Italiano dropdown-ico

Manuale per l’uso Cisco Systems ATA 188

64 pagine 0.65 mb
Scarica

Vai alla pagina of 64

Summary
  • Cisco Systems ATA 188 - page 1

    CH A P T E R 5-1 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 5 Parameters and Defaults This section pro vides information on the paramet ers and defaults that y ou can use to create your o wn Cisco A T A configuration f ile. This secti on also includes th e voice conf igurat i ...

  • Cisco Systems ATA 188 - page 2

    5-2 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Configuration Text File Template Note A tool called bitaid.e x e is b undled w ith your Cisco A T A software. Y ou can use th is tool to help you con figure v alues of Cisco A T A bitma p param ...

  • Cisco Systems ATA 188 - page 3

    5-3 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults User Interface (UI) Security Parameter UID0:0 UID1:0 UseLoginID:0 LoginID0:0 LoginID1:0 PWD0:0 PWD1:0 AutMethod:0x00000000 GateWay:0 MediaPort:16384 RxCodec:1 TxCodec:1 LBRCodec:0 AudioMode:0x00 ...

  • Cisco Systems ATA 188 - page 4

    5-4 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Parameters for Co nfiguration Method and Encryption T o clear a password, change the value to 0. Y ou cannot reco ver a fo rgott en password unless you re set the entire conf iguratio n of the ...

  • Cisco Systems ATA 188 - page 5

    5-5 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Parameters for Configura tion Method and E ncryption Default 1 Voice Configuration Menu Access Code 305 Related Parameters • TftpURL, page 5-5 • EncryptKe y , page 5-6 • EncryptK eyEx, pag ...

  • Cisco Systems ATA 188 - page 6

    5-6 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Parameters for Co nfiguration Method and Encryption CfgInterval Description Use this parameter to speci fy the number of seconds between each conf iguration update. The Cisco A T A will also up ...

  • Cisco Systems ATA 188 - page 7

    5-7 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Parameters for Configura tion Method and E ncryption Range Maximum number of characters: 8 Default 0 Voice Configuration Menu Access Code 320 Related Parameters • UseTFTP , page 5-4 • TftpUR ...

  • Cisco Systems ATA 188 - page 8

    5-8 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Network Config u r ation Par ameters Value Type Hexadecimal string of the form: Rc4PasswdInHex/macinHex_ 12 • rc4K eyInHe x_n is a hexadeci mal string of one to 6 4 characters. • /macInHe x ...

  • Cisco Systems ATA 188 - page 9

    5-9 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Network Configuration Parameters Value Type Boolean Range 0 or 1 Default 1 Voice Configuration Menu Access Code 20 Related Parameters • StaticIp, page 5-9 • StaticRoute, page 5-9 • StaticN ...

  • Cisco Systems ATA 188 - page 10

    5-10 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Network Config u r ation Par ameters Default 0.0.0.0 Voice Configuration Menu Access Code 2 Related Parameters • DHCP , page 5-8 • StaticIp, page 5-9 • StaticNetMask, page 5-10 StaticNet ...

  • Cisco Systems ATA 188 - page 11

    5-11 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Network Configuration Parameters Default 0.0.0.0 Voice Configuration Menu Access Code 141 Related Parameters • AltNTPIP , page 5-11 • T imeZone, pa ge 5-36 AltNTPIP Description This paramet ...

  • Cisco Systems ATA 188 - page 12

    5-12 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Network Config u r ation Par ameters DNS2IP Description This parameter is for settin g the secondary domain na me serv er (DNS) IP address, if the DHCP server does not pro vide one. If DHCP pr ...

  • Cisco Systems ATA 188 - page 13

    5-13 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults H.323 Parameters H.323 Parameters This sections describes the fo llowi ng parameters, which include H.323 Gatek eeper configur ation parameters: • GkOrProxy , page 5-13 • GkId, page 5-14 ? ...

  • Cisco Systems ATA 188 - page 14

    5-14 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults H.323 Parameters GkId Description This parameter is the i dentifier for the primary H.323 gatekeep er . Value Type Alphanumeric string Default . (not specif ied) Range Maximum 31 characters Vo ...

  • Cisco Systems ATA 188 - page 15

    5-15 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults H.323 Parameters Range Maximum number of characters: 31 Default 0 Voice Configuration Menu Access Code 6 Related Parameter AltGkT imeOut, page 5-15 AltGkTimeOut Description Y ou can use this pa ...

  • Cisco Systems ATA 188 - page 16

    5-16 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults H.323 Parameters UID0 Description This parameter is the User ID (E.164 phone number) for the Phone 1 port. If the v alue is set to zero, the port will be disabled and no dial tone will sound. ...

