Italiano dropdown-ico

Manuale per l’uso Buffalo Technology iSCSI

50 pagine 3.02 mb
Scarica

Vai alla pagina of 50

Summary
  • Buffalo Technology iSCSI - page 1

    User Manual TeraStation iSCSI TS-ITGL/R5 www . buffa lote ch . c o m v1.4 ...

  • Buffalo Technology iSCSI - page 2

    2 Introduction Congratulations on your new TeraStation! Your TeraStation iSCSI is a huge block of iSCSI storage, ready to add to your server or PC via ordinary wired Ethernet connections. This guide will help you congure it. There are many ways to congure and use iSCSI storage products like the TeraStation. In this guide we give one example o ...

  • Buffalo Technology iSCSI - page 3

    3 Table of Contents TeraStation Layout............................................................ 4 Installation ....................................................................... 7 Conguration GUI .......................................................... 15 Login ....................................................................... 16 ...

  • Buffalo Technology iSCSI - page 4

    4 Layout Power Switch Door Lock (Turn counter- clockwise to release) Door opens for access to hard drives. Display Mode Switch ...

  • Buffalo Technology iSCSI - page 5

    5 Hard Drives (Squeeze tabs to release) Layout Init Button returns settings to factory defaults. ...

  • Buffalo Technology iSCSI - page 6

    6 USB in Layout Power Cable (to outlet or surge protector) UPS Ethernet (to NIC, Router, or Switch ...

  • Buffalo Technology iSCSI - page 7

    7 Insert the TeraNavigator CD into your computer’s CD-ROM drive. On a PC, setup should automatically launch. If it does not, manually launch setup.exe by pressing Start and selecting the Run... option. When the Run dialog opens, type d:TSnavi.exe (where d is the drive letter of your CD-ROM drive). Press OK to continue. Begin by connecting your T ...

  • Buffalo Technology iSCSI - page 8

    8 Press the Begin Installation button to begin. Easy Setup will step you through physically connecting your TeraStation. It will then install software. Advanced Setup skips the connection tutorial and goes directly to installing software. Installation ...

  • Buffalo Technology iSCSI - page 9

    9 If your TeraStation is connected correctly when you get to this window, it will be highlighted in the drop-down list. If you have multiple units to set up, select the correct TeraStation from the list. Select First Setup for the initial installation. To install the software on additional computers, chose Additional Setup . Installation ...

  • Buffalo Technology iSCSI - page 10

    10 Once the TeraStation is installed, you’ll need to install the iSCSI connection tool. Click Next , then continue to click Next , stepping through the menus until the iSCSI connection tool is installed. Click Yes to launch the iSCSI connection tool. Installation ...

  • Buffalo Technology iSCSI - page 11

    11 If the TeraStation has more than one volume, choose the volume you want to connect to from the drop down list. Check Resume connection at start up. Click Connect . Repeat to add additional volumes if desired. Installation Make sure that your ISCSI TeraStation is selected in the Target product window. Click Register the iSCSI Hard Disk , and then ...

  • Buffalo Technology iSCSI - page 12

    12 Installation If Disk Management does not open automatically, you may launch it manually. From the Setup menu at the top of the window, choose Launch Disk Management . Each connected volume from your ISCSI TeraStation now appears as a hard drive in Disk Management. ...

  • Buffalo Technology iSCSI - page 13

    13 Installation The Initialize and Convert Disk Wizard will open. Use it to convert your new volumes to dynamic volumes. Put a checkmark next to each of your disks and click Next to step through the menu. Right-click on the volume in Disk Management and click New Volume to start the New Volume Wizard . Click Next . ...

  • Buffalo Technology iSCSI - page 14

    14 Choose your desired volume type. Use Simple if you have only one volume to mount. Spanned and Striped volumes require multiple disk volumes to create. Click Next when ready. Add all dynamic disks that will be included in the volume to the Selected column by highlighting them and then clicking the Add button. Installation ...

