Italiano dropdown-ico

Manuale per l’uso Brocade Communications Systems 53-1001762-01

252 pagine 0.81 mb
Scarica

Vai alla pagina of 252

Summary
  • Brocade Communications Systems 53-1001762-01 - page 1

    53-1 00 1 7 62-0 1 30 March 20 10 ® DRAFT: BROCADE CONFIDENTIAL Con v erged Enhanced Etherne t Command Re fe r e n c e Suppor ting F abric OS v6.4.0 ...

  • Brocade Communications Systems 53-1001762-01 - page 2

    DRAFT: BROCADE CONFIDENTIAL Copyright © 2006-20 10 Brocade Communications Systems, Inc. All Rights Reserved. Brocade, the B-wing symbol, BigIr on, D CX, F abr ic OS, F astIron, IronPoint, IronShield, IronView , IronWare, JetCore, NetIron, SecureIro n, Ser v erIron, St orageX, and T urboIr on are registered trade marks, and DCFM, Extraord inar y Ne ...

  • Brocade Communications Systems 53-1001762-01 - page 3

    Converged Enhanced Ethernet Command Reference iii 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Contents About This Document In this chapt er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Suppor t ed hardware and sof ...

  • Brocade Communications Systems 53-1001762-01 - page 4

    iv Converged Enhanced Ethernet Command Reference 53-1001762-01 exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 f os . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 6 line console . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1001762-01 - page 5

    Converged Enhanced Ethernet Command Reference v 53-1001762-01 switchpor t mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1 switchpor t trunk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 vlan classifier activat e group . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1001762-01 - page 6

    vi Converged Enhanced Ethernet Command Reference 53-1001762-01 show lldp neighbors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 show lldp statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 system- description LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1001762-01 - page 7

    Converged Enhanced Ethernet Command Reference vii 53-1001762-01 clear spanning-tree count er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 7 debug spanning-tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128 error -disable-timeout enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 ...

  • Brocade Communications Systems 53-1001762-01 - page 8

    viii Converged Enhanced Ethernet Command Reference 53-1001762-01 Chapter 10 Internet Group Management Protoco l Commands clear ip igmp gr oup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 65 clear ip igmp gr oups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 66 debug ip igm p all . . . . ...

  • Brocade Communications Systems 53-1001762-01 - page 9

    Converged Enhanced Ethernet Command Reference ix 53-1001762-01 qos rcv-queue multicast rat e-limit . . . . . . . . . . . . . . . . . . . . . . . . . .204 qos rcv-queue multicast threshold . . . . . . . . . . . . . . . . . . . . . . . . .205 qos trust cos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206 show c ...

  • Brocade Communications Systems 53-1001762-01 - page 10

    x Converged Enhanced Ethernet Command Reference 53-1001762-01 ...

  • Brocade Communications Systems 53-1001762-01 - page 11

    Converged Enhanced Ethernet Command Reference xi 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL About This Document In this chapter • How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi • Suppor t ed hardware and sof tware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii • Wha ...

  • Brocade Communications Systems 53-1001762-01 - page 12

    xii Converged Enhanced Ethernet Command Reference 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL • Chapter 1 1, “RMON Commands” describes the Remot e Network Monitoring (RMON) commands used to monit or and coll ect long-t erm statistic s. • Chapter 12, “QoS Commands” describes the commands used to enable Quality of Service on the device. • ...

  • Brocade Communications Systems 53-1001762-01 - page 13

    Converged Enhanced Ethernet Command Reference xiii 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL What’s new in this document This document has been updat ed for 6.4.0. New commands ha ve been added for: • Internet Gr oup Management Pr otocol For further information about ne w features and do cumentation updat es for this release, ref er to the rele ...

  • Brocade Communications Systems 53-1001762-01 - page 14

    xiv Converged Enhanced Ethernet Command Reference 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Notes, cautions, and warnings The f ollowing notices and statements are used in this manual. They are list ed below in order of increasing sev erity of potential hazar ds. NOTE A note pr ovides a tip, guidance, or advice, em phasizes im por tant information, ...

  • Brocade Communications Systems 53-1001762-01 - page 15

    Converged Enhanced Ethernet Command Reference xv 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Additional information This section lists additional Br ocade and industry - specific docu mentation that you might find helpful. Brocade resources T o get up-to-the-minute information, go to http://m y .brocade.com and register at no cost f or a user ID and ...

  • Brocade Communications Systems 53-1001762-01 - page 16

    xvi Converged Enhanced Ethernet Command Reference 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Getting technical help Contact your switch suppor t supplier f or hardwa re, firm ware, and sof tware support, including product repairs and part ordering. T o expedit e yo ur call, hav e the f ollowing information available: 1. Gen eral Inform ation • Swi ...

  • Brocade Communications Systems 53-1001762-01 - page 17

    Converged Enhanced Ethernet Command Reference xvii 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Document feedback Quality is our first concern at Brocade and we ha ve made ev er y effor t t o ensure the accuracy and complet eness of this document. How ever , if you find an err or or an omission, or you think that a topic need s fur ther de velopment, ...

  • Brocade Communications Systems 53-1001762-01 - page 18

    xviii Converged Enhanced Ethernet Command R eference 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1001762-01 - page 19

    Converged Enhanced Ethernet Command Reference 1 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 1 CLI Basics In this chapter • Accessing the Br ocade CEE Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 • CLI command modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 • L ...

  • Brocade Communications Systems 53-1001762-01 - page 20

    2 Converged Enhanced Ethernet Command Reference 53-1001762-01 CLI command modes 1 DRAFT: BROCADE CONFIDENTIAL TA B L E 2 Accessing the CEE CLI command modes Command mode Prompt How to access the command mode Description EXEC switch > Enter the cmsh comm and at the Fabri c OS prompt after y ou hav e logged in as an ap propriate user . Displa y ru ...

  • Brocade Communications Systems 53-1001762-01 - page 21

    Converged Enhanced Ethernet Command Reference 3 53-1001762-01 L2 ACL commands 1 DRAFT: BROCADE CONFIDENTIAL L2 ACL commands Use Lay er 2 Media Access Contr ol (MAC) list commands t o do the follo wing: • Identify traffic based on the MAC- addresses, su ch as VLAN IDs and di fferent encapsulations. • Configure multiple access-list s or rules and ...

  • Brocade Communications Systems 53-1001762-01 - page 22

    4 Converged Enhanced Ethernet Command Reference 53-1001762-01 L2 ACL comman ds 1 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1001762-01 - page 23

    Converged Enhanced Ethernet Command Reference 5 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 2 Configuration Management Commands copy Copies one file to another location. Synopsis copy source-file-url destination-file-u rl Operands source-file-url Specif ies location of the source file to be copied using one of the following fo rm at s: FLASH ...

  • Brocade Communications Systems 53-1001762-01 - page 24

    6 Converged Enhanced Ethernet Command Reference 53-1001762-01 copy startup-config 2 DRAFT: BROCADE CONFIDENTIAL copy startup-config Copies the star tup configuration file to a netw ork ser v er or a file URL. Synopsis copy startup-config destination-file-url Operands des tinati on-file-url Specifies the destination path to which the s tartu p-confi ...

  • Brocade Communications Systems 53-1001762-01 - page 25

    Converged Enhanced Ethernet Command Reference 7 53-1001762-01 delete 2 DRAFT: BROCADE CONFIDENTIAL delete Delet es a specified file from the Flash. Synopsis delet e filename Operands filename Sp ecif ies t he n ame o f the file to be del eted fr om the Flash of the local switch using the following f ormat: [fl ash://]filename. Defaults There is no ...

  • Brocade Communications Systems 53-1001762-01 - page 26

    8 Converged Enhanced Ethernet Command Reference 53-1001762-01 dir 2 DRAFT: BROCADE CONFIDENTIAL dir Lists the contents of the current directory . Synopsis dir Operands none Defaults The default is the current director y . Command Modes Privileged EXEC mode Description Use this command t o list the co ntents of th e current director y . Usage Guidel ...

  • Brocade Communications Systems 53-1001762-01 - page 27

    Converged Enhanced Ethernet Command Reference 9 53-1001762-01 disable 2 DRAFT: BROCADE CONFIDENTIAL disable Exits the Privileged EXEC mode and returns to the EXEC mode. Synopsis disable Operands none Defaults There are no def ault configurations for this command. Command Modes Privileged EXEC mode Description Use this command t o exit the Privilege ...

  • Brocade Communications Systems 53-1001762-01 - page 28

    10 Converged Enhanced Ethernet Command Reference 53-1001762-01 do 2 DRAFT: BROCADE CONFIDENTIAL do Allows y ou to run commands in EXEC mode from the configuration mode. Synopsis do command Operands command Specifies the command you want to run. Defaults There are no def ault configurations for this command. Command Modes All configuration m odes De ...

  • Brocade Communications Systems 53-1001762-01 - page 29

    Converged Enhanced Ethernet Command Reference 11 53-1001762-01 enable 2 DRAFT: BROCADE CONFIDENTIAL enable Enables the Privilege EXEC mode. Synopsis enable Operands none Defaults There are no def ault configurations for this command. Command Modes EXEC mode Description Use this command t o enable the Privileged EXEC command mode. Usage Guidelines T ...

  • Brocade Communications Systems 53-1001762-01 - page 30

    12 Converged Enhanced Ethernet Command Reference 53-1001762-01 end 2 DRAFT: BROCADE CONFIDENTIAL end Returns t o the Privileged EXEC comman d mode fr om all configuration modes. Synopsis end Operands none Defaults There are no def ault configurations for this command. Command Modes All configuration m odes Description Use this command t o return to ...

  • Brocade Communications Systems 53-1001762-01 - page 31

    Converged Enhanced Ethernet Command Reference 13 53-1001762-01 erase flash 2 DRAFT: BROCADE CONFIDENTIAL erase flash Erases all the files from the Flash. Synopsis erase flash Operands none Defaults There are no def ault configurations for this command. Command Modes Configuration mode Description Use this command t o erase the files from the Flash. ...

  • Brocade Communications Systems 53-1001762-01 - page 32

    14 Converged Enhanced Ethernet Command Reference 53-1001762-01 exec-timeout 2 DRAFT: BROCADE CONFIDENTIAL exec-timeout Sets the interval that the EXEC command interpreter wait f or user input. Synopsis exec-timeout minut es seconds no ex ec-timeout Operands minut es Specif ies the time int er val in minutes. The range is 0-35 79 1. seconds Specifie ...

  • Brocade Communications Systems 53-1001762-01 - page 33

    Converged Enhanced Ethernet Command Reference 15 53-1001762-01 exit 2 DRAFT: BROCADE CONFIDENTIAL exit Exits the current mode and returns t o the previous mo de. Synopsis exit Operands none Defaults There are no def ault configurations for this command. Command Modes All command modes Description Use this command t o exit the current mode, and re t ...

  • Brocade Communications Systems 53-1001762-01 - page 34

    16 Converged Enhanced Ethernet Command Reference 53-1001762-01 fos 2 DRAFT: BROCADE CONFIDENTIAL fos Execut es Fabric OS c ommands from the from the cmsh shell. Synopsis fos command Operands command Specifies the Fabric OS command . Defaults There are no def ault configurations for this command. Command Modes Privileged EXEC mode Description Use th ...

  • Brocade Communications Systems 53-1001762-01 - page 35

    Converged Enhanced Ethernet Command Reference 17 53-1001762-01 fos 2 DRAFT: BROCADE CONFIDENTIAL suppor tsa ve switchshow zoneshow Usage Guidelines The Fabric OS syntax applie s t o the listed commands. The fcoelogincfg , fcoelogingr oup , and fcoelogincfg commands are not suppor t ed from cmsh shell. See the Fabric OS Command Refe ren ce fo r a dd ...

  • Brocade Communications Systems 53-1001762-01 - page 36

    18 Converged Enhanced Ethernet Command Reference 53-1001762-01 line co nsole 2 DRAFT: BROCADE CONFIDENTIAL line console Configures the Line configuration mode. Synopsis l ine console 0 Operands none Defaults There are no def ault configurations for this command. Command Modes Global configuration mode Description Use this command t o configure the ...

  • Brocade Communications Systems 53-1001762-01 - page 37

    Converged Enhanced Ethernet Command Reference 19 53-1001762-01 line vty 2 DRAFT: BROCADE CONFIDENTIAL line vty Configures the vir tual terminal line setting t o allo w you to set the wait time inter v al f or the T elnet session to time out. Synopsis line vty first number last number Operands first number Specifies the first line number . The range ...

  • Brocade Communications Systems 53-1001762-01 - page 38

    20 Converged Enhanced Ethernet Command Reference 53-1001762-01 pwd 2 DRAFT: BROCADE CONFIDENTIAL pwd Print Working Directory ( pwd ); displa ys the contents of the current w orking director y . Synopsis pwd Operands none Defaults There are no def ault configurations for this command. Command Modes Privileged EXEC mode Description Use this command t ...

  • Brocade Communications Systems 53-1001762-01 - page 39

    Converged Enhanced Ethernet Command Reference 21 53-1001762-01 rename 2 DRAFT: BROCADE CONFIDENTIAL rename Renames a file in the Flash. Synopsis rename sourcefile renamedfile Operands sourcefile Specifies the file name to change. renamedfile Specifies the new name of the file. Defaults There are no def ault configurations for this command. Command ...

