Italiano dropdown-ico

Manuale per l’uso Brother ADS-2100

137 pagine Non applicabile
Scarica

Vai alla pagina of 137

Summary
  • Brother ADS-2100 - page 1

    NETWORK USER’S GUIDE Multi-Protocol On-board Ethernet Print Server and Wireless (IEEE 802.11b/g) Ethernet Print Server HL-2150N HL-2170W Please read this manual thorough ly before using the printer . Keep the CD-ROM in a convenient place so you can use it qu ickly if you need to. Please visit us at http://s olutions.broth er.com where you can get ...

  • Brother ADS-2100 - page 2

    i Definitions of warnin gs, cautions and notes We use the following icons throughou t this User’s Guide: Trademarks Brother and the Brother logo are registered trade ma rks and BRAdmin Light and BRAdmin Profe ssional are trademarks of Brother Industries, Ltd. UNIX is a registered trademark of The Open Group. Apple and Macintosh are registered tra ...

  • Brother ADS-2100 - page 3

    ii IMPORTANT NOTE:  This product is approved for use in the country of purcha se only. Do not use this p roduct outside the country of purchase as it ma y violate the wireless telecommunication and power reg ulations of that country.  Windows ® XP in this document represents Windows ® XP Professional, Windows ® XP Professional x64 Edition ...

  • Brother ADS-2100 - page 4

    iii Table of Contents 1 Introduction 1 Overview ............... ................ ................ ................... ................. ................ ................ ................................ .1 Network features ................... ................ ................ ................ .................... ................ ........ ......... ...

  • Brother ADS-2100 - page 5

    iv 4 Wireless configuration for Windows ® using the Brother installer application (For HL-2170W) 24 Configuration in Infrastructure mode ........................... ................... ................ ................... .......... ....... .....24 Before configuring the wireless settings ................ ................ ................... ..... ...

  • Brother ADS-2100 - page 6

    v 9 Internet printing for Windows ® 94 Overview ............... ................ ................ ................... ................. ................ ................ .... ........................... 94 IPP printing for Windows ® 2000/XP, Windows Vista ® and Windows Server ® 2003 ...... .................... ..... 94 For Windows Vista ® .... ...

  • Brother ADS-2100 - page 7

    vi 15 Troubleshooting 113 Overview ............... ................ ................ ................... ................. ................ ................ ............................. 113 General problems .............. ................... ................ ................ .................... ................ .......... ................ ...113 ...

  • Brother ADS-2100 - page 8

    1 1 1 Overview 1 The Brother printer can be shared on a 10/100Mb wi red or IEEE 802.11b/802.11g wi reless (HL-2170W only) Ethernet network using the internal network p rint serv er. The print server provides printing services for Windows ® 2000/XP/XP Professional x64 Edition, Windows Vista ® , Windows Server ® 2003/ 2003 x64 Edition supporting t ...

  • Brother ADS-2100 - page 9

    Introduction 2 1 Network features 1 The Brother HL-2100 series have the fo llowing basic network features. Network print ing 1 The print server provides printing services for Windows ® 2000/XP, Windows Vista ® and Windows Server ® 2003 supporting the TCP/IP protocols and Macintosh supporting TCP/IP (Mac OS ® X 10.2.4 or greater). Management uti ...

  • Brother ADS-2100 - page 10

    Introduction 3 1 Web Based Management (web browser) 1 Web Based Management (web browser) is a utility fo r mana ging network connected Brother devices, using the HTTP (Hyper Text Transfer Proto col ). This utility can view th e status of Brother products on your network and configure the machine or networ k settings using a standard web browser tha ...

  • Brother ADS-2100 - page 11

    Introduction 4 1 Network Shared printing 1 In a Network Shared environment, e ach computer sends d ata via a centrally controlled co mputer. This type of computer is often called a “Server” or a “Print Server”. Its job is to control the printing of all print jobs. 1 Network Shared 2 Also known as “Server” or “Print server” 3P r i n ...

  • Brother ADS-2100 - page 12

    Introduction 5 1 Wireless network connection examples (HL-2170W) 1 Connected to a computer wi th an access point in the ne twork (Infrastructure mode) 1 This type of network has a central access point at the heart of the network. The access point can also act as a bridge or a gateway to a wired network. When the Brot her wireless printer (your prin ...

  • Brother ADS-2100 - page 13

    Introduction 6 1 Protocols 1 TCP/IP protocols and funct ionalities 1 Protocols are the standardize d sets of rules for tra nsmi tting data on a network. Protocols allow users to gain access to network connected resources. The print server used on th is Brother product supp orts the TCP/IP (Transmission Control Protocol/Internet Protocol) protocol. ...

  • Brother ADS-2100 - page 14

    Introduction 7 1 IPP 1 Internet Printing Protocol (IPP Version 1.0) allows you to print documents directly to any acce ssible printer via the internet. mDNS 1 mDNS allows the Brother print server to automatically config ure itself to work in a Mac OS ® X Simple Network Configured system. (Mac OS ® X 10.2.4 or greater). TELNET 1 The Brother print ...

  • Brother ADS-2100 - page 15

    8 2 2 Overview 2 Before using your Brother printe r in a network environm ent, you must configure the TCP/IP se ttings. In this chapter, you will learn the basic steps required to prin t over the network using the TCP/IP pro tocol. We recommend that you use the Brother installer appl ication on the CD-ROM we have pro vided with the printer. By usin ...

  • Brother ADS-2100 - page 16

    Configuring your printer for a ne twork 9 2 Subnet mask 2 Subnet masks restrict network communication.  Example: Computer 1 can talk to Computer 2 • Computer 1 IP Address:192.168.1.2 Subnet Mask:255.255.255.0 • Computer 2 IP Address:192.168.1.3 Subnet Mask:255.255.255.0 Note 0 denotes that there is no limit to comm unication at this part of ...

