Italiano dropdown-ico

Manuale per l’uso Honeywell CHG-120

24 pagine 1.02 mb
Scarica

Vai alla pagina of 24

Summary
  • Honeywell CHG-120 - page 1

    CHG-120 Battery Charger Instruction Manual Fire Contr ol Instruments 14-16 Southwest Park W estwood, MA 02090 , USA Phone: (781) 471- 3000 F AX: (781) 471-3099 FCI P/N 9000-0572 Document 52459 1 1/22/04 Revision: A PN 52459:A ECN 04-691 ...

  • Honeywell CHG-120 - page 2

    LimW arLg.p65 01/10/2000 An automatic fire alarm system –typically made up of smoke detectors, heat detectors, manual pull stations, audible warn- ing devices, and a fire alarm control with remote notification capability–can provide early warning of a developing fire. Such a system, however, does not assure protection against property damage or ...

  • Honeywell CHG-120 - page 3

    LimW arLg.p65 01/10/2000 WARNING - Several different sources of power can be con- nected to the fire alarm control panel. Disconnect all sources of power before servicing. Control unit and associated equip- ment may be damaged by removing and/or inserting cards, modules, or interconnecting cables while the unit is energized. Do not attempt to insta ...

  • Honeywell CHG-120 - page 4

    Notes ...

  • Honeywell CHG-120 - page 5

    CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 v T able of Contents Introduction to the Charger ............ .............. ........... .............. ............ .............. .......... 1 Overview ............... ........... ........... .............. ............ ........... .............. ........... .............. .. 1 Specifica ...

  • Honeywell CHG-120 - page 6

    vi CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 Notes ...

  • Honeywell CHG-120 - page 7

    CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 1 1. Intr oduction to the Charger Overview The CHG-120 battery charger is designed to charge lead-acid batteries that provide emergency standby power for a Fire Alarm Control Panel (F ACP). T wo 12-volt batterie s are always used in series to supply 24 VDC nominal. The following list gi ve ...

  • Honeywell CHG-120 - page 8

    Introduction to the Charger Specifications 2 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 The charge r also provides the following features: • AM-1 ammeter (0-10A) ordered separat ely • VM-1 voltmeter (0-50 V) ordered separately • Disable local ground fault d etection • Selectable lo ss of AC delay (8 o r 16 hours) Specificat ...

  • Honeywell CHG-120 - page 9

    CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 3 2. Installing the Charger Overview This section contains instruction s and illustrations for installin g the char ger , divided into the following topics: Installation Precautions and S tandards Battery Precautions When installing the charger , observe the fo llowing precautions:  Obs ...

  • Honeywell CHG-120 - page 10

    Installing the Charger Char ger Connections, Jumpers, and Switches 4 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 Installation S tandards An installer should be familiar with the following standards: • NEC Article 300 W iring Methods. • NEC Article 760 Fire Protective Signaling Systems. • Applicable Local and State Building Cod ...

  • Honeywell CHG-120 - page 11

    Connecting AC Power to the Charger Installing the Charger CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 5 Connecting AC Power to the Charger Caution: Before connecting AC power to the charge r—make sure to set the V oltage Select Switch (SW1) on the charger (Figure 2) to match your AC power source (120 V AC or 240 V AC). Figure 3 sh ...

  • Honeywell CHG-120 - page 12

    Installing the Charger Connecting Batteries to the Char ger 6 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 Connecting Batteries to the Charger Overview you can connect 25 AH –120 AH batt eries to the charger . This section provides illustrations and instructions for connecting tw o batteries or for connectin g four batteries. Conne ...

  • Honeywell CHG-120 - page 13

    Connecting Batteries to the Charger Installing the Charger CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 7 Connecting Four Batteries Figure 6 shows how to connect four 55 AH batteries to the charger: Figure 6 Connecting Four Batteries to a Charger T able 4 contains instructions for conn ecting four batteries to the char ger: Wa r n i ...

  • Honeywell CHG-120 - page 14

    Installing the Charger Mounting the Charger 8 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 Mounting the Charger Mounting the Charger into a CAB-X3 Series Cabinet Y ou can mount a charger into the bottom row of a CAB-X3 Series Cabinet, as lo ng as the char ger is within 20 feet of the load. T ypically , a charger mounts into the lower ...

  • Honeywell CHG-120 - page 15

    Mounting the Charger Installing the Charger CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 9 Mounting the Charger into a BB-55 Battery Box Y ou can also mount a charger into a BB-55 battery box, as long as the BB-55 is with in 20 feet of the load. Note that a charger takes up half the space of the BB-55. This mean s you only have room ...

