-
Casio SE-S2000 - page 1
ELECTR ONIC CASH REGISTER USER'S MANUAL Eu Di U .K. THANK YOU YOUR RECEIPT CALL AGAIN ! GROCERY DAIRY H.B.A. FROZEN FOOD DELICATESSEN SE-S2000 ...
-
Casio SE-S2000 - page 2
2 E Do not locate the cash register where it will be subjected to direct sunlight, high humidity , splashing with water or other liquids , or high temperature (such as near a heater). Ne ver try to open the cash register or attempt your o wn repairs. T ak e the cash register to your authorized CASIO dealer f or repairs. Use a soft, dr y cloth to cl ...
-
Casio SE-S2000 - page 3
Intr oduction & Contents 3 E W elcome to CASIO Cash Register! Congratulations upon your selection of a CASIO Electronic Cash Register , which is designed to provide years of reliable operation. Operation of a CASIO cash register is simple enough to be mastered without special training. Everything you need to know is included in this manual, so ...
-
Casio SE-S2000 - page 4
4 Intr oduction & Contents E Safety Precautions • T o use this product safely and correctly , read this manual thoroughly and operate as instructed. After reading this guide, keep it close at hand for easy reference. Please keep all informations for future reference. • Always observe the warnings and cautions indicated on the product. About ...
-
Casio SE-S2000 - page 5
Intr oduction & Contents 5 E W arning! P ower plug and A C outlet Use only a pr oper A C electric outlet (100V~240V) . Use of an outlet with a different v oltage from the rating creates the danger of malfunction, fire, and electric shoc k. Overloading an electric outlet creates the danger of overheating and fire. Make sure the power plug is ins ...
-
Casio SE-S2000 - page 6
6 Intr oduction & Contents E Introduction & Contents ...................................................................................... 2 Getting Star ted ................................................................................................... 10 1. Load the memory protection batteris and Paper rolls ......................... ...
-
Casio SE-S2000 - page 7
Intr oduction & Contents 7 E Registering PLUs ............................................................................................................ 34 Preparing and using discounts ............................................................................................ 36 Programming discounts ........................................ ...
-
Casio SE-S2000 - page 8
8 Intr oduction & Contents E Programming other descriptors ...................................................................................... 58 Report descriptor .............................................................................................................. .................... 58 Grand total, special character ............. ...
-
Casio SE-S2000 - page 9
Intr oduction & Contents 9 E T roubleshooting ................................................................................................. 88 When an error occurs .......................................................................................................... 88 When the register does not operate at all .......................... ...
-
Casio SE-S2000 - page 10
10 E 1. Remove the printer cover and open the platen arm (receipt side). printer cover platen arm 2. Remove the battery compartment cover . battery compartment cover 1. Load the memor y pr otection batteris and P aper rolls Load the tw o memor y pr otection batteries 3. Note the (+) and ( – ) markings in the battery compartment. Load a set of two ...
-
Casio SE-S2000 - page 11
11 Getting Started E Step 1 Remove the printer cover . Step 2 Open the platen arm. Step 3 Ensuring the paper is being fed from the bottom of the roll, lower the roll into the space behind the printer . Complete Replace the printer cover , passing the leading end of the paper through the cutter slot. T ear off the excess paper . Step 5 Close the pla ...
-
Casio SE-S2000 - page 12
12 Getting Star ted E T o install journal paper Step 1 Remove the printer cover . Step 2 Open the platen arm. Step 3 Ensuring the paper is being fed from the bottom of the roll, lower the roll into the space behind the printer . Step 4 Put the leading end of the paper over the printer . Step 5 Close the platen arm slowly until it locks steadily . S ...
-
Casio SE-S2000 - page 13
13 Getting Started E Be sure to check the sticker (rating plate) on the side of the cash register to make sure that its voltage matches that of the power supply in your area. When the display shows “ Low battery ” , load memory protection batteries (refer to page 10). 3. Plug the cash register into a wall outlet. 4. Inser t the mode ke y marked ...
-
Casio SE-S2000 - page 14
14 Getting Star ted E This cash register is capable of automatically calculating up to four dif ferent sales taxes. The sales tax calculations are based on rates, so you must tell the cash register the rates, the type of tax (add-in or add- on). Note that special rounding methods (next page) are also available to meet certain local tax requirements ...
-
Casio SE-S2000 - page 15
15 Getting Started E Besides cut off, round of f and round up, you can also specify “ special rounding ” for subtotals and totals or changes. Special rounding converts the right-most digit(s) of an amount to “ 0 ” or “ 5 ” (or “ 00 ” , “ 25 ” , “ 50, “ 75 ” ) to comply with the requirements of certain areas. Pr ogramming s ...
