Italiano dropdown-ico

Manuale per l’uso Brother HL-2140

174 pagine 7.64 mb
Scarica

Vai alla pagina of 174

Summary
  • Brother HL-2140 - page 1

    Confidential Brother Laser Printer SERVICE MANUAL MODEL: HL-2140/2150N/2170W Read this manual thoroug hly before maintenance work. Keep this manual in a convenient place fo r quick and easy reference at all times. Sep 2007 SM-PRN066 84UA0* (1) ...

  • Brother HL-2140 - page 2

    Confidential © Cop yright Brother Indu stries, L td. 2007 Compilation and Publication: This manua l has been complied and pub lished, und er the supervision of Brother Industries Ltd., cov ering the latest product descriptions and specif ications. The contents of this manual and the specifications of this product are subje ct to change without not ...

  • Brother HL-2140 - page 3

    i Confidential PREF A CE This ser vice ma nual contains basic informa tion required for after-sales ser vice of th e laser printe r (hereinafte r ref erred to as "the mach ine" ). This inf orm ation is vit al to the service personnel to ma intain the high printing quality and perf or mance of the machi ne. This ser vice ma nual cov ers th ...

  • Brother HL-2140 - page 4

    ii Confidential APPENDIX 1: SERIAL NUMBERING SYSTEM APPENDIX 2: SCREW CA T ALOGUE APPENDIX 3: DELETION OF PERSONAL INFORMA TION APPENDIX 4: REFERENCES APPENDIX 5: GLOSSAR Y Inf or mation in this manual is su bject to change due to impro vement or red esign of the product. All rele vant inf or m ation in such cases will be supplied in serv ice info ...

  • Brother HL-2140 - page 5

    iii Confidential TABLE OF CONTENTS REGULATION ................. ................ ................. ................ ................. .............. ......... vii SAFETY INFORMATION ...... ................................ .............. ............... .............. .......... xi CHAPTER 1 TROUBLESHOOTING ... ............................ ......... ...

  • Brother HL-2140 - page 6

    iv Confidential 2. PACKING .. ................ .................... ................ ................ ................ .................... ........... ..... ........... 3-2 3. SCREW TORQUE LI ST .................. ................ ................ ................. ................... ................ ..... ... 3-3 4. LUBRICATIO N ................ ...

  • Brother HL-2140 - page 7

    v Confidential 8.21.3 TONER LED PCB ASSY ............... ................. ................................ ................ ...... 3-46 8.22 LVPS ... ................... ................ ................ ................ ................. ................... ............ ....... ... 3-4 8 8.22.1 PS PCB UNIT ............. ................ ......... ...

  • Brother HL-2140 - page 8

    vii Confidential REGULA TION <For Eur ope and Other countries> ■ Radio interference (220 to 24 0 v olt model only) This machine f ollows EN55022 (CIS PR Publication 22 )/Class B. ■ IEC 60825-1 specification (220 to 240 v olt model onl y) This machine is a Class 1 lase r product as defined in IEC 6 0825-1 specifica tions. The lab el shown ...

  • Brother HL-2140 - page 9

    viii Confidential ■ Internal laser radiation Maximum radiation power: 10 mW W av e length: 780 - 800 nm Laser class: Class 3B ■ EU Directive 2002/96/EC and EN50419 (European Union only) This equipment is marked with the re cycling symbol belo w . It means that at the e nd of the li f e of the equipmen t yo u must di spose of it separ ately at a ...

  • Brother HL-2140 - page 10

    ix Confidential <For USA and Ca nada> ■ Federal Comm unications Commission (FCC) Dec laration of Conformity (For USA) Responsib le P ar ty: Brother International Cor poration 100 Somerset Corporate Boule vard P .O . Bo x 6911 Bridgewa ter , NJ 08807-0911 USA T elephone: (908) 704-1700 declares, that the prod ucts Product name: Laser Printer ...

  • Brother HL-2140 - page 11

    x Confidential ■ Industry Canada Compliance Statement (For Canada) This Class B digital appara tus complies with Canadian ICES-003. Cet appareil n umérique de la classe B est conf or me à la nor me NMB-003 du Canada. ■ Laser Safety (110 to 120 v olt model onl y) This machine is certified as a Class 1 laser product under the U .S. Department o ...

  • Brother HL-2140 - page 12

    xi Confidential SAFETY INFORMA TION ■ Caution fo r Laser Pr oduct (W ARNHINWEIS fur Laser druc ker) CA UTION: When the machine during servicing is operated with the co v er open, the regulations of VBG 93 and the perf ormance instr uctions f or VBG 93 are v alid. CA UTION: In case of any troub le with the laser unit, replace the laser unit itself ...

  • Brother HL-2140 - page 13

    xii Confidential ■ Definitions of W arnings, Cautions, Notes and Memos The f ollowing con ventions are used in this manual: Mark Contents W ar nin gs tell you what to do to pre v ent possible personal injur y . Electrical Hazard icons aler t you to a possib le electr ical shock. Hot Surf ace icons warn you not to touch ma chine par ts that are ho ...

  • Brother HL-2140 - page 14

    xiii Confidential ■ Safety Precautions Listed belo w are the v arious kinds of “W A RNING” messages included in this manual. WARNING There are high v oltage electrodes inside the machine . Bef ore you clean t he inside of the machine or replace parts, mak e sure that y ou hav e turned off the pow er s witch and unplugged th e machine from the ...

  • Brother HL-2140 - page 15

    xiv Confidential Caution Lightning and po wer surges can damage this pr oduct! W e recommend that y ou use a quality surge protectio n de vice on the A C pow er line, or unplug the ma chine during a lightning storm. WARNING DO NO T use flammable su bstances or an y ty pe of spr a y to clean the inside or outside of the machine . Doing this ma y cau ...

  • Brother HL-2140 - page 16

    1-1 Confidential CHAPTER 1 TR OUBLESHOO TING 1. INTR ODUCTION T roubleshooting is t he countermeasure procedures that the service personnel should f ollow if an error or malfunct ion occurs with the machine . It is impossible to anticipa te all of the possib le troub les which ma y occur in future and determine the troub leshooting procedures , so ...

  • Brother HL-2140 - page 17

    1-2 Confidential 1.2 Initial Chec k Check the f ollowing items before at tempting to repair the machine. ■ Operating En vironment (1) Put your mach ine on a flat, stab le surf ace such as a desk that is free of vibr ation and shocks . (2) Use the machine in a well-v entilated room; use the machine with in the f ollowing ranges of temper ature and ...

  • Brother HL-2140 - page 18

    1-3 Confidential (2) Cleaning Use a soft dr y cloth. CAUTION: DO NO T use flammab le substances or any type of spra y to clean the inside or outside of the mach ine. Doing this may cause a fire or e lectrica l shock. ...

  • Brother HL-2140 - page 19

    1-4 Confidential 2. DISTINGUISH ERR OR CA USE 2.1 LED indication 2.1.1 LED indication at Operator Calls Distinguish the contents of message by LED i ndica tion in the control panel. See the ref erence page and tak e the correctiv e action described f or each indication to correct it. when t he red Error LED is ON or blinking to indicate it, the mac ...

  • Brother HL-2140 - page 20

    1-5 Confidential 5) No paper fed tra y 1 N/A 1-9 6) No paper fed man ual feed slot N/A 1-10 7) Drum error N/A 1-10 8) Fr ont co ver is open N/A 1-12 9) Fuser co ver is open N/A 1-12 10) P aper jam (JAM TRA Y 1, JAM INSIDE /JAM REAR) N/A 1-13 11) M emory full Ye s 1-15 12) Print o verrun Ye s 1-15 LED T ype of error Error cleara nce by pressing the ...

  • Brother HL-2140 - page 21

    1-6 Confidential 2.1.2 LED indicati on at Service Calls If service calls occur , all four LEDs blin k on and off t o notice it. And th en when press the [Go] but ton, distinguish a f ault from the specific combination of ON/ OFF and status color of the LED . When entering this state , instruct the end user to turn off the po wer s witch, wait a f e ...

  • Brother HL-2140 - page 22

    1-7 Confidential 2.2 Message indication 2.2.1 Err or indicati on at Service Calls When the ser vice call is generated, th e machine can distinguish the type of er ror by print printer settings or p rinting of mainten ance. ( Ref er to "1.3 Ser vice Mod e" in Chapter 5.). See the ref erence page to tak e the correctiv e action Error indica ...

  • Brother HL-2140 - page 23

    1-8 Confidential 2.3 Error Cause and Remed y Memo : • The f ollowing troublesho oting sections contai n both the actions which end user s should take or check and th e ones which ser vice technicians should perf orm. 1) T oner low Replacing of the toner ca r trid ge 2) Drum life end soon Replacing of drum u nit 3) T oner car tridge is at the end ...

