Italiano dropdown-ico

Manuale per l’uso Fisher PLC-XR70N

46 pagine 0.61 mb
Scarica

Vai alla pagina of 46

Summary
  • Fisher PLC-XR70N - page 1

    Owner's Man ual PLC-XR70N Multimedia Rear -Pr ojection Displa y MODEL ...

  • Fisher PLC-XR70N - page 2

    2 INFORMA TION T O THE USER NO TE : This equipment has been tested and f ound to comply with the limits for a Class A digital de vice, pursuant to P ar t 15 of FCC Rules. These limits are designed to pro vide reasonable protection against har mful interf erence when the equipment is operated in a commercial environment. This equipment generates , u ...

  • Fisher PLC-XR70N - page 3

    3 All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments not recommended by the manufacturer ...

  • Fisher PLC-XR70N - page 4

    4 T ABLE OF CONTENTS FEA TURES AND DESIGN 5 BEFORE OPERA TION 18 COMPUTER MODE 26 VIDEO MODE 34 SETTING 38 APPENDIX 39 INST ALLA TION 6 INSTALLING THE PROJECTOR 6 PREPARING THE REMOTE CONTROLS 8 NAME OF EACH PART OF THE PROJECTOR 10 CONNECTING TO THE AC POWER CORD 11 CONNECTING THE PR OJECT OR 12 TERMINALS OF THE PROJECTOR 12 CONNECTING TO THE COMP ...

  • Fisher PLC-XR70N - page 5

    5 FEA TURES AND DESIGN ...

  • Fisher PLC-XR70N - page 6

    6 INST ALLA TION 10cm (3.9") 20cm(7.8") 20cm (7.8") 10cm(3.9") 20cm (7.8") INST ALLING THE PR OJECT OR Contact the sales dealer and request to install this projector. For installing this appliance properly, technical services are required. Any person who is not familiar with technical terms and skills, should not attempt to ...

  • Fisher PLC-XR70N - page 7

    7 INST ALLA TION CA UTION FOR INST ALLA TION OF THE PROJECT OR When using or installing the projector, following attention should be taken: l We recommend to avoid dusty / smoky place for operating the projector. . When using under the dusty or smoky conditions, dust may accumulate on the LCD panel and Lens inside it, and may be projected on the sc ...

  • Fisher PLC-XR70N - page 8

    8 INST ALLA TION ...

  • Fisher PLC-XR70N - page 9

    9 INST ALLA TION Caution for handling batteries Install batteries properly to match the "+" and "–" marks inside the case. If batteries are installed or used incorrectly, it may cause liquid leak, explosion, injury, fire hazard, or pollution. To insure safe operation, please observe the following precautions: l Change two batt ...

  • Fisher PLC-XR70N - page 10

    10 INST ALLA TION Fr ont of the Pr ojector Rear of the Pr ojector NAME OF EA CH P ART OF THE PR OJECT OR PROJECTION SCREEN SPEAKERS FRONT TERMINAL STORAGE SPACES INDICATORS AND INFRARED REMOTE RECEIVER FRONT PANEL LOCK BOLT CASTER POWER CORD CONNECTOR REAR TERMINAL EXHAUST VENT Connect the AC Power Cord to this terminal. Refer to page 11 for instal ...

  • Fisher PLC-XR70N - page 11

    11 INST ALLA TION CONNECTING THE A C PO WER CORD This projector uses nominal input voltages of 100 ~ 120 V AC. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult a sales dealer or service station if you are not s ...

  • Fisher PLC-XR70N - page 12

    COMPUTER IN 2 COMPUTER IN 3 VIDEO IN 3 CONTROL PORT 2 CONTROL PORT 3 AUDIO 2 AUDIO 3 (STEREO) (STEREO) VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO L-AUDIO-R (MONO) 12 CONNECTING THE PR OJECT OR TERMINALS OF THE PR OJECT OR This projector has various kind of terminals to connect with peripheral equipment. Connect the projector with these equipment before turn ...

  • Fisher PLC-XR70N - page 13

    13 CONNECTING THE PR OJECT OR CA UTION When connecting the peripheral equipment to the projector, please observe the following precautions: l Be sure that the each equipment is turned off. l Connect the cable securely to the respective terminal. l When removing the cable, never pull the cord. Hold the plug of the cable and remove it. l When operati ...