-
Casio SE-S2000 - page 16
16 Getting Star ted E 9. Select watermark on receipt. T urn the mode switch to “ PGM ” , enter <0> or <1>, and press the <CH> , <ST> Example: no watermark 2 0 hs with watermark 2 1 hs NO TE: After completion of register programming, enter 6200 and s in the PGM 7 mode (PGM mode ⇒ 7 s ) to backup the program data into th ...
-
Casio SE-S2000 - page 17
17 Getting Started E 11. Depar tment unit price programming 12. PLU unit price pr ogramming 13. Discount rate programming 14. Issuing daily reset report After business hours, issue daily reset report. Refer to page-45. Maximum 6-digit unit price can be set to the department. Refer to page-32. T ax calculation status can be set to the department. Re ...
-
Casio SE-S2000 - page 18
18 Getting Star ted E 15. Adv anced operations and Setups Using clerk functions ..................................... 46 Single item cash sales .................................... 47 Currency exchange function .......................... 48 Premium ......................................................... 50 Coupon ................................. ...
-
Casio SE-S2000 - page 19
19 Getting Started E ...
-
Casio SE-S2000 - page 20
20 E Intr oducing the Register Roll paper Y ou can use the roll paper to print receipts and a journal (page 1 1 ~ 12). Mode key There are two types of mode keys: the program key (marked “ PGM ” ) and the operator key (marked “ OP ” ). The program key can be used to set the mode switch to any position, while the operator key can select the R ...
-
Casio SE-S2000 - page 21
21 Intr oducing the Register E X REG REG OFF OFF RF RF PGM PGM Z X2/Z2 Mode switc h Use the mode keys to change the position of the mode switch and select the mode you want to use. How to set the P op-up display 1. Lift the unit until it stops. 2. Rotate the unit. Mode Switch Mode Name Description X2/Z2 Z X REG OFF RF PGM Periodic sale read/r eset ...
-
Casio SE-S2000 - page 22
22 Intr oducing the Register E Display Displa y panel Main display Customer display 1"34 3 ST •123.45 PRETZEL 1"34 RPT AMOUNT T1 T2 T3 T4 TOT AL CHANGE ...
-
Casio SE-S2000 - page 23
23 Intr oducing the Register E 1 Item count and subtotal This part of the display shows item sold count and subtotal. 2 Item / Ke y / Change descriptor When you register an item or key , the item / key / change descriptor appears here. Mode descriptor is also displayed here. 3 Amount / Quantity This part of the display shows monetary amounts. It al ...
-
Casio SE-S2000 - page 24
24 Intr oducing the Register E 789 456 123 00 0 . OPEN CE 1 CE 2 PLU RF C PRICE CLK # — % – % + RECEIPT ON/OFF RECEIPT FEED JOURNAL FEED POST RECEIPT CPN HELP SUBT O T AL CA AMT TEND RC PD CH CHK VA T SIGN OFF TA X PGM DEPT SHIFT DEPT# ERR.CORR CANCEL DA T E TIME X 35 40 45 50 55 60 51 0 1 52 02 53 0 34 39 44 49 54 59 4 9 14 19 24 29 33 38 43 4 ...
-
Casio SE-S2000 - page 25
25 Intr oducing the Register E J Error corr ect / Cancel key e Use this key to correct registration errors and to cancel registration of entire transactions. K Post r eceipt key < Use this key to produce a post-finalization receipt. L Department keys ! , " , ~ Use these keys to register items to departments. M Charge k ey h Use this key to ...
-
Casio SE-S2000 - page 26
26 E Ho w to read the printouts • The journal / receipts are records of all transactions and operations. • The contents printed on receipts and journal are almost identical. • Y ou can choose the journal skip function. If the journal skip function is selected, the cash register will print the total amount of each transaction, and the details ...
-
Casio SE-S2000 - page 27
Basic Operations and Setups 27 E • Check to make sure that the cash register is plugged in securely . Page 13 • Check to make sure there is enough paper left on the roll. Pages 1 1, 12 • Read the flash report to confirm that totals are all zero. Page 77 • Check the date and time. Page 28 • Register transactions. Page 29 - • Periodically ...
-
Casio SE-S2000 - page 28
Basic Operations and Setups 28 E Bef ore b usiness hour s Checking the time and date Y ou can show the time or date on the display of the cash register whenever there is no registration being made. T o displa y and clear the date/time OPERA TION DISPLA Y X C Preparing coins f or change Y ou can use the following procedure to open the drawer without ...