  • Brother HL-2140 - page 24

    1-9 Confidential 4) Cartridg e position err or Identification f ailure for a new toner car tr idge. 5) No paper fed tra y 1 No paper in T ra y (T1) User Check • Install the toner ca r tridges into the machine properly . Step Cause Remedy 1 P ower off or front co v er opened while detecting a ne w toner car tridge. Reset the de v eloping bias v ol ...

  • Brother HL-2140 - page 25

    1-10 Confidential 6) No paper fed man ual feed slot No paper in manu al f eeding 7) Drum err or Dir t on drum unit User Check • Load the paper Step Cause Remedy 1 Harnes s connection f ailure of registration front sensor PCB ASSY Check the har ness connection of th e registration front sensor PCB ASSY . 2 Registration front sensor PCB f ailure Ch ...

  • Brother HL-2140 - page 26

    1-11 Confidential ■ Electr odes location of the drum unit Fig. 1-1 ■ Electr odes location of the mac hine Fig. 1-2 Side surf ace of Drum unit Side surf ace of F rame L ASSY inside ...

  • Brother HL-2140 - page 27

    1-12 Confidential 8) Fr ont cover is open F ront cov er opened 9) Fuser co ver is open Fuser co v er opened User Check • Check if the fron t cov e r is closed cer tainly . Step Cause Remedy 1 Cov er sensor harness ASSY f ailure Check the sensor performance following the procedure in "F actor y Inspecti on Mode" (Chapter 5). If any p rob ...

  • Brother HL-2140 - page 28

    1-13 Confidential 10) P aper jam •J A M T R A Y 1 No paper in T ra y 1 (T1) Fig. 1-3 User Check • Check if the paper is jammed in th e appropriate tra y . If jammed, remo v e it. • Adjust the paper guid e corresponding to th e paper size . • Check if too much pa per is loaded in the tra y . Step Cause Remedy 1 Edge actuator or reg istra tio ...

  • Brother HL-2140 - page 29

    1-14 Confidential • JAM INSIDE/J A M REAR P aper jam inside the machine User Check • Check if the paper is ja mmed. If ja mmed, remo v e it. • Check if the fuse r cov e r is closed cer tainly . Step Cause Remedy 1 Harnes s connection f ailure of registration front sensor PCB ASSY , paper eject sensor PCB ASSY or registration rear sensor PCB A ...

  • Brother HL-2140 - page 30

    1-15 Confidential 11) Memory full Memory full 12) Print overrun Data e xpansion is not in time 13) Main PCB failure 14) Fuser unit failure CA UTION: This problem will be cleared if leaving the machine po wer ON for ten minutes. T ur n the powe r on while pressing the SW supporter , when the fron t cov er is open. And check that T oner , Drum and Er ...

  • Brother HL-2140 - page 31

    1-16 Confidential 15) Laser unit failure Laser diode failure 16) Main motor failure 17) High-v oltage power suppl y PCB failure 18) Fan fa ilure Step Cause Remedy 1 Laser unit harness connection f ailure Check t he two harness connections o f the laser unit and r econnect them. 2 FG harness A SSY connection f ailure Chec k the FG harness ASSY conne ...

  • Brother HL-2140 - page 32

    1-17 Confidential 3. P APER FEEDING PROBLEMS Prob lems related to paper f eeding are end user reco v erab le if follo wing the User Check items . If the same prob lem occurs again, follo w each procedur e in the order of the n umber descr ibed in the Step column in th e tables below . 3.1 No Feeding 3.2 Double Feeding Step Cause Chec k Result Remed ...

  • Brother HL-2140 - page 33

    1-18 Confidential 3.3 P aper Jam ■ P aper jam in the paper tray and fr ont cover ■ P aper jam in the back co ver and paper eject section Step Cause Chec k Result Remedy 1 Registration f ront actuator/edg e actuator catchi ng on some position Does the registration front actuator/edge actuator mov e sm oothly? No Re-assemb le the registrat ion fr ...

  • Brother HL-2140 - page 34

    1-19 Confidential 3.4 Dirt on Paper 3.5 Wrinkles or creases 3.6 W aves in the paper / f olds in the paper at the eject roller 2 User Check • Check if the pap er is loaded into the paper tray correctly . • T ur n ov er the stac k of paper in the pape r tra y , or try rotating the p aper 180° in the paper tra y . Step Cause Check Result Remedy 1 ...

  • Brother HL-2140 - page 35

    1-20 Confidential 3.7 Curl in the paper (1) T urn the Nip release lev er of right and left to the direction of the arro w . (2) Hold and turn the PR stopper plate of right and left. Fig. 1-4 Step Cause Check Result Remedy 1 Fuser unit pressure is hig h Is the prob lem solve d after replacing the position of the pressure roller? Ye s Replace the pos ...

  • Brother HL-2140 - page 36

    1-21 Confidential 4. IMA GE DEFECT TROUBLESHOO TING 4.1 Image Defect Examples Fig. 1-5 4.2 Diameter of Rollers Image def ects which appear periodically ma y be caused by f a ilure of a roller . Specify the cause ref err ing to the dia meter of the roller s or pitch which ap pears in the image as sho wn in the table below . No . P ar ts name Diamete ...

  • Brother HL-2140 - page 37

    1-22 Confidential 4.3 T roubleshooting Ima ge Defect Image def ect related prob lems are end user reco verab le if foll owing the User Chec k items. If the same pr oblem o ccurs, f ollow each procedure in the order of the number described in the Step column in the tables below . ■ Light User Check • Chec k the machine's en vironment. High ...

  • Brother HL-2140 - page 38

    1-23 Confidential ■ Faulty registration ■ Dark User Check • Chec k that the app ropriate media type is selected in the printer driver . Step Cause Check Result Remedy 1 Registration r ear actuator catching on some position Does the registrati on rear actuator mo ve smoothly? No Re-assemb le the registrat ion rear actuator . User Check • Che ...

  • Brother HL-2140 - page 39

    1-24 Confidential ■ P oor fixing ■ Completely b lank User Check • Replace the drum unit with a ne w one. • Replace the toner cartr idge with a ne w one. Step Cause Check Result Remedy 1 Fuser unit f ailure Is the prob lem solv ed after replacing th e fuser unit? Ye s Replace th e fuser unit. 2 Low-v oltage powe r supply PCB f ailure Is the ...

  • Brother HL-2140 - page 40

    1-25 Confidential ■ Image distortion Step Cause Check Result Remedy 1 Laser unit not assembled correctl y Is the laser unit assembled into the machin e securely? (Chec k if there is no gap.) Ye s Assemble the laser unit correctly an d secure the scre w . 2 Incorrect radiation angle of scanner diode of laser unit. Scanner m otor rotation f ailure ...

  • Brother HL-2140 - page 41

    1-26 Confidential ■ All blac k Step Cause Check Result Remedy 1 Corona wire f ailure Are the electrod es on the dru m unit and machine body dirty? Ye s Clean both electrodes. 2 Is the coro na wire damaged? Ye s Replace th e drum unit. 3 Scanner h arn ess of the laser unit connection f ailure Is the scanner ha rness of the laser unit connected se ...

  • Brother HL-2140 - page 42

    1-27 Confidential ■ Dirt on the back of paper ■ V ertical streaks CA UTION: If the machine prints the same pattern, especially including v er tical streaks , continuously , bl ack v er tical streaks ma y appear on the paper since the elect rostatic perf or mance of the e xposure dr um is decrease d temporally . ■ Black v ertical streaks in a ...

  • Brother HL-2140 - page 43

    1-28 Confidential ■ Black ho rizontal stripes Fig. 1-6 User Check • Clean the inside of the machin e and the corona wire in the drum unit. • Replace the drum unit with a ne w one. Step Cause Check Result Remedy 1 Dir t on th e charged electrod e Are the electrod es on the dru m unit and machine body dirty? Ye s Clean both electrodes 2 P aper ...

  • Brother HL-2140 - page 44

    1-29 Confidential ■ White vertical streaks ■ White horizontal streaks User Check • Clean the scanner win dows of th e laser unit with a soft lint-free cloth. • Replace the toner cartr idge with a ne w one. • Chec k the machine’ s environment. High temp erature and h igh humidity conditions ca n cause this prob lem. • Damp (wet ) paper ...

  • Brother HL-2140 - page 45

    1-30 Confidential ■ Faint p rint ■ White spots User Check • Chec k that the machine is installed on a le vel surf ace. • Replace the toner car tridge with a ne w one. • Clean the scanner win dows of t he toner unit with a so ft cloth. Step Cause Check Result Remedy 1 Main PCB failure Is the problem solv ed after replacing th e main PCB AS ...

