-
BENDIX BIW 1202 - page 1
W ASHING MACHINE BIW 1202 OPERA TING & INST ALLA TION INSTRUCTIONS 132996110 132996110.qxd 16/05/01 15.35 Pagina 1 (Nero/Process Black pellicola) ...
-
BENDIX BIW 1202 - page 2
2 Installation ■ This appliance is heavy . Care should be taken when moving it. ■ It is dangerous to alter the specifications or attempt to modify this product in any way . ■ All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in inst ...
-
BENDIX BIW 1202 - page 3
3 Contents F or the User Important Safety Information 2 Y our New W ashing Machine 4 Description of the Appliance 5 Detergent dispenser drawer 5 The Control Panel 6 Operating sequence 7-10 W ashing 4.5 kg of white cotton at 95°C 7 Load the laundry 7 Measure out the detergent 7 Measure out the fabric softener 7 Select the required option 7 Select t ...
-
BENDIX BIW 1202 - page 4
4 Y our New W ashing Machine Y our new washing machine meets all moder n requir ements for ef fective treatment of laundry with low water , energy and detergent consumption. ■ Automatic cooling of the wash water to 60°C before draining, with the 95°C programme. This reduces thermal shock to fabrics, helping to prevent creasing. ■ The special ...
-
BENDIX BIW 1202 - page 5
5 Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 On/Off Button 4 “MAINS-ON” Light 5 “Option” Buttons 6 Programme Selector Dial 7 Door opening handle 8 Filter 9 Adjustable feet Deter gent dispenser dr a w er Prewash Main wash Fabric softener 9 8 2 4 1 7 5 3 6 95 95 60 40 COTTONS - LINENS Pre-wash & Whites W ...
-
BENDIX BIW 1202 - page 6
1 Pr ogr amme guide 2 MAINS-ON Light This light illuminates when the machine starts working and goes out when the ON/OFF button is released. 3 On/Off Button (MAINS ON) By depressing this button the machine starts operating. When depressed again, the machine stops. 4 HALF LO AD Button Select this button to reduce water consumption on the rinse cycle ...
-
BENDIX BIW 1202 - page 7
7 Operating Sequence Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment of the dispenser drawer and start the machine. W ASHING 4.5 KG OF WHITE COTTON A T 95°C Suppose ...
-
BENDIX BIW 1202 - page 8
8 6. Star t the machine Before starting up the machine check that: ■ the appliance is plugged in ■ the water supply taps are turned on ■ the drain hose is correctly and securely positioned ■ the door and the detergent dispenser drawer are closed. Depress the ON/OFF button: the mains-on light will illuminate and the machine starts operating. ...
-
BENDIX BIW 1202 - page 9
9 W ASHING 2 KG OF MIXED F ABRICS A T 50°C Suppose you have 2 kg of Mixed fabrics to wash. They are rather delicate fabrics and should not be washed at a high temperature. 1. Load the laundr y Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door . ...
-
BENDIX BIW 1202 - page 10
10 7. At the end of the pr ogr amme The machine stops automatically . If you have depressed the RINSE HOLD button, the machine will stop with the water left in the tub, to prevent the fabric from creasing. T o drain the water and spin, release the same button. T o drain only , select programme “ 13 ”. The door is controlled by a safety device w ...
-
BENDIX BIW 1202 - page 11
11 W ashing Hints Do NOT overload the machine. W eigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g T ablecloth 400-500 g Serviette 50-100 g T ea towel 70-120 g Linen hand towel 100-150 g T owelling hand towel 150-2 ...
-
BENDIX BIW 1202 - page 12
12 And in which f orm? Not only are there different types of deter gent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser drawer . Do not sprinkle powder onto clothes in the machine drum. TR ...
-
BENDIX BIW 1202 - page 13
13 W ash Car e Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. W ASHING SYMBOL BLEACHING IRONING DR Y CLEANING TUMBLE DR YING ...
