Italiano dropdown-ico

Manuale per l’uso Zoom 1204

38 pagine 0.25 mb
Scarica

Vai alla pagina of 38

Summary
  • Zoom 1204 - page 1

    POWER MIDI CONTROL 512 PROGRAMS VOCODER, ROTARY MIC IN INPUT OUTPUT EDIT PATTERN (Demo) 1 2 16 15 14 13 12 11 10 9 3 4 5 6 7 8 2 1 Hall Chourus Room Flanger Reverse SFX Power Pit/Echo Gate Flg/Echo Echo Cho/Echo Dly Tim/Rev Solo Pit/Rev Drums Flg/Rev Percus Cho/Rev Plate Pitch Vocal Tremolo Ambi Dly+Rev Orche Cho+Rev Studio Flg+Rev Session Pit+Rev ...

  • Zoom 1204 - page 2

    Major Features The 1204 is a multi-effect device with the following features: • 512 preset effect pr ograms (32 effects x 16 patterns) Memory capacity for storing up to 100 of your own effect settings, resulting in a total of 612 available effect sounds. • Easily changeable parameters let you create your own effect settings. • Manual mode all ...

  • Zoom 1204 - page 3

    CONTENTS Major Features ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 1 Organization of This Manual •••••••••••? ...

  • Zoom 1204 - page 4

    EFFECT TYPES, EFFECTP A TTERNS, EFFECT P ARAMETERS ••••••••••••••••••••••••••• 24 Category: REV (Reverb) •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••? ...

  • Zoom 1204 - page 5

    Safety Precautions In this manual, important information that is intended to prevent the danger of injury to persons and damage to equipment is marked with special symbols. The meaning of these symbols is explained below . Please read this information carefully and observe all precautions and instructions. ■ Other Symbols This symbol indicates a ...

  • Zoom 1204 - page 6

    ■ 1204 Usage Precautions ■ 5 ■ W arnings Do not try to open the case of the unit or attempt any alterations. ¥ Protect the unit from high temperatures. Do not store or use it in locations exposed to direct sunlight, close to heating appliances or anywhere where the ambient temperature can exceed 40 ûC. ¥ Protect the unit from high humidity ...

  • Zoom 1204 - page 7

    THE BASICS This chapter describes the controls and other parts of the 1204, as well as installation, setup, and connection to other equipment. ■ 6 ■ ...

  • Zoom 1204 - page 8

    ■ 7 ■ POWER MIDI CONTROL WITH VOCODER, ROTARY 612 PROGRAMS MIC IN INPUT OUTPUT EDIT PATTERN (Demo) 1 2 16 15 14 13 12 11 10 9 3 4 5 6 7 8 2 1 Hall Chorus Room Flanger Reverse SFX Power Pit/Echo Gate Flg/Echo Echo Cho/Echo Dly Tim/Rev Solo Pit/Rev Drums Flg/Rev Percus Cho/Rev Plate Pitch Vocal Tremolo Ambi Dly+Rev Orche Cho+Rev Studio Flg+Rev Se ...

  • Zoom 1204 - page 9

    ■ 8 ■ DC9V 300mA MIDI IN MODEL 1204 ZOOM STUDIO OUTPUT RL INPUT R L/MONO ZOOM CORPORATION MADE IN JAPAN / FABRIQUÉ AU JAPAN SERIAL NO. (1) (2) (3) (4) (1) DC INPUT jack The cable from the supplied AC adapter is connected here. (2) MIDI jack Serves for connection to equipment with a MIDI OUT jack, such as another effect device, synthesizer or s ...

  • Zoom 1204 - page 10

    Connections Connect an electronic instrument, microphone, mixer , or other audio equipment to the 1204 as described below . Before making any connections, set the power switches of all equipment to OFF . If the equipment is on, sudden noise surges can lead to hearing damage or damage to the equipment. ■ 9 ■ Precaution DC9V 300mA MIDI IN MODEL 1 ...

  • Zoom 1204 - page 11

    ■ Connection between electronic instrument and playback equipment This connection example shows use of the 1204 as an effect device for electronic instruments. When using the unit in a monaural configuration, connect only the L jack. The balance between the original sound of the instrument and the effect sound is adjusted by the MIX LEVEL control ...

  • Zoom 1204 - page 12

    Rack Mount • This unit uses a metal enclosure and is heavier than it might seem at first glance. When mounting the unit in a rack, be sure to fasten it secur ely with screws, and use a rack that provides sufficient rigidity . If the unit is not secured properly , it can fall down and cause damage and injury . • Do not stack the unit dir ectly o ...

