Italiano dropdown-ico

Manuale per l’uso Furuno NX-700A/B

89 pagine 1.65 mb
Scarica

Vai alla pagina of 89

Summary
  • Furuno NX-700A/B - page 1

    NA VTEX RECEIVER NX-700A/B www .furuno.co.jp ...

  • Furuno NX-700A/B - page 2

    The paper used in this manual is elemental chlorine free. ・FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN Telephone : +81-(0)798-65-2111 Fax : +81-(0)798-65-4200 A : MAY 2005 Printed in Japan All rights reserved. D1 : MAY 21, 2007 Pub. No. OME-56490-D1 *00015280413* *00015280413* ( TATA ) NX-700A/B * 00015280 ...

  • Furuno NX-700A/B - page 3

    i IMPORT A N T NOTIC E • No par t of t his manual may be copied or r eproduced w it hout w rit ten permi ssi on. • If th i s manual is lost or w orn, cont act your deal er about repl ace ment. • T he content s of this manual and equi pment spe cifi cati ons are subjec t to change w it hout noti ce. • T he exampl e screens (or illust rat ion ...

  • Furuno NX-700A/B - page 4

    ii SAFETY INSTR UCTIONS WARNING Do not disassemble or modify the equipment. Fire, electrical shock or serious injury can result. Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire. Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service. Keep heater away from eq ...

  • Furuno NX-700A/B - page 5

    iii Do not open the equipment unless totally familiar with electrical circuits and service manual. Only qualified personnel should work inside the equipment. WARNING Turn off the power at the mains switch- board before beginning the installation. Fire, electrical shock or serious injury can result if the power is left on or is applied while the equ ...

  • Furuno NX-700A/B - page 6

    i v FOR WORD Congr atulat ions on y our choi ce of t he FURUNO NX -700A/B NA VT E X Rec eiver . We are c onfi dent that you wi ll enj o y many y ears of operati on wi th this f i ne piece of equi pment. For ov er 50 year s, Furuno E lect ric Comp any has enj oyed an en viable r eputat ion for qual ity and reli ability throughout the w orl d. Our ex ...

  • Furuno NX-700A/B - page 7

    v Fea tures NA VT EX (Navi gational T elex) i s a worl d w ide coast al tel ex broadcast ing sy stem. Coast al NA VT E X broadcasti ng st ati ons wi th specifi c I D’s transmi t Navigati onal w arni ngs. Meteor ologi cal w arn i ngs, Sear ch and Rescu e (SAR) infor mation and ot he r n avig at iona l info rm atio n fo r N A V TE X rec ei v er-e q ...

  • Furuno NX-700A/B - page 8

    vi T A BLE OF C ONT ENT S EQUIPMENT LISTS ........................................................................................... v iii SYSTEM CONFIGUR A TIONS .............................................................................. x 1. PRINCIPLE OF N A V T EX S YSTEM ............................................................... 1-1 1. ...

  • Furuno NX-700A/B - page 9

    vii MENU TREE.................................................................................................... AP-1 SPECIFICA TIONS ........................................................................................... SP-1 P A CKI NG LISTS ............................................................................................... A -1 ...

  • Furuno NX-700A/B - page 10

    viii EQUIPM ENT LISTS St a nda rd S u ppl y Na me T ype Code No. Qty Re marks NX -700A - w /pri nter Dis play Unit NX -700B - 1 w/o pr inte r Recei v er Uni t NX -7001 - 1 Antenn a Unit NX -7H - 1 CP08- 01810 000- 040-180 10 m cabl e, CP08- 0181 1 CP08- 01820 000- 040-210 20 m cabl e, CP08- 0181 1* CP08- 01870 000- 040-350 30 m cabl e, CP08- 0181 1 ...

  • Furuno NX-700A/B - page 11

    ix Optio nal Sup ply Na me T ype Code No. Qty Rema rks T hermal Paper T P058-30CL 000- 154-047 1 set F or NX -700A OP08- 19 004-515- 260 1 For NX -700A Fl ush M ount Kit OP08- 20 004-515- 270 1 For NX -700B AC-DC Pow er PR-24 0 000- 053-373 1 000- 041-174 1 10 m, w /connector 000- 041-175 1 20 m, w /connector 000- 041-176 1 30 m, w /connector 000- ...

  • Furuno NX-700A/B - page 12

    x SYSTEM CONFIGU RA T IONS P ower supply 12-24 VDC DISPLA Y UNIT NX-700B Rectifier PR-240 : Standard : Option : User supply DISPLA Y UNIT NX-700A RECEIVER UNIT NX-7001 P ower supply 100-115/ 200-230 V A C. 1 , 50/60 Hz Exter nal Alarm INS (Integrated Na vigation System) or Navigator or ANTENNA UNIT NX-7H Max. 100 m Max. 15 m Printer (NX-700B only) ...

  • Furuno NX-700A/B - page 13

    1-1 1. PRINCIP LE OF N A V TEX SYSTEM 1.1 How NA VTEX Works NA VT EX is an ac ronym m eaning Na v i gational T elex, and as it s name show s, it i s a ki nd of narrow band radio t elety pe s y stem f or sendi ng (by freque ncy s hift key ing) t ext mess ages express ed in a 7-uni t co de. T he diff erence is that a NA VT EX transm itt er transm its ...

