Italiano dropdown-ico

Manuale per l’uso Cooper Lighting 84700

41 pagine 0.8 mb
Scarica

Vai alla pagina of 41

Summary
  • Cooper Lighting 84700 - page 1

    Cooper Industries Crouse - Hinds Division Crouse - Hinds Airport Lighting Products 1200 Kennedy Road Windsor, CT 06095 860 683 - 4300 Fax 860 683 - 4354 Title: COPYRIGHT © 2006 Cooper Technologies Company FOR PARTS AND SERVICE, CALL 860 - 683 - 4300 DOCUMENT 9131 December 5, 2006 Revision M INSTRUCTION MANUAL L - 847 RUNWAY CIRCUIT SELECTOR SWI TC ...

  • Cooper Lighting 84700 - page 2

    9131 Rev. M REV. DESCRIPTION LTR. CHK. APV A Added Figure 6 - 3, - 4, - 11 (Pg. 39); Pg. 37 deleted S2 switch; Pg. 24 & 25, 6.3, 6.4 & 6.11, added figure for remote connections & deleted info that was present for remote connections; Pg. 25, 6.9, added info on removing tagged wire A92 - 037 PG 3/6/92 JAS 3/6/92 B Added ‘Figures & T ...

  • Cooper Lighting 84700 - page 3

    9131 Rev. M LIMITED PRODUCT WARRANTY THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT BY WAY OF LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR F ITNESS FOR ANY PARTICULAR PURPOSE. Crouse - Hinds Airport Lighting Products (the “Company”) warrants to each original B ...

  • Cooper Lighting 84700 - page 4

    9131 Rev. M SAFETY NOTICES This equipment is normally used or connected to circuits that may employ voltages, which are dangerous and may be fatal if accidentally contacted by operating or maintenance personnel. Extreme caution should be exercised when working with this equipment. While practical safety precautions have been incorporated in this eq ...

  • Cooper Lighting 84700 - page 5

    9131 Rev. M TABLE OF CONTENTS PAGE Title Page................................. ..............................................................................................................i Revisions....................................................................................................................................... .......ii Limi ...

  • Cooper Lighting 84700 - page 6

    9131 Rev. M FIGURES PAGE Figure 2- 1 Typical CSC Timing Diagram....................................................................................5 Figure 3A 84700 - 1 or - 2 Suggested Conduit Entrances........................................ ......................9 Figure 3B 84700 - 3 or - 4 Suggested Conduit Entrances............................ ...

  • Cooper Lighting 84700 - page 7

    9131 Rev. M SECTION 1 GENERAL INFORMATION 1.1 INTRODUCTION 1.1.1 Purpose This instruction book provides field support data and information for the FAA Type L - 847 Runway Circuit Selector Switches manufactured by Crouse - Hinds Airport Lighting Products, Windsor, CT 06095. The equipment is herein after referred to as a CSC. 1.1.2 Applicability This ...

  • Cooper Lighting 84700 - page 8

    9131 Rev. M 1.2.4.1 FAA Classification Type: L - 847 - 1, - 2, - 3, - 4 Class: A (for Class B, order Option - 10 or - 13) Rating: 1 and 2 (Dual Rating) 1.2.4.2 Electrical Characteristics Primary Power: L - 847 - 1, - 2: 120 VAC, 1.2A, 50/60Hz L - 847 - 3, - 4: 1 20 VAC, 2.4A, 50/60Hz Regulator Rating: All Models: Up to 20 amps at up to 5000 volts, ...

  • Cooper Lighting 84700 - page 9

    9131 Rev. M TABLE 1 - 1 84700 PART NUMBERS UP TO THREE OPTIONS BASIC NO ..... - ..... NUMBER OF CIRCUITS ..... - ..... OPT A ..... - ..... OPT B ..... - ..... OPT B 84700 (1 through 4) (Three Options from the selection chart) • The standard equipment includes the following: • NEMA 1 Cabinet • 120 VAC, 50/60 Hz primary power to be supplied by ...

  • Cooper Lighting 84700 - page 10

    9131 Rev. M SECTION 2 TECHNICAL DESCRIPTION 2.1 THEORY OF OPERATION The operational discussion presented herein pertains to standard model CSC units. Equipment supplied with options may deviate somewhat from the exact operational description pr esented, but the basic operating principles are identical for all equipment configurations. 2.1.1 Local C ...

  • Cooper Lighting 84700 - page 11

    9131 Rev. M 5 ...

  • Cooper Lighting 84700 - page 12

    9131 Rev. M SECTION 3 INSTALLATION AND OPERATION WARNING INSTALLATION, SERVICE, MAINTENANCE OR OPERATION SHOULD BE PERFORMED BY QUALIFIED PERSONN EL ONLY. 3.1 INSTALLATION All CSC units are supplied ready for operation with all ordered options installed. When properly connected, no electrical adjustments should be necessary prior to use. 3.1.1 Loca ...