  • Brother ADS-2100 - page 17

    Configuring your printer for a ne twork 10 2 Setting the IP address and subnet mask 2 Using the BRAdmin Light utility to configure your network printer 2 BRAdmin Light 2 The BRAdmin Light utility is designed for init ial setup of Brother network con nected devices. It can also search for Brother products in a TCP/IP enviro nment, view the status an ...

  • Brother ADS-2100 - page 18

    Configuring your printer for a ne twork 11 2 c Double-click the unconfigured device. Note • If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the device will appear as Unconfigured in the BRAdmin Light utility screen . • You can find the node name and Ethernet address by printing out the Printer ...

  • Brother ADS-2100 - page 19

    Configuring your printer for a ne twork 12 2 Changing the print server settings 2 Note For the wireless network users, yo u need to configure the wirele ss settings to change the printer settings. See Configuring the wireless ne twork settings (For HL-2170W) on page 15. Using the BRAdmin Light utility to change the print server settings 2 a Start t ...

  • Brother ADS-2100 - page 20

    Configuring your printer for a ne twork 13 2 Using the BRAdmin Professional utility to change print server settings (for Windows ® ) 2 Note • Please use the latest version of the BRAdmin Professi onal utilit y that is available as a download from http://solutions.brother.com This utility is only available for Windows ® users. • Node name: The ...

  • Brother ADS-2100 - page 21

    Configuring your printer for a ne twork 14 2 Using Web Based Management (web browser) to change the print server settings 2 A standard web browser can be used to chang e your pr int server settings using the HTTP (Hyper Text Transfer Protocol). See How to configure the print server se ttings using Web Based Manag ement (web browser) on page 107. Us ...

  • Brother ADS-2100 - page 22

    15 3 3 Overview 3 To connect your printer to your wireless network, you need to follow the steps in the Quick Setup Guide or the Network User’s Guide. We recommend that you use th e Brother installer application on the CD-ROM which we have provided with the printer. By using this application, you can easily connect your printer to your wireless n ...

  • Brother ADS-2100 - page 23

    Configuring the wireless network settings (For HL-2170W) 16 3  Channels Wireless networks use channels. Each wireless channe l is on a different frequency. Th ere are up to 14 different channels that can be used when using a wire less network. However, in many countries the number of channels available are restricted . For further information, s ...

  • Brother ADS-2100 - page 24

    Configuring the wireless network settings (For HL-2170W) 17 3 •C K I P The original Key Integrity Protocol for LEAP by Cisco Systems, Inc.  Network Key There are some rules for each security method: • Open system/Shared key with WEP This key is a 64-bit or 128-bit value that mu st be entered in an ASCII or hexade cimal format. • WPA-PSK/WP ...

  • Brother ADS-2100 - page 25

    Configuring the wireless network settings (For HL-2170W) 18 3 Step by step chart 3 For Infrastructure mode 3 a Confirm your network environment. See page 20 b Confirm your wireless network setup method. See page 21 c Configure your printer for a wireless n etwork. See page 23 Wireless configuration and installing prin ter driver have been completed ...

  • Brother ADS-2100 - page 26

    Configuring the wireless network settings (For HL-2170W) 19 3 For Ad-hoc mode 3 a Confirm your network environment. See page 20 b You need to configure the wireless network settings by using the Brother installer application. c Configure your printer for a wireless n etwork. See page 23 Wireless configuration and installing prin ter driver have bee ...

  • Brother ADS-2100 - page 27

    Configuring the wireless network settings (For HL-2170W) 20 3 1. Confirm your network environment 3 Connected to a computer with an acces s point in the network (Infrastructure mode) 3 This type of network has a central access point at the heart of the network. The access point can also act as a bridge or a gateway to a wired network. When your Bro ...

  • Brother ADS-2100 - page 28

    Configuring the wireless network settings (For HL-2170W) 21 3 2. Confirm your wirele ss network setup method in infrastructure mode 3 There are three methods to configure your wireless network printer; by usin g the Brother installer application on the CD-ROM (recommended), using the one-push wireless setting mode and u sing the PIN Method of Wi-Fi ...

  • Brother ADS-2100 - page 29

    Configuring the wireless network settings (For HL-2170W) 22 3 Configuration using the one-push wire less setting mode 3 If your wireless access point (A) supports either SecureEasySetup™, Wi-Fi Protected Setup ™ (PBC 1 ) or AOSS™, you can configure the mach ine without a computer. 1 Push Button Configuration Configuration using the PIN Meth o ...

  • Brother ADS-2100 - page 30

    Configuring the wireless network settings (For HL-2170W) 23 3 3. Configure your printer for a wireless network 3 Using the Brother installer applicatio n on the CD-ROM to co nfigure your wireless network prin ter (Recommended) 3 For installation, see Wireless configurat ion for Windows® using the Brother installer applicatio n (For HL-2170W) in Ch ...

  • Brother ADS-2100 - page 31

    24 4 4 Configuration in Infrastructure mode 4 Before configuring th e wireless settings 4 IMPORTANT • If you are going to connect the printer t o your network, we recommend that you contact your system administrator prior to installation. You must know your wireless network settings before you pro ceed with this installation. • If you have prev ...

  • Brother ADS-2100 - page 32

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 25 4 d Click Wireless Network users . Note For Windows Vista ® , when the User Account Control scre en appears, click Allow . e Choose Wireless Setup and Driver Install (Recommended) or Wireless Setup Only , and then click Next . ...

  • Brother ADS-2100 - page 33

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 26 4 f Choose Step by Step install (Recommended) and then click Next . g Choose With cable (Recommended) and then click Next . h Connect the Brother wireless device to your a ccess point using a network cable and click Next . ...