-
Casio SE-S2000 - page 29
Basic Operations and Setups 29 E Preparing and using depar tment ke ys Registering department keys The following examples show how you can use the department keys in various types of registrations. Single item sale Example 1 OPERA TION RECEIPT 1- ! F Example 2 (Subtotal registration and change computation) OPERA TION RECEIPT 1234 ! s 20- F Repeat O ...
-
Casio SE-S2000 - page 30
Basic Operations and Setups 30 E Unit price $1.00 ———————— —— Item Quantity 12 ———————— —— Dept. 1 ————————————— Payment Cash $20.00 Quantity (4-digit integer/3-digit decimal) Multiplication OPERA TION RECEIPT 12 X 1- ! s 20- F Depar tment shift OPERA TION RECEIPT } 1- ! F Depar tmen ...
-
Casio SE-S2000 - page 31
Basic Operations and Setups 31 E 6 1 s 6 ~ 6 6 s Different setting Same setting Appropriate key Mode switch X REG OFF RF PGM Z X2/Z2 PGM * * Press ~ key repeatedly until the status you want to program is appeared on the display . T/S1 ~00 RPT AMOUNT T1 T2 T3 T4 TOTAL CHANGE T/S2 ~00 RPT AMOUNT T1 T2 T3 T4 TOTAL CHANGE T/S3 ~00 RPT AMOUNT T1 T2 T3 T ...
-
Casio SE-S2000 - page 32
Basic Operations and Setups 32 E Registering department keys by pr ogramming data Preset price OPERA TION RECEIPT " F Preset tax status OPERA TION RECEIPT 5 X # $ s 20- F Locking out high amount limitation OPERA TION RECEIPT 1050 # C 105 # s 2- F Unit price ($2.00) preset ————————— Quantity 5 Item 1 ————————? ...
-
Casio SE-S2000 - page 33
Basic Operations and Setups 33 E Preparing and using PLUs This section describes how to prepare and use PLUs. CAUTION: Before you use PLUs, you must first program the unit price and tax status. Pr ogramming PLUs T o program a unit price for eac h PLU 6 1 s 6 ~ 6 PLU No. + 6 s To newPLU Same setting Mode switch X REG OFF RF PGM Z X2/Z2 PGM * * Press ...
-
Casio SE-S2000 - page 34
Basic Operations and Setups 34 E PLU code Registering PLUs The following examples show how you can use PLUs in various types of registrations. PLU single item sale OPERA TION RECEIPT 14 + s 3- F PLU repeat OPERA TION RECEIPT 14 + + + s 10- F PLU multiplication OPERA TION RECEIPT 10 X 7 + s 20- F Unit price ($2.50) preset ————————— ...
-
Casio SE-S2000 - page 35
Basic Operations and Setups 35 E Unit price $32.80 —————————— Item 1 Quantity 1 —————————— PLU 30 ——————————— ——— Unit price $13.00 —————————— Item 2 Quantity 2 —————————— PLU 31 ——————————— ——— Payment Cash $60.00 ...
-
Casio SE-S2000 - page 36
Basic Operations and Setups 36 E Applies the preset discount rate to the last item registered. The input value takes priority of the preset value. 6 1 s 6 : : : : 6 p 6 s Preset rate Example: 10.0% 2 10 5.5% 2 5^5 12.34% 2 12^34 Mode switch X REG OFF RF PGM Z X2/Z2 PGM T o program the tax calculation status to the p key Refer to page 31. Registerin ...
-
Casio SE-S2000 - page 37
Basic Operations and Setups 37 E 6 1 s 6 : : : : : : 6 m 6 s Unit price Mode switch X REG OFF RF PGM Z X2/Z2 PGM Preparing and using reductions This section describes how to prepare and register reductions. Programming for reductions Y ou can use the m key to reduce single item or subtotal amounts. T o pr ogram preset reduction amount T o program t ...
-
Casio SE-S2000 - page 38
Basic Operations and Setups 38 E Registering credit and chec k payments The following examples show how to register credits and payments by check. Check OPERA TION RECEIPT 11- ! s 1234 N 20- k Dept. 4 $15.00 Item ————————— Quantity 1 ————————— ———— Payment Charge $15.00 Dept. 4 $55.00 Item ————— ...
-
Casio SE-S2000 - page 39
Basic Operations and Setups 39 E Registering both the Eur o and local currenc y The following example shows the basic operation using the currency exchange function between the Euro and the local currency . Case A : Main currency = Local, Payment = Euro, Change = Local OPERATION DISPLAY 600 ! P s P 15- a Case B : Main currency = Euro, Payment = Loc ...