  • Brother HL-2140 - page 46

    1-31 Confidential <Clean the drum unit as f ollows> If yo u hav e print quality problems , clean the drum unit as f ollows: (1) Put the print sample in front of t he drum unit, and find th e e xact position of the poor print. Fig. 1-7 (2) T ur n the dr um unit gear to th e direction of the arr ow of the figure by hand while looking at the sur ...

  • Brother HL-2140 - page 47

    1-32 Confidential ■ Black s pots ■ Black ba nd User Check • Damp (wet ) paper might be used. T ry to change to freshly unpac ked paper . • T oner ma y be empty . Replace the toner car tridge with a new one . • If the problem is not solved after printing a fe w pages, the dru m unit ma y hav e glue fro m label stoc k on the e xposure drum ...

  • Brother HL-2140 - page 48

    1-33 Confidential ■ Downwar d fogging of solid color ■ Horizontal lines User Check • T oner ma y be empty . Replace the toner car tridge with a new one . Step Cause Check Result Remedy 1 HVPS PCB f ailure Is the prob lem solved after replacing th e HVPS PCB ASSY? Ye s Replace the HVPS PCB ASSY . 2 Main PCB failure Is the problem solv ed after ...

  • Brother HL-2140 - page 49

    1-34 Confidential ■ Ghost ■ Fogging CA UTION: This prob lem often occurs when the drum unit or toner car tridge is nearly at the end of lif e. User Check • Chec k the machine's en vironment, cond itions such as high or low humidity may cause this s ituation to o ccur . • Chec k that the appropriate media type or size is selected in the ...

  • Brother HL-2140 - page 50

    1-35 Confidential 5. SOFTW ARE SETTING PROBLEMS The machine ma y not print the data correctly if there are incorre ct software settings. User Check • Check that the USB cab le and the network cab le is not damaged or br oken . • Check th at the correct machine is selected if you ha ve an inter f ace s witching device . • Check the description ...

  • Brother HL-2140 - page 51

    1-36 Confidential 6. NETWORK PR OBLEM S User Check • Check th e descriptions in the netwo rk user’ s guide. • T r y resetting the f actor y settings. Step Cause Check Result Remedy 1 Wireless LAN PCB f ailure (HL-2170W) Is the prob lem solved after replacing th e wireless LAN PCB ASSY? Ye s Replace the wireless LAN PCB ASSY . 2 Main PCB failu ...

  • Brother HL-2140 - page 52

    1-37 Confidential 7. O THERS PROBLEMS ■ The machine is not tu rned on, or the LED indicatio n does not appear . ■ The fan does not w ork. Step Cause Check Result Remedy 1 Har ness connection f ailure of panel PCB Is the harness of the panel PCB ASSY connected corr ectly? No Reconnect t he panel PCB ASSY har ness. 2 P anel PCB f ailure Is the pr ...

  • Brother HL-2140 - page 53

    2-1 Confidential CHAPTER 2 PERIODI CAL MAINTENANCE T o av oid creating second ar y prob lems by mishand ling, f ollow the warnings below during maintenance w ork. 1. CONSUMABLE P ARTS The consumab le par ts described in this section are par ts which are subject to deterior ation or damage and should be replaced at least once during th e period of w ...

  • Brother HL-2140 - page 54

    2-2 Confidential 2. PERIODICAL PEPLA CEMENT P ARTS There are no parts to be replaced periodically . ...

  • Brother HL-2140 - page 55

    3-1 Confidential CHAPTER 3 DISASSEMBL Y AND ASSEMBL Y 1. SAFETY PRECA UTIONS T o av oid creating second ar y prob lems b y mishandling, f ollow the warnings and precautions below during maintenance work. • Be careful not to lose scr ews , washers , or other pa r ts remov ed. • Be sure to apply grease to the gears and applicab le positions speci ...

  • Brother HL-2140 - page 56

    3-2 Confidential 2. P A CK ING Fig. 3-1 DEMO Insertion Set guide USB IF cable AC cord Pad Option carton Pad Carton Accessory bag Machine ...

  • Brother HL-2140 - page 57

    3-3 Confidential 3. SCREW T ORQUE LIST Location of screw Screw type Q’ty Tight ening torque N m (kgf · cm) KEY ST OPPER T a ptite cup B M3x8 2 0.4 ± 0.05 (4 ± 0.5) INNER CHUTE ASSY T a ptite bind B M4x12 2 0.6 ± 0.1 (6 ± 1) FUSER UNIT T aptite pan (washer) B M4x14 20 . 8 ± 0.1 (8 ± 1) SIDE CO VER R ASSY T a ptite bind B M4x12 2 0.8 ± 0.1 ...

  • Brother HL-2140 - page 58

    3-4 Confidential * The parenthesis sho ws the numb er of scre ws f or HL-2150N/217 0W . UNDER FG WIRE T aptite bind B M4x12 1 0.8 ± 0.1 (8 ± 1) T aptite cup S M3x 6 SR 1 0.8 ± 0.05 (8 ± 0.5) DRIVE SUB ASSY T aptite cup S M3x6 SR 1 0.6 ± 0.1 (6 ± 1) T aptite bind B M4x12 9 0.8 ± 0.1 (8 ± 1) NEW T ONE R SENSOR HARNESS ASSY T aptite bind B M3x ...

  • Brother HL-2140 - page 59

    3-5 Confidential 4. LUBRICA TION The kind of t he lubricating oil (Mak er name) Lubrication point Quantity of labrication BG-MU (Kanto Kase i) De v gear joint/53R Drive sub ASSY Drum gear 25L/139L 2mm dia. ball MOL YK O TE EM-D110 (Dow Corning T oray) Separation pad ASSY 2mm dia. ball BG2 EM2 DEV gear joint / 53R BG2 2 places BG2 4 places BG2 2 pla ...

  • Brother HL-2140 - page 60

    3-6 Confidential 5. O V ER VIEW OF GEARS Fig. 3-2 CA UTION: The par t codes of gear s are subject to chang e without notice . 1 2 3 4 6 7 8 10 11 17 15 16 14 13 9 5 12 1 2 3 4 6 7 8 10 11 17 15 16 14 13 9 5 12 EJECT OR GEAR 17 (LU2016001) EJECT OR GEAR 15/25 (LU2018001) EJECT OR GEAR 26 (LU2017001) FUSER GEAR 22/37 (LU2015001) DEV GEAR 17/33L (LU20 ...

  • Brother HL-2140 - page 61

    3-7 Confidential 6. HARNESS RO UTING 1 FUSER UNIT 2 FG HARNESS PS PCB unit Fuser unit Eject sensor PCB ASSY Laser unit FG harness Main PCB ASSY <Left side> <Back side> ...

  • Brother HL-2140 - page 62

    3-8 Confidential 3 MAIN FRAME R ASSY 4 Wireless LAN PCB ASSY (only HL-2170W) / T oner LED PCB ASSY / PS PCB unit / Main PCB ASSY F ront cover senser PS PCB unit SW holder Inlet har ness ASSY T oner LED PCB ASSY Fan motor 60 unit PS PCB unit T oner LED PCB ASSY Wireless LAN PCB ASSY (only HL-2170W) Main PCB ASSY (Main F rame L ASSY) <Back side> ...

  • Brother HL-2140 - page 63

    3-9 Confidential 5 T ONER LED PCB ASSY / REG ISTRA TION FR ONT SEN SOR PCB ASS Y / REGISTRA TION REAR SE NSOR PCB AS SY 6 P ANE L PCB ASSY / T ONER SENSOR PCB UNIT ASS Y / NEW T ONER SENSOR HARNE SS ASSY Registration rear sensor PCB ASSY Registration front sensor PCB ASSY T oner LED PCB ASSY <Front side> <Right side> T oner sensor PCB u ...

  • Brother HL-2140 - page 64

    3-10 Confidential 7 HIGH-V OL T AGE PS PCB / REGISTRA TIO N SOLENOID / T1 SOLEN OID High-voltage PS PCB ASSY T1 solenoid Registration solenoid Drive sub ASSY T1 solenoid Registration solenoid <Left side> <Left side> <Front side> <Bottom side> <Bottom side> <Bottom side> ...

  • Brother HL-2140 - page 65

    3-11 Confidential 7. DISASSEMBL Y FLO W Fig. 3-3 FUS ER UNI T CO R NER CO VE R TO P C O V E R A SSY M A I N P C B A SSY DRI VE SUB A SSY SW S UPPORT E R F I L TE R A SSY 15s/15s 15s/15s 20s/20s 15s/15s 20s/20s 30s/30s 10s/10s 5s/5s 10s/15s 5s/5s 5s/10s 10s/10s 5s/5s 10s/10s 15s/15s 15s/15s 15s/15s 35s/35s 10s/10s 20s/20s 5s/5s 40s/40s 10s/10s 20s/2 ...

