-
LOREX Technology DGN216 - page 1
Copyright © 2006 LOREX Technology Inc. MODEL: DGN216 16 CHANNEL MULTIPLEX DIGITAL VIDEO RECORDER Instruction Manual www.lorexcctv.com English Version1.0 ...
-
LOREX Technology DGN216 - page 2
1 Under the copyright la ws, this documentation may not be copied, photocopie d, reproduced, translated, or reduc ed to any electronic medium o r machine-readable form, in who l e or part without the prior written c onsent of Lorex Technologies Inc., except in the manne r described in the documentation. © Copyright 2006 Lorex Technologie s Inc. 30 ...
-
LOREX Technology DGN216 - page 3
2 Table of Contents Important Safety Instru ctions.................................................................................................. ...................................................... 4 Introduc tion .................................................................................................................................. ...
-
LOREX Technology DGN216 - page 4
3 Appendix 4: Rack M ount Insta llation ............................................................................................ .............................................. 49 Appendix 5: Recordi ng Times (i n Hour s).............................................................................................................................. ...
-
LOREX Technology DGN216 - page 5
4 Important Safety Instructions All the safety and operating instructions sho uld be read befo re operating this equipment. T he improper operation ma y cause irreparable damage to the a ppliance. Lift and place this equipm ent gently. Do not expose this equipment to direct sunlight. Do not use this equipment near water or in contact with water. Do ...
-
LOREX Technology DGN216 - page 6
5 Introduction The DXR216 combi nes a 16 channel multiplexer with a Digital Video Rec order (DVR). The DVR offers many advantages over traditiona l time lapse VCR’s, allo wing you to quickly access and search for a sp ecific time segment or event which has been recor ded. This high qualit y recorded video can be viewed at various playback speeds ...
-
LOREX Technology DGN216 - page 7
6 System Contents The DXR216 box s hould include the items listed bel ow. Please ta ke a moment to verify that no items are missing from the package. NOTE: KEEP THE KEYS IN A SAFE PLACE. THEY A RE NECESSARY FOR INSTALLATION / REMOVAL OF THE HARD DISK DRIVE. Getting Started If the purchased DVR model did not c ontain a hard disk drive, please refer ...
-
LOREX Technology DGN216 - page 8
7 Front Panel Controls 1. Removable Cartridge Casing The DXR216 comes with 2 removable hard disk drive cartridges. 2. MENU Press MENU to enter the Main Menu. You will be pr ompted for a password upon press ing the MENU button. 3. ENTER Press ENTER for confirmation when making selecti ons in the Menu mode. 4. ZOOM The ZOOM feature is used to enlarge ...
-
LOREX Technology DGN216 - page 9
8 13. REC Press REC to start recording. (The icon will appear in th e top-right corner of the screen when recording is in progress.) 14. REW / ◄ The REW / ◄ button has two functions: i. Pressing REW / ◄ plays video backwards at a high speed. Pressin g REW adjusts the speed from normal speed to 2X, 4X, 8X, 16X, 32X the normal speed. ii. In Men ...
-
LOREX Technology DGN216 - page 10
9 Back Panel 1. POWER INPUT Connects to the Power cord. 2. EXTERNAL I/O Connects to a PC for Remote Control via RS-232 or to an Alarm Block. (see appendi x 3 for more information) 3. 75/HI When using the LOOP function, allo ws for HI impedance or 75ohms. 4. LAN Connect DVR by LAN cable. 5. CALL Connects to the CALL monitor for real time sequencing. ...
-
LOREX Technology DGN216 - page 11
10 Accessing the Main Menu The Menu allows you to confi gure your DVR settings and p rogram various recording options. Follow these steps in order to access the Menu: Press the MENU button. The password screen will appear: The default Passw ord is 0000. To change the number of the Pass word, use the ◄ / ► buttons to scroll left and right betwee ...
-
LOREX Technology DGN216 - page 12
11 ► M 2002-JAN-01 01:02:03 M- HDD M 2002-JAN-01 01:02:03 M- HDD A 2002-JAN-01 01:02:03 M-HDD T 2002-JAN-01 01:02:03 M-HDD D 2002-JAN-01 01:02:03 S-HDD M 2002-JAN-01 01:02:03 S-HDD ◄ : Page Up ► : Page Down The following options are ava ilable in the Search Menu: Last Record This feature is used to play the last recorded piece of vid eo. 1. I ...