  • Furuno NX-700A/B - page 14

    1. PRIN CIPLE OF NA VTEX SYSTEM 1-2 1.3 Mess age Format For aut omati c ident ific ation of messages, each mess age st art s w ith nine cont rol charact ers, cal led “ Header co des”. T he first fi ve characters are alw ays “ ZCZ C_“ and com mon to al l messages . T his par t is used for mess age sync hronizat ion. T he latter f our charact ...

  • Furuno NX-700A/B - page 15

    1. PRIN CIPLE OF NA VTEX SYSTEM 1-3 1.4 NA VTEX St ation Map ...

  • Furuno NX-700A/B - page 16

    1. PRIN CIPLE OF NA VTEX SYSTEM 1-4 1. 5 NA VTEX St ation Li st NA V area Co un try St a t i o n La titu de Lon git ude Fr eq. (kHz) Ar ea (nm) S t a t ion ID Br oadc a s t sc hed ule ( UT C) I B e l gium Oost end e 51 11 N 02 48 E 518 55 T 0310, 0 710, 1 110, 15 10, 1 910, 2310 Es t o n ia T alli nn 59 30 N 24 30 E 518 25 0 U 03 20, 0 720, 1 12 0, ...

  • Furuno NX-700A/B - page 17

    1. PRIN CIPLE OF NA VTEX SYSTEM 1-5 NA V area Co un try St a t i o n La titu de Lon git ude Fr eq. (kHz) Ar ea (nm) S t a t ion ID Br oadc a s t sc hed ule ( UT C) III Bulg a r ia V arna 43 04 N 27 46 E 518 350 J 01 30, 0 530, 09 30, 13 30, 173 0, 21 30 Cr oa t i a S p lit r adi o 43 30 N 16 29 E 51 8 85 Q 02 40, 0 640, 1040 , 1 440, 184 0, 22 40 C ...

  • Furuno NX-700A/B - page 18

    1. PRIN CIPLE OF NA VTEX SYSTEM 1-6 NA V area Co un try Sta t i o n La titu de Lon git ude Fr eq. (kHz) Ar ea (nm) S t a t ion ID Br oadc ast s ch edul e (UT C) IV C a n ada Labr ador 53 42 N 57 01 W 51 8 30 0 X 03 50, 0 750, 1 15 0, 155 0, 19 50, 235 0 518 300 T 03 10, 0 710, 11 10, 15 10, 1 910, 2310 Iq aluit, N U 63 43 N 68 33 W 490 30 0 S 03 00 ...

  • Furuno NX-700A/B - page 19

    1. PRIN CIPLE OF NA VTEX SYSTEM 1-7 NA V area Co un try Sta t i o n La titu de Lon git ude Fr eq. (kHz) Ar ea (nm) S t a t ion ID Br oadc a s t sc hed ule ( UT C) IX S a u di Ar abi a Jedd ah 21 23 N 39 10 E 51 8 39 0 H 07 05, 1 30 5, 19 05 Oman Musc at 23 36 N 58 30 E 518 270 M 02 00, 0 600, 1000 , 1 400, 180 0, 22 00 Pakis tan K a r a c hi 24 51 ...

  • Furuno NX-700A/B - page 20

    1. PRIN CIPLE OF NA VTEX SYSTEM 1-8 NA V area Co un try St at i o n La titude Longi tude Freq. (kHz) Ar ea (nm) S t a t ion ID Br oadc ast s ch edul e (UT C) X I V ietna m H o Chi M inh Ci ty 10 4 7 N 1 06 40 E 518 400 X 035 0, 07 50, 1 150 , 1550 , 195 0, 23 50 490 40 0 W 03 40, 154 0 Ha ipho ng 20 44 N 106 44 E 4209. 5 400 W 02 30, 0 630, 10 30, ...

  • Furuno NX-700A/B - page 21

    2-1 2. OPER A T ION 2.1 O perating Control s ENT MENU ESC DIM LIST PRINT T ur ns the pow er on/off. Opens the PRINT options. Opens the LIST options. Opens menu/Returns to the previous displa y . Cursor pad -Shifts the cursor and displa y . -Selects items on menus. Adjusts the panel and LCD dimmer . +: Raises the dimmer . - : Decreases the dimmer . ...

  • Furuno NX-700A/B - page 22

    2. OPERA TION 2-2 At t he defaul t sett ing, the equi pment func tions as bel ow; W h en t he result s of the chec k are OK, ALL ME S SA GE di splay f or 518 kHz appear s. Thi s screen show s all mess ages recei v e d in 518 kHz. Y ou can s w it ch 518 kHz (I nternati onal mess age) and 49 0 kHz (l ocal mes sage) to dis play . T he N X -700A is pre ...

  • Furuno NX-700A/B - page 23

    2. OPERA TION 2-3 2.4 Confirming the N ew M essag e W h en y ou recei ve a new message, do one of t he foll o w ing depen ding on message received. SA R (Search an d Rescu e) messag e 1. W he n an SAR m essag e is recei ved, t he audibl e al ert sounds an d det ail s for the SA R messa ge appear . Icon for SAR message I L1 2. Press any key other th ...

  • Furuno NX-700A/B - page 24

    2. OPERA TION 2-4 2.5 Sample Messag es Press ▲ or ▼ o n the cursor pa d to choos e a messag e, and then p ress the EN T key to show the det ail ed infor mati on for that me ssage. T he message li st and det ail ed message di splay s can be sw it ched by pressi ng the EN T key . ENT key Frequency (paragraph 2.9) Status icon (paragraph 2.14) Cate ...