  • Brocade Communications Systems 53-1001762-01 - page 40

    22 Converged Enhanced Ethernet Command Reference 53-1001762-01 show calendar 2 DRAFT: BROCADE CONFIDENTIAL show calendar View the current date and time based on the switch har dware clock. Synopsis s how calendar Operands none Defaults There are no def ault configurations for this command. Command Modes Privileged EXEC mode Description Use this com ...

  • Brocade Communications Systems 53-1001762-01 - page 41

    Converged Enhanced Ethernet Command Reference 23 53-1001762-01 show clock 2 DRAFT: BROCADE CONFIDENTIAL show clock Displays the time and dat e from the syst em clock. Synopsis show clock Operands none Defaults There are no def ault configurations for this command. Command Modes Privileged EXEC mode Description Use this command t o display the time ...

  • Brocade Communications Systems 53-1001762-01 - page 42

    24 Converged Enhanced Ethernet Command Reference 53-1001762-01 show environment 2 DRAFT: BROCADE CONFIDENTIAL show environment Displays f an, temperature, red undant power syst em (RPS) availability , and power inf ormation for the switch. Synopsis show en vironment Operands none Defaults There are no def ault configurations for this command. Comma ...

  • Brocade Communications Systems 53-1001762-01 - page 43

    Converged Enhanced Ethernet Command Reference 25 53-1001762-01 show file 2 DRAFT: BROCADE CONFIDENTIAL show file Displays the cont ents of a te xt file in the local Flash. Synopsis show file file _name Operands file_name Specifies the file whose contents are to be display ed. Defaults There are no def ault configurations for this command. Command M ...

  • Brocade Communications Systems 53-1001762-01 - page 44

    26 Converged Enhanced Ethernet Command Reference 53-1001762-01 show line 2 DRAFT: BROCADE CONFIDENTIAL show line Displays line paramet ers. Synopsis show l ine [ first line number | last line number ] Operands first line nu mber Specifies the first line number . The range of valid values is 0-3 1. last line nu mber Specifies the last line number . ...

  • Brocade Communications Systems 53-1001762-01 - page 45

    Converged Enhanced Ethernet Command Reference 27 53-1001762-01 show logging 2 DRAFT: BROCADE CONFIDENTIAL show logging Displays the int ernal syslog buf fer of the switch. Synopsis show lo gging Operands none Defaults There are no def ault configurations for this command. Command Modes Privileged EXEC mode Description Use this command t o display t ...

  • Brocade Communications Systems 53-1001762-01 - page 46

    28 Converged Enhanced Ethernet Command Reference 53-1001762-01 show media 2 DRAFT: BROCADE CONFIDENTIAL show media Displays the SFP inf ormation for all the inter f aces present on a switch. Synopsis show media Operands none Defaults There are no def ault configurations for this command. Command Modes Privileged EXEC mode Description Use this comma ...

  • Brocade Communications Systems 53-1001762-01 - page 47

    Converged Enhanced Ethernet Command Reference 29 53-1001762-01 show media interface 2 DRAFT: BROCADE CONFIDENTIAL show media interface Displays the SFP inf ormation for a specific interface. Synopsis show media inter f ace Operands tengigabitethernet Specifies a valid 10 Gbps Ethernet inter face. slot Specifies a valid slot numb er . por t Specifie ...

  • Brocade Communications Systems 53-1001762-01 - page 48

    30 Converged Enhanced Ethernet Command Reference 53-1001762-01 show media linecard 2 DRAFT: BROCADE CONFIDENTIAL show media linecard Displays the SFP inf ormation for all the interfaces of a specific line card. Synopsis show media linecar d nu mber Operands number Linecard numb er . Defaults There are no def ault configurations for this command. Co ...

  • Brocade Communications Systems 53-1001762-01 - page 49

    Converged Enhanced Ethernet Command Reference 31 53-1001762-01 show processes cpu 2 DRAFT: BROCADE CONFIDENTIAL show processes cpu Displays inf ormation about t h e active processe s in the switch and their corr esponding CPU utilization statistics. Synopsis show processes cpu summar y Operands summar y Shows a summary of CPU usage by all processes ...

  • Brocade Communications Systems 53-1001762-01 - page 50

    32 Converged Enhanced Ethernet Command Reference 53-1001762-01 show processes memory 2 DRAFT: BROCADE CONFIDENTIAL show processes memory Displays the memory usage information ba sed on pr ocesses runn ing in the syst em. Synopsis show pr ocesses memor y summar y Operands summar y Shows a summary of memor y usage b y all processes. Defaults There ar ...

  • Brocade Communications Systems 53-1001762-01 - page 51

    Converged Enhanced Ethernet Command Reference 33 53-1001762-01 show running-config 2 DRAFT: BROCADE CONFIDENTIAL show running-config Displays the cont ents of the conf iguratio n file currently running on the system. Synopsis show runn ing-config [ access-list | cee-map | interface | lldp | rmon | spanning-tree ] Operands access-list Displays the r ...

  • Brocade Communications Systems 53-1001762-01 - page 52

    34 Converged Enhanced Ethernet Command Reference 53-1001762-01 show startup-config 2 DRAFT: BROCADE CONFIDENTIAL show startup-config Displays the cont ent of the star tup configuration f ile. Synopsis show star tup-config Operands none Defaults There are no def ault configurations for this command. Command Modes Privileged EXEC mode Description Use ...

  • Brocade Communications Systems 53-1001762-01 - page 53

    Converged Enhanced Ethernet Command Reference 35 53-1001762-01 show system 2 DRAFT: BROCADE CONFIDENTIAL show system Displays syst em information. Synopsis show system Operands none Defaults There are no def ault configurations for this command. Command Modes Privileged EXEC mode Description Use this command t o display syst em inform ation of hard ...

  • Brocade Communications Systems 53-1001762-01 - page 54

    36 Converged Enhanced Ethernet Command Reference 53-1001762-01 show tech-support 2 DRAFT: BROCADE CONFIDENTIAL show tech-support Displays output f or troubleshooting. Synopsis show tech-suppor t Operands none Defaults There are no def ault configurations for this command. Command Modes Privileged EXEC mode Description Use this command to run a scri ...

  • Brocade Communications Systems 53-1001762-01 - page 55

    Converged Enhanced Ethernet Command Reference 37 53-1001762-01 show users 2 DRAFT: BROCADE CONFIDENTIAL show users Displays inf ormation on all user s currently logged int o the switch. Synopsis show users Operands none Defaults There are no def ault configurations for this command. Command Modes Privileged EXEC mode Description Use this command to ...

  • Brocade Communications Systems 53-1001762-01 - page 56

    38 Converged Enhanced Ethernet Command Reference 53-1001762-01 show version 2 DRAFT: BROCADE CONFIDENTIAL show version Displays v ersion information f or the hardware and software. Synopsis show version Operands none Defaults There are no def ault configurations for this command. Command Modes Privileged EXEC mode Description Use this command t o d ...

  • Brocade Communications Systems 53-1001762-01 - page 57

    Converged Enhanced Ethernet Command Reference 39 53-1001762-01 terminal length 2 DRAFT: BROCADE CONFIDENTIAL terminal length Sets the number of lines t o display on a sc reen. Synopsis te rminal length number Operands number Specifies the number of lines t o display on a screen. The range of v alid values is 0-5 1 2. Defaults The default length is ...

  • Brocade Communications Systems 53-1001762-01 - page 58

    40 Converged Enhanced Ethernet Command Reference 53-1001762-01 terminal monitor 2 DRAFT: BROCADE CONFIDENTIAL terminal monitor Displays the RASlog and debug outputs on a terminal. Synopsis t erminal monitor ter mi na l n o m oni tor Operands none Defaults Th e term inal mon itor o pti on is dis able d. Command Modes Privileged EXEC mode Description ...

  • Brocade Communications Systems 53-1001762-01 - page 59

    Converged Enhanced Ethernet Command Reference 41 53-1001762-01 write erase 2 DRAFT: BROCADE CONFIDENTIAL write erase Remo ves the star tup configuration from the switch. Synopsis write erase Operands none Defaults There are no def ault configurations for this command. Command Modes Privileged EXEC mode Description Use this command to remo ve a star ...

  • Brocade Communications Systems 53-1001762-01 - page 60

    42 Converged Enhanced Ethernet Command Reference 53-1001762-01 write memory 2 DRAFT: BROCADE CONFIDENTIAL write memory Copies the current running configuration to the star tup configuration file. Synopsis write memor y Operands none Defaults There are no def ault configurations for this command. Command Modes Privileged EXEC mode Description Use th ...

  • Brocade Communications Systems 53-1001762-01 - page 61

    Converged Enhanced Ethernet Command Reference 43 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 3 VLAN Commands fcf forward Enables Fibre Channel over Et hernet (FCoE) on a VLAN int er face. Synopsis fcf forward no fcf forward Operands none Defaults FCF f or war ding is disabled. Command Modes Inter face VLAN mode Description Use this command to ...

  • Brocade Communications Systems 53-1001762-01 - page 62

    44 Converged Enhanced Ethernet Command Reference 53-1001762-01 interface vlan 3 DRAFT: BROCADE CONFIDENTIAL interface vlan Configures a VLAN inter face. Synopsis inter f a ce vlan vlan_id no interface vlan vlan_id Operands vlan_id Specifies the VLAN int er face t o configure. The range of valid values is 1-3583. Defaults VLAN 1 is predefined on the ...

  • Brocade Communications Systems 53-1001762-01 - page 63

    Converged Enhanced Ethernet Command Reference 45 53-1001762-01 show interface 3 DRAFT: BROCADE CONFIDENTIAL show interface Displays the configuration and status of an int er face. Synopsis show interface [ tengigabitethernet slot/por t | por t-channel number | switchpor t ] Operands tengigabitethernet Specifies a valid 10 Gbps Ethernet inter face. ...

  • Brocade Communications Systems 53-1001762-01 - page 64

    46 Converged Enhanced Ethernet Command Reference 53-1001762-01 show vlan 3 DRAFT: BROCADE CONFIDENTIAL show vlan Displays inf ormation about a specif ic VLA N int er face. Synopsis show vlan { vlan_id | brief | classifier | fcoe } Operands vlan_id Specifies the VLAN int er face to display . The range of valid v alues is 1-3583. brief Specifies to d ...

  • Brocade Communications Systems 53-1001762-01 - page 65

    Converged Enhanced Ethernet Command Reference 47 53-1001762-01 show vlan classifier 3 DRAFT: BROCADE CONFIDENTIAL show vlan classifier Displays inf ormation about a specif ic V LAN classifier group. Synopsis show vlan classifier [ gr oup number | inter face group number | port-channel number | rule number | tengigabitethernet slot/por t | vlan vlan ...

  • Brocade Communications Systems 53-1001762-01 - page 66

    48 Converged Enhanced Ethernet Command Reference 53-1001762-01 switchport 3 DRAFT: BROCADE CONFIDENTIAL switchport Puts the int er face to Layer 2 mo de and sets the swit ching charact eristics of the Layer 2 int er face to the defaults. Synopsis switchpor t no switchpor t Operands none Defaults By default, all La yer 2 int er faces are mapped t o ...

  • Brocade Communications Systems 53-1001762-01 - page 67

    Converged Enhanced Ethernet Command Reference 49 53-1001762-01 switchport access 3 DRAFT: BROCADE CONFIDENTIAL switchport access Sets the Lay er 2 inter f ace as access. Synopsis switchpor t access vlan vlan_id no switchpor t access vlan Operands vlan vlan _id Sets th e por t VLAN (PVID) to the specified vlan_id . The range of valid v alues is 1-35 ...

  • Brocade Communications Systems 53-1001762-01 - page 68

    50 Converged Enhanced Ethernet Command Reference 53-1001762-01 switchport converged 3 DRAFT: BROCADE CONFIDENTIAL switchport converged Adds or remo ves native and tagged VLANs on a La yer 2 interface. Synopsis switchpor t converged { vlan vlan_id | allow ed vlan { add vlan_id | all | exc ept vlan_id | none | remov e vlan_id } } no switchpor t con v ...

  • Brocade Communications Systems 53-1001762-01 - page 69

    Converged Enhanced Ethernet Command Reference 51 53-1001762-01 switchport mode 3 DRAFT: BROCADE CONFIDENTIAL switchport mode Sets the mode of the La yer 2 inter f ace. Synopsis switchpor t mode { access | trunk | converged } Operands access Sets the Lay er 2 inter f ace as access. trunk Sets the Lay er 2 inter face as trunk. con verged Sets the lay ...

  • Brocade Communications Systems 53-1001762-01 - page 70

    52 Converged Enhanced Ethernet Command Reference 53-1001762-01 switchport trunk 3 DRAFT: BROCADE CONFIDENTIAL switchport trunk Adds or remo ves tagged VLANs on a La yer 2 int er face. Synopsis switchpor t trunk allowed v lan { add vlan_id | all | exce pt vlan_id | none | remov e vlan_id } no switchpor t trunk Operands allowed vlan Sets the VLANs t ...

  • Brocade Communications Systems 53-1001762-01 - page 71

    Converged Enhanced Ethernet Command Reference 53 53-1001762-01 vlan classifier activate group 3 DRAFT: BROCADE CONFIDENTIAL vlan classifier activate group Activat es a VLAN classifier group. Synopsis vlan classifi er activate gr oup number vlan vlan_id no vlan clas sifier activat e group Operands number Specifies which VLAN classifier group t o act ...