  • Brother HL-2140 - page 66

    3-12 Confidential 8. DISASSEMBL Y PROCEDURE 8.1 P APER TRA Y UNIT / SEP ARA TION P AD ASSY (1) Pull out the P aper tra y unit from the Main body . (2) Lift up the Se paration pad ASSY . (3) Release the Boss to remov e the Sepa ration pad ASSY from the P aper tra y unit. (4) Remov e the Separation pad spring from the P aper tra y unit. Fig. 3-4 Sepa ...

  • Brother HL-2140 - page 67

    3-13 Confidential 8.2 FR ONT CO VER ASSY / SW KEY 8.2.1 FRONT CO VER ASSY (1) Open the F ront cov er ASSY . (2) Release the Hook to remove the D EV joint link from the F ront cover ASSY . Fig. 3-5 F ront cover ASSY DEV joint link Hook 1 2 ...

  • Brother HL-2140 - page 68

    3-14 Confidential (3) Release the Hook of the Front cov er ASSY from the F ront cov er top. (4) Remov e the Boss of the F r ont chute ASSY , and then remov e the F ront cov e r ASSY from the Main bo dy . Fig. 3-6 F ront cover ASSY F ront cover ASSY F ront cover top F ront cover top F ront chute ASSY F ront chute ASSY Hook Boss (F ront chute ASSY) B ...

  • Brother HL-2140 - page 69

    3-15 Confidential 8.2.2 SW KEY (1) Remov e the two T a ptite cup B M3x 8 screws, and then remove the K ey stopper f rom the F ront cov er ASSY . (2) Remove the SW k ey from the F ront cov er ASSY . Fig. 3-7 CA UTION: When operate while havin g the screw inst allation par t of the SW k ey , be careful not to damage it. K ey stopper SW K ey T aptite ...

  • Brother HL-2140 - page 70

    3-16 Confidential Assembling Note: When operate while havin g the Scre w installation par t of the SW ke y , be careful not to damage it. Fig. 3-8 Hook F ront cover ASSY SW ke y Screw installation part a b ...

  • Brother HL-2140 - page 71

    3-17 Confidential 8.3 B ACK CO VER / OUTER CHUTE ASSY 8.3.1 BA CK CO VER (1) Open the Bac k co v er . (2) Release the Boss of the Outer chute ASSY from the Bac k cov er . (3) Release the Hook from the Side co ver R ASSY . (4) Slide the Bac k cov er from the Main body , and remov e it. Fig. 3-9 Boss Back co ver Back co ver Hook Boss Boss Side cov er ...

  • Brother HL-2140 - page 72

    3-18 Confidential 8.3.2 OU TER CHUTE ASSY (1) Release the Boss to remov e the Oute r chute ASSY fr om the Main body . Fig. 3-10 Boss (Fuser cov er ASSY) Boss (Fuser cov er assy) Outer chute ASSY Outer chute ASSY Outer chute ASSY 1a 1a 1a 1b ...

  • Brother HL-2140 - page 73

    3-19 Confidential 8.4 FUSER CO VER ASSY 8.4.1 FUSER C O VER ASSY (1) T ake do wn the Fuser cov er ASSY . (2) Remov e the Fuser cov er ASSY from the Main body . Fig. 3-11 Boss Boss Fuser cov er ASSY Fuser cov er ASSY 2 2 2 1 ...

  • Brother HL-2140 - page 74

    3-20 Confidential 8.4.2 EJECT ACTU A T OR / EJECT A CTU A T OR SPRING (1) Release the Hook to slide the Eject a ctuator , and then rem ov e t he Eject actu ator from the Fuser cov e r ASSY . (2) Remov e the Eject actuator spring from the Eject actuator . Fig. 3-12 1a 1b 1c 2 Eject actuator Eject actuator Eject actuator Fuser cov er ASSY Hook Eject ...

  • Brother HL-2140 - page 75

    3-21 Confidential 8.4.3 EJECT ROLLER ASSY 1 / BUSH C / B USH R / BUSH L (1) Release the Hook of the Bush C from the Fuser cov er ASSY . (2) Remov e the Eject roller ASSY 1 from the Fuser cov e r ASSY . Fig. 3-13 (3) Remov e the Bush C , the Bush R and the Bush L from the Eject roller ASSY 1. Fig. 3-14 Eject roller ASSY 1 Bush C Hook Fuser cov er AS ...

  • Brother HL-2140 - page 76

    3-22 Confidential 8.5 INNER CHUTE ASSY (1) Remov e the two T aptite bind B M4x12 scre ws, and then remo v e the Inner chute ASSY from Main body . Fig. 3-15 T aptite bind B M4x12 Inner chute ASSY ...

  • Brother HL-2140 - page 77

    3-23 Confidential 8.6 FUSER UNIT (1) Disconnect the Connector . Fig. 3-16 CA UTION: Pull out the Connecto r from the Housing part of the Main body left side. (2) Disconnect the two Connectors from the Eject sensor PCB ASSY . Fig. 3-17 Fuser unit Connector Housing par t Fuser unit Eject sensor PCB ASSY Connector ...

  • Brother HL-2140 - page 78

    3-24 Confidential (3) Remov e the two T aptite pan (w asher) B M4x1 4 scre ws, an d then remo v e the Fuser unit from the Main bo dy . Fig. 3-18 T aptite pan (washer) B M4x14 Fuser unit ...

  • Brother HL-2140 - page 79

    3-25 Confidential 8.7 SIDE CO VER R ASSY (1) R emov e the two T aptite bind B M 4x12 screws. (2) Release the Hook to remove the Si de cov er R ASSY from the Main body . Fig. 3-19 Hook Hook Hook T aptite bind B M4x12 T aptite bind B M4x12 Side cov er R ASSY ...

  • Brother HL-2140 - page 80

    3-26 Confidential 8.8 CORNER CO VER (1) Remov e the T aptite bind B M4x12 scre w . (2) Release the Hook to remo ve the Corner cov er from the Main body . Fig. 3-20 Corner cover T aptite bind B M4x12 Hook ...

  • Brother HL-2140 - page 81

    3-27 Confidential 8.9 SIDE CO VER L ASSY (1) R emov e the two T aptite bind B M 4x12 screws. (2) Release the Hook to remove Side co v er L ASSY from the Main body . Fig. 3-21 Side cov er L ASSY T aptite bind B M4x12 T aptite bind B M4x12 Hook Hook Hook ...

  • Brother HL-2140 - page 82

    3-28 Confidential 8.10 ROLLER HOLDER ASSY (1) Release the Boss of the Rolle r holder ASSY from the Link ar m. (2) Press the Rib of the P ape r f e ed frame, and the slide the Separation R shaft bush. (3) Remove the Roller holder ASSY from the Main body . Fig. 3-22 Roller holder ASSY Roller holder ASSY Separation R shaft bush P aper f eed frame ASSY ...

  • Brother HL-2140 - page 83

    3-29 Confidential Assembling Note: When assembling the Roller holder ASSY to the Main body , note the assemb ling method ref err ing to the figure b elow . Fig. 3-23 CA UTION: When the Separa tion R shaft b ush does not slide, put t he Rib of the Bush 6 while aligning the Groov e of the Main body shaf t hole from the Main frame L ASSY side. Groov e ...

  • Brother HL-2140 - page 84

    3-30 Confidential 8.11 WIRELESS LAN PCB ASSY (only HL-2170W) (1) Disconnect the Connector from the Wireless LAN PCB ASSY . (2) Release the Hook to remove the Wi reless LAN PCB ASSY from the Main body . Fig. 3-24 Connector Hook Wireless LAN PCB ASSY Wireless LAN PCB ASSY Hook 1a 2a 1 1a 2b ...

  • Brother HL-2140 - page 85

    3-31 Confidential 8.12 MAIN SH IELD CO VER PLA TE (1) Remov e the three T aptite cup S M3x6 SR screws , and then remo ve the Main shield cov e r plate from t he Main bo dy . Fig. 3-25 T aptite cup S M3x6 SR T aptite cup S M3x6 SR Main shield cov er plate ...

  • Brother HL-2140 - page 86

    3-32 Confidential 8.13 MAIN PCB ASSY (1) Disconnect the six FFCs and the three Connectors from the Main PCB ASSY . (2) Remov e the four T aptite cup S M3x6 SR screws , and then remo ve the FG harness ASSY and Main PCB ASSY from the Main body . Memo : The fiv e T aptite cup S M3x6 SR screws . (HL-2150N/2170W only) Fig. 3-26 Assembling Note: If the F ...

  • Brother HL-2140 - page 87

    3-33 Confidential 8.14 T OP CO VER ASSY 8.14.1 T OP CO VER ASSY (1) R emov e the two T aptite bind B M 4x12 screws. (2) Release the Hook to remo ve the T op cov er ASSY from the Main body . Fig. 3-27 T aptite bind B M4x12 Hook Hook Hook T op cover ASSY 2a 2b ...