-
LOREX Technology DGN216 - page 13
12 Timer Recording Setup On the Main Menu, selecting the Timer optio n will allow you to set dail y schedules in which you would like the DVR to aut omatically record. Pressing ENTER after scrolling to the Timer option will bring up the following menu opti ons: Timer 1. Press ▲ / ▼ to select the day(s) to record on, the available o ptions are: ...
-
LOREX Technology DGN216 - page 14
13 Record Settings On the Main Menu, selecting the Record opti on wi ll allow you to set the qualit y and speed of recordings. Pressing ENTER after scrolling to the Record option will bring up the following m enu options: HDD Over write Setup: 1. Press ENTER to confirm HDD OVERWRITE setup. 2. Press ▲ / ▼ to choose HDD OVERWRITE. NO: When HDD fu ...
-
LOREX Technology DGN216 - page 15
14 Motion Trigger Record 1. Press ENTER to confirm MOTION TRIGGER RECORD setup. 2. Press ▲ / ▼ to toggle the option between ON and OFF. 1. Select “ ON ” to set up the motion trigger recording: It can automatic ally switch from stand-by mode to Re cording Mode. The motion detection will change the scanning se quence and sho w “D” on the ...
-
LOREX Technology DGN216 - page 16
15 Record Method This feature is used to select the DVR record method as either EVENT / NORMAL / OFF. 1. Press ▲ / ▼ to select the desired time camera channel (1-16), then press ENTER . 2. Press ◄ / ► to select the Record Method feature on the screen. 3. Press ▲ / ▼ to select EVENT / NORMAL / OFF on the screen. EVENT : When the alarm in ...
-
LOREX Technology DGN216 - page 17
16 Motion Detection Press MENU to enter the menu set up, then ▼ to CA MERA setup. Press ENTER twice to enter the Motion Detection setup. Each screen displays the current camera p i cture overlaid with the motion targets (as Figure 1 ). Pressing the ◄ / ► , ▲ / ▼ buttons will toggle the motion detection bet ween ON or OFF . The targets on ...
-
LOREX Technology DGN216 - page 18
17 Figure 1-1 MOTION DETECTION SETUP – 1~ 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 032 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Figure 1-2 MOTION DETECTION SETUP – LINE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 032 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Figure 1-3 MOTION DETECTION SETUP – ALL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 032 -- -- -- ...
-
LOREX Technology DGN216 - page 19
18 System Set Up The system menu is used to configure t he s ystem level options on the DXR216. To access the System features, press MENU followed by the 4-digit password. Use the ▲ / ▼ to scroll to the ‘System’ option and press ENTER . Error! Using the ▲ / ▼ buttons, scroll to the desired option and press ENTER to select it. Selecting ...
-
LOREX Technology DGN216 - page 20
19 4. Press ▲ / ▼ to move to another field on the System screen or press MENU to exit. Setting the Motion Audible Alarm feature If enabled, the buzzer will sound if the video motion de tect feature is set and motion is detected. 1. On the System screen, press ▲ / ▼ to select Motion Audible Alarm, then pr ess ENTER . 2. Press ▲ / ▼ to en ...
-
LOREX Technology DGN216 - page 21
20 2. Press ▲ / ▼ to choose a display format. Options are: Y-M-D = Year - Month - Day M-D-Y = Month - Day - Year D-M-Y = Day - Month - Year Off = The date and time will not show on the screen. 3. Press MENU to confirm your change. 4. Press ▲ / ▼ to move to another field on the System screen or press MENU to exit this screen and confirm the ...
-
LOREX Technology DGN216 - page 22
21 No = Do not reset the system at this time. 3. Press MENU to exit this screen and conf irm the current operatio n. 4. If you have completed all you r sy stem configuration changes, press MENU agai n to exit and close menu setup. NOTE : This will not affect the time and date settings. ...