  • Brocade Communications Systems 53-1001762-01 - page 72

    54 Converged Enhanced Ethernet Command Reference 53-1001762-01 vlan classifier group 3 DRAFT: BROCADE CONFIDENTIAL vlan classifier group Adds and delet es rules to a VLAN classifier group. Synopsis vlan classifier group number [ add rule number | dele te rule number ] no vlan classifier group Operands number Specifies the VLAN group number for wh i ...

  • Brocade Communications Systems 53-1001762-01 - page 73

    Converged Enhanced Ethernet Command Reference 55 53-1001762-01 vlan classifier rule 3 DRAFT: BROCADE CONFIDENTIAL vlan classifier rule Creates a VLAN classifier rule. Synopsis vlan cl assifier rule ru le_id [ mac mac_address ] [ pr oto | arp | fc oe | fip ] [ encap ethv2 | nosnapllc | snapllc ] no vlan classifier rule Operands rule_id Specifies the ...

  • Brocade Communications Systems 53-1001762-01 - page 74

    56 Converged Enhanced Ethernet Command Reference 53-1001762-01 vlan classifier rule 3 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1001762-01 - page 75

    Converged Enhanced Ethernet Command Reference 57 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 4 Interface Commands clear counters Clears s tatistics on all inter faces on the switch. Synopsis clear counters {all | access-list mac access_lis t_name | [ inter face port-ch annel number | tengigabitethernet slot/po rt | slot-id number ] } Operands ...

  • Brocade Communications Systems 53-1001762-01 - page 76

    58 Converged Enhanced Ethernet Command Reference 53-1001762-01 clear counters 4 DRAFT: BROCADE CONFIDENTIAL See Also show inter faces ...

  • Brocade Communications Systems 53-1001762-01 - page 77

    Converged Enhanced Ethernet Command Reference 59 53-1001762-01 description 4 DRAFT: BROCADE CONFIDENTIAL description Specifies a string that contains the description of the in t er face. Synopsis description li ne no description Operands line Specifies characters describing the interface. The maximum num ber of charact ers is 64. Defaults There are ...

  • Brocade Communications Systems 53-1001762-01 - page 78

    60 Converged Enhanced Ethernet Command Reference 53-1001762-01 interface 4 DRAFT: BROCADE CONFIDENTIAL interface Enters the int er face configuratio n mode to configure an interface. Synopsis inter f a ce [ port-channel number | tengigabitethernet slot/port | vlan vlan id ] no interface [ por t-channel number | vlan vlan id ] Operands tengigabiteth ...

  • Brocade Communications Systems 53-1001762-01 - page 79

    Converged Enhanced Ethernet Command Reference 61 53-1001762-01 mtu 4 DRAFT: BROCADE CONFIDENTIAL mtu Specifies the MTU on the interface. Synopsis mtu size Operands size Specifies the size of the maximum transmission unit (MTU) of an int er face. The allow ed MTU size is 1522-9208 b ytes. Defaults By default, all 1 0 Gbps Ethernet int er faces use a ...

  • Brocade Communications Systems 53-1001762-01 - page 80

    62 Converged Enhanced Ethernet Command Reference 53-1001762-01 show interface 4 DRAFT: BROCADE CONFIDENTIAL show interface Synopsis show interface [ por t-channel number | tengigab itethernet slot/port | switchport ] Operands por t-channel number S pecifies to display the por t-channel number . The range of valid values is 1-63. tengigabitethernet ...

  • Brocade Communications Systems 53-1001762-01 - page 81

    Converged Enhanced Ethernet Command Reference 63 53-1001762-01 show interface 4 DRAFT: BROCADE CONFIDENTIAL Time since last interface status change: 00:02:17 T o display La yer 2 information f or all inter faces: switch# show interface switchport Interface name : TenGigabitEthernet 0/8 Switchport mode : access Ingress filter : enable Acceptable fra ...

  • Brocade Communications Systems 53-1001762-01 - page 82

    64 Converged Enhanced Ethernet Command Reference 53-1001762-01 show ip interface 4 DRAFT: BROCADE CONFIDENTIAL show ip interface Displays the IP inter fac e status and configurat ion of all inter faces or a specified inter face. Synopsis show ip inter f a c e { br ief | port-channel number brief | tengigabitethernet slot/por t brief | vlan vlan_id ...

  • Brocade Communications Systems 53-1001762-01 - page 83

    Converged Enhanced Ethernet Command Reference 65 53-1001762-01 show ip interface 4 DRAFT: BROCADE CONFIDENTIAL TenGigabitEthernet 0/13 unassigned up up TenGigabitEthernet 0/14 unassigned up down TenGigabitEthernet 0/15 unassigned up up TenGigabitEthernet 0/16 unassigned up down TenGigabitEthernet 0/17 unassigned up up TenGigabitEthernet 0/18 unassi ...

  • Brocade Communications Systems 53-1001762-01 - page 84

    66 Converged Enhanced Ethernet Command Reference 53-1001762-01 shutdown 4 DRAFT: BROCADE CONFIDENTIAL shutdown Disables the select ed inter f ace. Synopsis shutdown no shutdown Operands none Defaults The interface is disabled. Command Modes Interface configuration mode Description Use this command t o disable an inter f ace. Usage Guidelines There ...

  • Brocade Communications Systems 53-1001762-01 - page 85

    Converged Enhanced Ethernet Command Reference 67 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 5 Link Layer Discovery Protocol Commands advertise dcbx-fcoe-app-tlv Advertises application T ype, Length, V alues (TL Vs) to ensure inter operability of traf fic o ver the Data Center Bridging eXc hange prot ocol (DCBX), which runs ov er LLDP to nego ...

  • Brocade Communications Systems 53-1001762-01 - page 86

    68 Converged Enhanced Ethernet Command Reference 53-1001762-01 advertise dcbx-fcoe-logical-lin k-tlv 5 DRAFT: BROCADE CONFIDENTIAL advertise dcbx-fcoe-logical-link-tlv Advertises to an y attached device th e FCo E status of the logical link. Synopsis adver tise dcbx-fcoe-logical-link -tlv no advertise dcbx-fcoe-logical-link-tlv Operands none Defaul ...

  • Brocade Communications Systems 53-1001762-01 - page 87

    Converged Enhanced Ethernet Command Reference 69 53-1001762-01 advertise dcbx-tlv 5 DRAFT: BROCADE CONFIDENTIAL advertise dcbx-tlv Advertises to an y attached device mandat or y Data Center Bridging eXchange prot ocol (DCBX) T ype, Length, V alues (TL Vs). Synopsis adver tise dcbx-tlv no advertis e dcbx -tlv Operands none Defaults Adv er tise is en ...

  • Brocade Communications Systems 53-1001762-01 - page 88

    70 Converged Enhanced Ethernet Command Reference 53-1001762-01 advertise dot1-tlv 5 DRAFT: BROCADE CONFIDENTIAL advertise dot1-tlv Adv er tises to an y attached device I EEE 802.1 orga nizationally specific T ype, Length, V alue (TL V). Synopsis adver tise dot1-tlv no advertis e do t1-tlv Operands none Defaults Adv er tise is disabled. Command Mode ...

  • Brocade Communications Systems 53-1001762-01 - page 89

    Converged Enhanced Ethernet Command Reference 71 53-1001762-01 advertise dot3-tlv 5 DRAFT: BROCADE CONFIDENTIAL advertise dot3-tlv Advertises to an y attached device IEEE 802. 3 organizationally specific T ype, Length, Value ( TL V). Synopsis adver tise dot3-tlv no advertis e do t3-tlv Operands none Defaults Adv er tise is disabled. Command Modes P ...

  • Brocade Communications Systems 53-1001762-01 - page 90

    72 Converged Enhanced Ethernet Command Reference 53-1001762-01 advertise optional-tlv 5 DRAFT: BROCADE CONFIDENTIAL advertise optional-tlv Adv er tises the optional T ype, Length, and Value (TL V)s. Synopsis adver tise optional-tlv [ management-address | port-description | system-capabilities | system-description | system-name ] no advertise option ...

  • Brocade Communications Systems 53-1001762-01 - page 91

    Converged Enhanced Ethernet Command Reference 73 53-1001762-01 clear lldp neighbors 5 DRAFT: BROCADE CONFIDENTIAL clear lldp neighbors Clears t he Link Lay er Disco ver y Prot oc ol (LLDP) ne ighbor information on all or specified inter f aces. Synopsis clear lldp neighbor s int er face [ tengigabitethernet slot/port ] Operands interface Use this k ...

  • Brocade Communications Systems 53-1001762-01 - page 92

    74 Converged Enhanced Ethernet Command Reference 53-1001762-01 clear lldp statistics 5 DRAFT: BROCADE CONFIDENTIAL clear lldp statistics Clears LLDP statistics for all inte rfaces or a specified inter f ace. Synopsis clear lldp st atistics inter f ace [ tengigabitethernet slot/por t ] Operands interface Use this k eywor d to specify the 1 0 Gbps Et ...

  • Brocade Communications Systems 53-1001762-01 - page 93

    Converged Enhanced Ethernet Command Reference 75 53-1001762-01 debug lldp packet 5 DRAFT: BROCADE CONFIDENTIAL debug lldp packet Enables debugging for Link Laye r Discov er y Prot oc ol (LLDP). Synopsis debug lldp packet { all | int er face tengigabitethernet slot/port } [ both | detail [ bo th | rx | tx ] | rx | tx ] no debug lldp packe t { all | ...

  • Brocade Communications Systems 53-1001762-01 - page 94

    76 Converged Enhanced Ethernet Command Reference 53-1001762-01 description 5 DRAFT: BROCADE CONFIDENTIAL description Specifies a string that contains the description of the LLDP . Synopsis description li ne no description Operands line Characte rs describin g the LLDP pro tocol. Defaults There are no def ault configurations for this command. Comman ...

  • Brocade Communications Systems 53-1001762-01 - page 95

    Converged Enhanced Ethernet Command Reference 77 53-1001762-01 hello 5 DRAFT: BROCADE CONFIDENTIAL hello Sets the Hello transmit interval. Synopsis hello seconds no hello Operands seconds Sets the Hello transmit int er val. The ra nge of valid values is 4-180 seconds. Defaults The default is 30 seconds. Command Modes Pro tocol LLDP configuration mo ...

  • Brocade Communications Systems 53-1001762-01 - page 96

    78 Converged Enhanced Ethernet Command Reference 53-1001762-01 lldp dcbx-version 5 DRAFT: BROCADE CONFIDENTIAL lldp dcbx-version Specifies which version of the Data Center Bridging Exchange (DCBX) protocol t o use. Synopsis lldp dcbx-version [ auto | cee | pre-cee ] Operands auto Specifies to aut o adjust the DCBX pro tocol version t o accommodate ...

  • Brocade Communications Systems 53-1001762-01 - page 97

    Converged Enhanced Ethernet Command Reference 79 53-1001762-01 lldp disable 5 DRAFT: BROCADE CONFIDENTIAL lldp disable Disables LLDP on the inte r face. Synopsis lldp disable no lldp disable Operands none Defaults By default, LLDP is enabled at both the global and interface levels. Command Modes Interface configuration mode Description Use this com ...

  • Brocade Communications Systems 53-1001762-01 - page 98

    80 Converged Enhanced Ethernet Command Reference 53-1001762-01 lldp fcoe-priority-bits 5 DRAFT: BROCADE CONFIDENTIAL lldp fcoe-priority-bits Sets the priorities on which FCoE traffic will be allowed. Synopsis lldp fcoe-priority-bits value no lldp fcoe-priority-bits Operands val ue Specifies the bitmap value. The range of valid v alues is 0x0-0xf f. ...

  • Brocade Communications Systems 53-1001762-01 - page 99

    Converged Enhanced Ethernet Command Reference 81 53-1001762-01 lldp profile 5 DRAFT: BROCADE CONFIDENTIAL lldp profile Applies a Link Layer Di scovery Prot ocol (LLDP) pr ofile on an int er face. Synopsis lldp profile name no lldp profile Operands name Specifies the profile name. Defaults If the paramet ers are not defined in th e pr ofile, the def ...

  • Brocade Communications Systems 53-1001762-01 - page 100

    82 Converged Enhanced Ethernet Command Reference 53-1001762-01 mode 5 DRAFT: BROCADE CONFIDENTIAL mode Sets the LLDP mode on the switch. Synopsis mode tx | rx no mode Operands tx Specifies to enable only the transmit mode. rx Specifies to enable o nly the receive mode. Defaults Both transmit and rece ive modes are e nabled. Command Modes Pro tocol ...

  • Brocade Communications Systems 53-1001762-01 - page 101

    Converged Enhanced Ethernet Command Reference 83 53-1001762-01 multiplier 5 DRAFT: BROCADE CONFIDENTIAL multiplier Sets the number of consecutiv e misses of hello messages bef ore LLDP declares the neighbor as dead. Synopsis multiplier value no multiplier Operands val ue Specifies a multiplier value t o use. The range of valid v alues is 1-10. Defa ...

  • Brocade Communications Systems 53-1001762-01 - page 102

    84 Converged Enhanced Ethernet Command Reference 53-1001762-01 profile 5 DRAFT: BROCADE CONFIDENTIAL profile Creates an LLD P profile. Synopsis profile name no profile name Operands name Assigns a name to th e profile. The vali d value is a maximum of 32 characters. Defaults none Command Modes Pro tocol LLDP configuration mode Description Use this ...