  • Brother HL-2140 - page 88

    3-34 Confidential 8.14.2 P APER ST ACK LEVER (1) Release the Boss to remo v e the tw o P aper stack le vers from the T op cov er ASSY . Fig. 3-28 P aper stack le ver P aper stack le ver P aper stack le ver Boss T op cover ASSY 1b 1b 1a 1a ...

  • Brother HL-2140 - page 89

    3-35 Confidential 8.14.3 SUPPOR T FLAP 1 / SUPPORT FLAP 2 (1) Release the Boss to remo v e the Supp or t flap 1 fr om the Main body . (2) Release the Boss to remo v e the Supp or t flap 2 fr om the Main body . Fig. 3-29 Suppor t flap 1 Suppor t flap 2 Boss Boss 1b 2b 1a 1a T op cover ASSY 2a 2a ...

  • Brother HL-2140 - page 90

    3-36 Confidential 8.14.4 EJECT ROLLER ASSY 2 / B US H R / BUSH L (1) Remove the Eject roller ASSY 2 from the T op cov er ASSY . (2) Remov e the Bush R and the Bush L from the Eject roller ASSY 2. Fig. 3-30 Eject roller ASSY 2 Bush L Bush R T op cover ASSY 2a 1 2b 2b 1 ...

  • Brother HL-2140 - page 91

    3-37 Confidential 8.15 SW SUPPORTER (1) Release the Hook to remo ve the SW suppor ter from the Main body . Fig. 3-31 SW suppor ter P anel PCB ASSY Hook Rib Hole 1a 1a 1b ...

  • Brother HL-2140 - page 92

    3-38 Confidential 8.16 P ANEL PCB ASSY (1) Remov e the P anel film. (2) Remov e the T aptite cup B M3x8 scre w . (3) Remov e the P anel PCB ASSY from the Main body . (4) Disconnect the two conne ctors from t he P anel PCB ASSY . Fig. 3-32 P anel film P anel PCB ASSY Connector T aptite cup B M3x8 1 3 4 ...

  • Brother HL-2140 - page 93

    3-39 Confidential 8.17 HIGH-V OL T A GE PS PCB ASSY (1) Disconnect the two connect ors from the High-v oltage PS PCB ASSY . (2) Remov e the two T aptite cup S M3x6 SR screws and the tw o T aptite bind B M4x12 screws . (3) Release the Hook to remove High-v olt age PS PCB ASSY from the Drive sub ASSY . Fig. 3-33 Note: There are procedu res f or disas ...

  • Brother HL-2140 - page 94

    3-40 Confidential 8.18 NEW T ONER SE NSOR HARNESS ASSY (1) Release the Hook to remo v e the New t oner sensor harness ASSY from the Main body . Fig. 3-34 CA UTION: Be careful not to damage t he Hook of the Ne w toner sensor harness ASSY . New toner sensor harness ASSY New toner sensor harness ASSY Hook 1b 1a 1a ...

  • Brother HL-2140 - page 95

    3-41 Confidential 8.19 FIL TER ASSY (1) Remov e the Filter ASSY from the Main body . Fig. 3-35 Filter ASSY ...

  • Brother HL-2140 - page 96

    3-42 Confidential 8.20 LASER UNIT (1) Remov e the four T aptite cup S M3x6 SR screws, and then remo v e the Laser unit from the Main bo dy . Memo : • The two T aptite cup S M3x6 SR scre ws and the tw o T aptite pan (S/P washe r) S M3x8 screws . (HL-2150N/2170W only) • Remove the Laser unit in t he state that the DEV joint link is pulled out. Fi ...

  • Brother HL-2140 - page 97

    3-43 Confidential (2) Remove the T aptite cup S M3x6 SR scre w , and then remov e the FG har ness ASSY from the Laser unit. (3) Remov e the T a ptite cup S M3x 6 SR screw , and then rem ov e th e Air duct from the Laser unit. Fig. 3-37 CA UTION: When replacing the Laser unit, replace the Seri al label attached on the Drive sub ASSY with a new on e ...

  • Brother HL-2140 - page 98

    3-44 Confidential 8.21 F AN MO T OR 60 UNIT / CO VER SENSOR HARNESS ASS Y / TO NER LED PCB ASSY 8.21.1 F AN MOT OR 60 UNIT (1) Disconnect the Connector from the T oner LED PCB ASSY . (2) Remov e the F an motor 60 unit from the Ma in body . Fig. 3-39 F an motor 60 unit Connector T oner LED PCB ASSY 2 1 ...

  • Brother HL-2140 - page 99

    3-45 Confidential 8.21.2 CO VER SENSOR HARNESS ASSY (1) Disconnect the Connector from the T oner LED PCB ASSY . (2) Release the Hook to remove the Co ve r sensor har ness ASSY fr om the Main body . Fig. 3-40 CA UTION: When removing the Co ver sensor har ness ASSY , remov e it as shown in the direction of the allo w 2b . Be careful not to damage the ...

  • Brother HL-2140 - page 100

    3-46 Confidential 8.21.3 T ONER LED PCB ASSY (1) Disconnect the thre e connectors from the T oner LED PCB ASSY . (2) Release the Hook to remove the T o ner LED PCB ASSY from the Main body . Fig. 3-41 Hook Connector T oner LED PCB ASSY Connector 1a 2b 2a 1 1 1 2a 1 1 1 ...

  • Brother HL-2140 - page 101

    3-47 Confidential (3) Release the Hook to remo ve t he LED holder from the T oner LED PCB ASSY . Fig. 3-42 Hook T oner LED PCB ASSY LED holder ...

  • Brother HL-2140 - page 102

    3-48 Confidential 8.22 L VPS 8.22.1 PS PCB UNIT (1) Remov e the T aptite pan (S/P w a sher) M3.5x6 screw and the two T aptite cup S M3x6 SR screws, and then remove the L V shield plate cov er and the L V insulation she et from L V Shield plate 2. Fig. 3-43 T aptite cup S M3x6 SR T aptite cup S M3x6 SR T aptite pan (S/P washer) M3.5x6 L V shield pla ...

  • Brother HL-2140 - page 103

    3-49 Confidential (2) Remov e the T aptite bind B M4x12 scre w , and then remo ve the SW holder from the Main body . (3) Remov e the T aptite pan (S/P w asher) M3.5x6 scre w , and then remov e the FG harness ASSY of the Inlet harness ASSY fr om the L V shield plate 2. (4) Remov e the two T aptite flat B M3x10 scre w s, and then remov e the Inlet ha ...

  • Brother HL-2140 - page 104

    3-50 Confidential 8.22.2 L V SHIELD PLA TE 2 (1) Remov e the two T aptite bind B M4x12 screws and t he two T aptite cup S M3x6 SR screws, and then remove the L V shield plat e 2. Fig. 3-45 T aptite cup S M3x6 SR T aptite cup S M3x6 SR T aptite bind B M4x12 L V shield plate 2 ...

  • Brother HL-2140 - page 105

    3-51 Confidential 8.23 REGISTRA TION FR ONT SENSOR PCB ASSY (1) Remov e the Har ness of the Registration front sensor PCB ASSY a nd Registration rear sensor PCB ASSY from the Guide part of the Main body . Fig. 3-46 Harness Guide par t ...

  • Brother HL-2140 - page 106

    3-52 Confidential (2) Remov e the two T aptite bind B M3x10 scre ws, and then remo v e the Actuator holder ASSY from the Main body . Fig. 3-47 Actuator holder ASSY T aptite bind B M3x10 ...

  • Brother HL-2140 - page 107

    3-53 Confidential (3) Remov e the Registrat ion actuat or spring from the Hook par t. (4) Release the Hook to tur n the Regist ration front actua tor . (5) Slide the Registrati on front actuato r to remo ve the Registr ation front actu ator from the Actuator holder ASSY . Fig. 3-48 4a 4b 5d 3 5a Registration front actuator Hook Hook par t Registrat ...

  • Brother HL-2140 - page 108

    3-54 Confidential (6) Remov e the Edge actuator spring from the Act uator holder ASSY . (7) Release the Hook and Slide the Edge actuator to remo ve the Edge actuat or from the Actuator holder ASSY . Fig. 3-49 Edge actuator Edge actuator spring Edge actuator Actuator holder ASSY Hook 7c 7b 7a 6 ...

  • Brother HL-2140 - page 109

    3-55 Confidential (8) Remov e the T aptite bind B M3x10 scre w , and then remo ve the Registr ation front sensor PCB ASSY from the Actuator holder ASSY . Fig. 3-50 T aptite bind B M3x10 Registration front sensor PCB ASSY Actuator holder ASSY ...

