-
Panasonic KX-UT113 - page 1
KX-UT1 13/KX-UT123 Model No. KX-UT133/KX-UT136 <KX-UT136> Document V ersion: 201 1-06 SIP Phone Thank you for purchasing this Panasonic product. Please read this manual carefully before using this product and save this manual for future use. KX-UT1 13/KX-UT123/KX-UT133/KX-UT136: Software File V ersion 01.000 or later In this manual, the suffi ...
-
Panasonic KX-UT113 - page 2
Introduction Feature Highlights Easy Operation You can easily access features using the Navigator key, fixed buttons, and soft buttons. Also, the Message/Ringer lamp will inform you when you have an incoming call or a message waiting. High-quality Voice Communication This unit implements the standard SIP protocol, enabling high-quality voice commun ...
-
Panasonic KX-UT113 - page 3
Other Information Outline This manual describes information about the installation and operation of the unit. Related Documentation Getting Started Briefly describes basic information about the installation of the unit. Administrator Guide Describes information about the programming and maintenance of the unit. Manuals and supporting information ar ...
-
Panasonic KX-UT113 - page 4
When you ship the product (For users in the United States only) Carefully pack and send it prepaid, adequately insured and preferably in the original carton. Attach a postage-paid letter, detailing the symptom to the outside of the carton. DO NOT send the product to the Executive or Regional Sales offices. They are NOT equipped to make repairs. Pro ...
-
Panasonic KX-UT113 - page 5
For Your Safety To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbols The following symbols are used to classify and describe the level of hazard and injury caused when the denotation is disregarded and improper use ...
-
Panasonic KX-UT113 - page 6
Disconnect this unit from power outlet/the Ethernet cables if it emits smoke, an abnormal smell, or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center. Installation Do not make power connections that exceed the ratings for the AC outlet or power equipment. ...
-
Panasonic KX-UT113 - page 7
• For information regarding network setup of the SIP Phone such as IP addresses, please see "Network Settings (Page 42)". • If an error message is shown on your display, consult your dealer or the network administrator. • Use only the correct Panasonic handset. Data Security We recommend observing the security precautions described ...
-
Panasonic KX-UT113 - page 8
external device, ensure that data cannot be retrieved from it by formatting the hard disk and/or rendering it physically unusable. Preventing Data Disclosure Over the Network • To ensure the security of private conversations, only connect the unit to a secure network. • To prevent unauthorized access, only connect the unit to a network that is ...
-
Panasonic KX-UT113 - page 9
Additional Information Important Safety Instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use the unit near water, for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a ...
-
Panasonic KX-UT113 - page 10
For users in Canada only • This Class B digital apparatus complies with Canadian ICES-003. • This product meets the applicable Industry Canada technical specifications. Compliance with TIA-1083 standard T Compatible with Hearing Aid T-Coil TIA-1083 Telephone handsets identified with this logo have reduced noise and interference when used with T ...
-
Panasonic KX-UT113 - page 11
Table of Contents Before Operating the Telephone .. ........................................................ 13 Accessory Information .. ................................................................................................. 13 Location of Controls .. ........................................................................................ ...
-
Panasonic KX-UT113 - page 12
Web User Interface Programming .. ............................................................................... 55 Installation and Setup .. .......................................................................... 56 Attaching/Removing the Stand .. .................................................................................... 56 Connectio ...
-
Panasonic KX-UT113 - page 13
Before Operating the Telephone Accessory Information Included Accessories *1 Handset (1) Handset Cord (1) [Part No.] Black model: PNLXQ1001Z White model: PNLXQ1002Z [Part No.] Black model: PNJA1066Z White model: PNJA1067Z Stand (1) For KX-UT113/KX-UT123: [Part No.] Black model: PNYLUT113BM White model: PNYLUT113M For KX-UT133/KX-UT136: [Part No.] B ...
-
Panasonic KX-UT113 - page 14
Location of Controls Front View For KX-UT136: F A E B CD KL M N O P QR H GI J For KX-UT133: F A E B CD KL M N O P QR H GI J 14 Operating Instructions Document Version 2011-06 Before Operating the Telephone ...