  • Brother ADS-2100 - page 34

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 27 4 i Choose the printer you wish to configure, and click Next . If the list is blank, check if the access point and the printer are powered on, and the n click Refresh . Note The default Node name is “BRNxxxxxxxxxxxx”. j The wizard will search for w ...

  • Brother ADS-2100 - page 35

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 28 4 • If your access point is set to not broadcast the SSID you can ma nually add it by clicking the Add button. Follow the on-screen instructions for entering th e Name (SSID) , and then click Next . k If your network is not configured for Authentica ...

  • Brother ADS-2100 - page 36

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 29 4 l If your network is configur ed for Authentication and Encryptio n, the following screen will appear. When configuring your Brother wireless printer, you mu st ensure that it is configured to match the Authentication and Encryption settings o f yo u ...

  • Brother ADS-2100 - page 37

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 30 4 n Disconnect the network cable between your access point (hub or router) and the prin ter, and click Next . You have completed the wireless setup. If you chose to insta ll the printer driver in step e , Go to Installing the printer driver on pa ge 44 ...

  • Brother ADS-2100 - page 38

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 31 4 Configuration using the auto matic wireless (one-push) method 4 IMPORTANT If you are going to connect the printer t o your network, we recommend that you contact your system administrator prior to installation. a Make sure that the power cord is plug ...

  • Brother ADS-2100 - page 39

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 32 4 f Click Wireless Network users . Note For Windows Vista ® , when the User Account Control scre en appears, click Allow . g Choose Wireless Setup and Driver Install (Recommended) or Wireless Setup Only , and then click Next . ...

  • Brother ADS-2100 - page 40

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 33 4 h Choose Automatic install (Advanced) and click Next . i Confirm the on-screen message and click Ne xt . j Press the wireless setup button located at the back of the machine for less than 2 seconds as show in the illustration below. Th is will put th ...

  • Brother ADS-2100 - page 41

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 34 4 k The printer starts the one-push wire less setting mode. The printer searches for an access point that suppor ts SecureEasySetup™, Wi-Fi Protected Setup™ or AOSS™ for 2 minutes. l Put your access point in the SecureEasySet up™ mode, the Wi-F ...

  • Brother ADS-2100 - page 42

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 35 4 n Click Next or Finish . You have completed the wireless setup. If you chose to insta ll the printer driver in step g , Go to the next step. o Check the box after you confirm that you have completed the wireless settings, and then click Next . Go to ...

  • Brother ADS-2100 - page 43

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 36 4 Configuration in Ad-hoc mode 4 Before configuring th e wireless settings 4 IMPORTANT • If you have previously configured the wireless settings of the printer, you must reset the print server back to the default factory settings (see Restoring the n ...

  • Brother ADS-2100 - page 44

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 37 4 d Click Wireless Network users . Note For Windows Vista ® , when the User Account Control scre en appears, click Allow . e Choose Wireless Setup and Driver Install (Recommended) or Wireless Setup Only , and then click Next . ...

  • Brother ADS-2100 - page 45

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 38 4 f Choose Step by Step install (Recommended) and then click Next . g Choose Without cable (Advanced) and then click Next . h Read the Important Notice to enable the wireless interface. Hold down the Go button for 10 seconds, and then release the Go bu ...

  • Brother ADS-2100 - page 46

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 39 4 Note To confirm the wireless setting is enabled, check the text to the right side of IEEE 802 .11b/g in the Node Type section on the Network Configuration page. Active means tha t the wireless setting is e nabled and Inactive means that the wir eless ...

  • Brother ADS-2100 - page 47

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 40 4 j To communicate with the un-configured wire less prin ter, temporarily change the wireless set tings on your computer to match your p rinter’s default sett ings shown on th is screen. Check the box after you confirm these settings, and then click ...

  • Brother ADS-2100 - page 48

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 41 4 6 Check the Wireles s Network Connection sta tus. It may take a few minutes to change from 0.0.0.0 to 169.254.x.x IP address to be shown on screen (where x.x. are numbers between 1 and 254). k Choose the printer you wish to configure, and click Next ...

  • Brother ADS-2100 - page 49

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 42 4 • If your target Ad-hoc network does not appear on the list, yo u can manually add it by clicking the Add button. Check This is an Ad-hoc network and there is no access point. , and the n enter the Name (SSID) and the Channel nu mber, and then clic ...

  • Brother ADS-2100 - page 50

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 43 4 Note • If you want to setup more than W EP key1, click Advanced . • If you do not know the Authenticatio n or Encryption settings for your network, contact your n etwork administrator. • If the Authentication Method is set to Open System and th ...

  • Brother ADS-2100 - page 51

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 44 4 Installing the printer driver 4 Improper Setup DO NOT try to cancel any of the screens during this installat ion. If your wireless settings fail, an error message will appear during the installation of the printer driver and the installation will be ...

  • Brother ADS-2100 - page 52

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 45 4 c Choose Search the network for devices and choose fro m a list of discovered devices (Recommended) . Or enter yo ur printer's IP address o r its node name. Click Next . Note You can find your printer’s IP address and the node na me by printin ...

  • Brother ADS-2100 - page 53

    Wireless configuration fo r Windows ® using the Brother installer application (For HL-21 70W) 46 4 e Click Finish . Note • If you want to register your product on-line, check On -Line Registration . • If you do not want to set your printer a s Default printer, uncheck Set as Default Printer . • If you disable the Personal Firewall software ( ...

  • Brother ADS-2100 - page 54

    47 5 5 Configuration in Infrastructure mode 5 Before configuring th e wireless settings 5 IMPORTANT • If you are going to connect the printer t o your network, we recommend that you contact your system administrator prior to installation. You must know your wireless network settings before you pro ceed with this installation. • If you have prev ...