  • Brother HL-2140 - page 110

    3-56 Confidential 8.24 REGISTRA TION REAR SENSOR PCB ASSY (1) Remov e the Har ness of the Registration re ar sensor PCB ASSY from the Guide par t of Main body . Fig. 3-51 Harness Guide par t ...

  • Brother HL-2140 - page 111

    3-57 Confidential (2) Remov e the two T aptite bind B M3x10 screws , and then remov e the Rear actuator holder ASSY from the Main body . Fig. 3-52 Rear actuator holder ASSY T aptite bind B M3x10 ...

  • Brother HL-2140 - page 112

    3-58 Confidential (3) Remov e the Actuator spring rear from the Hook part. (4) T ur n the Registr ation act uator rear . (5) Slide the Registratio n actuator rear to re mov e the Registration actu ator rear from the Rear actuat or holder ASSY . Fig. 3-53 5b 5a 4 5a Rear actuator holder ASSY Actuator spring rear Registration actuator rear Registrati ...

  • Brother HL-2140 - page 113

    3-59 Confidential (6) Remov e the T aptite bind B M3x10 scre w , and then remov e the Registrati on rear sensor PCB ASSY from the Rear actuator holder ASSY . Fig. 3-54 T aptite bind B M3x10 Rear actuator holder ASSY Registration rear sensor PCB ASSY ...

  • Brother HL-2140 - page 114

    3-60 Confidential 8.25 DRIVE SUB ASSY (1) Remov e the T aptite cup S M 3x6 SR scre w and the T aptite bind B M4x1 2 scre w , and then remov e the Unde r FG wire from t he Main body . Fig. 3-55 Main frame L ASSY T aptite cup S M3x6 SR T aptite bind B M4x12 Under FG wire ...

  • Brother HL-2140 - page 115

    3-61 Confidential (2) Remov e the T aptite cup S M3x6 SR screw and the nine T aptite bind B M4x12 screws , and then r emov e t he Drive sub ASSY from the Main bo dy . Fig. 3-56 CA UTION: When removing the Drive sub ASSY , put the left side of the Main body as the top as shown in the abov e figure because ther e is risk of the fall of the g ears. T ...

  • Brother HL-2140 - page 116

    3-62 Confidential 8.26 DEV JOINT / DEV GEAR JOINT/53R / REGISTRA TION PENDULUM GEAR SPRING (1) Remov e the DEV joint and the DEV joint spring from the DEV gear joint/53R. (2) Remove the DEV gear joint/ 53R from the Drive sub ASSY . (3) Remove the Registr ation pendulum gear spring from the Dr ive sub ASSY . Fig. 3-57 DEV gear joint / 53R Registrati ...

  • Brother HL-2140 - page 117

    3-63 Confidential 8.27 T ONER SENSOR PCB UNIT ASSY (1) Remov e the T aptite bind B M3x10 scre w , and then remov e the T oner sensor PCB unit ASSY from the Main body . (2) Remove the PT sensor holder fr om the T oner sensor PCB unit ASSY . Fig. 3-58 T oner sensor PCB unit ASSY T aptite bind B M3x10 PT sensor holder T oner sensor PCB unit ASSY Hook ...

  • Brother HL-2140 - page 118

    3-64 Confidential 8.28 REGISTRA TION SOLENOID / T1 SOLENOID 8.28.1 REGISTRA TION SOLENOID (1) Remov e the T1 sector gear spring from the T1 gear 38/31 sector . (2) Remov e the T1 gear 38/31 sector from the Ma in body . (3) Release the Hook to remo ve the Registr ation gear 25 terminal from the Main body . (4) Remove the Registr ation diff er ential ...

  • Brother HL-2140 - page 119

    3-65 Confidential (5) Remov e the Registration soleno id le v er spring from the Main body an d Registration solenoid le ver . (6) Remov e the Harness from the guide par t of Main body . (7) Remov e the T aptite bind B M3x10 scre w , and then remov e the Registration soleno id from the Main bo dy . (8) Remov e the Registration solenoid le ver fr om ...

  • Brother HL-2140 - page 120

    3-66 Confidential 8.28.2 T1 SOLENOID (1) Remov e the T1 solenoid lev er spring from the Main body and T1 solenoid le ver . (2) Remov e the Harness from the Guide part of the Main body . (3) Remov e the T aptite bind B M3x10 scre w , and then remov e the T1 solenoid from the Main body . (4) Remov e the T1 solenoid lev er from the T1 solenoid. Fig. 3 ...

  • Brother HL-2140 - page 121

    3-67 Confidential 8.29 MAIN SH IELD PLA TE / EJECT SENSOR PCB ASSY (1) Remov e the three T aptite bind B M3x10 screws , and then remov e the FU front paper guide from the Main bo dy . Fig. 3-62 T aptite bind B M3x10 FU front paper guide ...

  • Brother HL-2140 - page 122

    3-68 Confidential (2) Remov e the two T aptite cup S M3x6 SR screws , and then remov e the Chute ground plate from th e Main body . Fig. 3-63 T aptite cup S M3x6 SR T aptite cup S M3x6 SR Chute ground plate ...

  • Brother HL-2140 - page 123

    3-69 Confidential (3) Remov e the Main PCB sheet from the Main shield plate . (4) Remov e the three T aptite bin d B M4x12 screws , and then remov e the Main shield plate from the Main bo dy . Fig. 3-64 T aptite bind B M4x12 T aptite bind B M4x12 Main shield plate Main PCB sheet 3 4 ...

  • Brother HL-2140 - page 124

    3-70 Confidential (5) Release the Hook to remove the Ejec t sensor PCB ASSY from the Main body . Fig. 3-65 Eject sensor PCB ASSY Hook ...

  • Brother HL-2140 - page 125

    3-71 Confidential 8.30 RUBBER FOO T (1) Remov e the two Rubbe r f eet from the Main body . Fig. 3-66 Rubber f oot ...

  • Brother HL-2140 - page 126

    3-72 Confidential 8.31 MAIN FRAME L ASSY (1) Remov e the three T aptite bind B M3x10 screws , and then remov e the FU front paper guide from the Main bo dy . Fig. 3-67 Note: The procedure f or disassemblin g the Main fr ame L ASSY after "8.17 HIGH-V OL T A GE PS PCB ASSY" is described below . T aptite bind B M3x10 FU front paper guide ...

  • Brother HL-2140 - page 127

    3-73 Confidential (2) Remov e the two T aptite cup S M3x6 SR screws , and then remov e the Chute ground plate from th e Main body . Fig. 3-68 T aptite cup S M3x6 SR Chute ground plate ...

  • Brother HL-2140 - page 128

    3-74 Confidential (3) Release the Hook to remo ve the Regist ration gea r 25 terminal, the two F eeder gear 17 ter minals and the Bush 6. Fig. 3-69 Registration gear 25 terminal Bush 6 Feeder gear 17 terminal Hook 3a 3b 3c 3b 3c 3d 3a ...

  • Brother HL-2140 - page 129

    3-75 Confidential (4) Remov e the T aptite cup S M 3x6 SR scre w and the T aptite bind B M4x1 2 scre w , and then remov e the Unde r FG wire from t he Main body . Fig. 3-70 Main frame L ASSY T aptite cup S M3x6 SR T aptite bind B M4x12 Under FG wire ...

  • Brother HL-2140 - page 130

    3-76 Confidential (5) Remov e the fo ur T aptite bind B M4x12 scre ws and the two T aptite cup S M3x6 SR screws , and then remov e the Main frame L ASSY from the Main body . Memo : • Remov e the Main frame L ASSY in the state that the DEV joint link is pulled out. Fig. 3-71 T aptite bind B M4x12 T aptite cup S M3x6 SR <Upper surface of Main fr ...

  • Brother HL-2140 - page 131

    4-1 Confidential CHAPTER 4 ADJUSTMENTS AND UPD A TING OF SETTINGS, REQUIRED AFTER P AR TS REPLA CEMENT 1. IF Y OU REPLA CE THE MA IN PCB <What to do when replacing the main PCB> • Re writing the firmware (Main Prog ram) • Setting t he def ault paper siz e • Setting the se rial number • Inputting the ad justed v alue of the laser scann ...

  • Brother HL-2140 - page 132

    4-2 Confidential (6) Setting file of the def ault paper siz e s2100EUR.pjl (A4 siz e), s2100USA.pjl ( Letter size) s2100ISR.pjl (A4 size , Israeli font f or Israel) * No PJL file is required for China (7) Download Utility (FILEDG32.EXE) Cop y it into the "hl2100" folder th at has been cre ated in the C drive. (8) Brother Maintena nc e USB ...