-
Panasonic KX-UT113 - page 15
For KX-UT113/KX-UT123: F A E B CD KL M N O P R HI J G LCD (Liquid Crystal Display) KX-UT136 is equipped with a 6-Line LCD. KX-UT113/KX-UT123/KX-UT133 is equipped with a 3-Line LCD. KX-UT123/KX-UT133/KX-UT136 is equipped with an LCD backlight. Soft Buttons (S1 to S4) S1 to S4 (located below the display) are used to select the item displayed on the b ...
-
Panasonic KX-UT113 - page 16
When a call is on hold, the Hold lamp (KX-UT113/KX-UT123 only) flashes red. MUTE/AUTO ANSWER Used to receive an incoming call in hands-free mode or mute the microphone/handset during a conversation. TRANSFER Used to transfer a call to another party. SP-PHONE (Speakerphone)/HEADSET Used for performing hands-free operations. When the SP-PHONE is used ...
-
Panasonic KX-UT113 - page 17
Left Side View For KX-UT133/KX-UT136: B A For KX-UT113/KX-UT123: B EHS Jack (KX-UT133/KX-UT136 only) Headset Jack Document Version 2011-06 Operating Instructions 17 Before Operating the Telephone ...
-
Panasonic KX-UT113 - page 18
Bottom View For KX-UT133/KX-UT136: CD B A For KX-UT123: A CD B For KX-UT113: A D B DC Jack 18 Operating Instructions Document Version 2011-06 Before Operating the Telephone ...
-
Panasonic KX-UT113 - page 19
LAN Port PC Port (KX-UT123/KX-UT133/KX-UT136 only) Handset Jack Document Version 2011-06 Operating Instructions 19 Before Operating the Telephone ...
-
Panasonic KX-UT113 - page 20
Screens This section explains the buttons and icons that appear on the display. For KX-UT136: Setting Call Log For KX-UT113/KX-UT123/KX-UT133: Setting Call Log Status Icons Indicates the status of various features (Page 20). Soft Button Icons Indicate the functions that will be accessed when the corresponding buttons are pressed. The icons displaye ...
-
Panasonic KX-UT113 - page 21
Soft Buttons and Soft Button Icons By pressing a soft button ( S1 to S4 ), you can access the function displayed directly above it. Setting Call Log S1 S2 S3 S4 In this manual, soft buttons are referred to by their corresponding icons. In the example here, "Press ", "Press ", or "Press " would indicate pressing S1 , S2 ...
-
Panasonic KX-UT113 - page 22
Icon Description Assign the preferred number to dial among multiple registered phone numbers in the same phonebook entry, when making a call using the phonebook (Page 35). Display the telephone number when searching an entry in the phonebook (Page 25). Update the firmware (Page 45). 22 Operating Instructions Document Version 2011-06 Before Operatin ...
-
Panasonic KX-UT113 - page 23
Basic Operations This section explains the basics of using the unit. Confirming Your Extension Number In stand-by mode (i.e., when you do not have any active calls), you can view the extension number and name registered to the unit. Going off- and on-hook There are several ways to go off-hook and on-hook: • Using the handset • Using the [SP-PHO ...
-
Panasonic KX-UT113 - page 24
You can also adjust the ringer volume in the settings. For details, see "Ringer (Page 39)". Note • When the ringer volume is turned all the way down, " Off " is displayed. Also, is displayed when the unit is in stand-by mode. Adjusting the handset/headset/ speaker volume Press [ ] or [ ] during a conversation when using the ha ...
-
Panasonic KX-UT113 - page 25
Feature Operations Making Calls This section explains the basic methods for making a call. Making a Call 1. In stand-by mode, go off-hook. 2. Enter the number you want to call. 3. Press [ENTER] , or wait a few seconds for the number to be dialed. 4. To end the call, go on-hook. Pre-dialing In stand- by mode, you can start dialing (max. 32 digits) w ...
-
Panasonic KX-UT113 - page 26
• For KX-UT133/KX-UT136, you can press instead of going off-hook. If more than one line is available at your unit, select the line to use, and then press [ENTER] . • You can add a call log entry to the phonebook. See "Adding a Phonebook Entry from the Incoming Call Log (Page 35)". Editing a phone number before dialing from the incomin ...