-
BENDIX BIW 1202 - page 14
14 W ashing Pr ogrammes Degree of soil and type of laundry Description W ash programme/ W ashing symbol Programme dial position Possible options Max. load F AST COLOUREDS WHITES For heavy soiled cotton items. Fast coloured cotton or linen fabrics, shirts, underwear , towels. White cotton, for example normally soiled work garments, sheets, household ...
-
BENDIX BIW 1202 - page 15
15 W ashing Pr ogrammes T ype of laundry Description W ash programme/ W ashing symbol Programme dial position MIXED F ABRICS Possible options SHOR T SPIN WOOL W ASH DELICA TES Synthetic or mixed fabrics, underwear , coloured garments, non-shrink shirts, blouses. Specially tested programme for wool garments bearing the “Pure new wool, non- shrink, ...
-
BENDIX BIW 1202 - page 16
16 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply . Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening po ...
-
BENDIX BIW 1202 - page 17
17 Unscrew and remove the filter . Clean carefully under a fast running tap. Wa r n i n g When the appliance is in use and depending on the programme selected there can be hot water in the filter . Never remove the filter during a wash cycle, always wait until the appliance has finished the cycle, and is empty . When replacing the filter , ensure i ...
-
BENDIX BIW 1202 - page 18
18 Something Not W orking Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . Before contacting your local Electrolux Service Force Centre, please carry out the checks listed below . IMPOR T ANT : if you call out an engineer to a fault listed below , or to repair a fault ...
-
BENDIX BIW 1202 - page 19
19 Symptom The door will not open Possible causes ■ The programme is still running. ■ The door lock has not yet released. ■ W ater in the tub: the door cannot be opened if water is present in the tub. Spinning starts late or the machine does not spin ■ The electronic unbalance detection device has cut in because the laundry is not evenly di ...
-
BENDIX BIW 1202 - page 20
20 Guarantee Conditions Standar d guar antee conditions W e, Electrolux undertake that if, within 12 months of the date of the purchase, this Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour , materia ...
-
BENDIX BIW 1202 - page 21
21 To contact your local Ser vice Force Centre telephone 08705 929 929 132996110.qxd 16/05/01 15.35 Pagina 21 (Nero/Process Black pellicola) ...
-
BENDIX BIW 1202 - page 22
22 To contact your local Ser vice Force Centre telephone 08705 929 929 132996110.qxd 16/05/01 15.35 Pagina 22 (Nero/Process Black pellicola) ...
-
BENDIX BIW 1202 - page 23
23 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or co ...
-
BENDIX BIW 1202 - page 24
24 Unpacking All transit bolts and packing must be removed before using the appliance. Y ou are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not squashed. Remove the polystyrene b ...
-
BENDIX BIW 1202 - page 25
25 If only a cold water supply is available, connect the two hoses to a cold water outlet by means of a «Y» connection piece. Installation should comply with local water authority and building regulations’ requirements. The appliance must be given a separate cold water supply and not be connected to a mixer tap, a single outlet water heater or ...
-
BENDIX BIW 1202 - page 26
26 Le v elling Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable. Any necessary adjustment can be made with a spanner . Accurate levelling prevents vibration, noise and displacement of the machine during operation. Some vibratio ...
-
BENDIX BIW 1202 - page 27
27 Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EAR THED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same ...
-
BENDIX BIW 1202 - page 28
Electrolux, 55-77High Str eet, Slough, Berkshire SL1 1DZ Consumer care telephone number 08705 950950 © Electrolux Household Appliances Limited 2001 132996110.qxd 16/05/01 15.35 Pagina 28 (Nero/Process Black pellicola) ...
Hai una domanda su BENDIX BIW 1202?
Utilizza il modulo sottostante
Se non hai risolto il problema con BENDIX BIW 1202 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con BENDIX BIW 1202 è probabile che voglia condividere il modo di risolverlo.