  • Cisco Systems ATA 188 - page 17

    5-17 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults H.323 Parameters Voice Configuration Menu Access Code 4 Related Parameters • UID0, page 5-16 • UID1, page 5-17 • PWD1, page 5-18 • UseLoginID , page 5-19 • LoginID0, page 5-18 • Log ...

  • Cisco Systems ATA 188 - page 18

    5-18 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults H.323 Parameters PWD1 Description This parameter is the passwo rd for the Phone 2 po rt. Value Type Alphanumeric string Range Maximum number of characters: 31 Default 0 Voice Configuration Men ...

  • Cisco Systems ATA 188 - page 19

    5-19 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults H.323 Parameters Voice Configuration Menu Access Code 46 Related Parameters • LoginID1, page 5-19 • PWD0, page 5-16 • PWD1, page 5-18 • UseLoginID , page 5-19 • AutMethod, page 5-20 L ...

  • Cisco Systems ATA 188 - page 20

    5-20 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults H.323 Parameters Value Type Boolean Range 0 or 1 Default 0 Voice Configuration Menu Access Code 93 AutMethod Description Use this parameter to select the desired auth enti cation method, with ...

  • Cisco Systems ATA 188 - page 21

    5-21 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Audio Config uration Para meters Value Type Alphanumeric string Range Maximum number of characters: 31 Default 0 Voice Configuration Menu Access Code 11 Audio Configuration Parameters This sect ...

  • Cisco Systems ATA 188 - page 22

    5-22 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Audio Configuration Parameters Related Parameters • TOS, page 5-2 6 • VLANSetting, page 5-12 RxCodec Description Use this parameter to specify receiving-audio codec preference. The follo w ...

  • Cisco Systems ATA 188 - page 23

    5-23 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Audio Config uration Para meters Range 0-3 Default 2 Voice Configuration Menu Access Code 37 Related Parameters • LBRCodec, page 5-23 • NumTxFrames, page 5-25 • RxCodec, page 5-22 • Aud ...

  • Cisco Systems ATA 188 - page 24

    5-24 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Audio Configuration Parameters AudioMode Description This parameter represents the au dio operat ing mode. The lo wer 16 bits are for the Phone 1 port, and the upper 16 bits are for the Phone ...

  • Cisco Systems ATA 188 - page 25

    5-25 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Audio Config uration Para meters NumTxFrames Description Use this parameter to select the number of frames per packet that the Cisco A T A transmits: • The frame size for each G.729 data pack ...

  • Cisco Systems ATA 188 - page 26

    5-26 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Operational Parameters TOS Description This parameter allows you to conf igure T ype of Service (T oS) bits by specifying the precedence and delay of audi o and signal ing IP packets, as follo ...

  • Cisco Systems ATA 188 - page 27

    5-27 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Operatio nal Parameters CallFeatures Description Disable/enable CallFeatures by set ting each corresponding bit to 0 or 1. The lower 16 bits are for the Phone 1 port, and the up per 16 bits are ...

  • Cisco Systems ATA 188 - page 28

    5-28 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Operational Parameters PaidFeatures Description Unsubscribe/subscribe to CallFeatur es by setting each corresponding bit to either 0 or 1. The lo wer 16 bits are for the Phone 1 port, and the ...

  • Cisco Systems ATA 188 - page 29

    5-29 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Operatio nal Parameters CallCmd Description Command table that controls call commands such as turning on /off cal ler ID. For detailed i nformation on the CallCmd parameter , see Chapter 6, “ ...

  • Cisco Systems ATA 188 - page 30

    5-30 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Operational Parameters FeatureTimer Description This parameter pro vides conf igurable timing v alues for v arious telephone features, as d escribed below: • Bits 1-15—Reserved. • Bits 1 ...

  • Cisco Systems ATA 188 - page 31

    5-31 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Operatio nal Parameters FeatureTimer2 Description This parameter pro vides conf ig urable timing v alues for v arious Cisco A T A features, as described belo w: • Bits 0-7—Maximum time that ...

  • Cisco Systems ATA 188 - page 32

    5-32 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Operational Parameters ConnectMode Description This parameter is a 32-bit bitmap used to control th e connection mode of the selected call signaling protocol. T able 5-5 on page 5-33 provid es ...

  • Cisco Systems ATA 188 - page 33

    5-33 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Operatio nal Parameters T able 5-5 Conn ec tMode P ar amete r Bit Defi nitions Bit Number Definition 0 0—Use slo w-start procedure (for H.225 /Q.931 and H.245). 1—Use fast-start procedure ( ...

  • Cisco Systems ATA 188 - page 34

    5-34 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Operational Parameters OpFlags Description This parameter enables/disables various operational features. See T able 5-6 on page 5-35 for bit definitions o f this parameter . Value Type Bitmap ...