  • Buffalo Technology iSCSI - page 15

    15 Installation Choose your desired drive letter. Click Next . Choose your desired format and volume label. Click Next . Your new volume is installed and ready to use! ...

  • Buffalo Technology iSCSI - page 16

    16 The Conguration GUI is where most of the TeraStation’s settings can be changed. To access it, type the IP address of your TeraStation into the URL bar of a browser running on a computer connected to the same network as the TeraStation. Conguration GUI ...

  • Buffalo Technology iSCSI - page 17

    17 The login prompt will appear. Enter admin for the user name. Until you change it, the password for the admin account will be password . Press the OK button when nished. User name: admin Password: password Advanced Settings ...

  • Buffalo Technology iSCSI - page 18

    18 Welcome to the conguration GUI for the TeraStation! You are now at Home . Notice that the Home button is lit up in yellow. You can navigate this menu by clicking on the buttons at the left of the screen. Here at “Home”, you can see basic information about your TeraStation’s current conguration. You may close this screen by clicking L ...

  • Buffalo Technology iSCSI - page 19

    19 You may modify your TeraStation’s hostname and description under Hostname Setup . A friendly, easy-to-remember name (e.g. “TeraStation”) is recommended. Make sure that the date and time are correct in Date and Time Setup . To synchronize time settings with those in your computer, press Use Local Time . To have your system time automaticall ...

  • Buffalo Technology iSCSI - page 20

    20 By default, the admin password is “password”. Change it to something more secure here. Admin Password Conguration GUI ...

  • Buffalo Technology iSCSI - page 21

    21 Network (IP Address Properties) In most networks, TeraStation will get its IP Address automatically from a DHCP server. You may disable DHCP here. If DHCP is disabled and an IP Address is not set manually, it will default to 192.168.11.150 . The TeraStation’s IP Address , Subnet Mask , Default Gateway Address , and DNS Server address may all b ...

  • Buffalo Technology iSCSI - page 22

    22 Disk Management (Drive Properties) This page shows the current properties of your hard drives and RAID Arrays. To change these settings, click on RAID Setup at left. Conguration GUI ...

  • Buffalo Technology iSCSI - page 23

    23 TeraStation uses RAID (“Redundant Array of Independent Disks”) technology to control the four hard drives in your TeraStation. RAID may be congured several ways: RAID 0 - All four drives are combined into one large, fast drive, giving the maximum capacity for your TeraStation. This size is the one listed on your TeraStation’s box and sh ...

  • Buffalo Technology iSCSI - page 24

    24 Disk Management (RAID Setup) This page shows your current RAID arrays. You may delete old arrays or create new ones by clicking on the underlined RAID Array # under RAID Array Conguration . The RAID Scanning Settings set a specic time for the TeraStation to scan and inspect its RAID arrays. It is recommended to set a time where the TeraSta ...

  • Buffalo Technology iSCSI - page 25

    25 Disk Management (Disk Erase) Disk Erase removes all data from the selected disk. This may take several hours to complete. It cannot be undone. Conguration GUI ...

  • Buffalo Technology iSCSI - page 26

    26 Volume Settings Here you can enable or disable volumes, shares, and folders. Conguration GUI ...

  • Buffalo Technology iSCSI - page 27

    27 Maintenance (Notication) If your TeraStation is remotely managed, you may choose to receive nightly status reports and be notied of any disk events by email. To set this up, enable Mail Notication and enter the IP Address of your SMTP server* in the SMTP Server Address eld. Select a Subject line for the emails (i.e. “TeraStation St ...

  • Buffalo Technology iSCSI - page 28

    28 Maintenance (UPS Settings) You may enable Synchronize with UPS and UPS Shutdown Conditions from this page. Consult your Uninterruptable Power Supply’s documentation for further information about setting up your UPS system. Buffalo Technology recommends the use of APC SmartUPS Serial Uninterruptable Power Supplies. Other UPSs may use different ...