  • Furuno NX-700A/B - page 25

    2. OPERA TION 2-5 2.6 Choosing t he Receiv e Mode T he NA V T E X menu al lows you t o select w hat st ati on to recei v e, autom atical ly , manu ally . T he Auto mode requi res na v i gati on da ta, and st ations are automat ical ly s elect ed according t o the di st ance betw een own s hip and NA V T EX st ati ons. If navigat ion dat a is not i ...

  • Furuno NX-700A/B - page 26

    2. OPERA TION 2-6 2.7 Choosing t he Local Frequen c y Y ou can choose 49 0 kHz or 4209. 5 kHz as t he local frequency on Auto or M anual mode. 1. Pr ess the ME NU/ESC k e y to sho w th e main me nu. 2. Pr ess ▲ or ▼ to c hoose NA VT EX, and t hen press the ENT key or ► . 3. Pr ess ▲ or ▼ to c hoose L ocal Chan nel, and then pr ess the ENT ...

  • Furuno NX-700A/B - page 27

    2. OPERA TION 2-7 1. Pr ess the ME NU/ESC k e y to sho w th e main me nu. 2. Pr ess ▲ or ▼ to choose NA VTEX (f o r Rcv Mask, INS Output Mask and Pri nter mas k) or Dis play ( f or User Sel ect S t ation & M sg), and then press the ENT key . 3. Pr ess ▲ or ▼ to ch oose “R cv Mask” . “I N S Outp ut Mas k”, “Pr inte r Mask ” o ...

  • Furuno NX-700A/B - page 28

    2. OPERA TION 2-8 2.9 S w itching th e Frequ enc y to Display W i th sh owi ng the messag e li st, you can sw itch the frequ ency to 518 kHz or 49 0 (or 420 9.5) kHz by pressi ng ◄ or ► key . 518 490 (4209) Press Sw itc h ing t he freq uency to di splay 2.10 A larm Messa ges T he sequence of e vent s when an al arm mes sag e is rec eived is as ...

  • Furuno NX-700A/B - page 29

    2. OPERA TION 2-9 2.1 1 Pr ocessing Mess ages Choos ing m essages to disp lay Y ou can choose w hich cat egory of mes sages to displ ay: A l l, Alarm, User Sel ected and Goo d messa ges. 1. W i th the mes sage l ist or det ail ed message sho w n , pres s the LIST key to show the l ist opt ions. All Messages Alar m Messages User Selected Messages Go ...

  • Furuno NX-700A/B - page 30

    2. OPERA TION 2-1 0 Prot ecting m essa ge from delet ing M essages are a utomati cal ly del eted from the memory under the f oll o w ing condi tions . -66 ho urs pas sed f rom the moment w hen receiv ed. -Ol der than No. 200 T o prevent a m essage f rom being del ete d, do the f oll o w s ; 1. Choose the m essage at the l ist di splay . 2. Press th ...

  • Furuno NX-700A/B - page 31

    2. OPERA TION 2-1 1 2.12 Pr inting Mess ages Recei v ed me ssag es can be pr inted aut omat ical ly or m anually , from t he built -in pri nter (NX -700A) or ex tern al pri nter (NX -700B). Prin tin g all messages d ispl ayed Al l messages ch osen on p ara graph 2. 1 1 can b e pri nted out. 1. Pr ess the PRIN T key wi th showi ng all messages. Prin ...

  • Furuno NX-700A/B - page 32

    2. OPERA TION 2-1 2 2.13 Editing th e NA VTEX St ation List M aximum 300 NA VT E X st ations can be regi ster ed into t he memory . Note : T o cancel edit ing of a NA V T E X s tati on, press t he MENU/ ESC key . T he messag e “Exi t wi thout savi ng?” appe ars. Cho ose “ Y es”, and then pr ess ENT key . Adding N A VT EX stat ion Y ou ma y ...

  • Furuno NX-700A/B - page 33

    2. OPERA TION 2-1 3 NavArea 1 Station Latitude 0 00'N Longitude 0 00'E 518kHz ID1: - ID2: - ID3: - 490kHz ID1: - ID2: - ID3: - 4209.5kHz ID1: - ID2: - ID3: - Range 400nm Sav e data ? Station Name NA V Area Latitude Longitude Station ID Ser tvice Area New addi ti on wi ndow 5. Confi rm that NavArea i s chose n, and the n press the ENT k ey ...

  • Furuno NX-700A/B - page 34

    2. OPERA TION 2-1 4 Editin g NA VT EX statio n Exi sti ng NA V T E X stati on may be edi ted as f ollow s: 1. Pr ess the ME NU/ESC k e y to sho w th e main me nu. 2. Pr ess ▲ or ▼ to c hoose Ser v i ce, an d then pres s the ENT ke y . 3. Pr ess ▲ or ▼ to c hoose Edi t S t ation Li st, and t hen press t he ENT key . 4. Pr ess ◄ or ► to c ...