-
Panasonic KX-UT113 - page 27
Receiving Calls This section explains the basic methods for receiving a call. Receiving a Call 1. Go off-hook. 2. To end the call, go on-hook. Auto answer You can have the unit automatically answer an incoming call. The call is connected after a programmed number of rings. • To enable Auto Answer: In stand-by mode, press [AUTO ANSWER] until " ...
-
Panasonic KX-UT113 - page 28
Deleting a stored phone number 1. In stand-by mode, press . 2. Press [ ] or [ ] to select " Call Block ", and then press [ENTER] . 3. Press [ ] or [ ] to select the phone number you want to delete, and then press . 4. Press [ ] or [ ] to select " Yes ", and then press [ENTER] . Note • If you do not press any buttons for 1 minu ...
-
Panasonic KX-UT113 - page 29
Receiving a Second Call (Answering Call Waiting) During a conversation, if a second call arrives, you will hear a call waiting tone. You can answer the second call by disconnecting or holding the current call. To disconnect the current call and then talk to the new party 1. Go on-hook while hearing the call waiting tone. 2. Go off-hook. To hold the ...
-
Panasonic KX-UT113 - page 30
Transferring a Call (Call Transfer) You can transfer a call to another destination (extension or outside party). To transfer 1. Press [TRANSFER] during a conversation. 2. Call the party you want to transfer the call to. 3. Wait until the other party answers to announce the transfer. (This step can be omitted.) 4. Press OK . Note • If On-hook Tran ...
-
Panasonic KX-UT113 - page 31
Conference Call (Local Three-way Conference) During a conversation, you can add an additional party to your call and establish a conference call. Notice • Your phone system may support advanced conference features, such as conference calls with four or more parties. In this case, the procedures for handling a conference call may be different from ...
-
Panasonic KX-UT113 - page 32
Checking Messages Checking New Messages When you receive a voice message, " Message " appears on the display, and the Message/Ringer lamp turns red. You can check your new messages by accessing your mailbox. 1. Press [MESSAGE] . 2. If the unit has multiple lines, press [ ] or [ ] to select the line on which is displayed, and then go off-h ...
-
Panasonic KX-UT113 - page 33
Call Forwarding/Do Not Disturb You can have incoming calls automatically forwarded to another destination. You can also have incoming calls rejected (Do Not Disturb). Note • When Call Forwarding or Do Not Disturb is enabled, FWD/DND appears on the display in stand-by mode. To access the FWD/DND settings 1. In stand-by mode, press or [FORWARD/DO N ...
-
Panasonic KX-UT113 - page 34
Flexible Buttons (KX-UT133/KX-UT136 only) The flexible buttons on the unit can be customized to be used to make or receive calls or as feature buttons. These buttons are configured by your administrator or dealer. The following types of flexible buttons are available: DN (Directory Number) Seizes the line assigned to the DN button. When a call arri ...
-
Panasonic KX-UT113 - page 35
Customizing the Telephone Phonebook List Adding a New Phonebook Entry You can add a maximum of 500 (for KX-UT123/ KX-UT133/KX-UT136) or 100 (for KX-UT113) phonebook entries to the unit. To make a call from the phonebook, see "Making a Call from the Phonebook List (Page 25)". 1. Press . 2. Press . 3. Enter a name (max. 24 characters), and ...
-
Panasonic KX-UT113 - page 36
Note • If you store multiple phone numbers in the entry, you can assign the preferred number to use when you call this party. In step 4 , select the desired number, and then press . • If you do not press any buttons for 1 minute, the unit will return to stand-by mode. Searching for a Phonebook Entry You can search the phonebook for the desired ...
-
Panasonic KX-UT113 - page 37
User Settings You can configure various settings to customize the behavior of the unit. This section explains how to configure the settings using the unit. Accessing the Settings 1. In stand-by mode, press . 2. Press [ ] or [ ] to select the desired setting category, and then press [ENTER] . 3. Configure the settings as necessary. Document Version ...