  • Brother ADS-2100 - page 55

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 48 5 c Click Install Printer Driver on the menu screen. d Click Wireless Network users . e Choose Wireless Setup and Driver Install (Recommended) or Wireless Setup Only , and then click Next . ...

  • Brother ADS-2100 - page 56

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 49 5 f Choose Step by Step install (Recommended) and then click Next . g Choose With cable (Recommended) and then click Next . h Connect the Brother wireless device to your a ccess point using a network cable and click Next . ...

  • Brother ADS-2100 - page 57

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 50 5 i Choose the printer you wish to configure, and click Next . If the list is blank, check if the access point and the printer are powered on, and the n click Refresh . Note The default Node name is “BRNxxxxxxxxxxxx”. j The wizard will search for ...

  • Brother ADS-2100 - page 58

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 51 5 • If your access point is set to not broadcast the SSID you can ma nually add it by clicking the Add button. Follow the on-screen instructions for entering th e Name (SSID) , and then click Next . k If your network is not configured for Authentic ...

  • Brother ADS-2100 - page 59

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 52 5 l If your network is configur ed for Authentication and Encryptio n, the following screen will appear. When configuring your Brother wireless printer, you mu st ensure that it is configured to match the Authentication and Encryption settings o f yo ...

  • Brother ADS-2100 - page 60

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 53 5 n Disconnect the network cable between your access point (hub or router) and the prin ter, and click Next . You have completed the wireless setup. If you chose to insta ll the printer driver in step e , Go to Installing the printer driver on pa ge ...

  • Brother ADS-2100 - page 61

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 54 5 Configuration using the auto matic wireless (one-push) method 5 IMPORTANT If you are going to connect the printer t o your network, we recommend that you contact your system administrator prior to installation. a Make sure that the power cord is pl ...

  • Brother ADS-2100 - page 62

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 55 5 f Click Wireless Network users . g Choose Wireless Setup and Driver Install (Recommended) or Wireless Setup Only , and then click Next . h Choose Automatic install (Advanced) and click Next . ...

  • Brother ADS-2100 - page 63

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 56 5 i Confirm the on-screen message and click Ne xt . j Press the wireless setup button located at the back of the machine for less than 2 seconds as show in the illustration below. Th is will put the printer in on e-push wireless setting mode. This fe ...

  • Brother ADS-2100 - page 64

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 57 5 m Wait for the Ready LED ( Go button) of your printer to indicate connection succee ded. The Ready LED will turn on for 5 minutes. (See the table below) This indication means the ma chine has successfully connected to your router or access poin t. ...

  • Brother ADS-2100 - page 65

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 58 5 n Click Next or Finish . You have completed the wireless setup. If you chose to insta ll the printer driver in step g , Go to the next step. o Check the box after you confirm that you have completed the wireless settings, and then click Next . Go t ...

  • Brother ADS-2100 - page 66

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 59 5 Configuration in Ad-hoc mode 5 Before configuring th e wireless settings 5 IMPORTANT • If you have previously configured the wireless settings of the printer, you must reset the print server back to the default factory settings (see Restoring the ...

  • Brother ADS-2100 - page 67

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 60 5 d Click Wireless Network users . e Choose Wireless Setup and Driver Install (Recommended) or Wireless Setup Only , and then click Next . f Choose Step by Step install (Recommended) and then click Next . ...

  • Brother ADS-2100 - page 68

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 61 5 g Choose Without cable (Advanced) and then click Next . h Read the Important Notice to enable the wireless interface. Hold down the Go button for 10 seconds, and then release the Go button when the printer prints a Network Configuration page . Chec ...

  • Brother ADS-2100 - page 69

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 62 5 i You need to temporarily change your computer’s wire less settings. Follow the on-screen instructions. Make sure you take notes on all the settings such as SSID or channel of your computer. You will need them to return your computer back to it s ...

  • Brother ADS-2100 - page 70

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 63 5 2 Click the Network tab to see the ava ilable wireless devices. You ca n see the Brother wireless print server in the Network option. Select SETUP . 3 Your wireless network is connected succe ssfully. k Choose the printer you wish to configure, and ...

  • Brother ADS-2100 - page 71

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 64 5 • If your target Ad-hoc network does not appear on the list, yo u can manually add it by clicking the Add button. Check This is an Ad-hoc network and there is no access point. , and the n enter the Name (SSID) and the Channel nu mber, and then cl ...

  • Brother ADS-2100 - page 72

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 65 5 Note • If you want to setup more than W EP key1, click Advanced . • If you do not know the Authenticatio n or Encryption settings for your network, contact your n etwork administrator. • If the Authentication Method is set to Open System and ...

  • Brother ADS-2100 - page 73

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 66 5 Installing the printer driver 5 Improper Setup DO NOT try to cancel any of the screens during this installat ion. If your wireless settings fail, an error message will appear during the installation of the printer driver and the installation will b ...

  • Brother ADS-2100 - page 74

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 67 5 • If your printer fails to appear on th e list, reset the print server back to the default factory settings (see Restoring the network settings to factory default on page 100) and try the wireless se tup again. c When this screen appears, click O ...

  • Brother ADS-2100 - page 75

    Wireless configuration for Macinto sh ® using the Brother installer application (For HL-21 70W) 68 5 f Choose your printer, and then click Ad d . Note • If there is more than one of th e same printer model connected on your network, the Ethernet address (MAC address) will be displayed after the mo del name. • You can find your printer’s Ethe ...

  • Brother ADS-2100 - page 76

    69 6 6 Overview 6 If your wireless access point supports either SecureEasySetup™, Wi-Fi Protected Setup ™ (PBC 1 ) or AOSS™, you can configur e the machine easily without a compute r. Your Brother printer has one-push wireless setting mode. This feature automatically de tects which mode your a ccess point uses for one-push configuration (Secu ...