  • Furuno NX-700A/B - page 35

    2. OPERA TION 2-1 5 Edit Delete 7. Pr ess ▲ or ▼ to c hoose D elet e, and then pr ess the ENT key . The m essage “D elet e st atio n?” ap pear s. 8. Pr ess ◄ to choos e “Y es”, and then press t he EN T ke y to close the e dit wi ndo w . 9. Pr ess the ME NU/ESC k ey sever al ti mes to cl os e t he menu. 2.14 Icons T he NX- 700 show s v ...

  • Furuno NX-700A/B - page 36

    2. OPERA TION 2-1 6 2.15 Mess ages List I n additi on to the mess age “Recei ved n ew loc al (int’l ) msg. ” the foll o w ing messag e-rel ated mess ages may appear on the displ a y . Mess age Meani ng Rem edy New me ss a g e received. Oldes t mess age delete d to free up m emor y . Appea rs w hen the ol dest messag e is deleted t o make sp a ...

  • Furuno NX-700A/B - page 37

    2. OPERA TION 2-1 7 2.16 O ther Functio ns T h i s paragr aph descr ibes t he variou s opti ons whi ch all o w y ou to set up your unit to sui t your needs. N A VT EX menu Item D esc ription Settin g M ask M ode Chooses t he recei ving mo de. (See par agraph 2. 6.) I NS, M anual Auto Rcv Mask* T urns Auto m ode on/of f. Of f, On Local Channel * Cho ...

  • Furuno NX-700A/B - page 38

    2. OPERA TION 2-1 8 Disp lay menu Item Des cription Set ting Sc ro lling Sel ect s the speed of s croll ing by pressing ▲ or ▼ . Slow: S croll s by one line. Fast : Scrol ls by hal f of screen. Skip s to $$: Scrol ls li ne by li ne in list di splay; Skip s to $$ positi on in det ailed display . Slow , Fast, Skip to $$ Font Size Sel ects the si ...

  • Furuno NX-700A/B - page 39

    2. OPERA TION 2-1 9 Servic e menu Item Des cription Set ting IN S I nput S peed Sel ect s the dat a transm issi on spee d at w hich t o input dat a from I N S. 4800, 9600, 19200, 38400 bps IN S Outp ut S peed Sel ect s the dat a transm issi on speed to out put dat a to the I NS. 4800, 9600, 19200, 38400 bps Print Header T urns the header ( Ow n shi ...

  • Furuno NX-700A/B - page 40

    2. OPERA TION 2-2 0 T h i s page i s intent ional ly lef t blank. ...

  • Furuno NX-700A/B - page 41

    3-1 3. M A INTEN A N CE & TROUBLESHOO TIN G T h i s chapter pr ovides i nformat ion nec essary for k eeping y our unit in good w orking order and reme dyi ng si mple probl ems. WARNING Do not open the equipment. Hazardous voltage which can cause electrical shock exists inside the equipment. Only qualified personnel should work inside the equipm ...

  • Furuno NX-700A/B - page 42

    3. MAINTENAN CE & TROUBLESH OOTING 3-2 3.2 Replace ment of Fuse, Batt ery and Thermal Paper Fuse T he fuse i ns i de the recei ver uni t protec ts the equipment from o vercurr ent or revers e pol arity . I f the fus e blows , cont act y our deal er about replacem ent. Name T ype Code No. Fuse F GM B 125V 2A PBF 000- 157-479- 10 WARNING Use the ...

  • Furuno NX-700A/B - page 43

    3. MAINTENAN CE & TROUBLESH OOTING 3-3 Ther mal p aper (NX- 700A onl y) W h en t he therm al p aper runs o ut compl etely , the messag e “Pri nter err or” (cente r of sc reen) and t he X ic on (at the ri ght-hand t op corner ) appe ar . Repl ace the paper as fol low s. Name T ype Code No. T hermal paper TP058- 30CL 000- 154-047 1. T urn of ...

  • Furuno NX-700A/B - page 44

    3. MAINTENAN CE & TROUBLESH OOTING 3-4 3.3 T roubleshootin g T h i s secti on provides s impl e troubl eshoot ing pr ocedures w hich the us er can fol low t o restore norm al operat ion. I f y ou cannot r estore norm al oper ation do n ot att empt to c heck insi de the uni t. An y t rouble sho uld be r eferred to a q uali fi ed techni ci an. If ...

  • Furuno NX-700A/B - page 45

    3. MAINTENAN CE & TROUBLESH OOTING 3-5 3.4 Diagnosti cs T he memory t est checks RO M, RAM, dat a port, battery , keyboard and L CD for prop er operat ion and di splay s program versio n numb ers. 1. Pr ess the ME NU/ESC k ey to open t he main m enu. 2. Pr ess ▼ to choos e Servi ce, and the n press t he ENT ke y . 3. Pr ess ▲ or ▼ to c ho ...

  • Furuno NX-700A/B - page 46

    3. MAINTENAN CE & TROUBLESH OOTING 3-6 8. W h en t he message “ Hit any key” appear s on th e screen, pres s any key (except key) to show the Rx t est sc reen. The alarm for r ecei ving moni tor s ounds while the Rx test is bei ng c onduc ted. Rx test 9. W h en t he message “ [ENT ] Fini sh” appears on the s creen, press any key or w ai ...

  • Furuno NX-700A/B - page 47

    4-1 4. INST A LL A T ION 4.1 D ispla y U nit T he displ a y unit can be i nst alled on a t abletop, on the o v er head, or in a p anel. Refer t o the outl ine draw ings at the back of thi s manu al f or inst all ation ins truct ions. W hen sel ecti ng a mount ing l ocati on, keep i n mind the f oll o w ing point s. • Locate t he uni t aw ay from ...