  • Brother HL-2140 - page 133

    4-3 Confidential ■ Rewriting the fi rmware (Main Pr ogram) <Installing the maintenance printer driver> T o id entify ter minals c onnected vi a USB interface, the PC requires the correspondin g vir tual USB de vices to be implemented b y driver . If you connect an y number of the machine to y our PC , theref ore, the same number of vir tual ...

  • Brother HL-2140 - page 134

    4-4 Confidential (8) Aler t war ning message of WHQL appears three times. Clic k Continue An ywa y to proceed. (9) If the de vice driver is successfully install ed, the follo wing message screen appears. Click Finish to retur n. (10) Connect the machine to y our PC using the USB cab le. (11) Select “Install the softwa re automatica lly (Recommend ...

  • Brother HL-2140 - page 135

    4-5 Confidential (12) Aler t wa r ning message of WHQL appears . Click Cont inue An ywa y to proceed. (13) If the Brothe r Maintenanc e USB Pr inter dr iv er is successfully installed, the f ollowing message screen appears. Click Finish to return. ...

  • Brother HL-2140 - page 136

    4-6 Confidential <Pr ocedures> After the inst allation procedu re of the Brot her Maintenanc e USB Pr inter driver is completed, ref er to the f ollowing steps f or the detailed procedures to re wr ite the progr am files. I f the Brother Main tenance USB Printer Driver has a lready been insta lled to yo ur PC , star t to rewrite the prog ram ...

  • Brother HL-2140 - page 137

    4-7 Confidential ■ Setting the default paper size <Pr ocedures> (1) Open the "hl2000" f older and doub le-clic k the FILEDG32.EXE icon to start. Select the applicab le machine and clic k it. (Make sure that t here is the icon of the connect ed machine and that no erro r occurs. ) (2) Drag "s2100EUR" (A4 siz e), "s21 ...

  • Brother HL-2140 - page 138

    4-8 Confidential ■ Setting the serial number <Pr ocedures> (1) C onnect the PC and machine with the USB cable. (2) Double-click the brmainte. EXE file (maint enance utility) which has been copied in the “hl2100” f older to start. Select Input Inf or mation from Menu . Select the applicab le model name. (3) Check the po r t (USB) which t ...

  • Brother HL-2140 - page 139

    4-9 Confidential ■ Inputting the adjusted v alue of the laser scanner <Pr ocedures> (1) Select “Adjust Scanner” fr om Menu. (2) Check the po r t (USB) that the machine is co nnected through . (3) Enter the figures (the last f our digits) shown on the label attach ed on the chassis at the right hand side of the main PCB into the bo x at ...

  • Brother HL-2140 - page 140

    4-10 Confidential ■ Setting the toner cartridg e type The “T oner Lif e End” message is displa yed acco rding to the upper limit va lue of the de veloping roller rot ation. The upper limit valu e is diff erent between the st ar ter toner car tr idge, standard one an d high-capac ity one. Theref ore, it is necessary to set the conf or mable v ...

  • Brother HL-2140 - page 141

    4-11 Confidential 2. IF Y OU REPLA CE THE WIRELESS LAN PCB <What to do when replacing the wireless LAN PCB> • Back up to the Main PCB of the Wireless LAN PCB Inf ormation (HL-2170W only) <Which parts to use> WIRELESS LAN PCB ASSY <What y ou need to prepare> (1) HL-2170W target machine ■ Backu p to the Main PCB of the Wireless ...

  • Brother HL-2140 - page 142

    4-12 Confidential 3. IF Y OU REPLA CE THE LA SER UNIT ■ Inputting the adjusted v alue of the laser scanner (1) Double-click the brmainte.EXE file (maint enance utility). (2) Select “Input Inf or mation” from Men u. Select the applicab le model name. (3) Check the po r t (USB) that the machine is co nnected through . (4) Select “Adjust Scann ...

  • Brother HL-2140 - page 143

    5-1 Confidential CHAPTER 5 SER VICE SUPPORT SOFTW ARE 1. CONTR OL P ANEL V arious modes can be used if the powe r s w itch is set to ON while the [Go] b utton is held. There are tw o types of modes: User Mode and Ser vice Mode. Thr ee types of LED displa y are used to indicate tha t present setting. • T oner/Dr um/Error LEDs are lighted at the sa ...

  • Brother HL-2140 - page 144

    5-2 Confidential 1.1 List of servi ce suppor t functions Fr o n t cov er Press the [Go] button or SW suppor ter when sifting the mode Press the [Go] b utton or SW supporter when selecting th e function Function Ref er to: Close Once Once 1) T est Sample P age 5-4 T wic e 2) Print Fonts 5-4 Three times 3) USB 2.0 FULL Serial Number Return V alue Set ...

  • Brother HL-2140 - page 145

    5-3 Confidential 1.2 User Mode Basically , user mode s hould be accesse d by servic e personne l only . Howev er , if there is demand, y ou can disclose to end users. <Pr ocedure> (1) Chec k that the front cover is closed. (2) T ur n ON the power s witch while holding down the [Go] b utton. Chec k that T oner/Drum/Error LEDs are lighted. (3) ...

  • Brother HL-2140 - page 146

    5-4 Confidential <Function> Functions of each “User Mod e”. 1) T est Sample Pa ge The machine prints a demo page. The machine returns to the ready status after printing. 2) Print Fonts It is an eff ective function only f or HL-2150N/2170W . The machine prints a list of the internal fo nts. The mach ine returns to the ready status afte r p ...

  • Brother HL-2140 - page 147

    5-5 Confidential 1.3 Service Mode The service mode is exclusiv ely designed f or the purpose of checks , settings and adjustments , and this function sh ould be accessed b y ser vice personnel only . Y ou can perf or m a print test and display the log inf or mation. <Pr ocedure> (1) Chec k that th e front cover is open. (2) T ur n ON the powe ...

  • Brother HL-2140 - page 148

    5-6 Confidential Press the SW s upporter twice Press the SW suppor ter again depen ding on the necessary number of times after chec k that T oner/Drum/Error LEDs are lighted. Press the SW supporter more than 2 seconds (l ong push). Check that Error LED is lighted. CA UTION: • Each mode star ts 2 second s after pressing th e SW suppor ter . • If ...

  • Brother HL-2140 - page 149

    5-7 Confidential <Function> Functions of each “Service Mode”. 9) Factory Inspec tion Mode This mode chec ks the opera tion of each sensor , solenoid, f an, scanner motor and main motor to chec k the point with the malfunction, when repair the machine. • This mode is included in the machine softw are. • The machine goe s into the inspe ...

  • Brother HL-2140 - page 150

    5-8 Confidential • Chec k that the T oner LED goes o ut. V eri fy that the Re ady LED is lit whe n pressing the [Go] button while the fr ont cov er is closed. (When y ou press the [Go] button while th e front co ve r is closed, the T oner LED goes out. ) It remains off while the [G o] bu tton is being pressed. • Chec k the fa n operation . Clos ...

  • Brother HL-2140 - page 151

    5-9 Confidential 15) P aper Siz e Setting (A4/Letter) Y ou can select the paper siz e setting (A4/Letter) of the ma chine body . Whene ver y ou s witch this mode, the setting is changed o v er from the presen t one to other . Y ou can v erify the setting change b y LEDs when releasing the SW suppor ter . When the T oner and Drum LEDs light f o r 1 ...

  • Brother HL-2140 - page 152

    5-10 Confidential Displa y ter ms is as follo ws. CA UTION: • * is display ed only in maintenance inf or mation. • Some margin of error m ust be taken into consider ation because cov erage fo r the prin table area of A4-size paper is calculated using vi deo signals. Series name Model name of machine Serial Number Ser ial numbe r of machine De v ...

  • Brother HL-2140 - page 153

    5-11 Confidential 17) Printer Settings If y ou want t o know the drum unit lif e or the number of printed pages, y ou should print out the Printer Se ttings. The “Printer Settin gs” is configur ed with one page f or HL-2140, three pages f or HL-2150N and f our pages f or HL-2170W (The wired LA N and wireless LAN is set to ON). All pages ha v e ...

  • Brother HL-2140 - page 154

    5-12 Confidential ■ Pa g e 1 This page includes v arious sett ing inf or mation of the machine. • Printer inf ormation In the f ollowing order - Co ntroller V ersion (CONT .ROM VERSION) - Net wor k V ersion (NET ROM VERSION) But, HL-2140 is not indicated - RAM SIZE (Mbyte) • Printer settings inf o rmation Each ter m is indicated when if fulfi ...

  • Brother HL-2140 - page 155

    5-13 Confidential CA UTION: • The drum unit lif e is shown by the band gr aph at the center of Printer Settin gs. Drum Unit Life How to Read the Drum Unit Life - It initially indicates 100% and gr adually decreases . - It indicates 0% when the Drum LED is blinking. - It stays at 0% ev en if fur ther print ing is done. How to calculate th e drum u ...