  • Brother ADS-2100 - page 77

    Wireless configuration using the one-p ush wireless setting mode (For HL-2170W) 70 6 How to configure your wireless printer, using the one-push wireless setting mode 6 IMPORTANT If you are going to connect the printer t o your network, we recommend that you contact your system administrator prior to installation. a Press the wireless setup button l ...

  • Brother ADS-2100 - page 78

    Wireless configuration using the one-p ush wireless setting mode (For HL-2170W) 71 6 d Wait for the Ready LED ( Go button) of your printer to indicate connection succee ded. The Ready LED will turn on for 5 minutes. (See the table below) This indication means the ma chine has successfully connected to your router or access poin t. You c an now use ...

  • Brother ADS-2100 - page 79

    Wireless configuration using the one-p ush wireless setting mode (For HL-2170W) 72 6 For Windows ® users 6 Improper Setup DO NOT try to cancel any of the screens during this installat ion. a Turn on your computer. (You must be logged on with Administrator rights.) Close any applications runn ing before configuration. b Put the supplied CD-ROM into ...

  • Brother ADS-2100 - page 80

    Wireless configuration using the one-p ush wireless setting mode (For HL-2170W) 73 6 Note For Windows Vista ® , when the User Account Control scre en appears, click Allow . e Choose Driver Install Only , and then click Next . f When the License Agreement window appea rs, click Yes if you agree to the License Agreement . ...

  • Brother ADS-2100 - page 81

    Wireless configuration using the one-p ush wireless setting mode (For HL-2170W) 74 6 g Choose Standard Installation , and then click Next . h Choose Search the network for devices and choose fro m a list of discovered devices (Recommended) . Or enter yo ur printer's IP address o r its node name. Click Next . Note You can find your printer’s ...

  • Brother ADS-2100 - page 82

    Wireless configuration using the one-p ush wireless setting mode (For HL-2170W) 75 6 i Choose your printer, and then click Ne xt . Note If your printer takes a long time (abo ut 1 minute) to appear on the list, click Refresh . j Click Finish . Note • If you want to register your product on-line, check On -Line Registration . • If you do not wan ...

  • Brother ADS-2100 - page 83

    Wireless configuration using the one-p ush wireless setting mode (For HL-2170W) 76 6 For Macintosh ® users 6 Improper Setup DO NOT try to cancel any of the screens during this installat ion. a Turn on your Macin tosh ® . b Put the supplied CD-ROM into your CD-ROM drive. Double-click the HL 2100 icon on your deskt op. Double-click the Start Here i ...

  • Brother ADS-2100 - page 84

    Wireless configuration using the one-p ush wireless setting mode (For HL-2170W) 77 6 e Choose Driver Install Only , and then click Next . Follow the on-screen instructions. Then, restart your Macintosh ® . For Mac OS ® X 10.2.4 to 10.2.8 users: Go to step h . For Mac OS ® X 10.3 or greater users: Go to step f . f The Brother software will search ...

  • Brother ADS-2100 - page 85

    Wireless configuration using the one-p ush wireless setting mode (For HL-2170W) 78 6 g When this screen appears, click OK . For Mac OS ® X 10.3 or greater users: Setup is now complete. h When this screen appears, click Add . i Make the following selection. ...

  • Brother ADS-2100 - page 86

    Wireless configuration using the one-p ush wireless setting mode (For HL-2170W) 79 6 j Choose your printer, and then click Ad d . Note • If there is more than one of th e same printer model connected on your network, the Ethernet address (MAC address) will be displayed after the mo del name. • You can find your printer’s Ether net address (MA ...

  • Brother ADS-2100 - page 87

    80 7 7 Overview 7 If your wireless access point su pports Wi-Fi Protected Setup™ (PIN Method), you can configure the machine easily without a computer. The PIN (Pe rsonal Identi fication Number) Method is one of the connection methods developed by the Wi-Fi Alliance. By inputting a PIN which is created by an Enr ollee (your machine) to the Regist ...

  • Brother ADS-2100 - page 88

    Wireless configuration using the PIN Method of Wi-Fi Protected Setup™ (For HL-2170W ) 81 7 b The printer will print a piece of paper that shows an 8 dig it PIN and starts searching for an access point for 5 minutes. c Using a computer that is on the network, typ e http://access_point_ip_address/ in to your browser. (Where access_point_ip_address ...

  • Brother ADS-2100 - page 89

    Wireless configuration using the PIN Method of Wi-Fi Protected Setup™ (For HL-2170W ) 82 7 d Wait for the Ready LED ( Go button) of your printer to indicate connection succeed ed. (See the table below) This indication means the machine has successf u lly connected to your access point / router. You can now use your printer on the wireless network ...

  • Brother ADS-2100 - page 90

    Wireless configuration using the PIN Method of Wi-Fi Protected Setup™ (For HL-2170W ) 83 7 For Windows ® users 7 Improper Setup DO NOT try to cancel any of the screens during this installat ion. a Turn on your computer. (You must be logged on with Administrator rights.) Close any applications runn ing before configuration. b Put the supplied CD- ...

  • Brother ADS-2100 - page 91

    Wireless configuration using the PIN Method of Wi-Fi Protected Setup™ (For HL-2170W ) 84 7 Note For Windows Vista ® , when the User Account Control scre en appears, click Allow . e Choose Driver Install Only , and then click Next . f When the License Agreement window appea rs, click Yes if you agree to the License Agreement . ...

  • Brother ADS-2100 - page 92

    Wireless configuration using the PIN Method of Wi-Fi Protected Setup™ (For HL-2170W ) 85 7 g Choose Standard Installation , and then click Next . h Choose Search the network for devices and choose fro m a list of discovered devices (Recommended) . Or enter yo ur printer's IP address o r its node name. Click Next . Note You can find your prin ...