  • Furuno NX-700A/B - page 48

    4. INST ALLA TION 4-2 Flush m ounting T he displ a y unit can be i nst alled f lush mount ed in a cons ole or p anel by usi ng the opt ional flush m ount ki t. (Fo r NX-700A ) T ype: OP 08-19 Code No. : 004-515- 260 Name T ype Code No. Qty Remarks M ounting m etal 08-023- 1019 100-326- 960 1 Sel f-t apping s crew 5X20 000-802- 081 6 Hex. bol t M8x ...

  • Furuno NX-700A/B - page 49

    4. INST ALLA TION 4-3 4.2 R eceiver Unit Gene ral m ounting consi der ations • T he mounti ng locat ion shoul d be w e l l venti lated and dry . • T he unit can be mounted on bulkhea d or the de sk. • Secure t he maint enanc e spac e show n in drawi n g at the back of t his m anual for eas e of mai ntenance an d ser v i ce. • Comp ass safe ...

  • Furuno NX-700A/B - page 50

    4. INST ALLA TION 4-4 4.3 A ntenna Unit M ounting cons idera tions I nstal l the antenna u nit referri ng to t he antenna inst all ation diagr am at the bac k of t his manual . W hen s elect ing a mou nting l ocati on for t he antenna uni t, keep in mi nd the fol lowi ng point s: • Do not shor ten t he ante nna cabl e. • Do not i nst all t he a ...

  • Furuno NX-700A/B - page 51

    4. INST ALLA TION 4-5 4.4 Printer (NX-700B only ) Prep are the pri nter by loc ally as shown bel o w for t he NX-700B . -Seri al RS -232C -S er ial p rint er -Baud R ate: 960 0 bps -Char acter l ength: 8 bi t -Parity: N o -Fl o w control : X on/X off -32 char acter s/li ne or more 4.5 W iring Antenna cable 04S4168 10/20/30/40/50m DSUB25P-DSUB25P ca ...

  • Furuno NX-700A/B - page 52

    4. INST ALLA TION 4-6 Recei ver uni t Al l cables ar e gathered t o the recei ver uni t. Connect cables at insi de of t he recei ver uni t as show n below . DSUB25P-DSUB25P-3M cable (to Displa y unit) DPYC-2.5 (to ship's batter y) RCV Board 08P3227 TTYCS-1Q (to Navigator or INS ) DPYC-1.5 (to External alar m) Printer cable (to Printer , NX-700 ...

  • Furuno NX-700A/B - page 53

    4. INST ALLA TION 4-7 Fabri cate t hese cables as bel ow t o connect to the rec ei v er uni t. DP Y C-1 . 5 (For external alarm) 100 mm 5 mm Scrape the paint off the cab le where the cable contacts the cab le clamp . Vinyl sheath Soldering Vinyl wire 25 mm TT YCS- 1Q (For Nav i gator or I NS) 100 mm 5 mm Scrape the paint off the cab le where the ca ...

  • Furuno NX-700A/B - page 54

    4. INST ALLA TION 4-8 Antenna cable Be sure t o leave s ome slack in the c able for f uture ser vice and mai nten ance. Fo r RG-10/U Y , RG -214 cab le W h en usi ng the co axial cabl e, type RG -10/UY o r RG -214, att ach the FM - M P-7 conne ctor (s uppli ed as i nst allation mat erial ) or PL-25 9 (local supply ) as below . 1. Remo ve the she at ...

  • Furuno NX-700A/B - page 55

    4. INST ALLA TION 4-9 Ext ending ante nna ca ble lengt h W h en con necti ng tw o cables f or extensi on, use opti onal ext ension cabl e kit OP- 04-2. Code No. : 000- 041-174 ( 10 m), 000-041- 175 (2 0 m), 000-04 1-176 ( 30 m), 000- 041-177 (4 0 m), 000-041- 178 (50 m ) Name T ype Code No. Qty Remarks 005- 948-320 10 m w /connect ors 005- 948-330 ...

  • Furuno NX-700A/B - page 56

    4. INST ALLA TION 4-1 0 4.6 Setting of Printer Af ter t he connecti on compl etely , t he setting of print er should be do ne for NX -700B as show n below . (For NX -700A, use t he defaul t set ting as i s.) 1. Pr ess the key to turn t he power on. 2. Pr ess the ME NU key t o show t he main menu. Menu NA VTEX System Displa y Ser vice 3. Pr ess ▼ ...

  • Furuno NX-700A/B - page 57

    4. INST ALLA TION 4-1 1 4.7 D igit al Int erfaci ng T h i s equipment can recei v e n avigat ion dat a in I EC 61 162-1 Ed2/ 2 form at. Priority TIME ＆ DAT E ZDA L/L GNS > GGA > RMC > GLL SOG VT G > VB W > RMC ST W VH W > VBW COG VTG > R MC Input data se ntence descr iption GGA: GP S posit ion f ixing c ondition $--GGA,hhmmss ...