  • Zoom 1204 - page 13

    OPERA TION This chapter will help you get acquainted with the 1204, showing you how to use and change effects and how to store settings. ■ 12 ■ ...

  • Zoom 1204 - page 14

    Operation States The 1204 has various operation states. Basically , there are three modes and three functions. ■ Modes • Manual mode: In this mode, the front-panel controls and switches of the 1204 operate as shown on the unit, letting you directly select and use effects. • Memory mode: In this mode, you can choose one of 100 effect settings ...

  • Zoom 1204 - page 15

    Mode Selection Normally , the unit is turned on by pressing the POWER switch without holding down any other key . This activates the manual mode. The unit can be switched later between manual mode and memory mode with the MODE key . T urning the unit on by pressing the POWER switch while holding down the STORE key activates the recall mode. After & ...

  • Zoom 1204 - page 16

    Functions Functions are certain actions or commands that can be carried out in the various modes. Depending on the mode, only certain functions are available, as listed below . • Manual mode: Store function, effect on/of f function • Memory mode: Store function, effect on/of f function, MIDI channel setting function • Recall mode: Store funct ...

  • Zoom 1204 - page 17

    T rying out the 1204 ■ Power -on 1. With all power switches set to OFF , connect the 1204 and all other devices. Caution: Set input and output level controls on all devices to minimum. 2. Switch the devices on in the following order (for turning the power off, proceed in the opposite order): (1) Instruments or other sound source to be used as inp ...

  • Zoom 1204 - page 18

    ■ Adjusting an effect When an effect and pattern have been selected, you can further adjust the ef fect to your liking. 1. Select the effect as described above. 2. Select the pattern as described above. 3. Use the MIX LEVEL control to adjust the balance between DR Y and WET sound. 4. Use the EQ LOW control to adjust the low-fr equency boost or cu ...

  • Zoom 1204 - page 19

    ■ Storing effect settings in memory If you have followed the various steps described above, you have selected an effect and pattern and adjusted the effect sound. When you have found a setting that you like, you can easily store this setting in the memory of the 1204, so that you do not have to make the same adjustments every time you want to use ...

  • Zoom 1204 - page 20

    ■ Switching between manual mode and memory mode The currently active mode is shown by the MODE indicator . In manual mode, the indicator is on, and in memory mode, the indicator is off. In manual mode, all effect settings can be checked visually . This mode therefore is suitable for cases where parameters of an effect are to be fine-adjusted in r ...

  • Zoom 1204 - page 21

    ■ Editing a stored setting The memory mode normally serves to call up effect settings stored in manual mode. However , when wishing for example to slightly alter a parameter or to change only the EQ setting of an effect and store it in another memory number , it is not necessary to switch to manual mode and start the adjustment over from the begi ...

  • Zoom 1204 - page 22

    MIDI control ■ MIDI channel setting function MIDI control signals (such as program change and control change messages, see below) are always sent with a certain channel number (1 Ð 16). The receiving side can select which channels to receive. MIDI control signals can be divided into several types. The 1204 can only process so-called program chan ...

  • Zoom 1204 - page 23

    ■ Using MIDI to change effect parameters The 1204 allows the use of MIDI control change messages to change effect parameters. This includes all parameters except changing the ef fect type (as performed with the EFFECT selector or BANK switch) and adjusting the INPUT and OUTPUT level controls. Using control change messages to change effect paramet ...

  • Zoom 1204 - page 24

    MENO ■ 23 ■ ...

  • Zoom 1204 - page 25

    EFFECT TYPES, EFFECT P A TTERNS, EFFECT P ARAMETERS This chapter describes the various effect types, effect patterns, and effect parameters. ■ 24 ■ ...

  • Zoom 1204 - page 26

    ■ Category: REV (Reverb) ■ 25 ■ Explanation of terms ¥ Diffusion: Adjusts the scope of the reverb effect. ¥ Attack: Emphasizes the reverb attack. ¥ High Cut: Attenuates the high frequencies. ¥ Pre Delay: Adjusts the interval between the original sound and the reverb sound. ¥ High Multipl: Adjusts the duration of high-frequency reverb. ¥ ...

  • Zoom 1204 - page 27

    Explanation of terms ¥ Modulation Depth: Adjusts the depth of modulation. ¥ Modulation Frequency: Adjusts the rate of modulation. ¥ Modulation Delay: Adjusts the delay until the start of modulation. ¥ Modulation Feedback: Adjusts the amount of modulation feedback. ¥ Semi T one Shift: Shifts the pitch in semitone steps. ¥ Detune W idth: Fine-t ...