  • Fisher PLC-XR70N - page 14

    14 CONNECTING THE PR OJECT OR COMPUTER IN 1 VIDEO IN 1 CONTROL PORT 1 AUDIO 1 (STEREO) S-VIDEO VIDEO/Y C/Cb(B-Y) Cr(R-Y) COMPUTER IN 2 COMPUTER IN 3 VIDEO IN 3 CONTROL PORT 2 CONTROL PORT 3 AUDIO 2 AUDIO 3 (STEREO) (STEREO) VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO L-AUDIO-R (MONO) R-AUDIO-L (MONO) FRONT TERMINAL REAR TERMINAL TERMINAL VGA CABLE (Supplied) ...

  • Fisher PLC-XR70N - page 15

    15 CONNECTING THE PR OJECT OR COMPUTER IN 1 VIDEO IN 1 CONTROL PORT 1 AUDIO 1 (STEREO) S-VIDEO VIDEO/Y C/Cb(B-Y) Cr(R-Y) ...

  • Fisher PLC-XR70N - page 16

    16 CONNECTING THE PR OJECT OR CONNECTING THE VIDEO EQUIPMENT VIDEO IN 3 CONTROL PORT 3 VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO L-AUDIO-R (MONO) COMPUTER IN 1 VIDEO IN 1 VIDEO IN 2 CONTROL PORT 1 AUDIO 1 (STEREO) S-VIDEO VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO VIDEO VIDEO(BNC) R/C JACK R-AUDIO-L (MONO) R-AUDIO-L (MONO) Refer to the figure below for connecting t ...

  • Fisher PLC-XR70N - page 17

    17 CONNECTING THE PR OJECT OR VIDEO IN 3 CONTROL PORT 3 VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO L-AUDIO-R (MONO) COMPUTER IN 1 VIDEO IN 1 VIDEO IN 2 CONTROL PORT 1 AUDIO 1 (STEREO) S-VIDEO VIDEO/Y C/Cb(B-Y) Cr(R-Y) R-AUDIO-L (MONO) S-VIDEO VIDEO VIDEO(BNC) R/C JACK R-AUDIO-L (MONO) Refer to the figure below to connect the component video output equipment ...

  • Fisher PLC-XR70N - page 18

    18 BEFORE OPERA TION CONTR OLS OF FR ONT P ANEL (Within Right Door) FINE SYNC VOLUME MODE MENU SELECT ON-OFF NORMAL SYSTEM + + - - SYSTEM BUTTON Used to select computer system in Computer mode, or color system in Video mode. (Refer to page 27, 35.) SELECT BUTTON Used to execute the item selected or to increase or decrease the values in certain item ...

  • Fisher PLC-XR70N - page 19

    19 BEFORE OPERA TION ...

  • Fisher PLC-XR70N - page 20

    Used to select source among Video 1 ~ 3. 20 BEFORE OPERA TION Wireless Remote Contr ol Unit VOLUME MUTE SYSTEM MENU P C FINE SYNC . ON-OFF NORMAL FREEZE VIDEO PC BUTTON Used to select source among Computer 1 ~ 3. FINE SYNC BUTTON Use to adjust fine sync. VIDEO BUTTON MENU BUTTON Used to activate the MENU operation. MUTE BUTTON Used to mute sound. S ...

  • Fisher PLC-XR70N - page 21

    21 BEFORE OPERA TION VOLUME FINE SYNC. P C SYSTEM MUTE MENU FREEZE NORMAL ON-OFF VIDEO SELECT PC BUTTON Used to select source among Computer 1 ~ 3. VIDEO BUTTON Used to select source among Video 1 ~ 3. MENU BUTTON Used to activate the MENU operation. SYSTEM BUTTON Used to select computer system in computer mode, or color system in video mode. POINT ...

  • Fisher PLC-XR70N - page 22

    22 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU Display ON-SCREEN MENU Press MENU button to display the ON-SCREEN MENU (MENU BAR). The red frame is the POINTER. Select the ITEM by pressing SELECT button. The dialog box of the ITEM appears. Move the POINTER (red frame) to the ITEM ICON that you want to select by pressin ...

