-
Airlink101 APSUSB211 - page 1
1-Port USB 2.0 Print Server Model # APSUSB211 User’s Manual Ver. 1B ...
-
Airlink101 APSUSB211 - page 2
1 Table of Contents 1 Introduction ............................................................................................... 2 1.1 Package Contents ............................................................................... 2 1.2 System Requirements ......................................................................... 2 2 Hardware Ins ...
-
Airlink101 APSUSB211 - page 3
2 1 Introduction Congratulations on purchasing your 1-Port U SB 2.0 Print Server. It is the easiest and fastest way to deploy printers on your network. This compact Print Server uses your network router to connect various computers and printer together. It manages t he flow of print files from computers to the connected printer, delivering print jo ...
-
Airlink101 APSUSB211 - page 4
3 2 Hardware Inst allation 2.1 Connecting the Print Server Warning: Only a USB printer may be connected to the USB port of the Print Server. Connecting any other USB devic e to the Print Server may damage the Print Server. Do not plug the power cord to the Pr int Server until you have reached Step 4 of this section. Note: Before proceeding with the ...
-
Airlink101 APSUSB211 - page 5
4 3. Inst alling PS Utility Step 1 Insert the provided CD and wait for the autorun screen to appear. Step 2 Click on Install PS Utility . Note: If the autorun screen does not appear automatically, go to Start , Run , type D:autorun.exe (where D is the letter of your CD drive) and click OK . Step 3 Click Next . ...
-
Airlink101 APSUSB211 - page 6
5 Step 4 Click Next . Step 5 Click Yes . Step 6 Click Finish . ...
-
Airlink101 APSUSB211 - page 7
6 4. Configuring Network Setting Before configuring the Print Server’s network setting, please take note of your computer’s TCP/IP setting. Step 1 Click on Start , Run , and type command (for Windows 95/98/ME) or cmd (for Windows 2000/XP) and click OK . Step 2 At the command prompt, type ipconfig and press Enter . Step 3 Write down the informat ...
-
Airlink101 APSUSB211 - page 8
7 Step 6 In the IP Address field, enter a valid IP address, subnet mask, and default gateway that matches your local area network. For example : If your computer’s IP Address is 192.168.1 .100 , enter the same three numbers: 192.168.1 in the corresponding fields. Note: You can leave the last IP Address number 254 as is unless another network devi ...
-
Airlink101 APSUSB211 - page 9
8 5. V erifying Network Connection Step 1 Run the PS Utility by going to Start , (All) Progra ms , PS-Utility , PS-Utility v3.00 . Step 2 Make sure the Print Server is detected under the Device Name . Step 3 Click on Show Web Setup to display the Print Server’s Web Configuration Utility . Step 4 Click on the Printer Information link and make sure ...
-
Airlink101 APSUSB211 - page 10
9 Step 5 Click on the Print Test link and click the Test button. The Print Server will perform a low-level print test, bypa ssing the operating system layer. Note: Your printer should print out a test page. If not, verify that the printer is powered on and all cables are securely connected and tr y again. If the printer still fails to print a test ...
-
Airlink101 APSUSB211 - page 11
10 6. Running PS Wizard Warning: Make sure you have installed the printer driver locally on every computer that will use the print server in your networ k before running the PS Wizard. Otherwise, the PS Wizard will not run properly. Be sure to run the PS Wizard on a ll the computers that will use the print server in your network. Step 1 Insert the ...
-
Airlink101 APSUSB211 - page 12
11 Step 3 Click Next . Step 4 Select the printer that is connec ted to the Print Server and click Next . ...
-
Airlink101 APSUSB211 - page 13
12 Step 5 Double-click on the Print Server Name , select the Printer Port Name , and click Next . Step 6 Click Finish and OK . (For Windows 95/98/ME, you’ll need to reboot the computer). Step 7 Run the PS Wizard on all the computers in your network that will use the Print Server. ...
-
Airlink101 APSUSB211 - page 14
13 7. Performing Operating System Print T est The final step in setting up the Print Server is to perform an operating system print test. Please note that the instructions below are for Windows XP, but the steps are similar for all the other Windows operating systems. Step 1 Click on Start , Settings , Printers and Faxes . Step 2 Right-click on the ...
-
Airlink101 APSUSB211 - page 15
14 Step 3 Click on the Print Test Page button. Windows should print out a test page. You have successfully configured the Print Server for printing. ...