-
Casio SE-S2000 - page 40
Basic Operations and Setups 40 E Registering returned goods in the RF mode The following examples show how to use the RF mode to register goods returned by customers. OPERA TION RECEIPT 4- # 15 m 2 + p s F Important • To avoid miss registrations in the RF mode, return the mode switch to the former position immediately. X REG OFF RF PGM Z X2/Z2 PG ...
-
Casio SE-S2000 - page 41
Basic Operations and Setups 41 E Registering mone y received on account The following example shows how to register money received on account. This registration must be performed out of a sale. OPERA TION RECEIPT 7-- r Amount can be up to 8 digits. Registering mone y paid out The following example shows how to register money paid out from the regis ...
-
Casio SE-S2000 - page 42
Basic Operations and Setups 42 E Making corrections in a registration There are three techniques you can use to make corrections in a registration. • T o correct an item that you input but not yet registered. • T o correct the last item you input and registered. • T o cancel all items in a transaction. T o correct an item you input b ut not y ...
-
Casio SE-S2000 - page 43
Basic Operations and Setups 43 E T o correct an item you input and registered OPERA TION RECEIPT 1- ! 2- " " e 2 + e 5 + 15 + 6- : e 15 + 10- : 8 X 4- $ e 6 X 4- $ s 50 p e s 5 p R 2- " e R 220 " s 20- F e 15- F k — — — Clearance — — Correction of PLU No. — — — Correction of open PLU unit price — — — Correc ...
-
Casio SE-S2000 - page 44
Basic Operations and Setups 44 E T o cancel all items in a transaction OPERA TION RECEIPT 1- ! 2- " 3- # 4- $ s e Pressing s key is necessary to cancel the transaction. 1 DEPT001 •1.00 1 DEPT002 •2.00 1 DEPT003 •3.00 1 DEPT004 •4.00 CANCEL ••••••••• ...
-
Casio SE-S2000 - page 45
Basic Operations and Setups 45 E TA1 •2,369.69 TX1 •128.86 TA2 •2,172.96 TX2 •217.33 ------------------------ GT •00000000125478.96 ------------------------ Z TRANS 0001 0001012 CASH No 362 •1,638.04 CHARGE No 56 •1,174.85 RC No 4 •810.00 PD No 5 •520.00 •5.00 CORR No 14 •39.55 RCT No 3 NS No 5 ------------------------ Printin ...
-
Casio SE-S2000 - page 46
46 E Advanced Operations Using c lerk functions Enable c lerk feature Please follow the below procedure to enable clerk feature. Clerk number — Clerk name/machine No./consecutive No. * COMMERCIAL MESSAGE * REG 03-06-2008 11:58 C 01 0001 000123 1 DEPT01 T1 •1.00 Assigning a clerk Y ou can assign clerks by using clerk number . Clerk number key Cl ...
-
Casio SE-S2000 - page 47
47 Adv anced Operations and Setups E Example 2 OPERA TION RECEIPT 3 X ! Example 3 OPERA TION RECEIPT 2- # ! F The transaction is immedi- ately finalized. The transaction is not finalized. Because another item is registered before the single item sales department. Dept. 1 ($1.00) ———————— —— Item Quantity 3 ———————? ...
-
Casio SE-S2000 - page 48
48 Advanced Operations and Setups E (Displays in ¥ : 3,150) (Displays in $) (Displays in $) (Displays in $) (5,000) Currency e xc hange function When <CE1> or <CE2> key is pressed, a current subtotal including tax is converted directly into foreign currency and the result is displayed, and the subsequent finalization is handled using t ...
-
Casio SE-S2000 - page 49
49 Adv anced Operations and Setups E P artial tender in a foreign currency * Pre-programmed exchange rate: ¥ 100 = $0.9524 Important! Partial tender in a foreign currency can be registered using a and k only. Other finalization keys cannot be used, but the remaining tender can be finalized using any finalize key. OPERATION DISPLAY RECEIPT 5 Enter ...
-
Casio SE-S2000 - page 50
50 Advanced Operations and Setups E Coupon Note that errors result when the result of a calculation is negative if the cash register is programmed to prohibit credit balances. Example OPERA TION RECEIPT 2 X 3- ! 2 X 50 H 4- # H F Dept. 1 $3.00 ———————— —— Item 1 Quantity 2 ———————— —— Coupon $0.50 × 2 —— ...