  • Cooper Lighting 84700 - page 13

    9131 Rev. M 3.1.3.1 Mechanical Installation Cont'd ( ) 3. Remove the electrical assembly from the enclosure by loosening and removing the mounting hardware from the four corners of the base plate panel. ( ) 4. The electrical assembly can now be placed in the shipping carton for protection. ( ) 5. Proceed to mount th e empty enclosure in the de ...

  • Cooper Lighting 84700 - page 14

    9131 Rev. M 3.1.3.2 Electrical Wiring Cont'd ( ) 5. Connect each lighting load to the respective LOO P terminals in the high voltage section, using the #12 AWG ring terminals provided. NOTE: BEFORE CONNECTING LOAD TO LOOP TERMINALS, REMOVE JUMPER FROM ONLY THOSE TERMINALS THAT LOAD IS BEING CONNECTED TO. ( ) 6. Make any option related connecti ...

  • Cooper Lighting 84700 - page 15

    9131 Rev. M 9 ...

  • Cooper Lighting 84700 - page 16

    9131 Rev. M 10 ...

  • Cooper Lighting 84700 - page 17

    9131 Rev. M 11 ...

  • Cooper Lighting 84700 - page 18

    9131 Rev. M 3.2 OPERATION 3.2.1 Initial Checkout This checkout is divided into two sections. In the first section, all control functions are checked. In the second, the high voltage functions are checked. If the CSC fails to perform properly at any step of this procedure, consult the troubleshooting guide in Section 4. 3.2.1.1 Control Functions ( ) ...

  • Cooper Lighting 84700 - page 19

    9131 Rev. M 3.2.1.2 High Voltage Functions Cont'd D. Attempt to turn on the CCR. Verify it does not turn on. E. After repeating Step A above, re - install the dead front cover on the CSC. F. Restore power to all circuits. 3.2.2 Normal Operation In most cases, the CSC will be operated from a remote location. To affect this mode, set to remote a ...

  • Cooper Lighting 84700 - page 20

    9131 Rev. M SECTION 4 MAINTENANCE WARNING INSTALLATION, SERVICE, MAINTENANCE OR OPERATION SHOULD BE PERFORMED BY QUALIFIED PERSONNEL ONLY. 4.1 PERIODIC MAINTENANCE The CSC should be inspected periodically as shown be low: INTERVAL ACTION 1 month (A) Visually inspect high voltage relays through clear dead front cover. 3 months (A) Perform Control Fu ...

  • Cooper Lighting 84700 - page 21

    9131 Rev. M 4.2 CORRECTIVE MAINTENANCE CONT'D WARNING VOLTAGES IN EXCESS OF 1000 VOLTS ARE PRESENT WHEN THE REGULATOR IS OPERATING. DO NOT ATTEMPT REPAIR OR SERVICING WITHOUT FIRST REMOVING POWER FROM THE REGULATOR. THE USE OF LOCK - OUT DEVICES IS RECOMMENDED FOR INSTALLATIONS WHERE THE POWER DISTRIBUTION PANEL IS N OT READILY VISIBLE FROM TH ...

  • Cooper Lighting 84700 - page 22

    9131 Rev. M 16 ...

  • Cooper Lighting 84700 - page 23

    9131 Rev. M 17 ...

  • Cooper Lighting 84700 - page 24

    9131 Rev. M TABLE 4 - 2 TROUBLESHOOTING PROCEDURE PROBLEM POSSIBLE CAUSE TEST CORRECTIVE ACTION CSC does not operate in remote (all circuits) Power source not energized Verify voltage is present at TB1 - L, LN Resto re power Blown fuse Check F1 Replace fuse Broken wire Check wiring harness Repair or replace harness assy One or two circuits of CSC d ...

  • Cooper Lighting 84700 - page 25

    9131 Rev. M PROBLEM POSSIBLE CAUSE TEST CORRECTIVE ACTION No distinct delay between high voltage relay actions Defective timing circuit card ------ Replace the timing circuit card. Observe all precautions of para. 4.2 when replacing the timing card High voltage Relay module at end of rated life ------ Replace the high voltage relay module or relay ...

  • Cooper Lighting 84700 - page 26

    9131 Rev. M SECTION 5 PARTS LIST 5.1 SCOPE The following Parts List provides ordering data for all repairable or replaceable components and assemblies. 5.1.1 List of Figures Figure 5- 1 Component I dentification, 84700 - 1 or - 2 Figure 5- 2 Component Identification, 84700 - 3 or - 4 5.1.2 List of Tables Table 5 - 1 Circuit Selector Parts List, 847 ...