  • Cisco Systems ATA 188 - page 35

    5-35 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Operatio nal Parameters T able 5 -6 OpFlags Par ameter Operational Featur es t o T urn On or Off Bit Number Definition 0 If Bit 0 = 0, the TFTP config uration fil ename supplied b y the DHCP se ...

  • Cisco Systems ATA 188 - page 36

    5-36 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Operational Parameters TimeZone Description This parame ter is the t i m ezone offset (in hours) from Greenwich Mean Time (GMT) for ti me-stamping incoming calls with local time (to use for Ca ...

  • Cisco Systems ATA 188 - page 37

    5-37 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Telephone Configuration Paramete rs Value Type Integer Range 0-24 Default 17 Voice Configuration Menu Access Code 302 Additional Description Use the following list to select T imezone offset (i ...

  • Cisco Systems ATA 188 - page 38

    5-38 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Telephone Conf iguration Parameter s CallerIdMethod Description This 32-bit p arameter sp ecifies the signal fo rmat to use for both FXS ports for generating Caller ID format. Possible v alues ...

  • Cisco Systems ATA 188 - page 39

    5-39 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Telephone Configuration Paramete rs • Bit 16—If this bit is enabl ed (it is enab led by default), send special character P (priv a te) to CID device if telephone nu mber is rest ricted. • ...

  • Cisco Systems ATA 188 - page 40

    5-40 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Telephone Conf iguration Parameter s • Bit 3: CALLEE_DISCON NECT_POLARITY . Polar ity to use when the Cisco A T A is the callee and the call is disconnected. – 0 =Use forward polarity (Def ...

  • Cisco Systems ATA 188 - page 41

    5-41 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Tone Configuration Parameters Range -9 to 2 dB Default -4 Voice Configuration Menu Access Code 371 Related Parameter FXSInputLe vel, page 5-40 Tone Configuration Parameters The Cisco A T A supp ...

  • Cisco Systems ATA 188 - page 42

    5-42 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Tone Configuration Paramete rs • NumOfF r eqs is the number of frequenc y components (0, 1 or 2). • Tfr eq1 and Tfr eq2 are the transformed frequencies of the f irst and second frequencies ...

  • Cisco Systems ATA 188 - page 43

    5-43 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Tone Configuration Parameters Tone Parameter Syntax—Extended Formats T wo ty pes of extended format e xist for the Cisco A T A tone parameters: • Extended Format A, page 5-43 —This format ...

  • Cisco Systems ATA 188 - page 44

    5-44 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Tone Configuration Paramete rs • OffT ime1 and Of fT ime2 values are th e lengths of time that silence is played for the first an d second on-of f pairs of a cadence, respectively . (See Fig ...

  • Cisco Systems ATA 188 - page 45

    5-45 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Tone Configuration Parameters • TF re q1 , TF req2 , and TF r eq3 are the transformed frequencies of the first, second, and third frequencies, respecti vely . Calculate each value with the f ...

  • Cisco Systems ATA 188 - page 46

    5-46 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Tone Configuration Paramete rs T wo examples of Extended Format B, both u sing the Reo rder to ne, follow . ReorderTone Parameter Example1 Assume that you want a reorde r tone in w hich: • T ...

  • Cisco Systems ATA 188 - page 47

    5-47 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Tone Configuration Parameters ReorderTone Parameter Example 2 Assume that you want a reorde r tone in w hich: • The only frequency is 400 H z. • The frequency plays six times, each time for ...

  • Cisco Systems ATA 188 - page 48

    5-48 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Tone Configuration Paramete rs Recommended Values The follo wing settings are r ecommended for the US: • Di a l T on e = " 2,31538,30 831,1380,1740,1,0,0,1000 " ( a p pr o x i m a ...

  • Cisco Systems ATA 188 - page 49

    5-49 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Tone Configuration Parameters • Tfreq1—31538 • Tfreq2—30831 • T amp1—13 80 • T amp2—17 40 • Steady—1 • OnT ime—0 • OffT ime—0 • T otalT oneTime—1000 Voice Config ...

  • Cisco Systems ATA 188 - page 50

    5-50 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Tone Configuration Paramete rs • T amp2—15 13 • Steady—0 • OnT ime—2000 • Of fT ime—2000 • T otalT oneTime—0 Voice Configuration Menu Access Code 922 RingbackTone Descripti ...

  • Cisco Systems ATA 188 - page 51

    5-51 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Tone Configuration Parameters • Of fT ime—2400 • T otalT oneTime—4800 Voice Configuration Menu Access Code 924 AlertTone Description The Cisco A T A plays the alert tone as a confirmati ...

  • Cisco Systems ATA 188 - page 52

    5-52 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Dial Plan Parameters Recommended Values: • United States —2,4,25 • Sweden — 1,5,25 Voice Configuration Menu Access Code 929 Dial Plan Parameters This section describes the con figurabl ...