-
Casio SE-S2000 - page 51
51 Adv anced Operations and Setups E V A T breakdo wn printing Y ou can force printing of the V A T breakdown at the finalize stage, regardless of whether the cash register is programmed to print or skip printing of the V A T breakdown. Every time you want to have V A T breakdown, press <V A T>. Example OPERA TION RECEIPT 1- ! 1 + V F Dept 1 ...
-
Casio SE-S2000 - page 52
52 Advanced Operations and Setups E Pr ogramming depar tment / PLU descriptors and preset messa g es in the list In this chapter , the procedures to choose department / PLU descriptors and preset messages from the preset list are described. Read help receipt, so that you can set the descriptors and messages easily . How to c hoose and set the depar ...
-
Casio SE-S2000 - page 53
53 Adv anced Operations and Setups E Example : Input “ A pp l e J u i c e ” , enter <DBL><A> <DBL><Shift><p> <p> <l> <e> <Space> <CAPS><J> <Shift><u> <i> <c> <e> . 1 Alphabet keys Used input to characters. 2 Double size letter key Specifies that the ...
-
Casio SE-S2000 - page 54
54 Advanced Operations and Setups E Entering character s by m ulti tapping When you enter characters by this method, you need to press each key repeatedly until the desired character appears. Multi tapping keyboar d 1 Alphabet keys Used input to characters. 2 Double size letter k ey Specifies that the next characters you input to double size charac ...
-
Casio SE-S2000 - page 55
55 Adv anced Operations and Setups E Pr ogramming descriptors and messa ges b y entering character s The following descriptors and messages can be programmed; • Report descriptor (such as gross total, net total, cash in drawer … ) • Grand total • Special character (such as mode symbol, taxable symbol … ) • Read/reset report title • Me ...
-
Casio SE-S2000 - page 56
56 Advanced Operations and Setups E Pr ogramming depar tment / function key descriptor 6 2 s 66 Character a 6 s Appropriate key To other key PGM Mode switch *1 ☞ See “ Entering characters ” section, on page 53, 54. Contents Initial character Y ours Department 001 Department 002 Department 003 Department 004 Department 005 Department 006 Depar ...
-
Casio SE-S2000 - page 57
57 Adv anced Operations and Setups E Receipt message Refer to “ (message control) ” on page 64. Pr ogramming Clerk name 6 2 s 6 o 6 Characters a 6 s PGM Mode switch Clerk No. To a new clerk Clerk name Pr ogramming messa ge PGM Mode switch To a new message record To the next message record 6 2 s 6 :: DS s 66 a 6 s Memory No. Characters a ☞ See ...
-
Casio SE-S2000 - page 58
58 Advanced Operations and Setups E 6 2 s 6 :: :: s 66 a 6 s Memory No. Program code Characters To other program code To the next memory No. PGM Mode switch a Report descriptor Pr ogramming other descriptors ☞ See “ Entering characters ” section, on page 53, 54. Memory Program Contents Initial character Y ours No. code 01 02 03 04 05 06 07 08 ...
-
Casio SE-S2000 - page 59
59 Adv anced Operations and Setups E Grand total, special character Report title Memory Program Contents Initial character Y our s No. code 01 02 03 04 05 24 06 08 09 16 Fixed total report title T ransaction key report title PLU sales report title Department sales report title Group sales report title Clerk sales report title Hourly sales report ti ...
-
Casio SE-S2000 - page 60
60 Advanced Operations and Setups E Machine f eature program General contr ol program Programming pr ocedure Program data (b y address code) Address code 02 (machine n umber) Description Choice Program code Initial value Reset consecutive number after daily reset report is issued. Always “ 00000000 ” Y es = 0 No = 1 : D 8 ; D 8 ; ~ ; D 7 ~ D 1 ...
-
Casio SE-S2000 - page 61
61 Adv anced Operations and Setups E Address code 06 (calculation & operation contr ol) Address code 05 (print contr ol f or receipt) Description Choice Program code Initial value Print total line during finalization. Time system: 1 24 hour system, 2 12 hour system Buffered receipt print *1 Skip item lines on journal. (journal skip) Always “ ...
-
Casio SE-S2000 - page 62
62 Advanced Operations and Setups E Address code 08 (print contr ol for fix ed total repor t) Address code 10 (print contr ol for taxable amount) Description Choice Program code Initial value Print taxable amount 1 on receipt/journal. Print taxable amount 2 on receipt/journal. Print taxable amount 3 on receipt/journal. Print taxable amount 4 on rec ...