  • Honeywell CHG-120 - page 16

    Installing the Charger Connecting the C har ger t o a Load 10 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 Connecting the Charger to a Load This section provides two applications for co nnecting a charger to a load. While connecting a charger to a load, observe the following precautions: • Make sure all power sources are off to the ...

  • Honeywell CHG-120 - page 17

    Connecting the Charger to a Load Installing the Charger CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 11 Adding the Charger for Additional Current Due to internal fuses, the maximum alarm current that can be drawn from the batteries and passed through th e char ger ’ s two output circuits is limited to 10 amps maximum (each circuit) ...

  • Honeywell CHG-120 - page 18

    Installing the Charger Configuring the Charger 12 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 Configuring the Charger Y ou can configure the charger to do the following: • Set the charger input power (see Figure 3 on page 5). • Delay AC loss reporting (for Central Station applications); and • Disable charger ground fault detec ...

  • Honeywell CHG-120 - page 19

    Trouble and Form-C Relay Con nections (Optional) Installing the Charger CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 13 T rouble and Form-C Relay Connections (Optional) T able 5 contains descriptions of optional conn ectors on the charger: Figure 13 shows charger trouble and Form-C relay connections: Figure 13 Connections for Optiona ...

  • Honeywell CHG-120 - page 20

    Installing the Charger Installing Optional Met ers 14 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 Installing Optional Meters Y ou can also order and install a ammeter (AM- 1) or voltmeter (VM-1) for use with the charger . If mounting an AM-1 or a VM-1, mount the meter to a BB-55 as shown in Figure 14. T able 6 contains descriptions ...

  • Honeywell CHG-120 - page 21

    CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 15 3. Operating the Charger Overview This section contains information on starti ng the charger , interpreting the LED Status Indicators on the charger , and no rmal operation of the charger . S tarting the Charger Wa r n i n g : Before starting the charger , do the following:  Follow t ...

  • Honeywell CHG-120 - page 22

    Operating the Charger Normal Operation 16 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 T able 7 shows the conditions that cause the char ger LEDs to come on: Normal Operation The CHG-120 charges batteries at 4.5 A. When batteries are fully charged, the char ger maintains a float charge of 27.6 VDC at a trickle charge rate of less tha ...

  • Honeywell CHG-120 - page 23

    CHG-120 Instruction 11/2 2/04 PN: 5245 9:A FCI P/N:90 00-0572 17 A AC loss reporting 1, 4, 12 AC Power 4 AC power connections 5 AM-1 installation 14 AM-1 ammeter 2 AM-1 connector 4 B batteries 1 battery 25 AH connection 6 connecting four 7 battery charger 1 battery connections 4, 6 battery replacement 2 battery sizes 2 C charger 1 additional curren ...

  • Honeywell CHG-120 - page 24

    LimW arLg.p65 01/10/2000 The manufacturer warrants its products to be free from defects in materials and workmanship for eighteen (18) months from the date of manufacture, under normal use and service. Products are date-stamped at time of manufacture. The sole and exclusive obligation of the manufacturer is to repair or replace, at its option, free ...

Fabbricante Honeywell Categoria Automobile Battery Charger

I documenti che otteniamo dal fabbricante del dispositivoHoneywell CHG-120 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Honeywell
- manuali per l’uso CHG-120
- schede prodotto Honeywell
- opuscoli
- o etichette energetiche Honeywell CHG-120
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Honeywell CHG-120.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Honeywell CHG-120, manuali di manutenzione, brevi manuali o manuali utente Honeywell CHG-120. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Honeywell CHG-120.

Manuali per l’uso simili

Manuale completo del dispositivo Honeywell CHG-120, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Honeywell CHG-120 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Honeywell CHG-120.

Il manuale per l’uso completo Honeywell, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Honeywell CHG-120 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Honeywell CHG-120, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Honeywell CHG-120 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Honeywell CHG-120 - che ci dovrebbe aiutare nei primi passi durante l'uso Honeywell CHG-120
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Honeywell CHG-120
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Honeywell CHG-120 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Honeywell CHG-120?

Utilizza il modulo sottostante

Se non hai risolto il problema con Honeywell CHG-120 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Honeywell CHG-120 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (1)

alejandro rodriguez

hola tengo un problema para configurar mi maquina para usarla con el control remoto aun siguiendo los pasos en el manual hay alguna forma de hacerle un reset? porque en cuanto calienta solo comienza a arrojar humo y no para