Manuale per l’uso Bloomfield WFAE-55F

36 pagine 0.68 mb
Scarica

Vai alla pagina of 36

Summary
  • Bloomfield WFAE-55F - page 1

    WELLS MANUF ACTURING COMP ANY 2 ERIK CIRCLE, P . O. Box 280 V erdi, NV 89439 telephone: fax: 888-492-2783 www .wellsbloomfield.com 888-492-2782 PRINTED IN UNITED ST A TES OF AMERICA IMPORTANT: DO NOT DI SCARD THIS MANUAL This manual is considered to be part of the appli ance and is to be given to the OWNER or MANAGER of the restaurant, or to the pe ...

  • Bloomfield WFAE-55F - page 2

    Unless otherwise specified, all commercial cooking equip- ment manufactured by WELLS MFG. CO. is warranted against defects in materials and workmanship for a period of one year from the date of original installation or 18 months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser only. ...

  • Bloomfield WFAE-55F - page 3

    W A R R A N T Y x i SPECIFICATIONS 1 WFAE-55F FEATURES & OPERATING CONTROLS 2 WFAE-55FS FEATURES & OPERATING CONTROLS 4 PRECAUTIONS & GENERAL INFORMATION 6 AGENCY LISTING INFORMATION 7 I N S T A L L A T I O N 8 PREPARATION PRIOR TO OPERATION 10 OPERATION WFAE-55F (MANUAL CONTROLS) 15 WFAE-55FS (SOLID STATE CONTROLS) 16 O P T I O N A L F ...

  • Bloomfield WFAE-55F - page 4

    FEATURES & OPERATING CONTROLS 2 1 POWER SWITCH (FRYER-OFF-FILTER) FRYER position energizes the FRYER and POWE R LIGHT; de-energizes FILTER PUM P . HEATING ELEMENTS energized and regulate to setting on CO NTROL T H ERMOSTAT (8). OFF position de-energi zed FRYER and FILTER PUMP. FILTER position de-energizes FRYER; e nergizes FILTER PUMP SWITCH (6 ...

  • Bloomfield WFAE-55F - page 5

    FEATURES & OPERATING CONTROLS (continued) 3 9 HI-LIMIT THERMOSTAT Provides over-temperature protection by de-e ne r gizing HEATING ELEMENTS should oil temperature exceed factory pre - set limits. 10 TEMPERATURE CONTROL THERMOSTAT Controls oil temperature. Range: 250ºF (121ºC) 375ºF (191ºC) 11 DRAIN VALVE LEVER Opens and closes the DRAIN VAL ...

  • Bloomfield WFAE-55F - page 6

    FEATURES & OPERATING CONTROLS 4 Fig. 1 WFAE-55FS Features & Operating Controls BACK VIEW FRONT VIEW LOWER CONTROL P ANEL RESET HI-LIMIT UPPER CONTROL P ANEL 8 3 4 5 WELLS 2 6 7 12 3 4 56 7 TIME TEMP HEAT READY MANUAL MANUAL PAUSE CLEAN ST ANDBY BASKET FILTER FRYER OFF FILTER 1 9 10 13 15 12 11 20 18 16 14 17 19 1 POWER SWITCH (FRYER-OFF-FIL ...

  • Bloomfield WFAE-55F - page 7

    FEATURES & OPERATING CONTROLS (continued) 5 W ARNING: FIRE HAZARD / HOT OIL The HI-LIMIT THERMOST A T is a FIRE PROTECTION DEVICE. If tripping persists, clean debris from the space between the hi-limit bulb and the element to enhance oil flow and facilitate reset. Otherwise, contact your authorized Wells Service Agent for repairs. DO NOT A TTEM ...

  • Bloomfield WFAE-55F - page 8

    This appliance is intended for use in commercial establishments only. This appliance is intended to prepare food for human consumpti on. No other use is recommended or autho rized by the manufacturer or its agents. DO NOT open any panel that require s the use of tools for access. Live electric circuits may be expose d by open ing such panels. Openi ...

  • Bloomfield WFAE-55F - page 9

    AGENCY LISTING INFORMATION 7 This appliance conforms to NSF Standard 4 for sanitation only if installed in accordance with the supplie d Installation Instructions and maintained according to the in structions in this manual. Domestic fryers are and listed under UL File E6070 for 208V and 240V. Export (European) fryers comply with standards for 380- ...

  • Bloomfield WFAE-55F - page 10

    INSTALLATION NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation. Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual. WARNING: Fire Hazard Do not store gasoline or any other flammable or combustible material near this ap ...