-
Panasonic KX-UT113 - page 38
Available Settings Ringer Ringer Volume Page 39 Ringtone Page 39 ECO Mode Page 39 LCD Contrast Page 39 Back Light Page 40 Display Lock Page 40 FWD/DND Setting Do Not Disturb Page 40 FWD All Page 40 FWD Busy Page 40 FWD No Ans Page 41 Language Page 41 Date and Time Page 42 Information Display Page 42 Network Settings Network DNS Page 43 IP address P ...
-
Panasonic KX-UT113 - page 39
Settings Details Ringer Setting Description Value Range Default Ringer Volume Adjust the ringer volume. Level 0 to 6 Level 3 Ringtone (current setting confirmation) For KX-UT133/KX-UT136, you can listen to the ring tones. Ring tones can be assigned to DN buttons (flexible buttons, Page 34) through Web user interface programming (Page 55), but they ...
-
Panasonic KX-UT113 - page 40
Back Light (KX-UT123/KX-UT133/KX-UT136 only) Setting Description Value Range Default Back Light Change the settings for the backlight. Always On Automatic Always Off Automatic If you select " Always On " or " Automatic ", press [ ] or [ ] to adjust the brightness. Level 1 to 3 Level 3 Note • When " Automatic " is sel ...
-
Panasonic KX-UT113 - page 41
Setting Description Value Range Default Phone number Specify the number to forward calls to when " FWD Busy " is enabled. 1–32 digits — FWD No Ans Forward incoming calls to a specified destination if you do not answer after a specified number of rings. — — On/Off Enable or disable the " FWD No Ans " setting. On, Off Off ...
-
Panasonic KX-UT113 - page 42
Date and Time Setting Description Value Range Default Date and Time Set the date and time. Date *1 : dd/mm/yy or mm/dd/yy Time *2 : 00:00–23:59 or 12:00–11:59 AM/ PM — *1 Pressing [#] switches the date format. *2 If the time format is not assigned in the configuration data, you can change the time format (12-hour or 24-hour) by pressing [*] . ...
-
Panasonic KX-UT113 - page 43
Setting Description Value Range Default Network Configure the basic network settings. If you select DHCP, you must then select whether the DNS setting is configured automatically or manually. If you select STATIC, you must manually specify the IP address, subnet mask, default gateway, and DNS servers. DHCP, STATIC — DNS (DHCP only) Select whether ...
-
Panasonic KX-UT113 - page 44
Setting Description Value Range Default VLAN ID Specify the VLAN ID. 1–4094 1 Priority Specify the priority of packets sent from this unit. 0–7 0 Speed/Duplex Select the connection mode (combination of link speed and duplex mode) of the LAN port and PC port. — — LAN port Select the connection mode of the LAN port. Auto, 10M-Full, 10M-Half, ...
-
Panasonic KX-UT113 - page 45
Setting Description Value Range Default Factory Setting Reset all settings to their factory-shipment state. — — IP Reset Reset the following settings to their default values: • FWD/DND Setting (Page 40) • Language (Page 41) • Date and Time (Page 42) • Network Settings (Page 42) — — Restart Setting Description Value Range Default Res ...
-
Panasonic KX-UT113 - page 46
Call Block Setting Description Value Range Default Call Block Register telephone numbers so that calls received from those numbers are blocked. You can also delete registered numbers. To register 1. Press . 2. Enter the telephone number to block, and then press [ENTER] . To edit 1. Press [ ] or [ ] to select the blocked telephone number to edit. 2. ...
-
Panasonic KX-UT113 - page 47
Entering Characters The dial keys are used to enter characters and numbers. Each dial key has multiple characters assigned to it. (For example, A, B and C are assigned to the 1 key.) To enter a character, press the corresponding dial key until the character you want appears. To enter another character that is assigned to the same key, first press [ ...
-
Panasonic KX-UT113 - page 48
Note • If the maximum number of characters has been entered, entering another character will overwrite the character under the cursor. • If the entered texts spans two or more lines, you can also move the cursor using [ ] and [ ] . Character entry modes The six character entry modes let you enter a variety of characters. The following character ...