-
Casio SE-S2000 - page 63
63 Adv anced Operations and Setups E Address code 15 (print contr ol for reports) Address code 14 (currency e xchange contr ol) Description Choice Program code Initial value Monetary mode of CECA1 and CECK1 in fixed total report: Decimal for CECA1 and CECK1 in fixed total report: 1 Period = 0, 2 Comma = 1 Separator for CECA1 and CECK1 in fixed tota ...
-
Casio SE-S2000 - page 64
64 Advanced Operations and Setups E Address code 21 (message contr ol) Address code 25 (entry restriction) Address code 27 (c lerk contr ol) Description Choice Program code Initial value Restrict (to 0 or 5) on the last one digit for amount tender . Restriction (to 0 or 5) on the last one digit for <CASH>, <RC>, <PD>, money declar ...
-
Casio SE-S2000 - page 65
65 Adv anced Operations and Setups E Address code 29 (Eur o 2) Address code 28 (Eur o 1) Description Choice Program code Initial value Define Euro as the main currency . Select rounding option: Round off = 0, Cut off = 1, Round up = 2 Exchange rate (within 6-digits) Decimal point position of exchange rate: Integer only = 0 1st decimal place = 1, 2n ...
-
Casio SE-S2000 - page 66
66 Advanced Operations and Setups E Address code 30 (thermal printer contr ol) Address code 34 (bac klight control) Description Choice Program code Initial value Backlight Always “ 000 ” : D 4 ;;; D 3 D 2 D 1 A vailable = 0 Not available = 1 ; D 4 ;;; D 3 D 2 D 1 Description Choice Program code Initial value Print preset receipt message and gra ...
-
Casio SE-S2000 - page 67
67 Adv anced Operations and Setups E ...
-
Casio SE-S2000 - page 68
68 Advanced Operations and Setups E K ey function pr ogram Depar tment key/PLU pr ogram (Batch feature pr ogramming) Programming pr ocedure Department key PLU Program data 6 3 s 6 + 6 :: 6 a 6 s PGM Mode switch T o a new (not sequential) PLU Program data Dif ferent program to the next PLU (Rec No. 4 digits) PLU No. ~ *: In case of shifting departme ...
-
Casio SE-S2000 - page 69
69 Adv anced Operations and Setups E Depar tment key/PLU pr ogram (Individual feature programming) Programming pr ocedure Depar tment ke y PLU 6 3 s 6 : : 66 s 6 * 6 :: 66 s PGM Mode switch T o another key Program data Appropriate key Same program Address code ~ *: In case of shifting department, press <DEPT SHIFT> key first. 6 3 s 6 :: 66 s ...
-
Casio SE-S2000 - page 70
70 Advanced Operations and Setups E Address code 15 (high amount limit) Description Choice Pr ogram code High amount limit for entering unit price manually . :::: :: D 6 D 5 D 4 D 3 D 2 D 1 Significant numbers Program data (b y address code) Address code 11 (link) Description Choice Program code Link group record number: (000 ~ 999) Always “ 0 ? ...
-
Casio SE-S2000 - page 71
71 Adv anced Operations and Setups E T ransaction key pr ogram Pr ogramming procedure Pr ogram data <CASH>, <CHARGE>, <CHECK> 6 3 s 6 :: 66 s PGM Mode switch T o another transaction key Program data T ransaction key ~ Description Choice Program code Restriction (to 00, 25, 50, 75) on last two digits for amount tendered (Only for & ...
-
Casio SE-S2000 - page 72
72 Advanced Operations and Setups E Description Choice Program code Print when key is pressed. Always “ 00000 ” : D 6 ;;;; ; D 5 D 4 D 3 D 2 D 1 No = 0 Y es = 4 <SUBT OT AL> <REDUCTION (MINUS)>, <COUPON> <PREMIUM (%+)>, <DISCOUNT (%-)> Description Choice Program code T axable status: See page 70. Prohibit manual ra ...
-
Casio SE-S2000 - page 73
73 Adv anced Operations and Setups E <CURRENCY EXCHANGE> Description Choice Program code Define amount symbol. (0, 1 ~ 2) ( “ 0 ” means local currency symbol.) Define foreign currency totalizer . (0, 1 ~ 2) ( “ 0 ” treats as “ 1 ” .) Rounding: Round off = 0, cut of f = 1, round up = 2 Always “ 0 ” Monetary mode (0 ~ 9): º00 = ...
-
Casio SE-S2000 - page 74
74 Advanced Operations and Setups E Clerk other pr ogramming Programming procedure (individual) Program data Address code 67 (Clerk contr ol) 6 3 s 6 :: 07 s 6 :: s 6 :: a 6 s PGM Mode switch T o a new (not sequential) clerk Record No. Address code Program data T o the next clerk ~ Description Choice Program code T raining clerk Always “ 00000 ? ...