  • Brother ADS-2100 - page 93

    Wireless configuration using the PIN Method of Wi-Fi Protected Setup™ (For HL-2170W ) 86 7 i Choose your printer, and then click Ne xt . Note If your printer takes a long time (abo ut 1 minute) to appear on the list, click Refresh . j Click Finish . Note • If you want to register your product on-line, check On -Line Registration . • If you do ...

  • Brother ADS-2100 - page 94

    Wireless configuration using the PIN Method of Wi-Fi Protected Setup™ (For HL-2170W ) 87 7 For Macintosh ® users 7 Improper Setup DO NOT try to cancel any of the screens during this installat ion. a Turn on your Macin tosh ® . b Put the supplied CD-ROM into your CD-ROM drive. Double-click the HL 2100 icon on your deskt op. Double-click the Star ...

  • Brother ADS-2100 - page 95

    Wireless configuration using the PIN Method of Wi-Fi Protected Setup™ (For HL-2170W ) 88 7 e Choose Driver Install Only , and then click Next . Follow the on-screen instructions. Then, restart your Macintosh ® . For Mac OS ® X 10.2.4 to 10.2.8 users: Go to step h . For Mac OS ® X 10.3 or greater users: Go to step f . f The Brother software wil ...

  • Brother ADS-2100 - page 96

    Wireless configuration using the PIN Method of Wi-Fi Protected Setup™ (For HL-2170W ) 89 7 g When this screen appears, click OK . For Mac OS ® X 10.3 or greater users: Setup is now complete. h When this screen appears, click Add . i Make the following selection. ...

  • Brother ADS-2100 - page 97

    Wireless configuration using the PIN Method of Wi-Fi Protected Setup™ (For HL-2170W ) 90 7 j Choose your printer, and then click Ad d . Note • If there is more than one of th e same printer model connected on your network, the Ethernet address (MAC address) will be displayed after the mo del name. • You can find your printer’s Ether net add ...

  • Brother ADS-2100 - page 98

    91 8 8 Overview 8 To connect your printer to your network, you need to follow the steps in the Quick Setup Guide. We recommend that you use the Broth er installer applicat ion on the CD-ROM wh ich we have provided with the printer. By using this application, you can easily connec t your printer to yo ur network and install the network software and ...

  • Brother ADS-2100 - page 99

    Network printing from W indows ® : basic TCP/IP Peer-to -Peer printing 92 8 g Now that you have configured the port, you must specify which printer driver you wish to use. Select the appropriate driver from the list of supported printers. If you are using a driver supplie d with the printer on the CD-ROM then select the Have Disk option to browse ...

  • Brother ADS-2100 - page 100

    Network printing from W indows ® : basic TCP/IP Peer-to -Peer printing 93 8 l Specify a name and click Next . m Continue through the Wizard clicking Finish when complete . Printer driver already installed 8 If you have already installed the printer driver and wish to configure it for network pr inting, follow these steps: a For Windows Vista ® : ...

  • Brother ADS-2100 - page 101

    94 9 9 Overview 9 Windows ® 2000/XP, Windows Vista ® and Windows Server ® 2003 users can print using TCP/IP and the standard Network Printing IPP protocol software built into Windows ® 2000/XP, Windows Vista ® and Windows Server ® 2003. Note • You must configure the IP address on your printer before you proceed with this chapter . If you ne ...

  • Brother ADS-2100 - page 102

    Internet printing for Windows ® 95 9 f When you click Next , Windows Vista ® will make a connection with the URL that you specified .  If the printer driver has already been installe d: 1 You will see the printer selection screen in th e Add Printer wizard. Click OK . If the appropriate printer driver is alre ady installed on your computer, Wi ...

  • Brother ADS-2100 - page 103

    Internet printing for Windows ® 96 9 For Windows ® 2000/XP and Windows Server ® 2003 9 a For Windows ® XP and Windows Server ® 2003: Click the Start button and select Printers and Faxes . For Windows ® 2000: Click the Start button, select Settings and then Printers . b For Windows ® XP and Windows Server ® 2003: Click A d dap r i n t e r to ...

  • Brother ADS-2100 - page 104

    Internet printing for Windows ® 97 9 printer automatically. This means that yo u do not need to inform Windo ws ® 2000 about the type of printer driver to be used. Go to h . h The driver installation sta rts automatically. Note If the printer driver that you ar e installing does not have a Digital Certificate you will se e a warning message. Clic ...

  • Brother ADS-2100 - page 105

    98 10 10 Overview 10 This chapter explains how to print from a Macintosh ® on a Network using the Simple Network Configuration capabilities on Mac OS ® X 10.2.4 or greater. Printing from a Macintosh ® using the Simple Network Configuration capabilities 10 With the release of Mac OS ® X 10.2, Apple ® introduced Simple Network Configuration capa ...

  • Brother ADS-2100 - page 106

    Network printing from Maci ntosh ® 99 10 f Choose your printer and then click Add . The printer is now ready to print. Other sources of information 10 How to configure the IP address of the printer, see Configuring your pr inter for a network on page 8 . (Mac OS ® X 10.2.x) (Mac OS ® X 10.3.x) (Mac OS ® X 10.4.x) ...

  • Brother ADS-2100 - page 107

    100 11 11 Overview 11 With the Go button on the control panel you can do the following: Print the Printer Settings Page 11 See Printing the Printer Settings Pag e on page 100 for information on ho w to print the Printe r Settings Page. Restore the network settings to factory default 11 See Restoring the network settings to fact ory default on page ...