  • Cooper Lighting 84700 - page 27

    9131 Rev. M 21 ...

  • Cooper Lighting 84700 - page 28

    9131 Rev. M 21a ...

  • Cooper Lighting 84700 - page 29

    9131 Rev. M 22 ...

  • Cooper Lighting 84700 - page 30

    9131 Rev. M TABLE 5 - 1 PARTS LIST, 84700 - 1 OR - 2 ITEM NO REFERENCE DESIGNATION QUANTITY - 1 - 2 DESCRIPTION CROUSE HINDS PART NUMBER 1 1 1 Cabinet 31525 2 1 1 Base Plate 30858 3 1 1 Low Voltage Panel 31973 4 1 1 Circuit Card assembly 31955 - 1 5 1 2 Relay Module Assembly 30848 - 1 6 1 1 Dead Front Plate 30832 7 1 1 Dead Front Bracket 30828 *8 K ...

  • Cooper Lighting 84700 - page 31

    9131 Rev. M TABLE 5 - 2 PARTS LIST, 84700 - 3 OR - 4 ITEM NO REFERENCE DESIGNATION QUANTITY - 3 - 4 DESCRIPTION CROUSE HINDS PART NUMBER 1 1 1 Cabinet 31530 2 1 1 Base Plate 30859 3 1 1 Low Voltage Panel 31974 4 1 1 C ircuit Card assembly 31955 - 2 5 2 2 Relay Module Assembly 30848 - 1 6 1 1 Dead Front Plate 30833 7 1 1 Dead Front Bracket 30829 *8 ...

  • Cooper Lighting 84700 - page 32

    9131 Rev. M SECTION 6 OPTIONS 6.1 SCOPE The follo wing listing provides parts ordering data and customer installation data. 6.2 OPTION - 2 The part number for the 220VAC transformer is 10047 - 1444. Customer primary input connections are at points H1 and H4 on the transformer; see Figures 6 - 2A and 6 - 2B. See Figure 5 - 1 or 5 - 2 for transformer ...

  • Cooper Lighting 84700 - page 33

    9131 Rev. M 6.9 Option - 9 Item 11 P/N is 10047 - 1878. Item 12 P/N is 46 - 192 - 5X/D - 8. The part number for the interlock switch harness is 31985 - 1. Item 5 P/N is the same as for standard 84700 - 2 module, except option - 9 labeling required and, if present, remove lead with tag "THIS JUMPER TO BE REMOVED ONLY WHEN CONNECTING LOAD TO THE ...

  • Cooper Lighting 84700 - page 34

    9131 Rev. M TABLE 6 - 1 PART NUMBE R USED ON 31955 - 1 84700 - 1 or - 2 31955 - 2 84700 - 3 or - 4 31955 - 3 84700 - 2 - 9 31955 - 4 84700 - 1 or - 2 w/Opt. - 8 31955 - 5 84700 - 3 or - 4 w/Opt. - 8 31955 - 6 84700 - 1 or - 2 w/Opt. - 3 31955 - 7 84700 - 3 or - 4 w/Opt. - 3 31955 - 8 84700 - 2 - 3, - 9 31955 - 9 84700 - 1 or - 2 w/Opts. - 3 & - ...

  • Cooper Lighting 84700 - page 35

    9131 Rev. M 28 ...

  • Cooper Lighting 84700 - page 36

    9131 Rev. M 29 ...

  • Cooper Lighting 84700 - page 37

    9131 Rev. M 30 ...

  • Cooper Lighting 84700 - page 38

    9131 Rev. M 31 ...

  • Cooper Lighting 84700 - page 39

    9131 Rev. M 32 ...

  • Cooper Lighting 84700 - page 40

    9131 Rev. M 33 ...

  • Cooper Lighting 84700 - page 41

    9131 Rev. M 34 ...

Fabbricante Cooper Lighting Categoria Switch

I documenti che otteniamo dal fabbricante del dispositivoCooper Lighting 84700 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Cooper Lighting
- manuali per l’uso 84700
- schede prodotto Cooper Lighting
- opuscoli
- o etichette energetiche Cooper Lighting 84700
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Cooper Lighting 84700.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Cooper Lighting 84700, manuali di manutenzione, brevi manuali o manuali utente Cooper Lighting 84700. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Cooper Lighting 84700.

Manuali per l’uso simili

Manuale completo del dispositivo Cooper Lighting 84700, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Cooper Lighting 84700 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Cooper Lighting 84700.

Il manuale per l’uso completo Cooper Lighting, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Cooper Lighting 84700 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Cooper Lighting 84700, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Cooper Lighting 84700 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Cooper Lighting 84700 - che ci dovrebbe aiutare nei primi passi durante l'uso Cooper Lighting 84700
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Cooper Lighting 84700
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Cooper Lighting 84700 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Cooper Lighting 84700?

Utilizza il modulo sottostante

Se non hai risolto il problema con Cooper Lighting 84700 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Cooper Lighting 84700 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)