-
Panasonic KX-UT113 - page 49
Character Tables ABC (Latin) Button Characters Note • For each button, the upper row shows the characters entered in uppercase mode, and the lower row shows the characters entered in lowercase mode. Document Version 2011-06 Operating Instructions 49 Customizing the Telephone ...
-
Panasonic KX-UT113 - page 50
0–9 (Numeric) Button Characters 50 Operating Instructions Document Version 2011-06 Customizing the Telephone ...
-
Panasonic KX-UT113 - page 51
ΑΒΓ (Greek) Button Characters Note • For each button, the upper row shows the characters entered in uppercase mode, and the lower row shows the characters entered in lowercase mode. Document Version 2011-06 Operating Instructions 51 Customizing the Telephone ...
-
Panasonic KX-UT113 - page 52
AÄÅ (Latin Extended 1) Button Characters Note • For each button, the upper row shows the characters entered in uppercase mode, and the lower row shows the characters entered in lowercase mode. 52 Operating Instructions Document Version 2011-06 Customizing the Telephone ...
-
Panasonic KX-UT113 - page 53
SŚŠ (Latin Extended 2) Button Characters Note • For each button, the upper row shows the characters entered in uppercase mode, and the lower row shows the characters entered in lowercase mode. Document Version 2011-06 Operating Instructions 53 Customizing the Telephone ...
-
Panasonic KX-UT113 - page 54
АБВ (Cyrillic) Button Characters Note • For each button, the upper row shows the characters entered in uppercase mode, and the lower row shows the characters entered in lowercase mode. 54 Operating Instructions Document Version 2011-06 Customizing the Telephone ...
-
Panasonic KX-UT113 - page 55
Web User Interface Programming The unit provides a Web-based interface for configuring various settings and features, including some that are not programmable directly from the unit. The following list contains some useful features that are programmable through the Web user interface. For details, consult your administrator or dealer. • Basic net ...
-
Panasonic KX-UT113 - page 56
Installation and Setup Notice • Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. Attaching/Removing the Stand Attaching the Stand For KX-UT133/KX-UT136: 1. Insert the catches ( 1 ) of the stand into hooks located in t ...
-
Panasonic KX-UT113 - page 57
2. Gently rotate the stand in the direction indicated until it is released. For KX-UT113/KX-UT123: 1. Remove the stand in the direction indicated while pushing the catches of the stand with both hands as shown. Adjusting from High to Low Position (KX-UT133/KX-UT136 only) Document Version 2011-06 Operating Instructions 57 Installation and Setup ...
-
Panasonic KX-UT113 - page 58
1. Tilt the stand in the direction indicated while pushing the PUSH mark with both hands as shown until it locks into the low position ( 2 ). B Adjusting from Low to High Position (KX-UT133/KX-UT136 only) 1. Tilt the stand in the direction indicated while pushing the PUSH mark with both hands as shown until it locks into the high position ( 1 ). A ...
-
Panasonic KX-UT113 - page 59
Connections This section explains the ports and connectors on the unit. Connections for AC Adaptor/LAN/PC For KX-UT133/KX-UT136: To a Switching Hub To a PC Optional AC adaptor AC adaptor Clamp Handset To a handset jack (handset) Ethernet cables A B A B EHS jack Headset jack Headset For KX-UT113/KX-UT123: To a Switching Hub To a PC (KX-UT123 only) T ...
-
Panasonic KX-UT113 - page 60
• The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the unit and is easily accessible. When connecting a headset • Ensure that the headset cord has slack and is not pulled tight during use to prevent damage to the connectors. Notice • It is recommended that you use one of the following headsets: ...
-
Panasonic KX-UT113 - page 61
Connections for Handset For KX-UT133/KX-UT136: For KX-UT113/KX-UT123: Document Version 2011-06 Operating Instructions 61 Installation and Setup ...
-
Panasonic KX-UT113 - page 62
Wall Mounting Before Mounting on a Wall To mount the unit, it is necessary to remove the stand. For details, see "Removing the Stand (Page 56)". Mounting the Unit WARNING • Do not mount the unit in a manner other than that described in this section. • Make sure that the wall that the unit will be attached to is strong enough to suppor ...