  • Bloomfield WFAE-55F - page 11

    ELECTRICAL INSTALLATION Refer to the nameplate on the front of the fryer and to the specifications listed on page 1 of this manual. Verify that electric service voltage, phase and amperage cap acity meet or exceed these specifications. Field wiring must be no less than 4 ga. solid copper wire, rated for at lease 90ºC. Fryers are shipped from the f ...

  • Bloomfield WFAE-55F - page 12

    PREPARATION PRIOR TO OPERATION 10 Press POWER SWITCH OFF . Close DRAIN VALVE (lever horizontal). Fill FRYPOT with 4 gallons of cold water. Press POWER SWITCH to FRYER . When water comes to a full boil, press POWER SWIT CH OFF . When boiling ceases, slowly add and stir in the LOW FOAMING COMMERCIAL FRYER CLEANSER. Using the HIGH TEMPERATURE BRUSH su ...

  • Bloomfield WFAE-55F - page 13

    PREPARATION PRIOR TO OPERATION (continued) 11 Press POWER SWITCH OFF . Close DRAIN VALVE (lever horizontal). Fill FRYPOT with 4 gallons of cold water. Press POWER SWITCH to FRYER . Wait 10 seconds, then press and hol d CLEAN but t on for six seconds. A beep will sound and readout will displ ay “BOIL”. Slowly add and stir in the LOW FOAMING COMM ...

  • Bloomfield WFAE-55F - page 14

    PREPARATION PRIOR TO OPERATION (continued) 12 Examine the CRADLE ROLLERS. Adjust or tighten as required. Lubricate the rollers with vegetable oil. DO NOT operate the fryer unless CRA DLE ROLLERS are in place and rotating freely. Install LIFT CRADLE onto CRA DLE PIVOT. Set FRY BASKET on LIFT CRADLE. Install FILTER LEAF into FILTER RESERVOIR. SUCTION ...

  • Bloomfield WFAE-55F - page 15

    PREPARATION PRIOR TO OPERATION (continued) 13 FOR FRYERS WITH VENT HOOD (WVAE-55…..) For Ventilator Hood models (i.e. WVAE-55 FS), install DRIP PAN (item 18) into mounting bracket behind fryer door at lower right front of fryer. Close DRAIN VALVE LEVER (item 11) by turning the lever up to the horizontal ( CLOSED ) position. IMPORTANT : Remember t ...

  • Bloomfield WFAE-55F - page 16

    PREPARATION PRIOR TO OPERATION (continued) 14 Check operation of FRYER and all CO NTROLS. WFAE-55F: See page 15 WFAE-55FS: See page 16 WFAE-55FS w/solid shortening melt option: See page zzzz DETERMIN E MAXIMUM L OAD W EIGHT: For operational safety, it is very important to determine the maximum load weight for the specific operation. This can be acc ...

  • Bloomfield WFAE-55F - page 17

    OPERATION - WFAE-55F (MANUAL CONTROLS) 15 PRE-HEATING FRYER Make sure FRYPOT is filled with 55 LB. of cooking o il. Open door and set THERM OSTAT (item 10) to de sired cooking temperature. CLOSE THE DOOR. Set POWER SWITCH (item 1) to FRYER . POWER LIGHT (item 2) and HEAT LIGHT (item 3) will glow. HEAT LIGHT wil l cycle on and off with the HEATING E ...

  • Bloomfield WFAE-55F - page 18

    OPERATION - WFAE-55FS (SOLID STATE CONTROLS) 16 PROGRAMMING KEY FUNCTI ONS As each control panel key is pressed, a “beep” will sou nd. Illuminated indicator light for each key will light whenever that ke y is pre ssed, and any time the function associated with that key is active. FRYER - OFF - FILTER switch (item 1) allows the fryer to be place ...

  • Bloomfield WFAE-55F - page 19

    363 30007 OpM anual for WFAE-55F /FS Electric Fryer OPERATION - WFAE-55FS (continued) 17 PROGRAM MENU TIMES AND TEM PERATURES For solid shortening melt optioned fr y ers , make sure elements are packed with 55 pounds of solid shorteni ng. For all other fr yers, make sure FRYPOT is filled with room temperature liqui d shorteni ng to the COLD OIL LEV ...

