatter . Use a dry cloth to clean the lamp module if it was accidentally touc ...

  • Optoma EH7700 - page 62

    62 English Appendices  For widescreen resolution (WXGA), the compatibility support is dependent on Notebook/PC models.  Please note that using resolu- tions other than native 1920 x 1200 (WUXGA model) may result in some loss of image clarity .  (#1) Windows 8 Standard timing.  (#2) Only support RB (reduced blanking).  ...

  • Optoma EH7700 - page 63

    63 English Appendices Video Compatibility NTSC M (3.58MHz), 4.43 MHz P AL B, D, G, H, I, M, N SECAM B, D, G, K, K1, L SDTV 480i/p@60Hz, 576i/p@50Hz HDTV 720p@50Hz/60Hz, 1080i@50Hz/60Hz, 1080p@24Hz/50Hz/60Hz  Mode Resolution V -Sync (Hz) Analog Digital Mac (Analog) Mac (Digital) HDTV(1080i) 1920 × 1080 - 50 - - HDTV(1080i) 1920 × 1080 - 60 - - ...

  • Optoma EH7700 - page 64

    64 English Appendices RS232 Pin Assignments RS232 Commands and Protocol Function List  RS232 shell is grounded. Pin no. Spec. 1 N/A 2 RXD 3 TXD 4 N/A 5 GND 6 N/A 7 N/A 8 N/A 9 N/A 1 2 3 4 5 6 7 8 9 ...

  • Optoma EH7700 - page 65

    65 English Appendices RS232 Protocol Function List Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F 1. There is a <CR> after all ASCII commands. 2. 0D is the HEX code for <CR> in ASCII code. XX=00-99, projector's ID, XX=00 is fo ...

  • Optoma EH7700 - page 66

    66 English Appendices ----------------------------- ---------------------------------------- ----------------------------------------- ------------------------------------------------------ ---------------------------------------- --------------- ~XX344 n 7E 30 30 33 34 34 2 0 a 0D Yellow Gain n = -127 ~ 127 ~XX345n 7E 30 30 3 3 34 35 20 a 0D R n = ...

  • Optoma EH7700 - page 67

    67 English Appendices ----------------------------- ---------------------------------------- ----------------------------------------- ------------------------------------------------------ ---------------------------------------- --------------- ~XX77 n 7E 30 30 37 37 20 aabbc c 0D Secu rity Security Timer Month/Day/Hour n = mm/dd/hh mm = 00 (aa=3 ...

  • Optoma EH7700 - page 68

    68 English Appendices ----------------------------- ---------------------------------------- ----------------------------------------- ------------------------------------------------------ ---------------------------------------- --------------- SEND from projector automatically ----------------------------- --------------------------------------- ...

  • Optoma EH7700 - page 69

    69 English Appendices T elnet Commands Port: support 3 ports of 23/1023/2023 • Multi-connections: Projector could receive commands from • different ports at the same time Command Format: Follow RS232 command format (sup - • port both of ASCII and HEX) Command Response: Follow RS232 return message. • Lead Code Projector ID Command ID space v ...

  • Optoma EH7700 - page 70

    70 English Appendices  This AMX function is only to support AMX Device Discovery .  The broadcast information only send out through valid interface.  Both LAN and Wireless LAN interfaces could be supported at the same time.  If “Beacon V alidator” was used. Please take care below information PJLink™ supported commands ...

  • Optoma EH7700 - page 71

    71 English Appendices  This projector is fully compliant to the specications of JBMIA PJLink™ Class 1. It supports all the commands dened by PJLink™ Class 1, and the compliance has been veried with the PJLink™ stan - dard specications V ersion 1.0. Command Description Remark (Parameter) ERST? Inquiry about the error state 6t ...

  • Optoma EH7700 - page 72

    72 English Appendices T rademarks DLP is trademarks of T exas Instruments. • IBM is a trademark or registered trademark of International • Business Machines Corporation. Macintosh, Mac OS X, iMac, and PowerBook are trade - • marks of Apple Inc., registered in the U.S. and other countries. Microsoft, Windows, Windows Vista, Internet Explorer a ...