  • Brother HL-2140 - page 156

    5-14 Confidential (2) Counter information, histor y inf or mation The counter and histo r y inf or mation related to the f ollowing term are included. When it reaches the maximum count, each term is no longer count ed. P age Count The total num ber of printed pages . The maximum count is 1 million pages. T otal Pa ges Printed T he number of time s ...

  • Brother HL-2140 - page 157

    5-15 Confidential ■ Pa g e 3 , 4 These pages inclu de various netw ork settings inf or mation of the machine. 18) Sleep Mode Indication (OFF/Dimmed) This is to select whether the Ready LED is tu r ned off completely or lit in blue with lo w light intensity during the Sleep mode . Whenev er you s witch this mode, the setting is changed o ve r from ...

  • Brother HL-2140 - page 158

    5-16 Confidential 2. O THER SER VICE FUNCTIONS 2.1 User Maintenance Mode This section describes what the end user sho uld do when replacing the consumab le par ts. ■ Resetting the drum counter The printed image ma y deteriorate when using the drum unit to a cer tain degree . The machine de tects how much the dr um unit is used with th e dru m cou ...

  • Brother HL-2140 - page 159

    5-17 Confidential ■ Initializing the de veloping bias When replacing the to ner car tridge with a ne w one, the ne w toner sensor detects th at the toner car tridge is replaced, and the de velopin g bias is initialized au tomatically . Theref ore, the end user is not necessary to initialize the de veloping bia s. If replacing the ton er car tridg ...

  • Brother HL-2140 - page 160

    6-1 Confidential CHAPTER 6 CIRCUIT DIA GRAMS, WIRING DIA GRAM ■ Main PCB Circuit Dia gram (1/4) + D B A C E F E D B A C F 8 7 6 1 8 7 6 5 4 3 2 4 3 2 1 5 0 0 0 5 R C G O L A N A ] 7 [ A T A D g n i d r a u g G O L A N A ] 8 [ A T A D ] 5 1 [ A T A D ] 3 1 [ A T A D G O L A N A ] 4 1 [ A T A D G O L A N A G O L A N A ] 5 [ A T A D ] 3 [ A T A D ] ...

  • Brother HL-2140 - page 161

    6-2 Confidential ■ Main PCB Circuit Dia gram (2/4) D B A C E F E D B A C F 8 7 6 1 8 7 6 5 4 3 2 4 3 2 1 5 0 0 0 5 R C ] 7 [ R D A ] 0 1 [ R D A ] 6 [ R D A ] 5 [ R D A ] 7 [ A T A D ] 3 1 [ A T A D ] 3 [ A T A D ] 5 [ A T A D ] 2 1 [ A T A D ] 1 [ A T A D ] 4 [ A T A D ] 6 [ A T A D g n i d r a u g ] 0 [ A T A D ] 0 1 [ A T A D ] 8 1 [ R D A ] 9 ...

  • Brother HL-2140 - page 162

    6-3 Confidential ■ Main PCB Circuit Dia gram (3/4) + D B A C E F E D B A C F 8 7 6 1 8 7 6 5 4 3 2 4 3 2 1 5 0 0 0 5 R C G O L A N A 2 . 1 5 . 1 G O L A N A G O L A N A 2 . 1 G O L A N A 2 . 1 5 . 1 5 . 1 2 . 1 2 . 1 0 . 2 5 . 1 5 . 0 2 . 1 5 . 1 G O L A N A 3 . 0 3 . 0 G O L A N A 5 . 0 G O L A N A 5 . 1 5 . 1 5 . 0 3 . 0 G O L A N A G O L A N A ...

  • Brother HL-2140 - page 163

    6-4 Confidential ■ Main PCB Circuit Dia gram (4/4) D B A C E F E D B A C F 8 7 6 1 8 7 6 5 4 3 2 4 3 2 1 5 0 0 0 5 R C ] 8 [ A T A D ] 9 [ A T A D ] 0 1 [ A T A D ] 1 1 [ A T A D ] 2 1 [ A T A D ] 3 1 [ A T A D ] 4 1 [ A T A D ] 5 1 [ A T A D ] 0 [ A T A D ] 1 [ A T A D ] 2 [ A T A D ] 3 [ A T A D ] 4 [ A T A D ] 5 [ A T A D ] 6 [ A T A D ] 7 [ A ...

  • Brother HL-2140 - page 164

    6-5 Confidential ■ High-v oltage Po wer Supply PCB Circuit Diagram ...

  • Brother HL-2140 - page 165

    6-6 Confidential ■ Low-v oltage P ower Supply PCB Cir cuit Diagram (100V) ...

  • Brother HL-2140 - page 166

    6-7 Confidential ■ Low-v oltage P ower Supply PCB Cir cuit Diagram (200V) ...

  • Brother HL-2140 - page 167

    6-8 Confidential ■ Wiring Diagra m ...

  • Brother HL-2140 - page 168

    App. 1-1 Confidential APPENDIX 1 SERIAL NUMBER ING SYSTEM Each machine has a serial number labe l f or the machine itse lf and property labels for some other parts. Ref er to the inf o rmation below f or the meaning o f the serial number and property codes and the lo cation of each label. ■ Serial number labels f or the machine itself <How to ...

  • Brother HL-2140 - page 169

    App. 1-2 Confidential ■ Laser unit serial label <How to Read> Fig. App. 1-3 <Location> Fig. App. 1-4 LUS Model distinction Y delay X delay Serial number Frame manufacturer and mold distinction T1 the 1st mold Y3 the 3rd. mold Polygon motor distinction Inspection machine Serial label Drive sub ASSY Drive sub ASSY Serial label Serial la ...

  • Brother HL-2140 - page 170

    App. 1-3 Confidential ■ T oner car tridge and Drum unit serial label (in common) <How to read> Fig. App. 1-5 <Location> Fig. App. 1-6 Fig. App. 1-7 Year of manufacture 7: 2007 8: 2008 Assembly line number Serial number (6-digit) Toner filling amount (A to D, 5) Manufacturing factory No. A : Jan uar y B : F ebruar y C : March D : April ...

  • Brother HL-2140 - page 171

    App. 2-1 Confidential APPENDIX 2 SCREW CA T A LOGUE Screw pan (S/P washer) T aptite flat B T aptite bind B T aptite bind B M4x12 T aptite cup B T aptite cup S T aptite bind B M3x10 T aptite cup B M3x8 T aptite cup B M4x12 Screw pan (S/P washer) M3.5x6 T aptite flat B M3x10 T aptite cup S M3x6 SR T aptite pan (S/P washer) T aptite pan (S/P washer) S ...

  • Brother HL-2140 - page 172

    App. 3-1 Confidential APPENDIX 3 DELETION OF PERSONAL INFORMA TION P ersonal inf ormation such as wired and wireless network settings in the m achine is recorded in the EEPROM on the Main PCB. F ollow the procedure desc ribed below to delete this inf or mation with a single operatio n. (Refer to "1.2 User Mo de" (Network Reset 1) in Chapt ...

  • Brother HL-2140 - page 173

    App. 4-1 Confidential APPENDIX 4 REFERENCES This page pro vides the retrie v e inf ormation. It is possible t o get the instruction of the subject by just clic k ing on the link below . 1. Message indication (Refer to “2.2 Message in dication”, Chapter 1 of the Service Manual. ) 2. Diameter of r ollers (Refer to “4.2 Diameter of Rollers”, C ...

  • Brother HL-2140 - page 174

    App. 5-1 Confidential APPENDIX 5 GLOSSAR Y ■ A CRONYMS AND TECHNICAL TERMS In this manual and the Service Reference Manual , the manual specif ic acronyms and technical terms are used in addition to the gen erally used ones . The table belo w contains typical acron yms and technical terms that are used throughout t hese manuals . * Excluding the ...

Fabbricante Brother Categoria Printer

I documenti che otteniamo dal fabbricante del dispositivoBrother HL-2140 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Brother
- manuali per l’uso HL-2140
- schede prodotto Brother
- opuscoli
- o etichette energetiche Brother HL-2140
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Brother HL-2140.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Brother HL-2140, manuali di manutenzione, brevi manuali o manuali utente Brother HL-2140. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Brother HL-2140.

Manuali per l’uso simili

Manuale completo del dispositivo Brother HL-2140, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Brother HL-2140 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Brother HL-2140.

Il manuale per l’uso completo Brother, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Brother HL-2140 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Brother HL-2140, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Brother HL-2140 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Brother HL-2140 - che ci dovrebbe aiutare nei primi passi durante l'uso Brother HL-2140
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Brother HL-2140
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Brother HL-2140 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Brother HL-2140?

Utilizza il modulo sottostante

Se non hai risolto il problema con Brother HL-2140 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Brother HL-2140 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)