  • Fisher PLC-XR70N - page 23

    23 BEFORE OPERA TION MENU B AR SYSTEM MENU Used to select a computer system. (Refer to P27) IMAGE MENU Used to adjust the computer image. [Fine sync. / Total dots / Contrast / Brightness] (Refer to P29) PC ADJUST MENU Used to adjust the parameters to match with the input signal format. (Refer to P28) SETTING MENU Used to set the Display Menu and to ...

  • Fisher PLC-XR70N - page 24

    24 B ASIC OPERA TION T urning on the Pr ojector Connect the projector's AC power cord into a wall outlet and turn the MAIN ON/OFF switch (located on the Front Control) to the ON position. The LAMP POWER indicator lights RED, and the READY indicator lights GREEN. Press the power ON/OFF button on the Remote Control Unit or on the projector to ON ...

  • Fisher PLC-XR70N - page 25

    25 B ASIC OPERA TION Sound Volume Adjustment Press the VOLUME (+/–) buttons (located on the Front Control or on the Remote Control Units) to adjust the volume. The Volume dialog box appears on the screen for a few seconds. (+) button to increase the volume, and (–) button decreasing. Sound Mute Setting Press the MUTE button on the Remote Contro ...

  • Fisher PLC-XR70N - page 26

    26 COMPUTER MODE SELECTING COMPUTER MODE Direct Operation Press the MODE button on the Front Control or the PC button on Remote Control Units. Select the Mode among Computer1 to Computer 3 corresponding with the input source. The display of "Computer 1," "Computer 2," "Computer 3," "Video 1," "Video 2,&q ...

  • Fisher PLC-XR70N - page 27

    27 COMPUTER MODE SELECTING COMPUTER SYSTEM A utomatic Multiscanning system This projector automatically adapt to most different types of computer based on VGA, SVGA or XGA (refer to "COMPATIBLE COMPUTER SPECIFICATION" on page 28). When selecting "Computer 1," "Computer 2," or "Computer 3", this projector beco ...

  • Fisher PLC-XR70N - page 28

    28 COMPUTER MODE PC ADJUSTMENT This Projector can automatically detect display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be detected by this projector. If this happens, the projector cannot reproduce a proper image and the ...

  • Fisher PLC-XR70N - page 29

    29 COMPUTER MODE COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 135 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 ´ 480 31.47 59.88 VGA 2 72 ...

  • Fisher PLC-XR70N - page 30

    30 COMPUTER MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT (REAR CLICK) button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to or of the item ...

  • Fisher PLC-XR70N - page 31

    31 COMPUTER MODE The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE and press the SELECT (REAR CLICK) button. Another dialog box AUTO IMAGE Menu will appear. Move ...

  • Fisher PLC-XR70N - page 32

    32 COMPUTER MODE PICTURE POSITION ADJUSTMENT The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select POSITION and press the SELECT (REAR CLICK) button. Another dialog box PICTURE POSITION Menu wil ...

  • Fisher PLC-XR70N - page 33

    33 COMPUTER MODE When "Panning" of the PICTURE SCREEN Menu is selected, the display of "Quit" is appearing on the screen. Press the POINT buttons to move the image vertically or horizontally. When pressing the SELECT button, the "Panning" mode is terminated and the ON-SCREEN Menu appears. To resize the picture image, s ...

  • Fisher PLC-XR70N - page 34

    Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT (REAR CLICK) button. Another dialog box VIDEO MODE Menu will appear. 34 VIDEO MODE SELECTING VIDEO MODE Direct Operation Press the MODE button on the Front Control or the VIDEO button on the Remote Control Units. Select ...

  • Fisher PLC-XR70N - page 35

    35 VIDEO MODE SELECTING COLOR SYSTEM Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SYSTEM and press the SELECT (REAR CLICK) button. Another dialog box VIDEO SYSTEM Menu will appear. (The display also appears by pressing the SYSTEM button on the Front Control or the Remote Control Units.) Pres ...

  • Fisher PLC-XR70N - page 36

    36 VIDEO MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT (REAR CLICK) button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to or of the item th ...

  • Fisher PLC-XR70N - page 37

    37 VIDEO MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the image in desirable size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT (REAR CLICK) button. Another dialog box PICTURE SCREEN ADJUSTMENT DI ...

  • Fisher PLC-XR70N - page 38

    38 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT (REAR CLICK) button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to set, and then press th ...