  • Bloomfield WFAE-55F - page 20

    USING FUNCTION KEYS PAUSE Halts time countdown while any menu is running and readout displays time remaining. • Purpose: Allows the user to raise fry bask et to inspect product in the middle of a cook cycle. Time rema ining is frozen until PAUSE key is pressed again. • To use: While a menu is running, press and hold PAUSE key for five seconds, ...

  • Bloomfield WFAE-55F - page 21

    OPERATION - WFAE-55F (MANUAL CONTROLS) 19 PRE-HEAT THE FRYER Press any MENU key. If oil temperature has not reached programmed temperature, readout will display “ Pre -” “ HEAt ”, followed by the menu key #, and HEAT indicator will light. When oil has reached programmed temperature, READY indicator will light, a “beep” will sound five t ...

  • Bloomfield WFAE-55F - page 22

    OPTIONAL OIL WAND WASH OUT FRYPOT or DISCARD OIL 1. If discarding oil, be sure a suitable hot oil disposal co ntainer is available. Otherwise, prepare filter reservoir pa n for filtering (see page 25). 2. Turn DRAIN VALVE HANDLE vertical to open the dr ain and fill filter reservoir. 3. Connect wand (female) fitting to the fryer (male) fitting: a. S ...

  • Bloomfield WFAE-55F - page 23

    OPTIONAL OIL WAND RETURN FRYER TO NORMAL OPERATION 1. After washing down frypot, turn DRAIN VALVE HANDLE horizontal to close the frypot drain. IMPORTANT: Drain handle must be fully closed in order to activate HEATER SAFETY SWITCH. Drain handle must be horizontal before for frye r heating element can be energized. 2. At conclusion of use, pre ss FRY ...

  • Bloomfield WFAE-55F - page 24

    CLEANING INSTRUCTIONS 22 122 306626 OpM anual for HDG-Series Griddle s 122 306626 OpM anual for HDG-Series Griddle s DANGER: BURN HAZARD Contact with hot oil will cause severe burns. Allow the fryer to cool before cleaning. Always wear protective clothing and heat resi stant gloves when cleaning the fryer. PREPARATION Press POWER SWITCH to OFF Allo ...

  • Bloomfield WFAE-55F - page 25

    363 30007 OpM anual for WFAE-55F /FS Electric Fryer 23 CLEANING INSTRUCTIONS (continued) PREPARATION Drain oil from fryer before cleaning FREQUENCY Monthly, or as needed TOOLS Low-foaming commercial fryer cleanser Metal disposal container Press POWER SWITCH OFF . Close DRAIN VALVE (lever horizontal). Fill FRYPOT with 4 gallons of cold water. Press ...

  • Bloomfield WFAE-55F - page 26

    363 300007 OpManual for WFAE-50F/FS Electric Fryer 24 CLEANING INSTRUCTIONS (continued) PREPARATION Drain oil from fryer before cleaning FREQUENCY Monthly, or as needed TOOLS Low-foaming commercial fryer cleanser Metal disposal container Press POWER SWITCH OFF . Close DRAIN VALVE (lever horizontal). Fill FRYPOT with 4 gallons of cold water. Press P ...

  • Bloomfield WFAE-55F - page 27

    363 30007 OpM anual for WFAE-55F /FS Electric Fryer MAINTENANCE INSTRUCTIONS - FILTER SYSTEM 25 IMPORTANT: Make sure all oil is pumped into FRYPOT before removing reserv oir. NOTE: When prop erly assemb led, handle will point away from suction tube on BOTTOM SCREEN. NOTE: Inspect the “O” RING on FILTER SUCTION TUBE for damage. Replace “O” r ...

  • Bloomfield WFAE-55F - page 28

    MAINTENANCE - FILTER SYSTEM (continued) 26 NOTE: Oil should be at least 300ºF (149ºC) DO NOT attempt to filter cold oil. DO NOT attempt to pump oil when less than 300ºF. Cold oil will not pass through the filter paper. Filtering cold oil will re su lt in the premature failure of the filter pump. Damage as a result of pumping cold oil IS NOT COVE ...

  • Bloomfield WFAE-55F - page 29

    363 30007 OpM anual for WFAE-55F /FS Electric Fryer MAINTENANCE - FILTER SYSTEM (continued) 27 Carefully and slowly add the contents of one package of FILTER POWDER to the oil in the frypot. Sprinkle filter powder onto surfa ce of the oil at point where it is being drawn down the drain. Brush down sides and bottom of frypot using provide d hi-tempe ...