-
LOREX Technology DGN216 - page 23
22 (Menu) Search Timer Record Camera Sy stem ► Event Network (Menu) Search Timer Record Camera Sy stem Event ► Network (Network) SERVER IP 192.168.001.010 GATEWAY 192.168.001.065 NET MASK 255.255.255.000 DNS 168.095.001.001 WEB PORT 0080 REST DEFAULT NO Event Log Vie wing To access the Event Log Viewing option, pr ess MENU followed by the 4-dig ...
-
LOREX Technology DGN216 - page 24
23 HDD Status – This will display eit her the remaining HDD c apacity in GB or OW to indicate that it is set to Overwrite. Video Loss - Screen w ill display if the video input is not connect ed properly. Recording Methods The DXR216 offers a variet y of flexible recording modes. The un it can be set up to record continually, follo wing a schedule ...
-
LOREX Technology DGN216 - page 25
24 Video Search The DVR allows you to easily find sections of recorded vide o using the Search feature. Press the SEARCH button and you will see the following opt ions: Last Record: Plays the last recorded piece of video. Full List: Shows a listing of all recorded video on the HDD, sorted b y time. Alarm List: Shows a listing of all recorded video ...
-
LOREX Technology DGN216 - page 26
25 Hardware Connection from DVR Static IP Setting 1. Put the attached CD into the CD-ROM. The application program will install on your PC. Note: The CD contains a self-running insta llation that automatically starts when the CD is inserted. Follow the instructions for in stallation as indicated in the next fe w pages. 2. Press “Next”. STEP 1: S ...
-
LOREX Technology DGN216 - page 27
26 3. Choose the destination loc ation and press “Next”. 4. Set the program shortcut setting and press “Next”. 5. Press “Next” to begin copying the files. ...
-
LOREX Technology DGN216 - page 28
27 6. After the installation, the following f iles listed belo w will appear in your assigned p ath or file folder. There will be 6 f iles and 1 folder. STEP 2: STATIC IP SETTING In the DVR MENU / NETWORK set the IP ADDRESS, GATEWAY, NET MASK, DNS and WEB POR T as provided from your local ISP ( internet service provider ). When all of the net work ...
-
LOREX Technology DGN216 - page 29
28 Dynamic IP Setting WHAT IS A DYNA MIC IP ADDRESS? A Dynamic IP Address is an IP (Internet Protocol) address that changes each time you connect to the internet. T his cuts down on the number of IP addresses large consum er provi ders need because no t all of their customers are using the service at an y given time. It also cuts down on bandwidth ...
-
LOREX Technology DGN216 - page 30
29 4. After registering your account, you will receive an e-mail, which contains instructions to activate yo ur account. If you do not follow these directions within 48 hours, yo u will need to re-register your account. 5. Login your account. 6. Click on “Account” and “Add Host”. 7. Users can set up their own DDNS HOST. For example, t he us ...
-
LOREX Technology DGN216 - page 31
30 2. Network setting for PC. (The instruction is based on Wi n XP O/S. If your O/S is Win 2000 or Win 2003, the setup procedure is similar to that of Win XP O/S.) 3. Click on “Properties” for TCP/IP setup. 4. Click on “INTERNET PROT OCOL (TCP/IP)” and then select “Properties” to setup. Cli ck t wice Loc al Area C onnec t ion Enabled R ...
-
LOREX Technology DGN216 - page 32
31 5. Choose “Obtain an IP address automatically”. 6. Enter the “Command Prompt”. 7. In the setting window, enter “ipconfig”, and write down the r outer’s gateway (e.g. 192.168.1.1) 8. Close the window above. Enter the IP add ress (router’s gate way: 192.168.1.1) to l og in to the router from the Internet Explorer. Enter the login w ...
-
LOREX Technology DGN216 - page 33
32 STEP 4: ROUTER SETTING (Please refer to your Router manual for t he configuration ) NOTE: In the router setting, ther e are four steps to follow. 1. Dial setting 2. DHCP setting 3. Virtual server setting 4. DDNS setting 1. Click on “INTERNET PORT” and choos e your WAN type (e.g. PPPoE). Enter your “User Name” and “ Password” to dial ...