  • Brocade Communications Systems 53-1001762-01 - page 103

    Converged Enhanced Ethernet Command Reference 85 53-1001762-01 protocol lldp 5 DRAFT: BROCADE CONFIDENTIAL protocol lldp Enters the Link La yer Discov er y Pro tocol (LLDP) configuration mode. Synopsis protocol lldp no prot oc ol lldp Operands none Defaults The LLDP and DCBX pr otocols are enabled. Command Modes Global configuration mode Descriptio ...

  • Brocade Communications Systems 53-1001762-01 - page 104

    86 Converged Enhanced Ethernet Command Reference 53-1001762-01 show debug lldp 5 DRAFT: BROCADE CONFIDENTIAL show debug lldp Displays the LLDP debugging status on the switch. Synopsis show debug lldp Operands none Defaults There are no def ault configurations for this command. Command Modes EXEC mode Description Use this command t o display the LLD ...

  • Brocade Communications Systems 53-1001762-01 - page 105

    Converged Enhanced Ethernet Command Reference 87 53-1001762-01 show lldp interface 5 DRAFT: BROCADE CONFIDENTIAL show lldp interface Displays the LLDP status on the specified inter f ace. Synopsis show lldp interface [ tengigabitethernet slot/por t ] Operands tengigabit ethernet Specifies a valid 1 0 Gb ps Ethernet int er face. slot Specifies a val ...

  • Brocade Communications Systems 53-1001762-01 - page 106

    88 Converged Enhanced Ethernet Command Reference 53-1001762-01 show lldp neighbors 5 DRAFT: BROCADE CONFIDENTIAL show lldp neighbors Displays LLDP inf ormation for all neighb oring de vices on the specified interface. Synopsis show lldp neighbors [ inter face teng iga bitet her net slot/por t detail ] Operands interface Use this k eyword t o specif ...

  • Brocade Communications Systems 53-1001762-01 - page 107

    Converged Enhanced Ethernet Command Reference 89 53-1001762-01 show lldp neighbors 5 DRAFT: BROCADE CONFIDENTIAL Link Aggregation Status: Disabled Port Vlan Id: 1 Port & Protocol Vlan Flag: Supported Not enabled Port & Protocol Vlan Id: 0 Link Aggregation Port Id: 0 Max Frame Size: 2500 Management Address: 10.32.152.21 (IPv4) Interface Numb ...

  • Brocade Communications Systems 53-1001762-01 - page 108

    90 Converged Enhanced Ethernet Command Reference 53-1001762-01 show lldp statistics 5 DRAFT: BROCADE CONFIDENTIAL show lldp statistics Displays the LLDP statistics o n all inter f aces or a specified interface. Synopsis show lldp statistics [ inter f ace tengigabitethernet slot/por t ] Operands interface Use this k eywor d to specify the 1 0 Gbps E ...

  • Brocade Communications Systems 53-1001762-01 - page 109

    Converged Enhanced Ethernet Command Reference 91 53-1001762-01 system-description LINE 5 DRAFT: BROCADE CONFIDENTIAL system-description LINE Sets the global syst em descr iption specific t o LLDP . Synopsis system-description line no system-description Operands line Specifies a description f or the LLDP system. The valid value is a maximum of 50 ch ...

  • Brocade Communications Systems 53-1001762-01 - page 110

    92 Converged Enhanced Ethernet Command Reference 53-1001762-01 system-name 5 DRAFT: BROCADE CONFIDENTIAL system-name Sets the global syst em name specific to LLDP . Synopsis system-name name Operands name Specifies a system name for the LLDP . The valid value s is a maximum of32 charact ers. Defaults By default, the host name fr om the switch is us ...

  • Brocade Communications Systems 53-1001762-01 - page 111

    Converged Enhanced Ethernet Command Reference 93 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 6 Link Aggregation Control Protocol Commands channel-group Enables Li nk A ggreg ation on an int er face. Synopsis channel-group number mode [ act ive | passi ve | on ] [ type sta nda rd | b roc ade ] no channel-group Operands number Specifies a Link ...

  • Brocade Communications Systems 53-1001762-01 - page 112

    94 Converged Enhanced Ethernet Command Reference 53-1001762-01 channel-group 6 DRAFT: BROCADE CONFIDENTIAL switch(conf-if)# channel-group 4 mode active See Also inter f ace por t-channel ...

  • Brocade Communications Systems 53-1001762-01 - page 113

    Converged Enhanced Ethernet Command Reference 95 53-1001762-01 clear lacp 6 DRAFT: BROCADE CONFIDENTIAL clear lacp Clears the L ink Aggregation Group Control Prot ocol (LACP) counters on a specific po rt-chann el. Synopsis clear lacp number counters Operands number Specifies the por t channel-gr oup number . The range of valid values is 1-63 . coun ...

  • Brocade Communications Systems 53-1001762-01 - page 114

    96 Converged Enhanced Ethernet Command Reference 53-1001762-01 clear lacp coun ters 6 DRAFT: BROCADE CONFIDENTIAL clear lacp counters Clears the L ink Aggregation Group Control Prot ocol (LACP) counters on all por t-channels. Synopsis clear lacp counters Operands none Defaults There are no def ault configurations for this command. Command Modes Pri ...

  • Brocade Communications Systems 53-1001762-01 - page 115

    Converged Enhanced Ethernet Command Reference 97 53-1001762-01 debug lacp 6 DRAFT: BROCADE CONFIDENTIAL debug lacp Enables debugging for the Link Aggr egation Control Pro tocol (LACP). Synopsis debug lacp { all | cli | even t | nsm | pdu { rx { al l | interface tengigabitethernet slot/por t } | tx { all | inter f a ce teng igab itet her net slot/p ...

  • Brocade Communications Systems 53-1001762-01 - page 116

    98 Converged Enhanced Ethernet Command Reference 53-1001762-01 debug lacp 6 DRAFT: BROCADE CONFIDENTIAL Examples T o enable debugging of LACP PDUs for transm itted and received packe ts on all inter faces: switch# debug lacp pdu tx all switch# debug lacp pdu rx all switch# show debug lacp LACP rx debugging is on LACP tx debugging is on See Also sho ...

  • Brocade Communications Systems 53-1001762-01 - page 117

    Converged Enhanced Ethernet Command Reference 99 53-1001762-01 lacp system-priority 6 DRAFT: BROCADE CONFIDENTIAL lacp system - priority Sets the Link Aggregation Contr ol Prot ocol (LA CP) system priority . Synopsis lacp syst em-priority value no lacp syst em-priority Operands val ue Specifies the value of the LA CP system priority . The range o f ...

  • Brocade Communications Systems 53-1001762-01 - page 118

    100 Converged Enhanced Ethernet Command Reference 53-1001762-01 lacp timeou t 6 DRAFT: BROCADE CONFIDENTIAL lacp timeout Sets the timeout value used by LA CP to exchange pack ets on an interface. Synopsis lacp timeout [ long | shor t ] no lacp timeout Operands timeout Specifies the number of seconds bef ore in validating a received Link Aggregation ...

  • Brocade Communications Systems 53-1001762-01 - page 119

    Converged Enhanced Ethernet Command Reference 101 53-1001762-01 show lacp counter 6 DRAFT: BROCADE CONFIDENTIAL show lacp counter Displays the Li nk A ggregatio n Control Pr otocol (LA C P) counters on all por t-channels or a specified interface. Synopsis show lacp count er number Operands number Specifies the por t-channel number t o di splay . Th ...

  • Brocade Communications Systems 53-1001762-01 - page 120

    102 Converged Enhanced Ethernet Command Reference 53-1001762-01 show lacp-sys-id 6 DRAFT: BROCADE CONFIDENTIAL show lacp-sys-id Displays the Li nk A ggregatio n Control Pr otocol (LA CP) system ID an d priority information. Synopsis show lacp sys-id Operands none Defaults There are no def ault configurations for this command. Command Modes EXEC mod ...

  • Brocade Communications Systems 53-1001762-01 - page 121

    Converged Enhanced Ethernet Command Reference 103 53-1001762-01 show port-channel 6 DRAFT: BROCADE CONFIDENTIAL show port-channel Displays the Link Aggregation Gr oup (LAG) inf ormation for a por t-channel. Synopsis show por t-channel [ channel-group-number | detail | load-balance | summar y ] Operands cha nnel- grou p num ber Specifies a LAG port ...

  • Brocade Communications Systems 53-1001762-01 - page 122

    104 Converged Enhanced Ethernet Command Reference 53-1001762-01 show port-channel 6 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1001762-01 - page 123

    Converged Enhanced Ethernet Command Reference 105 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 7 Layer 2 System Commands mac-address-table Use this command t o set the aging time or t o add static addresses t o the MAC address table. Synopsis mac-address-table { aging-time seconds | static mac-addr for war d [ por t-channel number | tengigabit ...

  • Brocade Communications Systems 53-1001762-01 - page 124

    106 Converged Enhanced Ethernet Command Reference 53-1001762-01 mac-address-table 7 DRAFT: BROCADE CONFIDENTIAL T o set the aging time t o 10 minut es: switch(config)# mac-address-table aging-time 600 See Also show mac address-table static ...

  • Brocade Communications Systems 53-1001762-01 - page 125

    Converged Enhanced Ethernet Command Reference 107 53-1001762-01 show mac-address-table 7 DRAFT: BROCADE CONFIDENTIAL show mac-address-table Displays a specific MAC address table static and dynamic entr y or the MA C address table static and dynamic entries f or a specific interface or VLAN. Synopsis show mac-address-table [ address mac-addr | aging ...

  • Brocade Communications Systems 53-1001762-01 - page 126

    108 Converged Enhanced Ethernet Command Reference 53-1001762-01 show mac-address-table 7 DRAFT: BROCADE CONFIDENTIAL VlanId Mac-address Type State Ports 100 0011.2222.3333 Static Inactive Te 0/1 Total MAC addresses : 1 T o display the aging time for a specific MA C address table: switch# show mac-address-table aging-time MAC Aging-time : 300 second ...

  • Brocade Communications Systems 53-1001762-01 - page 127

    Converged Enhanced Ethernet Command Reference 109 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 8 Layer 2 ACL commands clear counters access-list mac Clears all the Media Acce ss C o nt rol (M AC) ACL co un te rs for al l i nt er f ac es wh ic h h ave ACL ap pl ie d on them or for a specific int er face. Synopsis clear counters access-list mac ...

  • Brocade Communications Systems 53-1001762-01 - page 128

    110 Converged Enhanced Ethernet Command Reference 53-1001762-01 deny (extended ACLs) 8 DRAFT: BROCADE CONFIDENTIAL deny (extended ACLs) Configures a MAC address rule t o drop traffic ba sed on the source and destination MA C addresses. Synopsis deny { an y | host MA C _ACL | MA C_ACL } { any | host MA C _ACL| MA C _A CL } [ EtherT ype | arp | fcoe ...

  • Brocade Communications Systems 53-1001762-01 - page 129

    Converged Enhanced Ethernet Command Reference 111 53-1001762-01 deny (extended ACLs) 8 DRAFT: BROCADE CONFIDENTIAL switch(conf-macl-ext)# no deny 0022.3333.4444 0022.3333.5555 ipv4 See Also mac-access-list extended , mac-access-list stan dard , permit ...

  • Brocade Communications Systems 53-1001762-01 - page 130

    112 Converged Enhanced Ethernet Command Reference 53-1001762-01 deny (standard ACLs) 8 DRAFT: BROCADE CONFIDENTIAL deny (standard ACLs) Configures a MA C address rule to drop traffic based on the sour ce MAC address. Synopsis deny { MA C_ACL | an y } [ count ] no deny { MA C_A CL | any } Operands MA C_ACL Specifies the sour ce host MA C address f o ...

  • Brocade Communications Systems 53-1001762-01 - page 131

    Converged Enhanced Ethernet Command Reference 113 53-1001762-01 mac access -list extended 8 DRAFT: BROCADE CONFIDENTIAL mac access-list extended Creates and assigns a name to the extended MA C access list. Synopsis mac access-list extended name no mac access-list ext ended name Operands name Assigns a name to th e MAC e xtended access list. The max ...

  • Brocade Communications Systems 53-1001762-01 - page 132

    114 Converged Enhanced Ethernet Command Reference 53-1001762-01 mac access-l ist standard 8 DRAFT: BROCADE CONFIDENTIAL mac access-list standard Creates and assigns a name to t he standar d MAC access list. Synopsis mac access-list standard name no mac access-list standard name Operands name Assigns a name to th e MAC standar d access list. The max ...

  • Brocade Communications Systems 53-1001762-01 - page 133

    Converged Enhanced Ethernet Command Reference 115 53-1001762-01 mac access-gro up 8 DRAFT: BROCADE CONFIDENTIAL mac access-group Applies rules specified in a MA C ACL to tr af fi c e nte rin g a n in ter fac e. Synopsis mac access-group name in no mac access-group name Operands name Specifies the name of the standard or ext ended MAC access list. i ...

