-
Bertazzoni PRO30 4 GAS NE - page 1
1 INSTALLATION, USE & CARE MANUAL FREESTANDING GAS RANGES Models PRO30 4 GAS X [ M7S0GNU7X (2,5)A] Models PRO30 4 GAS AR [ M7S0GNU7S (2,5)A] Models PRO30 4 GAS BI [ M7S0GNU7W (2,5)A] Models PRO30 4 GAS NE M7S0GNU7N (2,5)A] Models PRO30 ...
-
Bertazzoni PRO30 4 GAS NE - page 2
2 BERTAZZONI SpA Via Palazzina 8 42016 Guastalla RE ITALY WWW.BERTAZZONI ‐ ITALIA.COM From the desk of the President Dear new owner of a Bertazzoni product, I want to thank you for choosing one of ...
-
Bertazzoni PRO30 4 GAS NE - page 3
3 TABLE OF CONTENTS WARRANTY AND SERVICE ......................................................................................................................... 4 CUSTOMER SERVICE ............................................................................................................................... .... ...
-
Bertazzoni PRO30 4 GAS NE - page 4
4 WARRANTY AND SERVICE All Bertazzoni products carry a 2 year parts and labor warranty. Service on all Bertazzoni products shall be carried out by factory ‐ trained professionals only. For warranty service please ...
-
Bertazzoni PRO30 4 GAS NE - page 5
5 IMPORTANT SAFETY INFORMATION PLEASE READ AND FOLLOW THESE IMPORTANT INSTRUCTIONS FOR THE SAFETY OF YOUR HOME AND OF THE PEOPLE LIVING IN IT. Save this Manual for local electrical inspector’s use. Read and sa ...
-
Bertazzoni PRO30 4 GAS NE - page 6
6 PRODUCT SPECIFICATIONS Dimensions (insert drawings front, side and ba ck Weight Burner power Natural gas LP gas Auxiliary 3730 BTU/h 3750 BTU/h Semi ‐ rapid 6000 BTU/h 6300 BTU /h Rapid 10400 BTU/h 1140 ...
-
Bertazzoni PRO30 4 GAS NE - page 7
7 BEFORE INSTALLATION This appliance shall only be installed by an authorized professional. This appliance shall be installed in accordance with the manufacturer’s installation instructions. This appliance must be installed in ? ...
-
Bertazzoni PRO30 4 GAS NE - page 8
8 INSTALLING THE LEGS Bertazzoni ranges must be used only with the legs properly installed. Four height ‐ adjustab le legs are shipped with the range in the polysterene container situated over the appliance. Before installin ...
-
Bertazzoni PRO30 4 GAS NE - page 9
9 INSTALLING THE BACKGUARD The backguard must be installed prior to operation of the appliance for appropriate ventilation of the oven compartment. The supplied backguard is a 2 ‐ part assembly. The box also contains ...
-
Bertazzoni PRO30 4 GAS NE - page 10
10 INSTALLING THE ANTI ‐ TIP STABILlTY DEVICE The anti ‐ tip bracket shipped with the range must be properly secu red to the rear wall as sh own in the pircture below. The height of the bracket from the floor ? ...
-
Bertazzoni PRO30 4 GAS NE - page 11
11 INSTALLATION ADJACENT TO KITCHEN CABINETS This range may be installed directly adjacent to existing countertop high cabinets (36" or 91.5 cm from the floor). For the best look, the worktop should be level ? ...
-
Bertazzoni PRO30 4 GAS NE - page 12
12 ELECTRICAL CONNECTION This unit is manufactured for a polarized, grounded 120 volt/60 Hz, 16 amp system. Electric power consumption is about 150 W. The minimum of 102 VAC is required for proper operation of ? ...
-
Bertazzoni PRO30 4 GAS NE - page 13
13 GAS CONNECTION All gas connections must comply with national and local codes. The gas supply line (service) must be the same size or greater than the inlet line of the appliance. This range uses a 1/2" ...
-
Bertazzoni PRO30 4 GAS NE - page 14
14 PRESSURE REGULATOR Since service pressure may fluctuate with local demand, every gas cooking appliance must be equipped with a pressure regulator on the incoming service line for safe and efficient operation. The ...
-
Bertazzoni PRO30 4 GAS NE - page 15
15 GAS CONVERSION WARNING! Before carrying out this operation, disconnect the appliance from gas and electricity. Gas conversion shall be conducted by a fac tory ‐ trained profession al. Call the customer service hotline to ...
-
Bertazzoni PRO30 4 GAS NE - page 16
16 STEP 2: SURFACE BURNERS To replace the nozzles of the surface burners, lift up the burners and unscrew the nozzles shipped with the range using a 7 mm {sochet wrench). Replace nozzles using the conversion ...