  • Bloomfield WFAE-55F - page 30

    MAINTENANCE - DISCARDING USED OIL 28 Press POWER SWITCH to OFF. Allow oil to cool to 120ºF (49ºC)or less before attempting to drain oil from fryer. Using suitable gloves, rem ove 1-1/ 4 NP T x 5-7/8” DRAIN PIPE from DRAIN VALVE. Store this item in a convenient pla c e. IMPORTANT NOTE: These instructions for discarding used oil may be disregarde ...

  • Bloomfield WFAE-55F - page 31

    363 30007 OpM anual for WFAE-55F /FS Electric Fryer MAINTENANCE - DISCARDING USED OIL (continued) 29 Screw provided 1-1/4 NPT STREET ELBOW into DRAIN VALVE. Position female end to point forward. Screw provided 1-1/4 NPT x 12” DRAIN PIPE into elbow. Hand tight is sufficient. Place a suitable METAL OIL DISPOSAL CONTAINER und er DRA IN PIPE. Slowly ...

  • Bloomfield WFAE-55F - page 32

    363 300007 OpManual for WFAE-50F/FS Electric Fryer MAINTENANCE INSTRUCTIONS - CRADLE LIFT 30 NOTE: Failure to keep the cradle lift screw properly l ubricated will result in premature wear of the brass lift nut Wear caused by lack of proper lubrication is NOT covered by warranty. Recommended frequ en cy is “as required”, and, at a minimum, every ...

  • Bloomfield WFAE-55F - page 33

    TROUBLESHOOTING - WFAE -55F (Manual Controls) 31 363 30007 OpM anual for WFAE-55F /FS Electric Fryer SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY Fryer will not heat Unit disconnected from electric power Reconnect to power Check/reset circuit breaker Temp control thermostat (item 10) not set Set thermostat to desired temperature Hi-Limit thermostat (ite ...

  • Bloomfield WFAE-55F - page 34

    TROUBLESHOOTING - WFAE-55F S (Solid State Controls) 32 363 300007 OpManual for WFAE-50F/FS Electric Fryer SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY Fryer will not heat Unit disconnected from electric power Reconnect to power Check/reset circuit breaker Menu temp not programmed or set too low Program menu key for desired temperature Hi-Limit thermosta ...

  • Bloomfield WFAE-55F - page 35

    DESCRIPTION PART NO. BRUSH, CLEANING HEATING ELEMENT 21647 FLAVOR-SAVER OIL FILTER POWDER (pk45) 22410 WAOC-1 MOBILE OIL DISPOSAL CADDY 22470 PADDLE, STIRRING CHICKEN 22515 BRUSH, CLEANING FRYPOT 22516 *FILTER WAND ASSY 23188 MOLYDISULFIDE LUBE (LOCAL PURCHASE) *NOTE: The filter wand assembly involv es a differe nt plumbing arrangement than standar ...

  • Bloomfield WFAE-55F - page 36

    Genuine Parts Protect - YOU - All - W ays SER VICE TRAINING - QUALITY SER VICE SER VICE TRAINING - QUALITY SERVICE CUSTOMER SA TISF ACTION CUSTOMER SA TISF ACTION WELLS Commercial Food Equipment Service Association Wells Manufacturing proudly supports CFESA Commercial Food Equipment Service Association WELLS MANUF ACTURING COMP ANY - Division of CA ...

Fabbricante Bloomfield Categoria Fryer

I documenti che otteniamo dal fabbricante del dispositivoBloomfield WFAE-55F possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Bloomfield
- manuali per l’uso WFAE-55F
- schede prodotto Bloomfield
- opuscoli
- o etichette energetiche Bloomfield WFAE-55F
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Bloomfield WFAE-55F.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Bloomfield WFAE-55F, manuali di manutenzione, brevi manuali o manuali utente Bloomfield WFAE-55F. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Bloomfield WFAE-55F.

Manuali per l’uso simili

Manuale completo del dispositivo Bloomfield WFAE-55F, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Bloomfield WFAE-55F dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Bloomfield WFAE-55F.

Il manuale per l’uso completo Bloomfield, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Bloomfield WFAE-55F - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Bloomfield WFAE-55F, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Bloomfield WFAE-55F che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Bloomfield WFAE-55F - che ci dovrebbe aiutare nei primi passi durante l'uso Bloomfield WFAE-55F
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Bloomfield WFAE-55F
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Bloomfield WFAE-55F in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Bloomfield WFAE-55F?

Utilizza il modulo sottostante

Se non hai risolto il problema con Bloomfield WFAE-55F con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Bloomfield WFAE-55F è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)