  • Optoma EH7700 - page 73

    73 English Appendices About AMX Device Discovery facilitate conguration of the • control system of AMX and its target devices. T o use this technology , it is necessary to set CONTROL SYSTEM in the NETWORK menu. (See pages 48.) For details, see the website of AMX. URL http://www .amx.com/ About PJLink™ • T o use PJLink™ Function, the PJL ...

  • Optoma EH7700 - page 74

    74 English Appendices Use 1 controller to control/monitor 1 projector . ` For how to control/monitor using PJLink™, see the operation ` manual of the PJLink™ application you use. When you monitor the projector ’s operating status using this ` function by issuing inquiry commands successively , issue an inquiry command after receiving the ` re ...

  • Optoma EH7700 - page 75

    75 English Appendices  Please note that damage resulting from incorrect installation will void the warranty . Ceiling Mount Installation 1. T o prevent damage to your projector , please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the ...

  • Optoma EH7700 - page 76

    76 English Appendices Ceiling Mount Safeguards 1. Stocktaking of projector accessories  M8 eye bolt screw*2  Spring washer*2  Flat washer*2 2. Bring your own installer  Hook : It is recommended to prepare 4 stainless steel hooks with a diameter of 10 mm or larger .  Steel wire: It is recommended to prepare a steel wire with a length ...

  • Optoma EH7700 - page 77

    77 English Appendices 3. Installation procedures  Lock the M8 eye bolt screw , spring washer , flat washer to the projector in order of the shown.  Pass through the rope at each end of 2 hooks.  Buckle the 2 hooks on the one end to the eye bolt screw and the 2 hooks on the other end to the stable bracket to finish the installation. ...

  • Optoma EH7700 - page 78

    78 English Appendices Optoma Global Ofces For service or support please contact your local ofce. USA 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www .optomausa.com services@optoma.com Canada 2420 Meadowpine Blvd., Suite #105 888-289-6786 Mississauga, ON, L5N 6S2, Canada 510-897-8601 www .optoma.ca services@optoma.com ...

  • Optoma EH7700 - page 79

    79 English Appendices Latin America 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www .optoma.com.br www .optoma.com.mx Korea WOOMI TECH.CO.,L TD. 4F ,Minu Bldg.33-14, Kangnam-Ku, +82+2+34430004 seoul,135-815, KOREA +82+2+34430005 Japan 東京都足立区綾瀬 3-25-18 株式会社オーエスエム info@osscreen.com サポ? ...

  • Optoma EH7700 - page 80

    80 English Appendices Regulation & Safety Notices This appendix lists the general notices of your projector . FCC notice This device has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a r ...

  • Optoma EH7700 - page 81

    81 English Appendices Disposal instructions Do not throw this electronic device into the trash when discarding. T o minimize pollution and ensure utmost protection of the global environment, please recycle it. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This devic ...

Fabbricante Optoma Categoria Video projector

I documenti che otteniamo dal fabbricante del dispositivoOptoma EH7700 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Optoma
- manuali per l’uso EH7700
- schede prodotto Optoma
- opuscoli
- o etichette energetiche Optoma EH7700
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Optoma EH7700.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Optoma EH7700, manuali di manutenzione, brevi manuali o manuali utente Optoma EH7700. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Optoma EH7700.

Manuali per l’uso simili

Manuale completo del dispositivo Optoma EH7700, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Optoma EH7700 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Optoma EH7700.

Il manuale per l’uso completo Optoma, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Optoma EH7700 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Optoma EH7700, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Optoma EH7700 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Optoma EH7700 - che ci dovrebbe aiutare nei primi passi durante l'uso Optoma EH7700
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Optoma EH7700
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Optoma EH7700 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Optoma EH7700?

Utilizza il modulo sottostante

Se non hai risolto il problema con Optoma EH7700 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Optoma EH7700 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)