  • Cisco Systems ATA 188 - page 53

    5-53 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Dial Plan Parameters • Dial Plan Commands, page 5-53 • Dial Plan Rule s, page 5-54 • Dial Plan Examples, page 5-58 Dial Plan Commands The follo wing list contains co mmands that can be us ...

  • Cisco Systems ATA 188 - page 54

    5-54 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Dial Plan Parameters Note No synta x check is performed by the actual imp lementati on. The admin istrator has the respo nsibility o f making sure that the dial plan is syntactically v alid. D ...

  • Cisco Systems ATA 188 - page 55

    5-55 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Dial Plan Parameters Syntax H dnnnn where d is a delay-in-seconds parameter 0-9,a-z (to support 0 to 35 seconds delay), and nnnn is the v ariable-length phone number t o call when no digits are ...

  • Cisco Systems ATA 188 - page 56

    5-56 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Dial Plan Parameters Example 1 R1212([2_9]-) This rule prepends 1212 to dial strings that ha ve a l eading digit of 2 to 9. Note Note: ‘R’ rules can replace mo st ‘P’ rules; for e xamp ...

  • Cisco Systems ATA 188 - page 57

    5-57 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Dial Plan Parameters Example: F1900|F1888 or F(1900|1888) These rules block call forward ing numbers beginnin g with 1900 or 1888. Log Information The CFWD Bloc k:<num> is sho wn in the p ...

  • Cisco Systems ATA 188 - page 58

    5-58 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Dial Plan Parameters Dial Plan Examples This section contains three dial plan e xampl es that use many diff erent rules and commands. Dial Plan Example 1 (Default Dial Plan) The follo wing dia ...

  • Cisco Systems ATA 188 - page 59

    5-59 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Dial Plan Parameters Dial Plan Example 2 The follo wing dial plans: .t7>#......t4-|911|1t7>#..........t1-|0t4>#.t7- or .t7>#r6t4-|911|1t7>#.r9t1-|0t4>#.t7- consist of the foll ...

  • Cisco Systems ATA 188 - page 60

    5-60 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Diagnostic Parame ters DialPlanEx If your dial pl an exceeds 199 char acters, then use must use the DialPl anEx parameter to configu re your dial plans. The DialPlanEx parame ter supports dial ...

  • Cisco Systems ATA 188 - page 61

    5-61 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults Diagnostic Parameters NPrintf Description Use this parameter to specify the IP address and port of a host to which all Cisco A T A deb ug messages are sent. The program prserv .exe, which comes ...

  • Cisco Systems ATA 188 - page 62

    5-62 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults Diagnostic Parame ters Voice Configuration Menu Access Code 7975640 Related Parameter SyslogCtrl, pag e 5-62 SyslogCtrl Description Use this parameter to turn on specif ic syslog traces. All t ...

  • Cisco Systems ATA 188 - page 63

    5-63 Cisco ATA 186 and Cisco ATA 188 Analog Telep hone Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Pa rameters and Defaults CFGID—Version Parameter for Cisco ATA Configuration Fi le CFGID—Version Parameter for Cisco ATA Configuration File Description CFGID is a 32- bit unsign ed-value paramete r whose pu rpose i ...

  • Cisco Systems ATA 188 - page 64

    5-64 Cisco ATA 186 and Cisco ATA 188 A nalog Telephon e Adaptor Administrator’s Guide for H.323 (version 3.0) OL-4804-01 Chapter 5 Paramete rs and Defaults CFGID—Version Parameter for Cisco ATA Confi guration File ...

Fabbricante Cisco Systems Categoria Telephone Accessories

I documenti che otteniamo dal fabbricante del dispositivoCisco Systems ATA 188 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Cisco Systems
- manuali per l’uso ATA 188
- schede prodotto Cisco Systems
- opuscoli
- o etichette energetiche Cisco Systems ATA 188
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Cisco Systems ATA 188.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Cisco Systems ATA 188, manuali di manutenzione, brevi manuali o manuali utente Cisco Systems ATA 188. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Cisco Systems ATA 188.

Manuali per l’uso simili

Manuale completo del dispositivo Cisco Systems ATA 188, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Cisco Systems ATA 188 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Cisco Systems ATA 188.

Il manuale per l’uso completo Cisco Systems, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Cisco Systems ATA 188 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Cisco Systems ATA 188, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Cisco Systems ATA 188 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Cisco Systems ATA 188 - che ci dovrebbe aiutare nei primi passi durante l'uso Cisco Systems ATA 188
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Cisco Systems ATA 188
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Cisco Systems ATA 188 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Cisco Systems ATA 188?

Utilizza il modulo sottostante

Se non hai risolto il problema con Cisco Systems ATA 188 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Cisco Systems ATA 188 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)