  • Brocade Communications Systems 53-1001762-01 - page 134

    116 Converged Enhanced Ethernet Command Reference 53-1001762-01 permit (extended ACLs) 8 DRAFT: BROCADE CONFIDENTIAL permit (extended ACLs) Configures a MA C address rule to permit traf fic based on the source and destination MA C addresses. Synopsis permit { any | host MA C _ACL | MAC_A CL } { any | host MA C _ACL| MA C _ACL } [ EtherT ype | arp | ...

  • Brocade Communications Systems 53-1001762-01 - page 135

    Converged Enhanced Ethernet Command Reference 117 53-1001762-01 permit (extended ACLs) 8 DRAFT: BROCADE CONFIDENTIAL T o delete a filt er rule in a MAC e xtended A CL: switch(conf-macl-ext)# no permit 0022.3333.4444 0022.3333.5555 ipv4 See Also mac-access-list extended , mac-access-list stan dard , no seq ...

  • Brocade Communications Systems 53-1001762-01 - page 136

    118 Converged Enhanced Ethernet Command Reference 53-1001762-01 permit (standard ACLs) 8 DRAFT: BROCADE CONFIDENTIAL permit (standard ACLs) Configures a MA C address rule to permit traffic based on the source MAC address. Synopsis permit { MAC_A CL | any } [ count ] no permit { MAC_A CL | any } Operands MA C_ACL Specifies the source host MA C a ddr ...

  • Brocade Communications Systems 53-1001762-01 - page 137

    Converged Enhanced Ethernet Command Reference 119 53-1001762-01 resequence access-list mac 8 DRAFT: BROCADE CONFIDENTIAL resequence access-list mac Specifies the renumbering of the rules in a MAC A CL. Synopsis resequence access-list mac { name | seq_num | increment } Operands name Specifies the name of a standard or an ext ended MAC A CL. seq_num ...

  • Brocade Communications Systems 53-1001762-01 - page 138

    120 Converged Enhanced Ethernet Command Reference 53-1001762-01 seq (extended MAC ACLs) 8 DRAFT: BROCADE CONFIDENTIAL seq (extended MAC ACLs) Inser ts a rule anywhere in the MA C A CL. Synopsis seq va lue { deny | permit } { any | host MAC _A CL | MA C_ACL } { an y | host MAC _A CL| MAC _A CL } [ EtherT ype | arp | fcoe | ipv4 ] [ count ] no seq va ...

  • Brocade Communications Systems 53-1001762-01 - page 139

    Converged Enhanced Ethernet Command Reference 121 53-1001762-01 seq (extended MAC ACLs) 8 DRAFT: BROCADE CONFIDENTIAL Example T o cre at e a rule i n a MA C extended ACL t o perm it or dr op IPv4 traffic fr om the sour ce M A C addres s 0022.3333.4444 to the destinatio n MAC ad dress 0022.3333.5555 and to enable the co unting of pack et s: switch(c ...

  • Brocade Communications Systems 53-1001762-01 - page 140

    122 Converged Enhanced Ethernet Command Reference 53-1001762-01 seq (standard MAC ACLs) 8 DRAFT: BROCADE CONFIDENTIAL seq (standard MAC ACLs) Inser ts a rule anywhere in the MA C A CL. Synopsis seq va lue { deny | permit } { any | host MAC _A CL | MA C_ACL } [ count ] no seq valu e Operands val ue Specifies the seq uence number for the rule. T he r ...

  • Brocade Communications Systems 53-1001762-01 - page 141

    Converged Enhanced Ethernet Command Reference 123 53-1001762-01 show mac access-gro up 8 DRAFT: BROCADE CONFIDENTIAL show mac access-group Displays the current MAC A CL mapping to int er faces. Synopsis show mac access-gr oup [ i nt erf ac e p ort - ch an n e l numbe r | tengigabitethernet slot/port | vlan vlan_id ] Operands inter f ace Specifies t ...

  • Brocade Communications Systems 53-1001762-01 - page 142

    124 Converged Enhanced Ethernet Command Reference 53-1001762-01 show statistics access-list mac 8 DRAFT: BROCADE CONFIDENTIAL show statistics access-list mac Shows activ e ACL rules in the switch and if the rules hav e counters enabled. Synopsis show statistics access-list mac name [ in t e rfa c e p ort - ch an n el number | tengigabitethernet slo ...

  • Brocade Communications Systems 53-1001762-01 - page 143

    Converged Enhanced Ethernet Command Reference 125 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 9 Spanning Tree Protocol Commands bridge-priority Specifies the priority of the bridge. Synopsis bridge-priorit y priority no bridge-priority Operands priority Specifies the bridge priority . The range of valid values is 0-6 1 440. Defaults The defau ...

  • Brocade Communications Systems 53-1001762-01 - page 144

    126 Converged Enhanced Ethernet Command Reference 53-1001762-01 cisco-interoperability 9 DRAFT: BROCADE CONFIDENTIAL cisco-intero perability Configures the switch to int eroperat e with some legacy Cisco switches. Synopsis cisco-interoperability [ disable | enable ] Operands disable Disables Cisco inter operability for the Mu ltip le Spanning T ree ...

  • Brocade Communications Systems 53-1001762-01 - page 145

    Converged Enhanced Ethernet Command Reference 127 53-1001762-01 clear spanning-tree counter 9 DRAFT: BROCADE CONFIDENTIAL clear spanning-tree counter Clears all spanning-tree counters on the int er face. Synopsis clear span ning-tree count er [ inter f ace | por t-channel number | t engi gabit ethern et slot/port ] Operands interface Specifies the ...

  • Brocade Communications Systems 53-1001762-01 - page 146

    128 Converged Enhanced Ethernet Command Reference 53-1001762-01 debug spanning-tree 9 DRAFT: BROCADE CONFIDENTIAL debug spanning-tree Enables debugging for the Spanning T ree Prot ocol. Synopsis debug spanning-tree { all | bpdu { rx | tx { all | interface por t-channel number | t engigabitethernet slot/port } } no debug spanning-tre e { all | bpdu ...

  • Brocade Communications Systems 53-1001762-01 - page 147

    Converged Enhanced Ethernet Command Reference 129 53-1001762-01 error-disable-timeout enable 9 DRAFT: BROCADE CONFIDENTIAL error-disable-timeout enable Enables the timer to bring the inter f ace out of the error -disabled state. Synopsis error-disable-timeout enable Operands none Defaults There are no def ault configurations for this command. Comma ...

  • Brocade Communications Systems 53-1001762-01 - page 148

    130 Converged Enhanced Ethernet Command Reference 53-1001762-01 error-disable-timeout interval 9 DRAFT: BROCADE CONFIDENTIAL error-disable-timeout interval Synopsis error-disable-timeout int er val seconds Operands seconds Specifies the range of time in seconds fo r the int er face to time out. The range of valid values is 1 0-1 000000. Defaults Th ...

  • Brocade Communications Systems 53-1001762-01 - page 149

    Converged Enhanced Ethernet Command Reference 131 53-1001762-01 forward-delay 9 DRAFT: BROCADE CONFIDENTIAL forward-delay Specifies the time an int er face spends in each of the list ening and learning states. Synopsis forward-dela y seco nds no f or war d-delay Operands seconds Specifies the range of time in seconds that an int er face spends in t ...

  • Brocade Communications Systems 53-1001762-01 - page 150

    132 Converged Enhanced Ethernet Command Reference 53-1001762-01 hello-time 9 DRAFT: BROCADE CONFIDENTIAL hello-time Sets the interval between the hello Bridge Prot ocol Data Units (BPDUs) sent on an interface. Synopsis hello-time seconds no hello-time Operands seconds Specifies the time range in se conds f o r the inter v al between the hello BPDUs ...

  • Brocade Communications Systems 53-1001762-01 - page 151

    Converged Enhanced Ethernet Command Reference 133 53-1001762-01 instance 9 DRAFT: BROCADE CONFIDENTIAL instance Maps a VLAN to a Multiple Spanni ng T ree Pr otocol (M STP) instance. Synopsis instance instance_id [ vlan vlan_id | priority priority_id ] no instance Operands instance_id Specifies the MS TP instance. The range of valid v alues is 1-15. ...

  • Brocade Communications Systems 53-1001762-01 - page 152

    134 Converged Enhanced Ethernet Command Reference 53-1001762-01 max-age 9 DRAFT: BROCADE CONFIDENTIAL max-age Sets the interval time in seconds between messa ges that the spanning tree receiv es from the interface. Synopsis max-age seconds no max-age Operands seconds Configures the Spanning tree Prot ocol inter f ace maximum-age. The range of valid ...

  • Brocade Communications Systems 53-1001762-01 - page 153

    Converged Enhanced Ethernet Command Reference 135 53-1001762-01 max-hops 9 DRAFT: BROCADE CONFIDENTIAL max-hops Configures the maximum number of hops f or a Br idge Prot ocol Data Unit (BPDU) in an MS TP region. Synopsis max-hops hop _count no max-hops Operands hop_count Specifies t he maximum number of hops for which the BPDU will be valid. The ra ...

  • Brocade Communications Systems 53-1001762-01 - page 154

    136 Converged Enhanced Ethernet Command Reference 53-1001762-01 port-channel path-cost 9 DRAFT: BROCADE CONFIDENTIAL port-channel path-cost Sets the path-cost behavior . Synopsis por t-channel path-cost c ustom | st andard Operands cust om Specifies to use the custom beha vior , which sets the path-cost changes according t o the por t-channel’s b ...

  • Brocade Communications Systems 53-1001762-01 - page 155

    Converged Enhanced Ethernet Command Reference 137 53-1001762-01 protocol sp anning-tree 9 DRAFT: BROCADE CONFIDENTIAL protocol spanning-tree Synopsis prot ocol spanning-tree [ mstp | rs tp | stp ] no prot oco l spanning-tree Operands mstp Specifies the Multiple Spanning T ree Protocol (MS TP). rstp Specifies the Rapid Spanning T ree (RS TP). stp Sp ...

  • Brocade Communications Systems 53-1001762-01 - page 156

    138 Converged Enhanced Ethernet Command Reference 53-1001762-01 region 9 DRAFT: BROCADE CONFIDENTIAL region Specifies the Multiple Spanning T ree Protocol (MS TP) region. Synopsis region region-name no region Operands region-name Assigns a name to an MSTP region. Defaults There are no def ault configurations for this command. Command Modes Pro toco ...

  • Brocade Communications Systems 53-1001762-01 - page 157

    Converged Enhanced Ethernet Command Reference 139 53-1001762-01 revision 9 DRAFT: BROCADE CONFIDENTIAL revision Assigns a version number to the Multiple Sp anning T ree Pro tocol (MSTP) configuration. Synopsis revision numbe r no revision Operands number Specifies the revision or version numb er of the MS TP region. The range of valid v alues is 0- ...

  • Brocade Communications Systems 53-1001762-01 - page 158

    140 Converged Enhanced Ethernet Command Reference 53-1001762-01 show spanning-tree 9 DRAFT: BROCADE CONFIDENTIAL show spanning-tree Displays all Spanning T ree P r otocol information. Synopsis show spanning-tree Operands none Defaults There are no def ault configurations for this command. Command Modes EXEC mode Description Use this command to disp ...

  • Brocade Communications Systems 53-1001762-01 - page 159

    Converged Enhanced Ethernet Command Reference 141 53-1001762-01 show spanning-t ree 9 DRAFT: BROCADE CONFIDENTIAL Designated Port Id: 0; CIST Priority: 128 Designated Bridge: 0000.0000.0000.0000 CIST Port Hello Time: 2 Number of forward-transitions: 0 Version Multiple Spanning Tree Protocol - Received None - Send MSTP Edgeport: off; AutoEdge: no; A ...

  • Brocade Communications Systems 53-1001762-01 - page 160

    142 Converged Enhanced Ethernet Command Reference 53-1001762-01 show spanning-tree brief 9 DRAFT: BROCADE CONFIDENTIAL show spanning-tree brief Displays the status and paramet ers of the Spanning T ree Prot ocol. Synopsis show spanning-tre e brief Operands none Defaults There are no def ault configurations for this command. Command Modes EXEC mode ...

  • Brocade Communications Systems 53-1001762-01 - page 161

    Converged Enhanced Ethernet Command Reference 143 53-1001762-01 show spanning-tree interface 9 DRAFT: BROCADE CONFIDENTIAL show spanning-tree interface Displays the stat e of the Spanning T ree Prot ocol f or all named por t-channels or 1 0 Gbps Ethernet interfaces. Synopsis show spanning-tree i nt er face [ port-channel number | t engigabitetherne ...

  • Brocade Communications Systems 53-1001762-01 - page 162

    144 Converged Enhanced Ethernet Command Reference 53-1001762-01 show spanning-tree mst brief 9 DRAFT: BROCADE CONFIDENTIAL show spanning-tree mst brief Displays the status and paramet ers of the Mult iple Spanning T ree Protocol (MSTP) instance information in brief. Synopsis show spanning-tr ee mst brief Operands none Defaults There are no def ault ...

  • Brocade Communications Systems 53-1001762-01 - page 163

    Converged Enhanced Ethernet Command Reference 145 53-1001762-01 show spanning-tree ms t detail 9 DRAFT: BROCADE CONFIDENTIAL show spanning-tree mst detail Displays details on an inter face f or the Multiple Spanning T ree Pro tocol (MSTP) instance running. Synopsis show spanning-tr ee mst detail [ i nt e rf ac e po rt- ch a nn el number | inter fac ...