  • Zoom 1204 - page 28

    Explanation of terms ¥ Reverb T ime: Adjusts the duration of the reverb sound. ¥ Reverb Mix: Adjusts the level of the reverb sound only . ■ 27 ■ ■ Category: SERI (Serial) ■ Category: P ARA (Parallel) Explanation of terms ¥ Echo Mix: Adjusts the level of the echo sound only . BANK EFFECT P A TTERN EDIT 1 EDIT 2 COMMENT 5 DL Y + REV Serial ...

  • Zoom 1204 - page 29

    ■ Category: SFX (Special Effects) ■ 28 ■ Explanation of terms ¥ V ocoder T ype: Changes the V ocoder character . ¥ Rotary T ype: Adjusts the character of the rotary speaker sound. ¥ Distortion T ype: Changes the distortion character. ¥ V ocoder Distortion: Adjusts the V ocoder distortion. ¥ Horn Speed: Adjusts the high-frequency rotation ...

  • Zoom 1204 - page 30

    MEMO ■ 29 ■ ...

  • Zoom 1204 - page 31

    IMPORT ANT INFORMA TION This chapter describes troubleshooting steps and safety precautions. ■ 30 ■ ...

  • Zoom 1204 - page 32

    T roubleshooting If there seems to be a problem with your 1204, please check the following points first. ■ 31 ■ Symptom Check Remedy No sound or volume is very low . Is AC adapter connected correctly and is unit turned on? Make connections as described in "Connections" and turn the unit on as described in "Power-on. " Is ins ...

  • Zoom 1204 - page 33

    ■ 32 ■ W as editing carried out in memory mode? The effect settings called up in memory mode have no relationship to the position of the controls on the front panel. If a setting was not edited, the original (stored) setting, not the current position of the control, is effective. Therefore the stored settings will not reflect the control positi ...

  • Zoom 1204 - page 34

    Usage Precautions ■ Electrical interference For safety considerations, the 1204 has been designed to provide maximum protection against the emission of electromagnetic radiation from inside the device, and from external interference.However , equipment that is very susceptible to interference or that emits powerful electromagnetic waves should no ...

  • Zoom 1204 - page 35

    MEMO ■ 34 ■ ...

  • Zoom 1204 - page 36

    Specifications ZOOM STUDIO 1204 • Number of pr eset programs: 512 (16 effects x 2 banks x 16 patterns) • Pr ogram memory capacity: 100 settings (overwrite and store) 612 programs • A/D converter: 18 bit, 128 times oversampling • D/A converter: 18 bit, 128 times oversampling • Sampling fr equency: 44.1 kHz • Fr equency response: 10 Hz Ð ...

  • Zoom 1204 - page 37

    1204 MIDI IMPLEMENT A TION 1.TRANSMITTED DA T A NONE 2.RECOGNIZED DA T A 1) CHANNEL VOICE MESSAGES T able 1. ■ 36 ■ ST A TUS SECOND THIRD DESCRIPTION 101 1 nnnn 0ccc cccc 0vvv vvvv CONTROL CHANGE nnnn : MIDI Channel No.( 0000 11 11 ) ccc cccc : Control No. ( See T able 1 ) vvv vvvv : Control V alue ( See T able 1 ) 1 100 nnnn 0ppp pppp ---- --- ...

  • Zoom 1204 - page 38

    ZOOM CORPORA TION NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, T okyo 183, Japan PHONE: 0423-69-71 1 1 F AX: 0423-69-71 15 Printed in Japan 1204-5000 ...

Fabbricante Zoom Categoria Musical Instrument

I documenti che otteniamo dal fabbricante del dispositivoZoom 1204 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Zoom
- manuali per l’uso 1204
- schede prodotto Zoom
- opuscoli
- o etichette energetiche Zoom 1204
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Zoom 1204.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Zoom 1204, manuali di manutenzione, brevi manuali o manuali utente Zoom 1204. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Zoom 1204.

Manuali per l’uso simili

Manuale completo del dispositivo Zoom 1204, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Zoom 1204 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Zoom 1204.

Il manuale per l’uso completo Zoom, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Zoom 1204 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Zoom 1204, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Zoom 1204 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Zoom 1204 - che ci dovrebbe aiutare nei primi passi durante l'uso Zoom 1204
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Zoom 1204
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Zoom 1204 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Zoom 1204?

Utilizza il modulo sottostante

Se non hai risolto il problema con Zoom 1204 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Zoom 1204 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)