-
Casio SE-S2000 - page 75
75 Adv anced Operations and Setups E ...
-
Casio SE-S2000 - page 76
76 Advanced Operations and Setups E Printing read/reset repor ts • Dail y sales read repor t ( “ X ” mode) Y ou can print read reports at any time during the business day without affecting the data stored in the cash register's memory . • Dail y sales reset repor t ( “ Z ” mode) Y ou should print reset reports at the end of the bus ...
-
Casio SE-S2000 - page 77
77 Adv anced Operations and Setups E T o print daily read reports Y ou can select the appropriate report shown in the display . OPERA TION DISPLA Y 1. T urn to X mode. X REG OFF RF PGM Z X2/Z2 PGM Mode switc h 2. Select report you want to get by the <RC> key . 3. Press <CASH> to print report. *1 *1 If money declaration is necessary , co ...
-
Casio SE-S2000 - page 78
78 Advanced Operations and Setups E T o print daily reset repor ts Y ou can select the appropriate report shown in the display . OPERA TION DISPLA Y 1. T urn to Z mode. X REG OFF RF PGM Z X2/Z2 PGM Mode switc h 2. Select report you want to get by the <RC> key . 3. Press <CASH> to print report. *1 *1 If money declaration is necessary , c ...
-
Casio SE-S2000 - page 79
79 Adv anced Operations and Setups E Read / reset repor t sample Daily report DC •1.22 REF •2.42 ROUND •0.00 CANCEL No 2 •12.97 ------------------------ TA1 •2,369.69 TX1 •128.86 TA2 •2,172.96 TX2 •217.33 ------------------------ GT •00000000125478.96 ------------------------ Z TRANS 0001 0001012 CASH No 362 •1,638.04 CHARGE No ...
-
Casio SE-S2000 - page 80
80 Advanced Operations and Setups E X MONTHLY 0000020 1 ...... GROSS 1236.76 •12,202.57 NET No 214 •12,202.57 31 ...... GROSS 2132 •14,187.57 NET No 205 •13,398.76 ------------------------ TL GROSS 9746.63 •161,022.49 •16.52 NET No 2351 •161,022.49 •68.49 — Read symbol/report title — Report code — Date of a month — Gross sym ...
-
Casio SE-S2000 - page 81
81 Adv anced Operations and Setups E X GROUP 0000016 GROUP01 203.25 33.87% •1,108.54 GROUP02 183 40.58% •1,327.80 GROUP03 12 0.40% •13.25 GROUP99 13 0.54% •17.80 ------------------------ TL 862 •3,272.00 — Read symbol/report title — Report code — Group No./No. of items — Sales ratio/group amount — Group total No. of items — Gr ...
-
Casio SE-S2000 - page 82
82 Advanced Operations and Setups E • P eriodic sales read repor t ( “ X2 ” mode) Y ou can print read reports at any time during the business day without af fecting the data stored in the cash register's memory . • P eriodic sales reset repor t ( “ Z2 ” mode) Y ou should print reset reports at the end of the business day . T o prin ...
-
Casio SE-S2000 - page 83
83 Adv anced Operations and Setups E *1 Zero totalled departments/functions (the amount and item numbers are both zero) are not printed. *2 These items can be skipped by programming. ------------------------ ZZ1 TRANS 0001 0001112 CASH No 362 •1,638.04 CHARGE No 56 •1,174.85 RC No 4 •810.00 PD No 5 •5.00 CORR No 14 •39.55 RCT No 3 NS No 5 ...
-
Casio SE-S2000 - page 84
84 Advanced Operations and Setups E T o print key descriptor , name, messa g e pr ogram (e xcept PLU) OPERA TION REPORT 1. T urn to PGM mode. 2. Enter <2> and press <ST> key . 3. Press <ST> key . Reading the cash register's pr ogram T o print unit price/rate program (e xcept PLU) OPERA TION REPORT 1. T urn to PGM mode. 2. Ent ...
-
Casio SE-S2000 - page 85
85 Adv anced Operations and Setups E T o print the machine program (e xcept PLU) OPERA TION REPORT 1. T urn to PGM mode. 2. Enter <3> and press <ST> key . 3. Press <ST> key . — Program read symbol — T ransaction key program — Key character/rec-#/file-# — Key program Department program — Key character/rec-#/file-# — Key ...