  • Brocade Communications Systems 53-1001762-01 - page 164

    146 Converged Enhanced Ethernet Command Reference 53-1001762-01 show spanning-tree mst detail 9 DRAFT: BROCADE CONFIDENTIAL Designated Bridge: 0000.0000.0000.0000 CIST Port Hello Time: 2 Number of forward-transitions: 0 Version Multiple Spanning Tree Protocol - Received None - Send MSTP Edgeport: off; AutoEdge: no; AdminEdge: no; EdgeDelay: 3 sec C ...

  • Brocade Communications Systems 53-1001762-01 - page 165

    Converged Enhanced Ethernet Command Reference 147 53-1001762-01 show spanning-tree ms t detail 9 DRAFT: BROCADE CONFIDENTIAL Link-type: point-to-point Received BPDUs: 0; Sent BPDUs: 0 MSTI details. ============== See Also show spa nning-tree mst inter f ace , show spanning-tree mst instance ...

  • Brocade Communications Systems 53-1001762-01 - page 166

    148 Converged Enhanced Ethernet Command Reference 53-1001762-01 show spanning-tree mst instance 9 DRAFT: BROCADE CONFIDENTIAL show spanning-tree mst instance Displays inf ormation on a specified Multiple Spanning T ree Prot ocol (MSTP) instance. Synopsis show spanning-tre e mst instance i nstance_id [ interface por t-channel number | interface teng ...

  • Brocade Communications Systems 53-1001762-01 - page 167

    Converged Enhanced Ethernet Command Reference 149 53-1001762-01 show spanning-tree mst interface 9 DRAFT: BROCADE CONFIDENTIAL show spanning-tree mst interface Displays inf ormation for a specified interface for a Multiple Spanning T ree Prot ocol (MSTP) instance. Synopsis show spanning-tre e mst interface [ por t-channel number | tengigabitetherne ...

  • Brocade Communications Systems 53-1001762-01 - page 168

    150 Converged Enhanced Ethernet Command Reference 53-1001762-01 shutdown 9 DRAFT: BROCADE CONFIDENTIAL shutdown Disables the Multiple Spanning T r ee Pr otocol (MS TP), Rapid Spanning T ree (RSTP), or the Spanning T ree Prot ocol (STP) globally . Synopsis shutdown no shutdown Operands none Defaults STP is no t required in a loop-free t opology and ...

  • Brocade Communications Systems 53-1001762-01 - page 169

    Converged Enhanced Ethernet Command Reference 151 53-1001762-01 spanning-tree autoedge 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree autoedge Enables automatic edge de tection. Synopsis spanning-tree autoedge no spanning-tree autoedge Operands none Defaults Aut o detection is not enabled. Command Modes Interface configuration mode Description Use thi ...

  • Brocade Communications Systems 53-1001762-01 - page 170

    152 Converged Enhanced Ethernet Command Reference 53-1001762-01 spanning-tree cost 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree cost Changes an interface's spanning-tree por t path cost. .Synopsis spanning-tree cost cos t Operands cost S pecifies th e path cost fo r the Spanning T ree Prot ocol (STP) calculations. The range of valid values is 1 ...

  • Brocade Communications Systems 53-1001762-01 - page 171

    Converged Enhanced Ethernet Command Reference 153 53-1001762-01 spanning-tree edgeport 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree edgeport Enables the edge por t on an interface to allo w the inte r face to quic kly tran siti on to the fo rwa rdin g state. Synopsis spanning-tree e dgepor t [ bpdu-filt er | bpdu-guar d ] Operands bpdu-filter Sets t ...

  • Brocade Communications Systems 53-1001762-01 - page 172

    154 Converged Enhanced Ethernet Command Reference 53-1001762-01 spanning-tree guard root 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree guard root Enables the guard r oot to restrict which inte r face is allow ed to be the spanning-tree r oot por t or the path-to-the r oot for the switch. Synopsis spanning-tree guard root no spanning-tree guard r oot ...

  • Brocade Communications Systems 53-1001762-01 - page 173

    Converged Enhanced Ethernet Command Reference 155 53-1001762-01 spanning-tree hello-time 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree hello-time Configures the hello-time in seconds on the int er face. Synopsis spanning-tree hel lo-time seconds no spanning-tree hello-time Operands seconds Sets the interval between the hello Bridge Prot ocol Data Uni ...

  • Brocade Communications Systems 53-1001762-01 - page 174

    156 Converged Enhanced Ethernet Command Reference 53-1001762-01 spanning-tree instance 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree instance Sets restrictions f or the por t of particular MSTP instance . Synopsis spanning-tree i nstance instance _id [ cost cost | priority priority| restrict ed-role | restrict ed-tcn ] no spanning-tree instance insta ...

  • Brocade Communications Systems 53-1001762-01 - page 175

    Converged Enhanced Ethernet Command Reference 157 53-1001762-01 spanning-tree link-type 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree link-type Enables and disables the rapid transi tion f or the Spanning T ree Protocol. Synopsis spanning-tree l ink-type [ point-t o-point | shared ] no spanning-tree link-type Operands point-to-point Enables rapid tra ...

  • Brocade Communications Systems 53-1001762-01 - page 176

    158 Converged Enhanced Ethernet Command Reference 53-1001762-01 spanning-tree portfast 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree portfast Enables the Por t F ast f eatu re on an int er face t o allow the interface to quickly transition to forwarding stat e. Synopsis spanning-tree po r tfast [ bpdu-filter | bpdu-guar d ] Operands bpdu-filter Sets ...

  • Brocade Communications Systems 53-1001762-01 - page 177

    Converged Enhanced Ethernet Command Reference 159 53-1001762-01 spanning-tree priority 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree priority Changes an interface's spa nning-tree por t priority . Synopsis spanning-tree pri ority priority no spanning-tree priority priority Operands priority Specifies the interface priority f or the spanning tree ...

  • Brocade Communications Systems 53-1001762-01 - page 178

    160 Converged Enhanced Ethernet Command Reference 53-1001762-01 spanning-tree re stricted-role 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree restricted-role Restricts the role of the por t from becoming a root port. Synopsis spanning-tree restricted-role no spanning-tree restricted-r ole Operands none Defaults The restricte d role is disabled. Comman ...

  • Brocade Communications Systems 53-1001762-01 - page 179

    Converged Enhanced Ethernet Command Reference 161 53-1001762-01 spanning-tree restricted-tcn 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree restricted-tcn Restricts the topology change notification Bridge Pro tocol Data Units (BPDUs) se nt on the por t. Synopsis spanning-tree restricted-tcn no spanning-tree restricted-tc n Operands none Defaults The r ...

  • Brocade Communications Systems 53-1001762-01 - page 180

    162 Converged Enhanced Ethernet Command Reference 53-1001762-01 spanning-tree shutdown 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree shutdown Enables or disables spanni ng tree on the int er face. Synopsis spanning-tree shutdown no spanning-tree shutdown Operands none Defaults Spanning tree is not enabled. Command Modes Interface configuration mode D ...

  • Brocade Communications Systems 53-1001762-01 - page 181

    Converged Enhanced Ethernet Command Reference 163 53-1001762-01 spanning-tree tc-flush-standard 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree tc-flush-standard Flushes the Media Access Control (MA C) address based on the optimal scheme. Synopsis spanning-tree tc-flush-standard no spanning-tree tc-flush-standard Operands none Defaults MA C address flu ...

  • Brocade Communications Systems 53-1001762-01 - page 182

    164 Converged Enhanced Ethernet Command Reference 53-1001762-01 transmit-holdcount 9 DRAFT: BROCADE CONFIDENTIAL transmit-holdcoun t Configures the maximum number o f Bridge Protocol Data Units (BPDUs) transmitted per second f or the Multiple Spann ing T ree Protocol (MS TP) and the Rapid Spanning T ree Pr otocol RS TP . Synopsis transm it-holdcoun ...

  • Brocade Communications Systems 53-1001762-01 - page 183

    Converged Enhanced Ethernet Command Reference 165 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 10 Internet Group Management Protocol Commands clear ip igmp group Clears information rela t ed to learne d gr oups in the IGMP prot ocol m odule. Synopsis clear ip igmp group [ A. B.C. D [ interface tengigabitethernet slot/port | in t erf ac e p o r ...

  • Brocade Communications Systems 53-1001762-01 - page 184

    166 Converged Enhanced Ethernet Command Reference 53-1001762-01 clear ip igmp groups 10 DRAFT: BROCADE CONFIDENTIAL clear ip igmp groups Clears information rela t ed to learne d gr oups in the IGMP prot ocol m odule. Synopsis clear ip igmp groups Operands none Defaults There are no def aults for this command. Command Modes Privileged EXEC mode Desc ...

  • Brocade Communications Systems 53-1001762-01 - page 185

    Converged Enhanced Ethernet Command Reference 167 53-1001762-01 debug ip igmp all 10 DRAFT: BROCADE CONFIDENTIAL debug ip igmp all Displays all IGMP inf ormation. Synopsis debug ip igmp { all | group [ A. B. C.D [ inter face teng iga bitet her net slot/port | inter f ace por t-channel number | interface vlan vlan_id ]]} Operands all Displays all va ...

  • Brocade Communications Systems 53-1001762-01 - page 186

    168 Converged Enhanced Ethernet Command Reference 53-1001762-01 ip igmp last-member-q uery-interval 10 DRAFT: BROCADE CONFIDENTIAL ip igmp last-member-qu ery-interval Sets the last member quer y int er val. Synopsis ip igmp last-member-quer y-interval milliseconds Operands milliseconds Response time in milliseconds . V alid range is 1000 t o 25500 ...

  • Brocade Communications Systems 53-1001762-01 - page 187

    Converged Enhanced Ethernet Command Reference 169 53-1001762-01 ip igmp query-interval 10 DRAFT: BROCADE CONFIDENTIAL ip igmp query-interva l Sets the query inter v al. Synopsis ip igmp quer y-interval second s Operands seconds Response time in seconds. Valid range is 1 t o 18000 seconds. Def ault value is 125 seconds. Description The query interva ...

  • Brocade Communications Systems 53-1001762-01 - page 188

    170 Converged Enhanced Ethernet Command Reference 53-1001762-01 ip igmp query-max-response-tim e 10 DRAFT: BROCADE CONFIDENTIAL ip igmp query-max-response -time Sets the query -max-respo nse-time. Synopsis ip igmp quer y-max-respons e-time seconds Operands seconds Response time in seconds. V alid range is 1 to 25 seconds. Default value is 1 0 secon ...

  • Brocade Communications Systems 53-1001762-01 - page 189

    Converged Enhanced Ethernet Command Reference 171 53-1001762-01 ip igmp snooping enable (global version) 10 DRAFT: BROCADE CONFIDENTIAL ip igmp snooping enable (global version ) Enables the Int ernet Group Management Pr otocol (IGMP) snooping for all VLAN interfaces. Synopsis ip igmp snooping enab le no ip igmp snooping enable Operands none Default ...

  • Brocade Communications Systems 53-1001762-01 - page 190

    172 Converged Enhanced Ethernet Command Reference 53-1001762-01 ip igmp snooping enable (VLAN version) 10 DRAFT: BROCADE CONFIDENTIAL ip igmp snooping enable (V LAN version) Enables the Internet Group Management Pr otocol (IGMP) snooping f or a specific VLAN inter face. Synopsis ip igmp snooping enab le no ip igmp snooping enable Operands none Defa ...

  • Brocade Communications Systems 53-1001762-01 - page 191

    Converged Enhanced Ethernet Command Reference 173 53-1001762-01 ip igmp snooping fast-leave 10 DRAFT: BROCADE CONFIDENTIAL ip igmp snooping fast-l eave Enables snooping fast-leav e. Synopsis ip igmp snooping fast-l ea ve no ip igmp snooping fast-leave Operands none Description IGMP snooping fast-lea ve processing allo ws the re mov al of an inter f ...

  • Brocade Communications Systems 53-1001762-01 - page 192

    174 Converged Enhanced Ethernet Command Reference 53-1001762-01 ip igmp snooping mrouter 10 DRAFT: BROCADE CONFIDENTIAL ip igmp snooping mrouter Configures a VLAN por t member to be a multicast router int er face. Synopsis ip igmp snoopin g mr outer { interface tengigabitethernet slot/port | inter face port-channel number } no ip igmp snooping mrou ...

  • Brocade Communications Systems 53-1001762-01 - page 193

    Converged Enhanced Ethernet Command Reference 175 53-1001762-01 ip igmp snooping mrouter-time out 10 DRAFT: BROCADE CONFIDENTIAL ip igmp snooping mrouter-timeo ut Configures the mrout er-time-out Synopsis ip igmp snoopin g mr outer-timeout seconds Operands seconds Timeout time in seconds. V alid range is 1 to 60000 seconds. De fault value is 300 se ...

  • Brocade Communications Systems 53-1001762-01 - page 194

    176 Converged Enhanced Ethernet Command Reference 53-1001762-01 ip igmp snooping querier enable 10 DRAFT: BROCADE CONFIDENTIAL ip igmp snooping querie r enable Activ ates or deactivat es the IGMP snooping querier functionalit y for the VLAN. Synopsis ip igmp snooping querier en able no ip igmp snooping querier enab le Operands none Defaults This f ...