-
Bertazzoni PRO30 4 GAS NE - page 17
17 Unscrew the nozzle located inside the gas fitting using a 7 mm [ socket wrench]. Replace the nozzle using the conve rsion set supplied with the range or by a Bertazzoni authorized parts warehouse. ...
-
Bertazzoni PRO30 4 GAS NE - page 18
18 STEP 5: VISUAL CHE CKS Before reinstalling the bottom pane l, the following visual check must be performed to ensure that the conversion has been carried out properly and without damage to other components of the ? ...
-
Bertazzoni PRO30 4 GAS NE - page 19
19 STEP 6: MINIMUM FLAME ADJUSTMENT WARNING! These adjustments should be made only for use of the appliance with natural gas. For use with liquid propane gas, the choke screw must be fully turned in a clock ...
-
Bertazzoni PRO30 4 GAS NE - page 20
20 Models PRO30 4 GAS X [ M7S0GNU7X (2,5)A] Models PRO30 4 GAS AR [ M7S0GNU7S (2,5)A] Models PRO30 4 GAS BI [ M7S0GNU7W (2,5)A] Models PRO30 4 GAS NE M7S0GNU7N (2,5)A] Models PRO30 4 GAS RO [ M7S0GNU7R (2,5)A] Models PRO30 4 GAS VI [ M7S0GNU7L (2,5 ...
-
Bertazzoni PRO30 4 GAS NE - page 21
21 INSTALLATION CHECKLlST 1. Is the range mounted on its legs? 2. Is the backguard securely connected? 3. Has the anti ‐ tip device been properly installed? 4. Does the clearance from the side cabinets comply with the manufa ...
-
Bertazzoni PRO30 4 GAS NE - page 22
22 USER MANUAL WARNING! Do not to cover the holes ins ide the oven with aluminium foil. Do not to cover the worktop with aluminium foil. Do not store any flammable object or objects under pressure in the ...
-
Bertazzoni PRO30 4 GAS NE - page 23
23 SURFACE COOKING SYMBOLS (**) Burner position (in this case front right burner). Maximum temperature setting / Recommended control knob position for burner ignition Minimum temperatur e setting ...
-
Bertazzoni PRO30 4 GAS NE - page 24
24 TIPS FOR USING BURNERS CORRECTLY WARNING ! KEEP CHILDRE N AT A SAFE DISTANCE FROM THE APPLIANCE DURING OPERATION. DO NOT ALLOW CHILDREN TO OPERATE THE APPLIANCE. 1. Always check that the burner caps are properly ...
-
Bertazzoni PRO30 4 GAS NE - page 25
25 OVEN COOKING SYMBOLS (**) Thermal bake selector Broiler selector Recommended control knob position for burner ignition 270F Mimimum oven temperature setting 500F Maximum oven temperature setting Oven on/off Ove ...
-
Bertazzoni PRO30 4 GAS NE - page 26
26 GAS OVEN OPER ATION THERMOCOUPLE SAFETY VALVE Bertazzoni gas ovens are equipped with a thermocouple safety device and a thermostat to set the proper cooking temperature. The thermocouple opens the flow of gas to ...
-
Bertazzoni PRO30 4 GAS NE - page 27
27 CONVECTION COOKING Bertazzoni gas oven are equipped with a CONVECTION fan. In convection mode, the fan situated at the back of the oven compartment creates horizontal forced ‐ air circulation. The advantages of convect ...
-
Bertazzoni PRO30 4 GAS NE - page 28
28 MAINTAINING YOUR RANGE REPLACING THE OVEN LIGHT BULB WARNING! Disconnect power befo re servicing unit. To replace the oven light bulb, unscrew the protection cap that projects out inside the oven. Spare bulbs ...
-
Bertazzoni PRO30 4 GAS NE - page 29
29 opposite making with the same orientation that has been disassembled, remembering that the smooth part both in vista and the remains inside the screen ‐ printed glass oven door. Once you have reassembled the glass ...
-
Bertazzoni PRO30 4 GAS NE - page 30
30 IMPORTANT APPLIANCE INFORMATION MODEL ___________ ___________________ ______________________ __________ DATE INSTALLED ___________ ___________________ ______________________ ___________ DEALER _______________ ______________________ __________________ ________ ? ...
-
Bertazzoni PRO30 4 GAS NE - page 31
31 BERTAZZONI SpA Via Palazzina 8 42016 Guastalla RE ITALY WWW.BERTAZZONI.COM ...
Hai una domanda su Bertazzoni PRO30 4 GAS NE?
Utilizza il modulo sottostante
Se non hai risolto il problema con Bertazzoni PRO30 4 GAS NE con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Bertazzoni PRO30 4 GAS NE è probabile che voglia condividere il modo di risolverlo.