Manuale per l’uso Ingersoll-Rand 8477-A

12 pagine 0.82 mb
Scarica

Vai alla pagina of 12

Summary
  • Ingersoll-Rand 8477-A - page 1

    OPERATORS MANUAL a- SECTION MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE “0004” SERIES GRINDERS Released: 10/72 Revised: 3-l0-95 Form: 006-2 Tool Products Models: 8475-A-( ), 8475-A1, 8476-A, 8476-A1, 8477-A, 8477-A1, 8478-A and 8478-A1. READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT. FAILURE ...

  • Ingersoll-Rand 8477-A - page 2

    FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY. Wear eye protection when operating or performing maintenance on this tool. Turn off air supply and disconnect air supply hose before installing, , removing or adjusting any accessory on this tool, or before performing any maintenance on this tool. Do not carry the tool by the hose. D ...

  • Ingersoll-Rand 8477-A - page 3

    ROUTINE LUBRICATION REQUIREMENTS Ml0 32 Lack of or an excessive amount of lubrication will affect the perfor- mance and life of this tool. Use only recommended lubricants at below time intervals: EVERY 8 HOURS OF TOOL OPERATION - Fill lubricator reser- voirof recommended F.R.L. with spindle oil (29665). If an in line or air line lubricator is not u ...

  • Ingersoll-Rand 8477-A - page 4

    MODEL IDENTIFICATION The grinder models listed in the model identification table above are furnished with a collet as standard equipment and are intended for use with mounted wheels and shall not be used with other type grinding wheels. Other size collet inserts or other collet assemblies listed on page 10 can be furnished with the above listed mod ...

  • Ingersoll-Rand 8477-A - page 5

    DISASSEMBLY AND ASSEMBLY OF TOOLS Ml0 Disconnect air supply from tool or shut off air supply and exhaust (drain) line of compressed air BEFORE performing maintenance or service to tool. Before starting to disassemble or assemble this tool (any part or completely), be sure to read “Inspection, Maintenance and Instal- lation” section. To minimize ...

  • Ingersoll-Rand 8477-A - page 6

    TYPICAL CROSS SECTION OF TOOL -VALVE - MOTOR SPINDLE 6 ...

  • Ingersoll-Rand 8477-A - page 7

    SPINDLE SECTION Ml 3 COLLET NUT 41751 T r COLLET BODY 43178 -- _- - - COLLET ASSEMBLY 43179-( ) COLLET (SEE TABLE, PAGE 4) ET ASSEMBLY 44123 COLLET ASSEMBLY 44124-8 -INCLUDED WITH NOSE PIECE 33220 ‘!-COLLET 31812-8 COLLET GUARD 43897 DIFFUSER 43893 COLLET 41750-3 SPINDLE 44602 LOCK NUT 31810 NOSE PIECE 31811 COLLET 31812-8 -- - - (INCLUDES BEARIN ...

  • Ingersoll-Rand 8477-A - page 8

    SPINDLE SECTION DISASSEMBLY a. Remove driver (43163) from spindle. Tap end of spindle with a soft face hammer to loosen and remove spindle out nose end (44605) and bearing (33237) to housing. of housing. b. Assemble spindle to housing and assemble driver (43163) to spindle. ASSEMBLY a. Assemble felt seal (44606), wave washer (43150), bearing (42516 ...

  • Ingersoll-Rand 8477-A - page 9

    VALVE SECTION Ml0 32 0 43160 LEVER FOR NON -EU MODELS 0 45953 LEVER ASS’Y FOR -EU MODELS Cl * LEVER - ROLL PIN Yl78-44 __o__I ROLL PIN Yl78-216 r , BUT HOUSING431761 (BUlTON THROTTLE) ------ROLL PIN Yl78-211 (BUTTON THROTTLE) HOUSING 43161 (LEVER THROlTLE, NON -EU) (LEVER - VALVE 43170 V~UTTON THROTTLE) .TON 43169 SPRING 31125-----@ v REGULATOR 4 ...

  • Ingersoll-Rand 8477-A - page 10

    ACCESSORIES OPTIONAL COLLETS COLLET COLLET NUMBER ASSEMBLY NO. SIZE CAPACITY 41750-1 43179-1 1/8" 3/32” - 1/8” 41750-2 43179-2 3/16” 5/32” - 3/1 6” 41750-3 43179-3 1/4” 7/32” - 1/4” 41750-11 43179-11 3mm 41750-12 43179-12 I - ------ I 6mm I SERIES 43179 3-PIECE COLLETS COLLET NUT - 41751 COLLET BODY - 43170 5/16” - 24 THREAD ...

  • Ingersoll-Rand 8477-A - page 11

    TROUBLE SHOOTING Ml0 32 LISTED BELOW ARE SOME OF THE MOST COMMON CAUSES FOR THE GRINDER TO MALFUNCTION. MALFUNCTIONS BEYONDTHE SCOPE OF THIS MANUAL SHOULD BE BROUGHT TO THE ATTENTlON OF YOUR ARO REPRESENTATIVE OR RETURN THE TOOL TO THE FACTORY FOR REPAIR. LOW SPEED AND POWER OR GRIND- ER WILL NOT RUN. THROTTLE VALVE HARD TO OPERATE. TOOL WILL NOT S ...

  • Ingersoll-Rand 8477-A - page 12

    Part of world wide Ingersoll-Rand PN49999-116 ...

Fabbricante Ingersoll-Rand Categoria Grinder

I documenti che otteniamo dal fabbricante del dispositivoIngersoll-Rand 8477-A possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Ingersoll-Rand
- manuali per l’uso 8477-A
- schede prodotto Ingersoll-Rand
- opuscoli
- o etichette energetiche Ingersoll-Rand 8477-A
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Ingersoll-Rand 8477-A.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Ingersoll-Rand 8477-A, manuali di manutenzione, brevi manuali o manuali utente Ingersoll-Rand 8477-A. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Ingersoll-Rand 8477-A.

Manuali per l’uso simili

Manuale completo del dispositivo Ingersoll-Rand 8477-A, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Ingersoll-Rand 8477-A dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Ingersoll-Rand 8477-A.

Il manuale per l’uso completo Ingersoll-Rand, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Ingersoll-Rand 8477-A - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Ingersoll-Rand 8477-A, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Ingersoll-Rand 8477-A che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Ingersoll-Rand 8477-A - che ci dovrebbe aiutare nei primi passi durante l'uso Ingersoll-Rand 8477-A
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Ingersoll-Rand 8477-A
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Ingersoll-Rand 8477-A in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Ingersoll-Rand 8477-A?

Utilizza il modulo sottostante

Se non hai risolto il problema con Ingersoll-Rand 8477-A con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Ingersoll-Rand 8477-A è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)