  • Brocade Communications Systems 53-1001762-01 - page 195

    Converged Enhanced Ethernet Command Reference 177 53-1001762-01 ip igmp static-group 10 DRAFT: BROCADE CONFIDENTIAL ip igmp static-group Configures the static gr oup membership entries. Synopsis ip igmp static-group A.B .C .D { int er face tengigabitethernet slot/por t | interface por t-channel number } no ip igmp static-group A. B.C. D { interface ...

  • Brocade Communications Systems 53-1001762-01 - page 196

    178 Converged Enhanced Ethernet Command Reference 53-1001762-01 show debug ip igmp 10 DRAFT: BROCADE CONFIDENTIAL show debug ip igmp Displays the IGMP pac kets receiv ed and tr ansmitted, as w ell as related ev ents. Synopsis show debug ip igmp Operands none Description This command displa ys the IGMP packets receiv ed and transmitted. Defaults The ...

  • Brocade Communications Systems 53-1001762-01 - page 197

    Converged Enhanced Ethernet Command Reference 179 53-1001762-01 show ip igmp groups 10 DRAFT: BROCADE CONFIDENTIAL show ip igmp groups Displays inf ormation related t o learned groups in the I GMP protoc ol module. Synopsis show ip igmp groups [ A.B .C. D | detail [[ inter face t engigabitetherne t slot/por t | de tail ]|[ inter face por t-channel ...

  • Brocade Communications Systems 53-1001762-01 - page 198

    180 Converged Enhanced Ethernet Command Reference 53-1001762-01 show ip igmp snooping 10 DRAFT: BROCADE CONFIDENTIAL show ip igmp snooping Displays IGMP snooping inf ormation. Synopsis show ip igmp snooping {[ int er face vlan vlan_id | mrou ter i nter fa ce vla n vlan_id | statistics interface vlan vlan_id ]} Operands inter f ace Use this keywor d ...

  • Brocade Communications Systems 53-1001762-01 - page 199

    Converged Enhanced Ethernet Command Reference 181 53-1001762-01 show running-config igmp 10 DRAFT: BROCADE CONFIDENTIAL show running-config igmp Displays the IGMP configuration. Synopsis show running-conf ig igmp Operands none Description This command displays the IGMP contents of the currently running configuration. Note that this information may ...

  • Brocade Communications Systems 53-1001762-01 - page 200

    182 Converged Enhanced Ethernet Command Reference 53-1001762-01 show running-config igmp 10 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1001762-01 - page 201

    Converged Enhanced Ethernet Command Reference 183 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 11 RMON Commands rmon alarm Sets alarm conditions. Synopsis rmon alarm index snmp_oid interval seconds { absolute | delta } rising-threshold valu e even t number [ fall ing -thr esh old value event numbe r [ owne r name ] | own er name ] no rmon alar ...

  • Brocade Communications Systems 53-1001762-01 - page 202

    184 Converged Enhanced Ethernet Command Reference 53-1001762-01 rmon alarm 11 DRAFT: BROCADE CONFIDENTIAL switch(config)# rmon alarm 100 1.3.6.1.2.1.16.1.1.1.5.65535 interval 5 absolute rising-threshold 10000 event 100 falling-threshold 1000 event 101 owner admin See Also rmon event , sho w rmon ...

  • Brocade Communications Systems 53-1001762-01 - page 203

    Converged Enhanced Ethernet Command Reference 185 53-1001762-01 rmon collection stats 11 DRAFT: BROCADE CONFIDENTIAL rmon collection stats Collects Ethernet g r oup st atistics on an interface. Synopsis rmon collection stats number [ own er name ] no rmon collection stats number [ own er name ] Operands number Specifies the RMON collection control ...

  • Brocade Communications Systems 53-1001762-01 - page 204

    186 Converged Enhanced Ethernet Command Reference 53-1001762-01 rmon event 11 DRAFT: BROCADE CONFIDENTIAL rmon event Adds or remo ves an e vent in the RMON ev ent table associated t o th e RMON alarm number . Synopsis rmon ev ent index [ description wo rd ] [ log ] [ own er name ] [ trap wo rd ] no rmon ev ent index [ description wo rd ] [ log ] [ ...

  • Brocade Communications Systems 53-1001762-01 - page 205

    Converged Enhanced Ethernet Command Reference 187 53-1001762-01 show rmon 11 DRAFT: BROCADE CONFIDENTIAL show rmon Displays the current RMON status on the switch. Synopsis show rmon [ alarm s [ number ] [ brief ] | events [ number ] [ br ief ]| logs [event_number ] | stat istics [ number ] [ brief ] ] Operands alarms Specifies to displa y the RMON ...

  • Brocade Communications Systems 53-1001762-01 - page 206

    188 Converged Enhanced Ethernet Command Reference 53-1001762-01 show rmon 11 DRAFT: BROCADE CONFIDENTIAL Owner: RMON_SNMP Status: ok(1) T o display the RMON e vents: switch# show rmon events event Index = 4 Description "My Description" Event type Log & SnmpTrap Event community name admin Last Time Sent = 00:00:00 Owner admin See Also ...

  • Brocade Communications Systems 53-1001762-01 - page 207

    Converged Enhanced Ethernet Command Reference 189 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 12 QoS Commands cee Applies a CEE Pro visioning ma p on an int er face. Synopsis cee name no cee Operands name Specifies the name of a pre vio usly creat ed CEE m ap. An y existing CEE map must be removed bef ore a new one can be applied. Defaults Th ...

  • Brocade Communications Systems 53-1001762-01 - page 208

    190 Converged Enhanced Ethernet Command Reference 53-1001762-01 cee-map 12 DRAFT: BROCADE CONFIDENTIAL cee-map Enters the CEE map configuration mode. If the CEE map does not exist, it creates the map. Synopsis cee-map na me [ precedence number ] no cee-map name Operands name Specifies a unique name acr oss all of the CEE maps defined within the sys ...

  • Brocade Communications Systems 53-1001762-01 - page 209

    Converged Enhanced Ethernet Command Reference 191 53-1001762-01 priority-group-table 12 DRAFT: BROCADE CONFIDENTIAL priority-group-table Configures the bandwidth f or each Priority Group. Synopsis priority-group-table pgid [ wei ght wei ght ] [ pfc ] no priority-group-table pgid Operands pgid Specifies the Priority Group ID (PGID) a ssigned to a pr ...

  • Brocade Communications Systems 53-1001762-01 - page 210

    192 Converged Enhanced Ethernet Command Reference 53-1001762-01 priority-table 12 DRAFT: BROCADE CONFIDENTIAL priority-table Pro visions the CE E P riority-to-Priority Group T able, this table maps each of the eight ingress CoS into a Priority Group. Synopsis priority -table pgid0 pgid1 pgid2 pgid3 pgid4 pgid5 pgid6 p g id7 no priority-table Operan ...

  • Brocade Communications Systems 53-1001762-01 - page 211

    Converged Enhanced Ethernet Command Reference 193 53-1001762-01 priority-table 12 DRAFT: BROCADE CONFIDENTIAL switch(config)# ceemap test switch(conf-ceemap)# priority-table 1 1 0 1 1 1 1 15.0 See Also cee , cee-map , priority -gr oup-table 51 61 71 5 . 0 TA B L E 4 Mapping of incoming Prio rity-to- Priority Groups Priority PGID ...

  • Brocade Communications Systems 53-1001762-01 - page 212

    194 Converged Enhanced Ethernet Command Reference 53-1001762-01 qos cos 12 DRAFT: BROCADE CONFIDENTIAL qos cos Specifies the interface Class of Ser vice (CoS) value. Synopsis qos cos value no qos cos Operands val ue Specifies the CoS value. The range of valid values is 0-7 . Defaults The default CoS v alue is 0 (zero). Command Modes Interface confi ...

  • Brocade Communications Systems 53-1001762-01 - page 213

    Converged Enhanced Ethernet Command Reference 195 53-1001762-01 qos cos-mu tation 12 DRAFT: BROCADE CONFIDENTIAL qos cos-mutation Applies a CoS-t o-CoS (COS) mutati on QoS map on an interface. Synopsis qos cos-mutation name no qos cos-mutation Operands name Specifies the name of the CoS mutation map. Defaults There is no e xplicit CoS-to-CoS mutati ...

  • Brocade Communications Systems 53-1001762-01 - page 214

    196 Converged Enhanced Ethernet Command Reference 53-1001762-01 qos cos-traffic-class 12 DRAFT: BROCADE CONFIDENTIAL qos cos-traffic-class Applies a CoS-t o-T raff ic Class QoS map on an int er face. Synopsis qos cos-traf fic-class name no qos cos-traffic-class Operands name Specifies the name of a previously creat ed CoS-to- T raf fic Class QoS ma ...

  • Brocade Communications Systems 53-1001762-01 - page 215

    Converged Enhanced Ethernet Command Reference 197 53-1001762-01 qos map cos-mutat ion 12 DRAFT: BROCADE CONFIDENTIAL qos map cos-mutation Creates a QoS map f or per f orming CoS-to-CoS mutation. Synopsis qos map cos-mu tation name cos0 cos1 cos2 cos3 cos4 cos5 cos6 cos7 no qos map cos-mutation name Operands name Specifies a unique name acr oss all ...

  • Brocade Communications Systems 53-1001762-01 - page 216

    198 Converged Enhanced Ethernet Command Reference 53-1001762-01 qos map cos-mutation 12 DRAFT: BROCADE CONFIDENTIAL See Also qos cos-mutation , show qos maps ...

  • Brocade Communications Systems 53-1001762-01 - page 217

    Converged Enhanced Ethernet Command Reference 199 53-1001762-01 qos map cos-traffic-class 12 DRAFT: BROCADE CONFIDENTIAL qos map cos-traffic-class Creates a QoS map f or per forming CoS-t o-T raffic Class mapping. Synopsis qos map cos-tr af fic-class name tc0 tc1 tc2 tc3 tc4 tc5 tc6 tc7 no qos map cos-traf fic-class Operands . name Specifies the Co ...

  • Brocade Communications Systems 53-1001762-01 - page 218

    200 Converged Enhanced Ethernet Command Reference 53-1001762-01 qos map cos-traffic-class 12 DRAFT: BROCADE CONFIDENTIAL mTC0_WEIGHTmTC1_WEIGHTmTC2_WEIGHT mT C3_W EIGHT mT C4_WEIG HT mT C5_WEIGHT mTC6_WEIGHT mTC7_WEIGHTmTC0_WEIGHTmTC1_WEIGHTmTC2_WEIGHTmTC3_WEIGHTmTC4_WEIGHTmTC5_ WEIGHTmTC6_WEIGHTmTC7_WEIGHT ...

  • Brocade Communications Systems 53-1001762-01 - page 219

    Converged Enhanced Ethernet Command Reference 201 53-1001762-01 qos queue multicast scheduler 12 DRAFT: BROCADE CONFIDENTIAL qos queue multicast scheduler Configures the multicast T raf fic Class packet e xpa nsion scheduler policy . All m ulticast T raf fic Class pack et expansion queues are ser viced Def icit Weight ed Round Robin (DWRR). Synopsi ...

  • Brocade Communications Systems 53-1001762-01 - page 220

    202 Converged Enhanced Ethernet Command Reference 53-1001762-01 qos queue scheduler 12 DRAFT: BROCADE CONFIDENTIAL qos queue scheduler Configures the T raf fic Clas s packet scheduler policy . Synopsis qos queue scheduler strict-priority stri ct-priority number dwrr weight0 weight1 weight2 w eight3 wei ght4 weigh t5 wei ght6 weigh t7 no qos queue s ...

  • Brocade Communications Systems 53-1001762-01 - page 221

    Converged Enhanced Ethernet Command Reference 203 53-1001762-01 qos queue scheduler 12 DRAFT: BROCADE CONFIDENTIAL wei ght5 Sets the DWRR weight for T raf fic Class 6 in un its of bandwidth per centage lef t ov er af ter servicing all of the Strict Pr iority T raff ic Classes. The sum of all weight v alues must equal 1 00 percent. The weigh t0 valu ...

  • Brocade Communications Systems 53-1001762-01 - page 222

    204 Converged Enhanced Ethernet Command Reference 53-1001762-01 qos rcv-queue multicast rate-limit 12 DRAFT: BROCADE CONFIDENTIAL qos rcv-queue multicast rate-limit Configures a cap on the maxi mum rate f or multicast packe t expansion. Synopsis qos rcv -queue multicast rate-limit rat e [ burst burst-si ze ] no qos rcv- queue multicast rate-limit O ...

  • Brocade Communications Systems 53-1001762-01 - page 223

    Converged Enhanced Ethernet Command Reference 205 53-1001762-01 qos rcv-queue mult icast threshold 12 DRAFT: BROCADE CONFIDENTIAL qos rcv-queue multicast threshold Configures a cap on the maximum queue d ept h for multicast packet e xpansion queues. Synopsis qos rcv-queue multicast threshold tdt0 tdt1 tdt2 tdt3 no qos rcv-queue multicast threshold ...

  • Brocade Communications Systems 53-1001762-01 - page 224

    206 Converged Enhanced Ethernet Command Reference 53-1001762-01 qos trust cos 12 DRAFT: BROCADE CONFIDENTIAL qos trust cos Specifies the inter f ace QoS trust mode for incoming traf fic. Synopsis qos trust cos no qos trust Operands none Defaults The QoS trust CoS mode set to the untrusted stat e. Command Modes Interface configuration mode Descripti ...