-
Panasonic KX-UT113 - page 63
For KX-UT113/KX-UT123: 2. Fasten the wall mounting adaptor to the base with 1 screw. (Recommended torque: 0.4 N·m [4.08 kgf·cm/ 3.54 lbf·in] to 0.6 N·m [6.12 kgf·cm/5.31 lbf·in]) For KX-UT133/KX-UT136: Document Version 2011-06 Operating Instructions 63 Installation and Setup ...
-
Panasonic KX-UT113 - page 64
For KX-UT113/KX-UT123: 3. Connect the cables to the unit, and run the cables through the wall mounting adaptor, as shown in the illustration below. For details about connecting the cables, see "Connections (Page 59)". Note • The cables can also be run from the bottom of the unit. For KX-UT133/KX-UT136: 40 mm (1 37 / 64 in) or less Ether ...
-
Panasonic KX-UT113 - page 65
For KX-UT113/KX-UT123: 40 mm (1 37 / 64 in) or less Ethernet cables AC adaptor 4. Drive 2 screws into the wall as shown in the illustration below, and mount the unit on the wall. For KX-UT133/KX-UT136: 83 mm (3 1 / 4 in ) 100 mm (3 15 / 16 in ) Washer Drive the screw to this point. Document Version 2011-06 Operating Instructions 65 Installation and ...
-
Panasonic KX-UT113 - page 66
For KX-UT113/KX-UT123: Washer Drive the screw to this point. 83 mm (3 1 / 4 in ) 100 mm (3 15 / 16 in ) Note • You can find a wall mounting template at the end of this manual. • For information about locking the handset, see "Hooking the Handset (Page 67)". 66 Operating Instructions Document Version 2011-06 Installation and Setup ...
-
Panasonic KX-UT113 - page 67
Hooking the Handset You can hook the handset with following operations. To Hook the Handset During a Conversation 1. Hook the handset over the top edge of the unit. To Lock the Handset Hook when the Unit is Wall Mounted 1. Remove the handset hook from the slot. 2. Turn it up-side-down. 3. Slide the handset hook back into the slot until it locks. Do ...
-
Panasonic KX-UT113 - page 68
4. Handset is safely hooked when it is in the cradle. 68 Operating Instructions Document Version 2011-06 Installation and Setup ...
-
Panasonic KX-UT113 - page 69
Using a Headset For KX-UT133/KX-UT136, if a headset is connected, you must enable Headset mode using the Headset button (flexible button). To enable Headset mode, press the Headset button (flexible button). When in Headset mode, [SP-PHONE] is used for going on- and off-hook. Making a Call Using a Headset 1. Press [SP-PHONE] . 2. Enter the number yo ...
-
Panasonic KX-UT113 - page 70
Maintaining the Unit Initializing the Unit Doing an initialization resets some or all settings to their default values. There are two types of initialization: • Factory Setting Resets all settings in the unit to their default values. This type of initialization also deletes all other data on the unit, such as the call logs and the phonebook. Do a ...
-
Panasonic KX-UT113 - page 71
Appendix Specifications Item Specifications KX-UT113 KX-UT123 KX-UT133 KX-UT136 Display 3 line (No backlight) 3 line with backlight 3 line with backlight 6 line with backlight Flexible Buttons — — 24 24 VoIP Connection Method SIP VoIP Audio Codec G.722, G.711, G.729A, G.726 Ethernet Interface 10Base-T/100Base-TX IP Address Mode Automatic (DHCP) ...
-
Panasonic KX-UT113 - page 72
Item Specifications KX-UT113 KX-UT123 KX-UT133 KX-UT136 Power Consumption PoE Stand-by: 1.8 W (ECO mode off), 1.3 W (ECO mode on) Talking: 2 W (ECO mode off), 1.5 W (ECO mode on) Maximum: 6 W AC Adaptor Stand-by: 1.6 W (ECO mode off), 1 W (ECO mode on) Talking: 2 W (ECO mode off), 1.5 W (ECO mode on) Maximum: 6 W Operating Environment 5 °C to 40 ? ...