-
Casio SE-S2000 - page 86
86 Advanced Operations and Setups E T o print the PLU unit price OPERA TION REPORT 1. T urn to PGM mode. 2. Enter <6> and press <ST> key . 3. Enter <104> and press <ST> key . 4. Enter <start rec-#> and <CA> key . 5. Enter <end rec-#> and <CA> key . T o print the PLU descriptor OPERA TION REPORT 1. T u ...
-
Casio SE-S2000 - page 87
87 Adv anced Operations and Setups E ...
-
Casio SE-S2000 - page 88
88 E This section describes what to do when you have problems with operation. When an err or occurs Errors are indicated by an error codes. When this happens, you can usually find out what the problem is as illustrated below . Press C and check the appropriate section of this manual for the operation you want to perform. T roubleshooting E001 E003 ...
-
Casio SE-S2000 - page 89
89 E T r oubleshooting T roubleshooting When the cash drawer does not open! In case of power failure or the machine is in malfunction, the cash drawer does not open automatically . Even in these cases, you can open the cash drawer by pulling drawer release lever (see below). Impor tant ! The drawer will not open, if it is locked with a drawer lock ...
-
Casio SE-S2000 - page 90
90 E T roubleshooting Clearing a mac hine loc k up If you make a mistake in operation, the cash register may lock up to avoid damage to programs and preset data. Should it happens, you can use the following procedure to clear the lock up without losing any data. 1 Power off the register . 2 Insert the PGM key in the mode switch. 3 Press down f , an ...
-
Casio SE-S2000 - page 91
91 E In case of po wer failure If the power supply to the cash register is cut by a power failure or any other reason, simply wait for power to be restored. The details of any ongoing transaction as well as all sales data in memory are protected by the memory backup batteries. (This is the reason to install the batteries.) • Power failure during ...
-
Casio SE-S2000 - page 92
92 E User Maintenance and Options Step 2 Press j to feed about 20 cm of paper . Step 3 Cut the journal paper at the point where nothing is printed. Step 4 Remove the journal take- up reel from its holder . Step 5 Remove the paper guide from the take-up reel. Step 6 Slide the printed journal from the take-up reel. Step 7 Open the platen arm. Step 8 ...
-
Casio SE-S2000 - page 93
93 E Options P-5880T r oll paper WT -89 wetproof co ver The optional wetproof cover protects the keyboard from moisture damage. Consult your CASIO dealer for details. User Maintenance and Options Step 1 Set the mode switch to the REG position and remove the printer cover . Step 2 Open the platen arm. Step 3 Remove the old paper roll from the cash r ...
-
Casio SE-S2000 - page 94
94 E Specifications Contents No. of Amount No. of items Count No. of Periodic Category T otalizers (10 digits) (4 digits) (4 digits) customers T otalizer (4 digits) Department 200 ✔ *1 ✔ *3 ✔ PLU 2000 ✔ *1 ✔ *3 Hourly sales 24 ✔ *1 ✔ *4 Monthly 31 ✔ *1 ✔ *4 Clerk 30 ✔ *1 ✔ *4 -- ✔ *1 or ✔ *4 or ✔ *4 or ✔ *4 ✔ 1 ✔ * ...
-
Casio SE-S2000 - page 95
95 E Index Specifications/Inde x A alphabet key 53, 54 Australian GST 17 B backlight 66 bottom message 26 C cancel 25, 44 CAPS key 53 cash 24, 71 cash in drawer 45 change 29 character enter key 53, 54 character keyboard 53 character manual input 53 charge 25, 38, 71 check 24, 38, 71 clear 24 clear key 53, 54 clerk 46 clerk function 64 clerk name 57 ...
-
Casio SE-S2000 - page 96
96 E Index M machine feature program 60 machine number 26, 60 magnetic plate 20 main display 20, 22 memory protection 10 message 57 message control 64 mixed tender 38 mode switch 20, 21 monthly report 80 multi tapping 54 multiplication 24, 30, 34, 73 N negative price 68, 70 net total 45 no sale 25, 41 non-add 25 non-add / no sale 72 O OFF mode 20 o ...
-
Casio SE-S2000 - page 97
97 E Index Index Z Z mode 20, 76 zero skip 63 zero unit price 68, 70 ...
-
Casio SE-S2000 - page 98
CASIO COMPUTER CO ., L TD. 6-2, Hon-machi 1-chome Shibuya-ku, T okyo 151-8543, Japan MO0712-A Printed in Indonesia Printed on recycled paper . SE-S2000*E ...
Hai una domanda su Casio SE-S2000?
Utilizza il modulo sottostante
Se non hai risolto il problema con Casio SE-S2000 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Casio SE-S2000 è probabile che voglia condividere il modo di risolverlo.