  • Brocade Communications Systems 53-1001762-01 - page 225

    Converged Enhanced Ethernet Command Reference 207 53-1001762-01 show cee maps 12 DRAFT: BROCADE CONFIDENTIAL show cee maps Displays inf ormation on the defined CEE maps. Synopsis show cee maps name Operands name Restricts the output t o repor t on only the named CEE map. Defaults The default beha vior without the optional op erand is to repor t on ...

  • Brocade Communications Systems 53-1001762-01 - page 226

    208 Converged Enhanced Ethernet Command Reference 53-1001762-01 show qos flowcontrol interface 12 DRAFT: BROCADE CONFIDENTIAL show qos flowcontrol interface Displays all of the configured flow contr ol information for an int er face. Synopsis show qos flowcontr ol inter face { t engigabit ethernet slo t/por t | linecard slot | por tset chip | all } ...

  • Brocade Communications Systems 53-1001762-01 - page 227

    Converged Enhanced Ethernet Command Reference 209 53-1001762-01 show qos interface 12 DRAFT: BROCADE CONFIDENTIAL show qos interface Displays a summary of all Qo S configurations applied on an interface. Synopsis show qos inter f ace { tengigabit ethernet slot/por t | linecard slot por tset chip | all } Operands tengigabit ethernet Reports QoS co n ...

  • Brocade Communications Systems 53-1001762-01 - page 228

    210 Converged Enhanced Ethernet Command Reference 53-1001762-01 show qos interface 12 DRAFT: BROCADE CONFIDENTIAL Traffic Class Scheduler configured for 0 Strict Priority queues TrafficClass: 0 1 2 3 4 5 6 7 --------------------------------------------- DWRRWeight: 0 0 0 0 60 0 40 0 Multicast Packet Expansion Traffic Class Scheduler TrafficClass: 0 ...

  • Brocade Communications Systems 53-1001762-01 - page 229

    Converged Enhanced Ethernet Command Reference 211 53-1001762-01 show qos maps 12 DRAFT: BROCADE CONFIDENTIAL show qos maps Displays inf ormation on the defined QoS maps. Synopsis show qos maps [{ cos-mutation [ name ] | cos-traffic-class [ name ]} ] Operands cos-mutation name Specifies to repor t on onl y t he named CoS-to-CoS mutation QoS map. cos ...

  • Brocade Communications Systems 53-1001762-01 - page 230

    212 Converged Enhanced Ethernet Command Reference 53-1001762-01 show qos queue interface 12 DRAFT: BROCADE CONFIDENTIAL show qos queue interface Displays the runtime stat e retriev ed from the inte r face reflecting the number of pack ets and b ytes sent and received f or each priority . Synopsis show qos queue interface { tengigabitethernet slot/p ...

  • Brocade Communications Systems 53-1001762-01 - page 231

    Converged Enhanced Ethernet Command Reference 213 53-1001762-01 show qos rcv-queue interface 12 DRAFT: BROCADE CONFIDENTIAL show qos rcv-queue interface Displays a summary of all Qo S configurat ions applied t o a Layer 2 Inter face. Synopsis show qos rcv-queue interface { te ngig abi teth erne t slot/port | all } Operands tengigabit ethernet Speci ...

  • Brocade Communications Systems 53-1001762-01 - page 232

    214 Converged Enhanced Ethernet Command Reference 53-1001762-01 show qos rcv-queue multicas t 12 DRAFT: BROCADE CONFIDENTIAL show qos rcv-queue multicast Displays the runtime stat e retriev ed from the data plane reflecting any multicast pack et expansion pack et drops resulting from a queue crossing the maximum queue de pth. Synopsis show qos rcv- ...

  • Brocade Communications Systems 53-1001762-01 - page 233

    Converged Enhanced Ethernet Command Reference 215 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 13 Port Authentication Commands clear dot1x statistics Clears all dot1x statistics. Synopsis clear do t1x statistics Operands none Defaults There are no def aults for this command. Command Modes Privileged access mode Description Use this command t o ...

  • Brocade Communications Systems 53-1001762-01 - page 234

    216 Converged Enhanced Ethernet Command Reference 53-1001762-01 clear dot1x statistics interface 13 DRAFT: BROCADE CONFIDENTIAL clear dot1x statistics interface Clears th e dot1x statistics for a por t Synopsis clear dot1x st atistics inter f a c e [tengigabitetherne t slot/por t] Operands tengigabitethernet Specifies a valid 10 Gbps Ethernet inter ...

  • Brocade Communications Systems 53-1001762-01 - page 235

    Converged Enhanced Ethernet Command Reference 217 53-1001762-01 dot1x authentication 13 DRAFT: BROCADE CONFIDENTIAL dot1x authentication Enables dot1x on a port. Synopsis dot1x authen tication no dot1x authenti cation Operands none Defaults There are no def aults for this command. Command Modes Interface configuration mode Description Use this comm ...

  • Brocade Communications Systems 53-1001762-01 - page 236

    218 Converged Enhanced Ethernet Command Reference 53-1001762-01 dot1x enable 13 DRAFT: BROCADE CONFIDENTIAL dot1x enable Enables 802. 1X authentication globally . Synopsis dot1x enable no dot1x enable Operands none Defaults By default, authentication is disabled globally . Command Modes Global configuration mode Description Use this command to glob ...

  • Brocade Communications Systems 53-1001762-01 - page 237

    Converged Enhanced Ethernet Command Reference 219 53-1001762-01 dot1x port-control 13 DRAFT: BROCADE CONFIDENTIAL dot1x port-control Contr ols the authorizat ion of a por t stat e. Synopsis dot1x port-control auto | f orce-authorized | fo rce -u na u th or iz ed no dot1x port-control Operands auto Enables authentication on por t. f orced-authorized ...

  • Brocade Communications Systems 53-1001762-01 - page 238

    220 Converged Enhanced Ethernet Command Reference 53-1001762-01 dot1x quiet-period 13 DRAFT: BROCADE CONFIDENTIAL dot1x quiet-period Sets the number of seconds that a switch remains quiet between a failed authentication and an attempt t o retr y authentication. Synopsis dot1x quiet-period inter val seconds no dot1x quiet-period Operands inter v al ...

  • Brocade Communications Systems 53-1001762-01 - page 239

    Converged Enhanced Ethernet Command Reference 221 53-1001762-01 dot1x reauthenticate interface 13 DRAFT: BROCADE CONFIDENTIAL dot1x reauthenticate interface Initiates reauthentication on a specif ied int er face. Synopsis dot1x reauthenticate int er face name Operands name Specifies the name of the inter face. Defaults There are no def aults for th ...

  • Brocade Communications Systems 53-1001762-01 - page 240

    222 Converged Enhanced Ethernet Command Reference 53-1001762-01 dot1x reauthentication 13 DRAFT: BROCADE CONFIDENTIAL dot1x reauthentication Enables reauthentication on a por t. Synopsis dot1x reauthenti cation Operands none Defaults There are no def aults for this command. Command Modes Interface configuration mode Description Use this command t o ...

  • Brocade Communications Systems 53-1001762-01 - page 241

    Converged Enhanced Ethernet Command Reference 223 53-1001762-01 dot1x reauthMax 13 DRAFT: BROCADE CONFIDENTIAL dot1x reauthMax Sets the maximum nu mber of times that a por t attem pts to reauthenticate. Synopsis dot1x reauthMax number no dot1x reauthMax Operands number Specifies the maximum number of reauth entication attempts before the por t goes ...

  • Brocade Communications Systems 53-1001762-01 - page 242

    224 Converged Enhanced Ethernet Command Reference 53-1001762-01 dot1x timeout re-authperiod 13 DRAFT: BROCADE CONFIDENTIAL dot1x timeout re-authperiod Sets the number of seconds between reauthorization atte mpts. Synopsis dot1x timeout re-aut hperiod seconds Operands seconds Specifies the seconds between reauthoriz ation attempts. The range of vali ...

  • Brocade Communications Systems 53-1001762-01 - page 243

    Converged Enhanced Ethernet Command Reference 225 53-1001762-01 dot1x timeout server-timeout 13 DRAFT: BROCADE CONFIDENTIAL dot1x timeout server-timeout Sets the authentication sev er response timeout. Synopsis dot1x timeout server-timeout seconds Operands seconds Specifies the number of seconds that a switch waits f or the transmission of pack ets ...

  • Brocade Communications Systems 53-1001762-01 - page 244

    226 Converged Enhanced Ethernet Command Reference 53-1001762-01 dot1x timeout supp- timeout 13 DRAFT: BROCADE CONFIDENTIAL dot1x timeout supp-timeout Sets the time in seconds that a switch waits f or a res p o nse to an Extensible Authentication Prot ocol (EAP) request frame fr om the clie nt before resending the request. Synopsis dot1x timeout sup ...

  • Brocade Communications Systems 53-1001762-01 - page 245

    Converged Enhanced Ethernet Command Reference 227 53-1001762-01 dot1x time out tx-period 13 DRAFT: BROCADE CONFIDENTIAL dot1x timeout tx-period Sets the number of seconds that the switch waits f or a response to an Ext ensible Authentication Pro tocol (EAP) request or identity frame fr om the client be fore retransmi tting the request. Synopsis dot ...

  • Brocade Communications Systems 53-1001762-01 - page 246

    228 Converged Enhanced Ethernet Command Reference 53-1001762-01 show dot1x 13 DRAFT: BROCADE CONFIDENTIAL show dot1x Displays the o verall state o f dot1x on the system. Synopsis show dot1x Operands none Defaults There are no def aults for this command. Command Modes EXEC mode Description Use this command t o display the o verall state of do t1x on ...

  • Brocade Communications Systems 53-1001762-01 - page 247

    Converged Enhanced Ethernet Command Reference 229 53-1001762-01 show dot1x all 13 DRAFT: BROCADE CONFIDENTIAL show dot1x all Displays detailed inf ormation for all of the por ts. Synopsis show dot1x all Operands none Defaults There are no def aults for this command. Command Modes EXEC mode Description Use this command t o display detailed inf ormat ...

  • Brocade Communications Systems 53-1001762-01 - page 248

    230 Converged Enhanced Ethernet Command Reference 53-1001762-01 show dot1x all 13 DRAFT: BROCADE CONFIDENTIAL See Also none ...

  • Brocade Communications Systems 53-1001762-01 - page 249

    Converged Enhanced Ethernet Command Reference 231 53-1001762-01 show dot1x diagnostics interface 13 DRAFT: BROCADE CONFIDENTIAL show dot1x diagnostics interface Displays all diagnostics inf ormation for the authenticator associat ed with a port. Synopsis show dot1x diagnostics inter f ace name Operands name Specifies the name of the inter face. Def ...

  • Brocade Communications Systems 53-1001762-01 - page 250

    232 Converged Enhanced Ethernet Command Reference 53-1001762-01 show dot1x interface 13 DRAFT: BROCADE CONFIDENTIAL show dot1x interface Displays the state of a specified int er face. Synopsis show dot1x int er face name Operands name Specifies the name of the inter face. Defaults There are no def aults for this command. Command Modes EXEC mode Des ...

  • Brocade Communications Systems 53-1001762-01 - page 251

    Converged Enhanced Ethernet Command Reference 233 53-1001762-01 show dot1x session-info interface 13 DRAFT: BROCADE CONFIDENTIAL show dot1x sessio n-info interface Displays all statistical inf ormat ion of an established session. Synopsis show dot1x session-inf o inter face name Operands name Specifies the name of the inter face. Defaults There are ...

  • Brocade Communications Systems 53-1001762-01 - page 252

    234 Converged Enhanced Ethernet Command Reference 53-1001762-01 show dot1x statistics interface 13 DRAFT: BROCADE CONFIDENTIAL show dot1x statistics interface Displays the statistics of a specified inter f ace. Synopsis show dot1x statistics interface name Operands name Specifies the name of the inter face f or which to display inf ormation. Defaul ...

Fabbricante Brocade Communications Systems Categoria Switch

I documenti che otteniamo dal fabbricante del dispositivoBrocade Communications Systems 53-1001762-01 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Brocade Communications Systems
- manuali per l’uso 53-1001762-01
- schede prodotto Brocade Communications Systems
- opuscoli
- o etichette energetiche Brocade Communications Systems 53-1001762-01
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Brocade Communications Systems 53-1001762-01.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Brocade Communications Systems 53-1001762-01, manuali di manutenzione, brevi manuali o manuali utente Brocade Communications Systems 53-1001762-01. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Brocade Communications Systems 53-1001762-01.

Manuali per l’uso simili

Manuale completo del dispositivo Brocade Communications Systems 53-1001762-01, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Brocade Communications Systems 53-1001762-01 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Brocade Communications Systems 53-1001762-01.

Il manuale per l’uso completo Brocade Communications Systems, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Brocade Communications Systems 53-1001762-01 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Brocade Communications Systems 53-1001762-01, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Brocade Communications Systems 53-1001762-01 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Brocade Communications Systems 53-1001762-01 - che ci dovrebbe aiutare nei primi passi durante l'uso Brocade Communications Systems 53-1001762-01
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Brocade Communications Systems 53-1001762-01
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Brocade Communications Systems 53-1001762-01 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Brocade Communications Systems 53-1001762-01?

Utilizza il modulo sottostante

Se non hai risolto il problema con Brocade Communications Systems 53-1001762-01 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Brocade Communications Systems 53-1001762-01 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)