-
Panasonic KX-UT113 - page 73
Troubleshooting Common Issues and Solutions General Use Issue Possible Cause & Solution Reference The display is blank. • The unit is not receiving power. → The unit is not designed to function when there is a power failure. Make sure that the device supplying PoE is receiving power and that the Ethernet cable is properly connected. If an A ...
-
Panasonic KX-UT113 - page 74
Making and Receiving Calls Issue Possible Cause & Solution Reference I cannot make calls. • Your phone system/service has disabled service for your unit. → On the Information Display screen (Page 42), if " Not registered " is displayed in " Status ", consult your administrator or dealer. — • The phone number was ente ...
-
Panasonic KX-UT113 - page 75
Issue Possible Cause & Solution Reference Sound cuts out; I can hear myself through the speaker. • You are too far away from the microphone. → Try speaking closer to the microphone. — • The environment is not suited to speakerphone calls. → Do not use the unit within 2 m of projectors, air conditioning devices, fans, or other audible ...
-
Panasonic KX-UT113 - page 76
Message Possible Causes & Solutions Reference Memory full • A new entry for the phonebook or call block list cannot be stored because the phonebook or call block list is full. → Erase unneeded entries. Page 36 No Entries • The phonebook or call block list contains no entries. → Store entries in the phonebook or call block list. Page 35 ...
-
Panasonic KX-UT113 - page 77
Open Source Software Parts of this product use Open Source Software. Relevant conditions apply to this software. Panasonic cannot accept inquiries regarding the content of the following copyright and license information. <<NetBSD kernel>> This product uses a part of NetBSD kernel. The use of a part of NetBSD kernel is based on the typic ...
-
Panasonic KX-UT113 - page 78
Copyright (c) 1982, 1986, 1993, 1995 The Regents of the University of California. All rights reserved. Copyright (c) 1982, 1988, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1983, 1990, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1983, 1993 The Regents of the Uni ...
-
Panasonic KX-UT113 - page 79
Copyright (c) 1999, 2000 Jason L. Wright (jason@thought.net) All rights reserved. Copyright (c) 1999, 2000 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1999, 2000, 2001 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1999, 2001 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 2000 The NetBSD Foundation ...
-
Panasonic KX-UT113 - page 80
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer . 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The names of ...
-
Panasonic KX-UT113 - page 81
Index A AC adaptor 13 Connection 59 Accessories 13 ACD flexible button 34 ACD Group 33 Auto answer 27 AUTO ANSWER/MUTE button 16 Automatic Call Distribution ® ACD 33 B Back Light (setting) 40 BLF flexible button 34 Busy Lamp Field ® BLF 34 C Call Block (setting) 46 Call Forwarding 33 Call Splitting 29 Call Transfer 30 Call Waiting 29 Calls From c ...
-
Panasonic KX-UT113 - page 82
Local Three-way Conference 31 Login (to a Group) 33 Logout (from a Group) 33 M Maintenance 70 Making calls 25 Calling 25 MESSAGE button 15 Message/Ringer Lamp 15 Messages, checking 32 MIC 16 Missed calls 32 MUTE/AUTO ANSWER button 16 N Navigator key 15 Network (setting) 43 Network Test (setting) 44 O Off-hook monitor 23 One-touch dialing 26 One-Tou ...
-
Panasonic KX-UT113 - page 83
83 mm (3 1 / 4 in) 100 mm (3 15 / 16 in) for base unit One screw here One screw at either point W ALL MOUNTING TEMPLA TE 1. Drive the screws into the wall as indicated. 2. Hook the unit onto the screw heads. Note: Make sure to set the print size to correspond with the size of this page. If the dimensions of the paper output still deviate slightly f ...
-
Panasonic KX-UT113 - page 84
Copyright: Panasonic System Networks Co., Ltd. 2011 This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd. PNQX3571ZA DD071 1MK0 (v0.007) One Panasonic Way, Secaucus ...
Hai una domanda su Panasonic KX-UT113?
Utilizza il modulo sottostante
Se non hai risolto il problema con Panasonic KX-UT113 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Panasonic KX-UT113 è probabile che voglia condividere il modo di risolverlo.