  • Brother ADS-2100 - page 108

    Control panel features 101 11 d Press the Go button seven times. Make sure that all the LEDs light up to indicate the print server has been reset to its default settings. Note You can reset the print server ba ck to its default factory settings using the BRAdmin applications or Web Based Management (web br owser). For more information, see Changing ...

  • Brother ADS-2100 - page 109

    102 12 12 Overview 12 This chapter explains the security methods supp orted by your printer and how to configure them. You ca n also learn how to manage your ne twork printer securely. Security methods fo r E-mail notification 12 The Brother machine supports the following se curity methods for E-mail notification. POP before SMTP (PbS) 12 A user au ...

  • Brother ADS-2100 - page 110

    Security methods 103 12 Using E-mail notification wi th user authen tication 12 To use the E-mail notification function via a secure SMTP server that requires a user authentication, you need to use POP before SMTP or SMTP-AUTH method. These methods prevent an unauthorized user from accessing the mail server. You can use Web Based Manageme nt (web b ...

  • Brother ADS-2100 - page 111

    Security methods 104 12 g You can configure the POP3/S MTP settings on this page. Note • You can also change the SMTP port nu mber using Web Based Management. This is useful if your ISP (Internet Service Provider) implements the “Outbou nd Port 25 Blocking (OP25B)” service, and yo u are not using the ISP’s SMTP server. By changing the SMTP ...

  • Brother ADS-2100 - page 112

    Security methods 105 12 Managing your network printer securely using BRAdmin Professional (for Windows ® ) 12 To use the BRAdmin Professional utilit y secure ly, you need to follow the points below.  We strongly recommend to use the latest version of the BRAdmin Pro fessional utility or Web BRAdmin that are available as a down load from http:// ...

  • Brother ADS-2100 - page 113

    106 13 13 Overview 13 A standard Web Browser can be used to manage yo ur prin ter using the HTTP (Hyper Text Transfer Protocol). You can get the following information from a printer on your network using a web browser.  View the printer status, configurati on and maintenance informatio n details  View the software version information of the p ...

  • Brother ADS-2100 - page 114

    Web Based Management 107 13 How to configure the print ser ver settings using Web Based Management (web browser) 13 A standard web browser can be used to chang e your pr int server settings using the HTTP (Hyper Text Transfer Protocol). Note We recommend Microsoft Internet Explorer 6.0 ® (or greater) or Firefox ® 1.0 (or greater) for Windows ® a ...

  • Brother ADS-2100 - page 115

    108 14 14 Overview 14 The Driver Deployment Wizard software can be used to ease the installation or even automate the installation of a locally connected or network connected printer. The Driver Deployment Wizard can also be used to create self running executable files which when run on a remote PC, completely automates the installation of a printe ...

  • Brother ADS-2100 - page 116

    Driver Deployment Wizard (Windows ® only) 109 14 Network Shared 14 The device is connected to a network and a cent ral print queue is u sed to manage all print jobs. 1 Network Shared 2 Print server 3 Network printer 4 TCP/IP or USB 5 Client Computer Local Printer (USB) 14 The device is connected to the computer using an USB cab le. 1 Client Comput ...

  • Brother ADS-2100 - page 117

    Driver Deployment Wizard (Windows ® only) 110 14 How to install the Driver Deployment Wizard software 14 a Put the supplied CD-ROM into your CD-ROM drive. The opening scree n will appear automatically. b Select your model and the language. Then click Install Other Drivers or Utilitie s . c Select the Driver Deploymen t Wizard installation program. ...

  • Brother ADS-2100 - page 118

    Driver Deployment Wizard (Windows ® only) 111 14  Setting the IP Address If the printer does not have an IP add ress, the Wizard will allow you to change t he IP address by selecting the printer from the list and by selecting the Configure IP option. A dialogue box then appears which allows you to specify informa tion such as the IP address, su ...

  • Brother ADS-2100 - page 119

    Driver Deployment Wizard (Windows ® only) 112 14 h A summary screen will appear. Conf irm the settings of the driver.  Creating an executable file The Driver Deployment Wizard software can also be used to create self runnin g .EXE files. These self-running .EXE files can be saved to the netw ork, copied to a CD-ROM, USB memory or even E-mailed ...

  • Brother ADS-2100 - page 120

    113 15 15 Overview 15 This chapter explains how to resolve typical netwo rk problems you may encounte r when using the Brother network printer. If, after reading this chapter, yo u are unable to resolve your problem, please visit the Brothe r Solutions Center at: http://solutions.brother.com This chapter is divided into the following sections:  ...

  • Brother ADS-2100 - page 121

    Troubleshooting 114 15 Windows ® XP SP2 users: 15 a Click the Start button , Settings , and then Control Panel . b Double click Windows Firewall . c Click the Gen eral tab. Verify that Off (not reco mmended) is selected. d Click OK . Note After the Brother software is installed, resta rt your Firewall.  For Macintosh ® Re-select your printer i ...

  • Brother ADS-2100 - page 122

    Troubleshooting 115 15 d Verify that the print server is on your network as follows:  For Windows ® Try pinging the print server from the host oper ating system command prompt with the comma nd: ping ipaddress Where ipaddress is the print server IP address (n ote that in some instances it can take up to two minutes for the print server to load ...

  • Brother ADS-2100 - page 123

    Troubleshooting 116 15 Printing problems 15 Print job is not printed 15 Make sure the status and configu ration of the print server. Check following: a Make sure that the printer is p owered on, is on-line and ready to print. b Print the Printer Settings Page of th e printer and c heck if the settings such as IP addre ss settings are correct for yo ...

  • Brother ADS-2100 - page 124

    Troubleshooting 117 15 Protocol-specific troubleshooting 15 Windows ® 2000/XP, Windows Vista ® and Windows Server ® 2003 IPP troubleshooting 15 I want to use a different Port number other than 631. 15 If you are using Port 631 for IPP printing, you may find that your firewall may not let the print data through. If this is the case, use a differe ...