-
LOREX Technology DGN216 - page 34
33 3. In the “ADVANCED SETUP / Virtual Server”. Choose “By Port” and set the “Port Number” to 80 for the Video Web Server. Set the “Local Server IP Address” to 192.168.1.10. (The default Video Web Server IP and port). Press add & save aft er you setup. 4. In the “ADVANCED SETUP / Dynamic DNS”, key in the “DNS Account”, ? ...
-
LOREX Technology DGN216 - page 35
34 STEP 7 : Connect to the DVR via the Internet 1. Change PC net work setting to the original setting and link PC to the internet . 2. Click twice and enter your User name, Pass w ord and host on the Video Web S erver. (Note: If you did not change the “Account”, the User Name and Password are both “admin”.) Click O K to connect. Example: Th ...
-
LOREX Technology DGN216 - page 36
35 Software Operation at the Remote Site Follow the steps below to connect to a remote site. (e.g. If yo u set up the server at your office with one static ADSL, you can remotely watch the video anywhere, with a networkable computer.) Step 1: Click tw ice to enter the Login setup (pleas e refer to “software installation”) Step 2: Key in “User ...
-
LOREX Technology DGN216 - page 37
36 Control Panel and Basic Operation A. Video Web Se rver control panel 1. Image transmission rate per second 2. Data transmission rate 3. Connection/Disconnection 4. Resolution: D1, CIF 5. Image quality: High, Middle , Low 6. Image adjusting: Brightness/ Contrast/ Saturation 7. Snapshot: press this button, to autom atically save the image on your ...
-
LOREX Technology DGN216 - page 38
37 B. Digital dev ice control panel 1. CH1-16 2. 1.4cut, 7cut, 9cut, 10cut, 13cut, 16cut, PIP 3. Zoom, Select, Lock, Record 4. Stop, Rewind, Fast Forward, Pause, Slow, Play 5. Menu (Exit), Left, Right, Up, Down 6. Enter 7. TURBO* Play Back Operation You will find the recorded file on the PC. Clic k twice to playback. * TURBO: Activate the turbo but ...
-
LOREX Technology DGN216 - page 39
38 Advanced Settings Click on “System Config” for advanced settin g. ACCOUN T AL AR M SYSTEM CONFIG NOTE : Apply-- After changing all settings, press “apply” to refresh the data. Reboot-- Press this button to restart setting. Set up the user’s account (Max 10 accounts), password and author ity (Max 5 accounts on line at the same time). 1. ...
-
LOREX Technology DGN216 - page 40
39 MA IL FTP FILE PATH When the alarm is triggered, the video serve r program will capture the inst ant picture and e-mail the captured image to the assigned reci pients. 1. Get all the data from the ISP company or by mailing it to the server supplier.(POP3/SMTP server) 2. Set the mail list which you want to send to when the alarm is triggered. 3. ...
-
LOREX Technology DGN216 - page 41
40 TOOL BOX ONLINE USER Connecting the Video Web Server Via the Internet Explorer Browser You can also connect to the Video Web Serv er via the Internet Explorer bro wser. This function is suitable for both WIN 2000 and WIN XP (WIN XP is preferable over W IN 2000) Step 1 : Enter the IP address that you want to connect to. (see example below) Upgrad ...
-
LOREX Technology DGN216 - page 42
41 Step 2: Enter your Username and Pass word to login to the Video Web S erver. Step 3 : Click on “YES” to confirm that the Download Application is authenti c and has been verified Note: If you would like to download the Vid eo Web Server Application you can do this b y clicking this button and savin g the file to your remote computer, and inst ...
-
LOREX Technology DGN216 - page 43
42 Step 4: After you login, you will see the Video Web Server screen (e xample below). Key Lock For added security, you can L ock the buttons on your DXR2 16. Lo cking disables the functiona lity of the buttons and prevents accidental key presses from altering the oper ation of the DXR216. To enable the Key Lock feature, press and hold the ENTER an ...
-
LOREX Technology DGN216 - page 44
43 Troubleshooting Check that the HDD has been install ed correctly. No recorded video Check camera’s video cables and co nnections. Check monitor’s video cables and conn ections. Make sure that the camera is receiving power. No video Check that Timer / Alarm Enable is set to YES. Timer / Alarm recording isn’t working Check if the system is i ...