  • Furuno NX-700A/B - page 58

    4. INST ALLA TION 4-1 2 GLL: Latitude and longitude $--GLL,llll.lll,a,yyyyy.yyy,a,hhmmss.ss,A,a*hh<CR><LF> | | | | | | | | | | | | | | | +------- 6 | | | | | | +--------- 5 | | | | | +----------- 4 | | | | +---------------- 3 | | +------+----------------------- 2 +---+----------------------------------- 1 1. Latitude, N/S 2. Longitude, ...

  • Furuno NX-700A/B - page 59

    4. INST ALLA TION 4-1 3 NRM : NA VTEX receive r mask This command is used to manipulate the configuration masks that control which messages are stored, printed and sent to the INS por t of te NA VTEX receiver . $--NRM,x,x,hhhhhhh,hhhhhhh*hh<CR><LF> message type mask (SEE NO TE 4) transmitter cov erage area mask (SEE NO TE 3) frequency t ...

  • Furuno NX-700A/B - page 60

    4. INST ALLA TION 4-1 4 RMC : Re commen d Mini mum S pecifi c GNSS Dat a $--RMC ,hhmmss.ss,A,llll.lll,a,yyyyy .yyy ,a,x.x,x.x,xxxxxx,x.x,a,a*hh<CR><LF> | | | | | | | | | | | | | | | | | | | | | | | | | +--- 10 | | | | | | | | | | | +----- 9 | | | | | | | | | +--+------- 8 | | | | | | | | +--------------- 7 | | | | | | | +--------------- ...

  • Furuno NX-700A/B - page 61

    4. INST ALLA TION 4-1 5 ZDA: Tim e and da te $--ZDA,hhmmss.ss,xx,xx,xxxx,xx,xx*hh<CR><LF> | | | | | | | | | | | | | +--------- 7 | | | | | +----------- 6 | | | | +-------------- 5 | | | +------------------ 4 | | +---------------------- 3 | +------------------------- 2 +--------------------------------- 1 1. UTC 2. Day, 01 to 31(UTC) 3. ...

  • Furuno NX-700A/B - page 62

    4. INST ALLA TION 4-1 6 A C K: A c know ledge $--ACK,xxx*hh<CR><LF> | | | + ------------------------2 +-----------------------------1 1. Local alarm number(identifier) 2. Checksum GNS: $--GNS,hhmmss .ss,llll.lll,a,yyyyy .yyy ,a,c--c,xx,x.x,x.x,x.x,x.x,x.x*hh<CR><LF> | | | | | | | | | | | | | | | | | | | | | | | | | +--- 11 | ...

  • Furuno NX-700A/B - page 63

    4. INST ALLA TION 4-1 7 VHW : W ate r speed and headi ng $--VHW,x.x,T,x.x,M,x.x,N,x.x,K*hh<CR><LF> | | | | | | | | | | | | | | | | | +--------- 5 | | | | | | +--+----------- 4 | | | | +--+----------------- 3 | | +---+----------------------- 2 +---+----------------------------- 1 1. Heading, degrees true 2. Heading, degrees magnetic 3. S ...

  • Furuno NX-700A/B - page 64

    4. INST ALLA TION 4-1 8 VBW: Dual gr ound/w ater s peed $--VBW,x.x,x.x,A,x.x,x.x,A,x.x,A,x.x,A*hh<CR><LF> | | | | | | | | | | | | | | | | | | | | | +--- 11 | | | | | | | | | +----- 10 | | | | | | | | +-------- 9 | | | | | | | +----------- 8 | | | | | | +-------------- 7 | | | | | +----------------- 6 | | | | +-------------------- 5 | | ...

  • Furuno NX-700A/B - page 65

    4. INST ALLA TION 4-1 9 Ou tput data descri ptio n NRX : Ne w NA VTEX receiv ed mess age The NRX sentence is used to transf ar the contents of a received NA VTEX message from the NA VTEX receiver to another de vice. As the length of a single NA VTEX message may e xceed the number of characters permitted in a single sentence, many NRX sentences ma y ...

  • Furuno NX-700A/B - page 66

    4. INST ALLA TION 4-2 0 AL R: Set alarms $CRALR,hhmmss.ss ,xxx,A,A,c--c*hh<CR><LF> | | | | | | | | | | | +----------------- 6 | | | | +----------------- 5 | | | +-------------------- 4 | | +---------------------- 3 | +------------------------- 2 +--------------------------------- 1 1. Time of alar m condition change , UTC 2. Local alar ...

  • Furuno NX-700A/B - page 67

    A P-1 M ENU TREE MENU/ESC Key Mask Mode (INS, Manual ) Auto Rcv Mask (Off, On ) Local Channel ( 490kHz , 4209.5kHz) Rcv Mask INS Output Mask Printer Mask NA VTEX W arn Msg Alm ( Off , On) Signal Monitor ( Off , Int’l, Local) Key Beep (Off, On ) T ime Offset (-13:30 to +13:30, 0:00 ) Units ( nm, kt , km, km/h, mi, mi/h) Printer (None*, NX-700A , U ...

  • Furuno NX-700A/B - page 68

    FURUNO NX-700A/B SP - 1 E5649S01F- M SPECIF IC A TIONS OF NA V TEX RECE IVER NX -7 00A/ B 1 N AVTEX R ECEI VER 1.1 R eceivi ng f requenc y 518 k Hz an d 490 k Hz ( or 4209. 5 kH z), r eceiv e b oth freq uenci es sim ult aneously 1.2 M ode of r ecept ion F1B 1.3 Sen sitivity 2 μ V e.m .f . (50 ohm s), 4% error rate or less 1.4 Inp ut p rotect ion W ...