  • Buffalo Technology iSCSI - page 29

    29 UPS Conguration Maintenance (UPS Settings) This is TeraStation’s serial port pin assignment for serial UPS products. ...

  • Buffalo Technology iSCSI - page 30

    30 Maintenance (Alert Settings) Alerts can be congured on the TeraStation to make audible noises when a problem is detected. Along with the audible noise, alert emails will be sent out if Mail Notication was properly congured. Please select the features you would like to receive an audible sound alert from and then press the Apply button. ...

  • Buffalo Technology iSCSI - page 31

    31 Maintenance (Status LCD) The Status LCD Setup allows conguration for the LCD display on the front of TeraStation. Please select the type of information that the front panel should display from the LCD Display Items . Automatically Switch LCD Items tells the TeraStation to cycle through the selected display items every 10 seconds. Disabling th ...

  • Buffalo Technology iSCSI - page 32

    32 Maintenance (Syslog Transfer) Check Enable to allow system logs to be transferred. Press Apply once all of the settings have been congured. Conguration GUI ...

  • Buffalo Technology iSCSI - page 33

    33 Maintenance (Shutdown) From the Shutdown page, press Apply to shutdown TeraStation. This has the same function as holding down the power button on the front of TeraStation, but may be done remotely. Turning on the TeraStation after a shutdown requires a physical button push on the front of TeraStation. The Restart Now button simply reboots the T ...

  • Buffalo Technology iSCSI - page 34

    34 Maintenance (Initialization) Initialization is a reset procedure that restores all settings back to the default, out of box, conguration. All conguration, users, groups, and backup jobs are lost, but actual data and shares on the hard are NOT lost. If you want all data to be erased, reformat the drive. Specify whether the TeraStation shall ...

  • Buffalo Technology iSCSI - page 35

    35 This page shows you the System Information for your TeraStation. Firmware updates are occasionally available from www.buffalotech.com for the TeraStation Pro. These must be executed from a Windows PC on the same network. Your router, switch, or hub should pass through ports 8873 and 22939 for this to work (most do). Conguration GUI ...

  • Buffalo Technology iSCSI - page 36

    36 System Status (USB Details) This page shows you details on USB hard drives and UPSs plugged into your TeraStation. Conguration GUI ...

  • Buffalo Technology iSCSI - page 37

    37 System Status (Drive Properties) This page shows you the properties of all hard drives and RAID arrays in and attached to your TeraStation. Conguration GUI ...

  • Buffalo Technology iSCSI - page 38

    38 System Status (Network Information) This page shows you the System Information for your network connection. Conguration GUI ...

  • Buffalo Technology iSCSI - page 39

    39 Log Information This page lets you save or display system log information. Choose the log you want from the Log Type dropdown and click Save . The dialog will let you save or display (“Open”) the logle. Conguration GUI ...

  • Buffalo Technology iSCSI - page 40

    40 If TeraStation encounters a disk error, it will be reported in the TeraStation status on the top of any of the Web-Based conguration screens. Run a Disk Scan in the event of this error. If that does not resolve the problem, a format is recommended. Formatting the drive will delete all of the data on it, so back up any data you can before form ...

  • Buffalo Technology iSCSI - page 41

    41 Error Code Description Alert Sound E00 MPU error: Main MPU is not responding. A E01 Error on DRAM DATA LIN A E02 Error on DRAM ADDRESS LINE A E03 Error on RTC CHIP A E04 Failed to load kernel (FLASH error) A E10 UPS AC LINE FAIL Error B E11 FAN Error: Fan rotation speed is low or fan is stopped. B E12 Cooling Error: Cooling by fan cannot catch u ...

  • Buffalo Technology iSCSI - page 42

    42 Replacing a Hard Drive Turn the key counter-clockwise to open drive door. Squeeze the tabs gently and swing the tray latch upward. The hard drive tray will now slide out. ...

  • Buffalo Technology iSCSI - page 43

    43 Gently push down on the two tabs to release the plug. Lower the drive carefully to the work surface. ...

  • Buffalo Technology iSCSI - page 44

    44 Pull the plug straight out to remove the drive. To remove the hard drive from its cage, set the assembly on a soft surface and remove these four screws. ...

