Manuale per l’uso Q-Logic APS-610

10 pagine 0.3 mb
Scarica

Vai alla pagina of 10

Summary
  • Q-Logic APS-610 - page 1

    Model APS-610 Installation Manual SELECT ABLE FEA TURES Note: The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual. Note: When both Passive Arming and V oltage Sensing ...

  • Q-Logic APS-610 - page 2

    Page 2 Fourth Press and release the valet switch 3 chirps = headlight output when arming and disarming Press transmitter Lock button to change 4 chirps = headlight output off Press transmitter Lock button to change 1 chirp = headlight output when arming Press transmitter Lock button to change 2 chirps = headlight output when disarming or Fifth Pres ...

  • Q-Logic APS-610 - page 3

    Page 3 If during the program sequence receiver channel 1 is programmed, and received channel 2 is skipped over , as indicated in the transmitted program guide, then the unit will operate as a single button lock/unlock unit from that transmitter . It is possible to have one transmitter programmed for single button lock/unlock, and one transmitter pr ...

  • Q-Logic APS-610 - page 4

    Page 4 Whichever mounting method is selected, make certain that the sensitivity adjustment is accessible for use later in the installation. WIRING THE SYSTEM Large 10 Pin Edge Connector: Red/White (5Amp) & Red (15Amp) Fused Wires: +12 VDC Constant Battery Source This wire controls the sensitivity of the voltage sensing circuit, which detects th ...

  • Q-Logic APS-610 - page 5

    Page 5 Orange Wire: 300 mA Ground Output When Armed - N. C. Starter Disable This wire is provided to control the starter cut relay . Connect the orange wire to terminal 86 of the relay . Connect relay terminal 85 to an ignition wire in the vehicle that is live when the key is in the on and crank positions, and off when the key is in the off positio ...

  • Q-Logic APS-610 - page 6

    Page 6 Note: This is a normally opened starter cut arrangement, and when power is removed from the security system, the starter disable feature will remain operational, and the vehicle will not start. Audiovox does not recommend using the Orange w/ White trace wire to interrupt anything but the starting circuit of the vehicle. Dark Green Wire: ( - ...

  • Q-Logic APS-610 - page 7

    Page 7 2 Pin White Connector: Dash Mounted L.E.D. Route the red and blue wires in the 2 pin white connector from the L.E.D. to the control module, and plug it into the mating white connector on the side of the module. 4 Pin White Connector: Shock Sensor Route the red, black, green and blue wires in the 4 pin white connector from the shock sensor to ...

  • Q-Logic APS-610 - page 8

    Page 8 Next, locate the drivers door unlock motor wire and cut it at a convenient location to allow wiring of the White and Dark Blue wires. Dark Blue will connect to the vehicle side of the cut wire and White will connect to the "Unlock Drivers Door Motor" side of the cut wire. Most vehicles door lock/unlock motor legs rest at ground, an ...

  • Q-Logic APS-610 - page 9

    Page 9 COMPLETING THE INST ALLA TION Antenna Wire: Be sure to extend the thin black antenna wire to it’s full length, and cable tie into place where it cannot be damaged. Avoid wrapping this wire around major , high current wire looms. Adjusting the Shock Sensor: If used, the sensitivity of the pre-detect circuit is automatically set 30% less sen ...

  • Q-Logic APS-610 - page 10

    © 2000 Audiovox Corporation, 150 Marcus Blvd., Hauppauge, N.Y. 11788 128-5758A ...

Fabbricante Q-Logic Categoria Automobile Accessories

I documenti che otteniamo dal fabbricante del dispositivoQ-Logic APS-610 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Q-Logic
- manuali per l’uso APS-610
- schede prodotto Q-Logic
- opuscoli
- o etichette energetiche Q-Logic APS-610
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Q-Logic APS-610.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Q-Logic APS-610, manuali di manutenzione, brevi manuali o manuali utente Q-Logic APS-610. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Q-Logic APS-610.

Manuali per l’uso simili

Manuale completo del dispositivo Q-Logic APS-610, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Q-Logic APS-610 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Q-Logic APS-610.

Il manuale per l’uso completo Q-Logic, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Q-Logic APS-610 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Q-Logic APS-610, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Q-Logic APS-610 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Q-Logic APS-610 - che ci dovrebbe aiutare nei primi passi durante l'uso Q-Logic APS-610
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Q-Logic APS-610
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Q-Logic APS-610 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Q-Logic APS-610?

Utilizza il modulo sottostante

Se non hai risolto il problema con Q-Logic APS-610 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Q-Logic APS-610 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (1)

monluja

Ich suche eine Benutzeranleitung für Dymo 3500 in deutsch.