-
LOREX Technology DGN216 - page 45
44 Technical Specifications Video format NTSC/EIA or PAL/CCIR Network Interface Ethernet (10100 Base-T) Protocols TCPIP, ICMP, SMTP, HTTP, FTP Triggers & Actions E-mail images or images uplo aded to FTP site / Remote recording HDD storage IDE type, UDMA 66 above, 1 removable HDD supported Record mode Manual / Alarm / Timer/Motion Trigger Camera ...
-
LOREX Technology DGN216 - page 46
45 Appendix 1: Inst alling the HDD NOTE: The HDD has the same purpose in a D XR216 as a videocasse tte does in a VCR. However, installing the HDD is a bit more complicated. Please foll ow the next steps ca refully in order to ensure proper i nstallation. The compartment (with the handle) loc ated on the front panel of the DXR216 is t he rem ovable ...
-
LOREX Technology DGN216 - page 47
46 B (unlocked) A (locked) Step 6: Secure the HDD in the Cartridge Casing. Position the HDD into place and sec ure it using the six scre ws supplied. Step 7: Slide the top Co ver over the Cartridge Casing. Slide the Cover forward over t he Cartridge Case. Ensure it is secured in place over the r elease latch. Reinsert the Cartridge Casing into the ...
-
LOREX Technology DGN216 - page 48
47 Appendix 2: Connection Diagra m to Cameras and Monitor ...
-
LOREX Technology DGN216 - page 49
48 Appendix 3: Pin Configurations 25 Pin Com Port EXTERNAL ALAM NO EXTERNAL ALARM COM PIN OFF ALARM INPUT 9 ALARM INPUT 10 ALARM INPUT 11 ALARM INPUT 12 ALARM INPUT 13 ALARM INPUT 14 ALARM INPUT 15 ALARM INPUT 16 ALARM INPUT 1 ALARM INPUT 2 ALARM INPUT 3 ALARM INPUT 4 ALARM INPUT 5 ALARM INPUT 6 ALARM INPUT 7 ALARM INPUT 8 PIN OFF GND DVR PIN13 Und ...
-
LOREX Technology DGN216 - page 50
49 Appendix 4: Rack Mount Installation Screws and brackets for rack mounting appl icat ions can be purchased as an optional accessor y. Front Angle with Rack Mount (Optional) Side View with Rack Mount (Optional) For more information about the rack mount & other accessories through Lorex, please visit: www.Lorexcctv.com . ...
-
LOREX Technology DGN216 - page 51
50 Appendix 5: Recordi ng Times (in Hours) NTSC SYSTEM IPS 25A 15 8 4 2 1 Best 48hr 96hr 180h r 360hr 720hr 1440hr High 60hr 120hr 226hr 450hr 900h r 1800hr Normal 96hr 192hr 360hr 720hr 1440hr 2880hr Record Quality Basic 160hr 320hr 600hr 1200hr 2400hr 4800hr HDD Type 250GB NOTE : The above data has been taken from actual test dat a obtained using ...
-
LOREX Technology DGN216 - page 52
51 Appendix 6: Compatible HDD Brands Manufacturer Model C a p acit y Ro tation HITAC HI Deskstar 180 GX P (120 GB ) 120G B 7200 rpm HITAC HI Deskstar 7K250, HD S7225 16VLAT2 0 160G B 7200rpm HITAC HI Deskstar 7K250, HD S7225 25VLAT8 0 250G B 7200rpm IBM Deskstar 120GX P (80GB ) 80G B 7200 rpm IBM Deskstar 120GX P (120GB ) 120G B 7200 rpm Maxtor D i ...
-
LOREX Technology DGN216 - page 53
52 It’s all on the web www.lorexcctv.com Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades VISIT Strate g ic Vista International Inc. www.lorexcctv.com ...
Hai una domanda su LOREX Technology DGN216?
Utilizza il modulo sottostante
Se non hai risolto il problema con LOREX Technology DGN216 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con LOREX Technology DGN216 è probabile che voglia condividere il modo di risolverlo.