-
Airlink101 APSUSB211 - page 16
15 8. Using the PS Utility PS Utility is a user-friendly program that allows you to configure some basic functions of the Print Server such as performing a factory reset or updating the firmware. To access the complete management features of the Print Server, you’ll need to use the Web Configuration Utility , which is described in the next sectio ...
-
Airlink101 APSUSB211 - page 17
16 9. Using the W eb Configuration Utility The Web Configuration Utility allows you to manage the fu ll features of the Print Server with an easy-to-use user interface. You can start the Web Configuration Utility in two ways: 1. Click on the Show Web Setup button in PS Utility . or 2. Open your web browser, type in the IP address of the Print Serve ...
-
Airlink101 APSUSB211 - page 18
17 9.1 Home The Home page displays the status of your Print Server. Click Refresh to update the page. ...
-
Airlink101 APSUSB211 - page 19
18 9.2 Setup Wizard The Setup Wizard page allows you to configure some basic settings of the Print Server, including specifying an optional password to l og in to the Web Config uration Utility. This page is optional unless you want to se tup a password for the Print Server. Server Name : You can change the Print Server’s name to a more user-frie ...
-
Airlink101 APSUSB211 - page 20
19 IP Address : Select to Manually Assign an IP Address for the Print Server (recommended) or have the router Automatically Assign an IP Address. Click Next to proceed. ...
-
Airlink101 APSUSB211 - page 21
20 Workgroup : Enter the name of your Microsoft Network. Click Next to proceed. ...
-
Airlink101 APSUSB211 - page 22
21 Second HTTP Port : Select to Enable or Disable a second HTTP port for Remote Web Configuration and IPP Printing. Port Number : You may enter the desired port num ber for the second HTTP port. Click Next to proceed. ...
-
Airlink101 APSUSB211 - page 23
22 Click Yes to save the settings, No to cancel the settings. Note : you may need to re-run the PS Wizard to update these changes. ...
-
Airlink101 APSUSB211 - page 24
23 9.3 Change IP Address The Change IP Address page allows you to manually assign an IP Address for the Print Server. The IP Address must be on the same subnet as your network. Click Save to save and activate any configuration changes. Click Cancel to cancel the changes. ...
-
Airlink101 APSUSB211 - page 25
24 9.4 Printer Information The Printer Information page shows the status of your printer. Click Refresh to update the page. ...
-
Airlink101 APSUSB211 - page 26
25 9.5 Print Test The Print Test page allows you to perform a print test. Click on the Test button to begin the print test. Your printer should print out a test page. If not, verify that the printer is powered on and all cables are securely connected and try again. If the printer still fails to print a test page, please check the printer com patibi ...
-
Airlink101 APSUSB211 - page 27
26 9.6 Factory Reset The Factory Reset page allows you to reset the Prin t Server to the default factory settings. Click Yes to reset all the settings to factory default. ...
-
Airlink101 APSUSB211 - page 28
27 9.7 Firmware Upgrade When a new version of the firmware is available on our web site, www.airlink101.com , you can download the new firmware and pr oceed to the followin g page to upgrade the firmware. 1. Click Browse and browse to the location of the downloaded firmware. 2. Click Upgrade to begin the upgrade process. Note: you may need to unzip ...
-
Airlink101 APSUSB211 - page 29
28 9.8 About The About page displays the Print Server’s firmware version number. ...
-
Airlink101 APSUSB211 - page 30
29 10. Printing in Mac OS This section describes how to set up your Ma c OS settings to work with the Print Server. 10.1 Using Rendezvous Mac OS X provides a new feature called Rendezvous . Rendezvous is a networking technology standard that lets you create an instant network of computers and devices to share files and printers and even c ontact ot ...
-
Airlink101 APSUSB211 - page 31
30 Step 2 Select Rendezvous from the pop-up menu. Step 3 A list of Rendezvous-enabled printers will appe ar in the list. ...
-
Airlink101 APSUSB211 - page 32
31 Step 4 Choose the desired printer and select Generic . Step 5 The printer is installed into the system successfully. ...
-
Airlink101 APSUSB211 - page 33
32 1 1. Appendix Technical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Web site: www.airlink101.com Copyright © 2005 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, s pecific product designations, and all other words and logos that are identified as tradem arks and/or service marks are, unless noted ...
Hai una domanda su Airlink101 APSUSB211?
Utilizza il modulo sottostante
Se non hai risolto il problema con Airlink101 APSUSB211 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Airlink101 APSUSB211 è probabile che voglia condividere il modo di risolverlo.