  • Fisher PLC-XR70N - page 39

    39 APPENDIX OPERA TING WIRELESS MOUSE installation The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for a PC. One Pointing Pad (POINT button) and two click buttons are used for wireless mouse operation. Wireless mouse is usable when PC mouse pointer is displayed on the screen. When the m ...

  • Fisher PLC-XR70N - page 40

    40 APPENDIX MOUSE/KEYBO ARD CONNECTION Connecting Mouse/K eyboar d to the Projector Connect the Mouse/Keyboard Cable(s) in the Storage Cabinet (left side) to your computer as the figure below. Be sure to connect the cable(s) corresponding with your computer. Connect a Mouse or a Keyboard to the Mouse/Keyboard Terminal on the Front Terminal. Be sure ...

  • Fisher PLC-XR70N - page 41

    41 APPENDIX MAINTENANCE TEMPERA TURE W ARNING INDICA T OR The TEMPERATURE WARNING Indicator flashes red when the internal temperature of the projector exceeds the normal temperature. The Indicator stops to flash when the temperature of the projector become normal. When the TEMPERATURE WARNING Indicator continues to flash, make sure the matters belo ...

  • Fisher PLC-XR70N - page 42

    42 APPENDIX LAMP REPLA CEMENT Indicator When the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. When the image become dark or the color of the image become unnatural, replacement of the Lamp is required. Turn off the projector and disconnect the AC plug. Allow the projector to cool for at least 45 minutes. Rem ...

  • Fisher PLC-XR70N - page 43

    43 APPENDIX TR OUBLESHOO TING Before calling your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment a s described in section "CONNECTING THE PROJECTOR" on pages 12 ~ 17. 2. Check cable connection. Verify that all computer, video and power cord are ...

  • Fisher PLC-XR70N - page 44

    44 APPENDIX SPECIFICA TIONS Rear -Pr ojection Displa y LCD Rear-Projection Display 1,024 ´ 768 dots 1.3" TFT Active Matrix type ´ 3 800 TV lines F = 2.5 / f = 23.7 mm UHP, 120watt type 70" (4 : 3) ~80kHz (H-sync.), ~100Hz (V-sync.) 6 color system (PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N) SXGA / XGA / SVGA / VGA / MAC Computer Inpu ...

  • Fisher PLC-XR70N - page 45

    45 APPENDIX Remote Contr ol T ransmitters AA Type ´ 2 5 m ( 16.4' ) / 60° Power Source Operating Range WIRED REMO TE CONTROL 56mm ´ 35mm ´ 193mm ( 2.2" ´ 1.4" ´ 7.6" ) 105 g ( 0.23 lbs ) ( including the batteries ) Dimensions (W ´ ´ H ´ ´ D) Net Weight AA Type ´ 2 5 m ( 16.4' ) / 60° Power Source Operating Range ...

  • Fisher PLC-XR70N - page 46

    1YEAR In order to obtain warranty service, the product must be delivered to and picked up from and Authorized Sanyo Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. the names and addresses of authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below. Subjec ...

Fabbricante Fisher Categoria Projection Television

I documenti che otteniamo dal fabbricante del dispositivoFisher PLC-XR70N possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Fisher
- manuali per l’uso PLC-XR70N
- schede prodotto Fisher
- opuscoli
- o etichette energetiche Fisher PLC-XR70N
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Fisher PLC-XR70N.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Fisher PLC-XR70N, manuali di manutenzione, brevi manuali o manuali utente Fisher PLC-XR70N. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Fisher PLC-XR70N.

Manuali per l’uso simili

Manuale completo del dispositivo Fisher PLC-XR70N, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Fisher PLC-XR70N dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Fisher PLC-XR70N.

Il manuale per l’uso completo Fisher, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Fisher PLC-XR70N - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Fisher PLC-XR70N, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Fisher PLC-XR70N che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Fisher PLC-XR70N - che ci dovrebbe aiutare nei primi passi durante l'uso Fisher PLC-XR70N
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Fisher PLC-XR70N
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Fisher PLC-XR70N in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Fisher PLC-XR70N?

Utilizza il modulo sottostante

Se non hai risolto il problema con Fisher PLC-XR70N con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Fisher PLC-XR70N è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)