  • Furuno NX-700A/B - page 69

    FURUNO NX-700A/B SP - 2 E5649S01F- M 4 A NTE NNA UNIT 4.1 Anten na typ e N X-7H: H-fi eld antenna 4.2 Outp ut im pedanc e 50 ohm s 4.3 Pow er supp ly + 7 V to +9 V ( thru c o-ax cabl e) 5 INT ERF ACE 5.1 I nput dat a IEC6116 2-1, - 2 GGA, GLL, R MC, ZD A, ACK, GNS, VHW , VTG, VBW , N RM, CRQ, PFEC 5.2 Output dat a NRX, ALR , NRM 5.3 Al arm Norm al ...

  • Furuno NX-700A/B - page 70

    ＰＡＣＫＩＮＧ ＬＩＳＴ 08AW-X-9862 -4 NX-700A/NX-700A-HK/NX-700A-R N A M E O U T L I N E DESCR IP TION/CO D E № Q'TY 1/1 ユニット UNIT 指示部 DISPLAY UNIT NX-7 00-A/-HK /-R 000-040-342-00 1 ** 付属品 ACCESSORIES FP08-00800 感熱記録紙 RECORDING PAPER TP05 8-30CL 000-154-047-00 1 工事材料 INSTALLATION MATERIALS ...

  • Furuno NX-700A/B - page 71

    ＰＡＣＫＩＮＧ ＬＩＳＴ 08AW-X-9860 -3 NX-700B/NX-700B-HK/NX-700B-R N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1/1 ユニット U NIT 指示部 DISPLAY UNIT NX-700B/HK/R 000-1 52-663- 00 1 ** 工事材料 INSTALLATION MATERIALS CP08-01861 +ﾄﾗｽﾀｯﾋﾟﾝﾈｼﾞ 1ｼｭ SELF-TAPPING SCREW 5X20 SUS304 000-1 62-608 ...

  • Furuno NX-700A/B - page 72

    ＰＡＣＫＩＮＧ ＬＩＳＴ 08AW-X-9861 -2 NX-7001-AN*/BN*/-R N A M E O U T L I N E DESCR IP TION/CO D E № Q'TY 1/1 ユニット UNIT 受信部 RECEIVER UNIT NX-7 001-* 000-040-345-00 1 ** 受信部予備品 RECEIVER UNIT SPARE PARTS 予備品 SPARE PARTS SP08 -02101 004-514-370-00 1 SP08 -02101 004-515-290-00 工事材料 INSTALLAT ...

  • Furuno NX-700A/B - page 73

    ＰＡＣＫＩＮＧ ＬＩＳＴ 08AW-X-9859 -2 NX-7001-AA-*/BA* N A M E O U T L I N E DESCR IP TION/CO D E № Q'TY 1/1 ユニット UNIT 受信部 RECEIVER UNIT NX-7 001-* 000-040-345-00 1 ** 受信部予備品 RECEIVER UNIT SPARE PARTS 予備品 SPARE PARTS SP08 -02101 004-514-370-00 1 SP08 -02101 004-515-290-00 工事材料 INSTALLATIO ...

  • Furuno NX-700A/B - page 74

    ＰＡＣＫＩＮＧ ＬＩＳＴ 08AW-X-9852 -0 NX-7H-0-10/-10-HK,NX-7H-0-20/-20-HK N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1/1 ユニット UNIT ｱﾝﾃﾅ ANTENNA NX-7H* 000-040-214 1 ** 工事材料 INSTALLATION MATER IA LS CP0 8-01810/01820 工事材料 INSTALLATION MATERIALS CP08-01811 004-514-610 1 ｹｰﾌﾞﾙ組品 CAB ...

  • Furuno NX-700A/B - page 75

    CODE NO. 004-515-280-00 TYPE CP08-01861 略  図 OUTLINE 名  称 NAME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCR IPTIONS 1/1 -1 INST ALLATION MATERIAL S 工事材料表 08AW-X-9401 +ﾄﾗｽﾀｯﾋﾟﾝﾈｼﾞ 1種 SELF-TAPPING SCREW 5X20 SUS304 4 000-802-081-00 1 CODE NO. （略図の寸法は、参 ...

  • Furuno NX-700A/B - page 76

    CODE NO. 004-515-300-00 TYPE CP08-01863 略  図 OUTLI NE 名  称 NAME 数量 Q'TY 用途／備考 REMA RKS 番 号 NO. 型名／規格 DESCR IPTIONS 1/1 -3 INSTALLATION MATERIALS 工事材料表 08AW-X-9402 +ﾄﾗｽﾀｯﾋﾟﾝﾈｼﾞ 1ｼｭ SELF-TAPPING SCREW 5X20 SUS304 4 000-1 62-608- 10 1 CODE NO. 同軸ﾌﾟﾗｸﾞ ...

  • Furuno NX-700A/B - page 77

    CODE NO. 004-515-430-00 TYPE CP08-01864 略  図 OUTLI NE 名  称 NAME 数量 Q'TY 用途／備考 REMA RKS 番 号 NO. 型名／規格 DESCR IPTIONS 1/1 -3 INSTALLATION MATERIALS 工事材料表 08AW-X-9403 +ﾄﾗｽﾀｯﾋﾟﾝﾈｼﾞ 1ｼｭ SELF-TAPPING SCREW 5X20 SUS304 4 000-1 62-608- 10 1 CODE NO. 同軸ﾌﾟﾗｸﾞ ...