  • Buffalo Technology iSCSI - page 45

    45 Install a new hard drive by doing the same steps in reverse order: Begin by screwing the new hard drive into the cage. Plug the power/data connector into the hard drive. Slide the hard drive cage back into the TeraStation. Press the latch down to lock the hard drive cage in place. ...

  • Buffalo Technology iSCSI - page 46

    46 Technical Specications LAN Standards: IEEE 802.3u 100BASE-TX; IEEE 802.3 10BASE-T Transmission Types: 1000Mbps/100Mbps/10Mbps; 100BASE-TX 4B/5B, MLT-3;10BASE-T Manchester Coding Access Media: CSMA/CD Media Interface: RJ-45 USB Standard: USB 2.0 Hi-Speed (HS) Full-Speed (FS) Low-Speed (LS) USB Connector: USB A Connector (2) Data Transmission S ...

  • Buffalo Technology iSCSI - page 47

    47 Contact Information (North America) Buffalo Technology USA Inc. 11100 Metric Blvd, Suite 750 Austin, TX 78758 GENERAL INQUIRIES Monday through Friday 8:30am-5:30pm CST Direct: 512-794-8533 | Toll-free: 800-456-9799 | Fax: 512-794-8520 | Email: sales@ buffalotech.com TECHNICAL SUPPORT North American Technical Support by phone is available 24 hour ...

  • Buffalo Technology iSCSI - page 48

    48 Buffalo Technology UK Ltd. 2 Bracknell Beeches, Old Bracknell Lane Bracknell, Berkshire, SL1 4RD United Kingdom GENERAL INQUIRIES Email: sales@buffalo-technology.com TECHNICAL SUPPORT Buffalo Technology provides technical support in English, German, French, Italian, and Spanish. For opening hours and relevant telephone numbers, please go to www. ...

  • Buffalo Technology iSCSI - page 49

    49 Thank you for your interest in Buffalo products. Our GPL software delivery policy is outlined below. For each individual product and revision, please send one individually packaged self addressed padded CD shipping envelope, containing a blank CD-R to the following address: Buffalo Technology USA Inc. 11100 Metric Blvd., Suite 750 Austin, TX 787 ...

  • Buffalo Technology iSCSI - page 50

    50 Thank you for your interest in Buffalo products. Our GPL software delivery policy is outlined below. For each individual product and revision, please send one individually packaged self addressed padded CD shipping envelope, containing a blank CD-R to the following address: Buffalo Technology Ireland Ltd Free Zone East, Shannon, Co. Clare Irelan ...

Fabbricante Buffalo Technology Categoria Switch

I documenti che otteniamo dal fabbricante del dispositivoBuffalo Technology iSCSI possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Buffalo Technology
- manuali per l’uso iSCSI
- schede prodotto Buffalo Technology
- opuscoli
- o etichette energetiche Buffalo Technology iSCSI
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Buffalo Technology iSCSI.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Buffalo Technology iSCSI, manuali di manutenzione, brevi manuali o manuali utente Buffalo Technology iSCSI. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Buffalo Technology iSCSI.

Manuali per l’uso simili

Manuale completo del dispositivo Buffalo Technology iSCSI, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Buffalo Technology iSCSI dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Buffalo Technology iSCSI.

Il manuale per l’uso completo Buffalo Technology, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Buffalo Technology iSCSI - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Buffalo Technology iSCSI, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Buffalo Technology iSCSI che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Buffalo Technology iSCSI - che ci dovrebbe aiutare nei primi passi durante l'uso Buffalo Technology iSCSI
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Buffalo Technology iSCSI
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Buffalo Technology iSCSI in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Buffalo Technology iSCSI?

Utilizza il modulo sottostante

Se non hai risolto il problema con Buffalo Technology iSCSI con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Buffalo Technology iSCSI è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)