  • Brother ADS-2100 - page 125

    Troubleshooting 118 15 Wireless network troubleshooting 15 Wireless setup problems 15 The Brother print server is not found during setup using the Brother in staller application on the CD- ROM. 15 a Make sure that the printer is p owered on, is on-line and ready to print. b Move your machine closer to the wirele ss access point / router and try aga ...

  • Brother ADS-2100 - page 126

    Troubleshooting 119 15 Wireless connection problem 15 The wireless network connection is sometim es disabled. 15 The wireless network connection status is af fected by the environment where th e Brother printer and other wireless devices are located. The followin g con ditions may cause connection problems:  A concrete or metal framed wall is in ...

  • Brother ADS-2100 - page 127

    120 A A Using services A A service is a resource that can be accessed by computers that wish to print to the Brother print server. The Brother print server provides the following predef ined services (do a SHOW SERVICE command in the Brother print server remote console to see a list of a vailable services): Enter HELP at the command prompt for a li ...

  • Brother ADS-2100 - page 128

    Appendix A 121 A Note In order to enable BOOTP, simply use an editor to delete the“#” (if there is no “#”, then BOOTP is already enabled). Then edit the BOOTP configuration file (usual ly /etc/bootptab) and enter the name, network type (1 for Ethernet), Ethernet address and the IP a ddress, subnet mask and gateway of the print se rver. Unfo ...

  • Brother ADS-2100 - page 129

    Appendix A 122 A Using APIPA to config ure the IP address A The Brother print server supports the Automatic Priva te IP Addressing (APIPA) protocol. With APIPA, clients automatically configure an IP address and subnet mask when a DHCP server is not available. The device chooses it's own IP address in the range 16 9.254.1.0 through to 169.254.2 ...

  • Brother ADS-2100 - page 130

    Appendix A 123 A ignore any attempts to do this. If you wish to ch ange the IP address again, use Web Based Ma nagement (web browser), TELNET (using the SET IP ADDRESS command) or factory re set the print server (which will then allow you to use the ARP command again). Using the TELNET console to configure the IP address A You can also use the TELN ...

  • Brother ADS-2100 - page 131

    Appendix A 124 A Using the Brother Web BRAdmin server so ftware for IIS* to configure the IP address A The Web BRAdmin server software is designed to ma nage all LAN/WAN Brother network connected devices. By installing the Web BRAdmin server software on a computer run ning IIS 1 , Administrators with a web browser can connect to t he Web BRAdmin se ...

  • Brother ADS-2100 - page 132

    Appendix A 125 A Installation when using a Ne twork Print Queue or Share A Note If you are going to connect to a shared printer on your network, we recommend that you ask your system administrator about the queue or share name for the printer prior to installation. Installing the driver and choosing th e correct printer queue or share name A a Turn ...

  • Brother ADS-2100 - page 133

    126 B B Print server specifications B Ethernet wired network B 1 If you want to use the IPv6 protocol, visit http://solutions.brother.com for more information. Appendix B B Network node type NC-6600 h Operating system support Windows ® 2000/XP, Windows ® XP Professional x64 Edition, Windows Vista ® , Windows Server ® 2003, 2003 x64 Edition, Mac ...

  • Brother ADS-2100 - page 134

    Appendix B 127 B Ethernet wireless network B 1 If you want to use the IPv6 protocol, visit http://solutions.brother.com for more information. Network node type NC-7400w Operating system support Windows ® 2000/XP, Windows ® XP Professional x64 Edition, Windows Vista ® , Windows Server ® 2003, 2003 x64 Edition, Mac OS ® X 10.2.4 or greater Proto ...

  • Brother ADS-2100 - page 135

    Appendix B 128 B Computer requirements B 1 Third party USB ports are not suppo rted. Management uti lities B 1 BRAdmin Professional and Web BRAdmin are available as a download from http://solutions.brother.com Computer Platform & Operating System Version Processor Minimum Speed Minimum RAM Recomm ended RAM Hard Disk Space to install Windows ® ...

  • Brother ADS-2100 - page 136

    Index 129 C C A Ad-hoc mode .......... ................ ................. . 5 , 20 , 36 , 59 AES ............... ................ ................ ................ ............ 16 AOSS ........ ................. ................ ............ 22 , 31 , 54 , 69 APIPA . ................ ................... ................. ............ 6 , 122 APOP . ...

  • Brother ADS-2100 - page 137

    Index 130 C Router .............. ................... ................ ................. ....... 9 S SecureEasySetup ............ ................ ...... 22 , 31 , 54 , 69 Security method ..... ................ ................. ................ 102 Service .......... ................ ................ ................ .......... 120 Shared key .... ...

Fabbricante Brother Categoria Scanner

I documenti che otteniamo dal fabbricante del dispositivoBrother ADS-2100 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Brother
- manuali per l’uso ADS-2100
- schede prodotto Brother
- opuscoli
- o etichette energetiche Brother ADS-2100
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Brother ADS-2100.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Brother ADS-2100, manuali di manutenzione, brevi manuali o manuali utente Brother ADS-2100. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Brother ADS-2100.

Manuali per l’uso simili

Manuale completo del dispositivo Brother ADS-2100, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Brother ADS-2100 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Brother ADS-2100.

Il manuale per l’uso completo Brother, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Brother ADS-2100 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Brother ADS-2100, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Brother ADS-2100 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Brother ADS-2100 - che ci dovrebbe aiutare nei primi passi durante l'uso Brother ADS-2100
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Brother ADS-2100
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Brother ADS-2100 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Brother ADS-2100?

Utilizza il modulo sottostante

Se non hai risolto il problema con Brother ADS-2100 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Brother ADS-2100 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)