  • Furuno NX-700A/B - page 78

    CODE NO. TYPE 略  図 OUTLINE 名  称 NAME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCR IPTIONS 1/1 -1 INST ALLATION MATERIAL S 工事材料表 08AW-X-9407 NX-700A/B ｹｰﾌﾞﾙ組品 CABLE ASSY. 04S4168 *10M* 1 選択         TO BE SELECT 000-106-821 1 CODE NO. ｹｰﾌﾞﾙ組品 CABLE ...

  • Furuno NX-700A/B - page 79

    CODE NO. 004-514-610-00 TYPE CP08-01811 略  図 OUTLI NE 名  称 NAME 数量 Q'TY 用途／備考 REMA RKS 番 号 NO. 型名／規格 DESCR IPTIONS 1/1 -1 INSTALLATION MATERIALS 工事材料表 08AW-X-9404 絶縁ﾃｰﾌﾟ SELF-BONDING TAPE Uﾃｰﾌﾟ 0.5X19X5M 1 000-8 00-985- 00 1 CODE NO. Uﾃｰﾌﾟ 0.5X19X5M 000-1 65- ...

  • Furuno NX-700A/B - page 80

    CODE NO . 004-515-290-00 TYPE SP08-02101 ITEM NO. NAME OF PART OUTLINE DWG. NO. OR PER SET PER VES SPARE WORKING QUANTITY REMARKS/CODE NO. BOX NO. P SHIP NO. SPARE PARTS LIST FOR U S E SETS PER VESSEL -2 TYPE NO. 08AW-X-9301 1/1 ﾋｭｰｽﾞ FGMB 125V 2A PBF 1 FUSE 000-157-479-10 1 1/1 MFR'S NAME FURUNO ELECTRIC CO.,LTD. DWG NO. （略図? ...

  • Furuno NX-700A/B - page 81

    D-1 ...

  • Furuno NX-700A/B - page 82

    Y. Hatai D-2 ...

  • Furuno NX-700A/B - page 83

    D-3 ...

  • Furuno NX-700A/B - page 84

    D-4 ...

  • Furuno NX-700A/B - page 85

    Y. Hatai D-5 ...

  • Furuno NX-700A/B - page 86

    MASS DWG. No. SCALE APPROVED CHECKED DRAWN 6 5 4 3 2 1 D C B A D C B A 名称 NAME TITLE b) パイプのみを使 うとき コンベック ス (現地手 配） コンベッ クス (現地手 配） クランプ パーカー A)マストへ の取付け a)マス ト取付金具 CP20-01111( 工事材料)で マストに固 定する 。 MAST MO UNTI ...

  • Furuno NX-700A/B - page 87

    2 4 3 A 1 B C DRAWN CHECKED APPROVED DWG.No. MASS SCALE TITLE NAME 名称 INTERCONNE CTION DIAGRAM 相互結線図 ナブテックス受信機 NAVTEX RECE IVER NX-700A/B 08-001-3157-A *1. SHIPYARD SUPPLY. NOTE *2. OPTION. ＊１）造船所手配。 ＊２）オプション。 ＊３）プリンタ信号出力はメニューにて選 択。 *3. SEL ...

  • Furuno NX-700A/B - page 88

    IN-1 INDEX A Alar m mes sa ge ............................................. 2-9 C Co ntras t ...................................................... 2-18 D Da te............................................................ 2- 21 De f au lt Sett i n gs ............................................ 3-6 Diagnosti cs ...................................... ...

  • Furuno NX-700A/B - page 89

    FURUNO ELECTRIC CO., LTD. 9-52 Ashihara-Cho, Nishinomiya City, 662-8580, Hyogo, Japan Tel: +81 798-65-2111 Fax: +81 798-65-4200 Pub No. DOC-954 Declaration of conformity We FURUNO ELECTRIC CO., LTD. ---------------------------------------------------------------------------------------------------------------------- (Manufacturer) 9-52 Ashihara-Cho ...

Fabbricante Furuno Categoria Marine RADAR

I documenti che otteniamo dal fabbricante del dispositivoFuruno NX-700A/B possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Furuno
- manuali per l’uso NX-700A/B
- schede prodotto Furuno
- opuscoli
- o etichette energetiche Furuno NX-700A/B
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Furuno NX-700A/B.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Furuno NX-700A/B, manuali di manutenzione, brevi manuali o manuali utente Furuno NX-700A/B. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Furuno NX-700A/B.

Manuali per l’uso simili

Manuale completo del dispositivo Furuno NX-700A/B, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Furuno NX-700A/B dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Furuno NX-700A/B.

Il manuale per l’uso completo Furuno, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Furuno NX-700A/B - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Furuno NX-700A/B, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Furuno NX-700A/B che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Furuno NX-700A/B - che ci dovrebbe aiutare nei primi passi durante l'uso Furuno NX-700A/B
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Furuno NX-700A/B
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Furuno NX-700A/B in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Furuno NX-700A/B?

Utilizza il modulo sottostante

Se non hai risolto il problema con Furuno NX-700A/B con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Furuno NX-700A/B è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)