-
Magnadyne MV-VCRUSER02 - page 1
Owner’ s Manual In Vehicle Entertainment System with Drop Down 6.4” and 10.4" TV Screen, Remote Control, Hi-Fi VCR and Mono VCR with Wireless Headphones Patent Pending For Operation Assistance or T echnical Assistance after Reading the T roubleshooting Guide in this Manual, Please Call T oll Free (800) 638-3600 TM ...
-
Magnadyne MV-VCRUSER02 - page 2
Important Safeguards 1. Read Instructions: All the safety and operating instruc- tions should be read before operating any of the compo- nents in the Movievision TM system. 2. Retain Instructions: The owners manual should be retained for future reference of operation. Leave this man- ual in the vehicle. 3. Follow Instructions: Failure to follow the ...
-
Magnadyne MV-VCRUSER02 - page 3
Video Cassette T ape Information This VCR will operate with any cassette that has the VHS mark. For best results, we recommend the use of high-quality video cassette. Do not use poor quality or damaged tapes. Precautions: • Avoid Moisture. Moisture condensation may occur on the tape if it is moved from a cold location to a warm location or visa v ...
-
Magnadyne MV-VCRUSER02 - page 4
Remote Control Batter y Install / Replace VCR Controls POWER EJECT STOP REC REW PLAY FF POWER REC SLP HEAT DEW R Cassette Compartment For cassette insertion/removal POWER Turns VCR on and off EJECT Ejects cassette REC Starts recording LED Indicators STOP Stops tape movement REW Rewinds tape (from stop mode) F.F. Fast forwards tape (from stop mode) ...
-
Magnadyne MV-VCRUSER02 - page 5
VCR T ape Playback 1. T urn “ ON ” the ignition switch and power will be applied to the Movievision TM system. 2. Release the viewing screen from it ’ s folded and locked position in the viewing pod. 3. Point the remote at the viewing screen and press “ POWER ” or press “ POWER ” on the front panel of the VCR. 4. Insert a VHS tape int ...
-
Magnadyne MV-VCRUSER02 - page 6
Recording 1. T urn “ ON ” the ignition switch and power will be applied to the Movievision TM system. 2. Release the viewing screen from it ’ s folded and locked position in the viewing pod. 3. Point the remote at the viewing screen and press “ POWER ” or press “ POWER ” on the front panel of the VCR . 4. Insert a VHS tape into the ta ...
-
Magnadyne MV-VCRUSER02 - page 7
6.4" Viewing Screen Controls and Functions 1. Infrared Eye Point the remote control in the direction of the Infrared Eye when accessing the functions provided by the remote control. 2. Viewing Screen Release T o release the screen, push inward on the Movievision TM logo and pull downward. Place the screen to the desired viewing position. T o l ...
-
Magnadyne MV-VCRUSER02 - page 8
6.4" Viewing Screen Controls and Functions 7. T ransmitter Frequency Selection: The Movievision TM viewing screen transmits a signal that is received by the Movievision TM headphones and can also be received by the vehicle ’ s car radio. There are 3 fre- quencies available for use but only one can be used at a time. When you are listening to ...
-
Magnadyne MV-VCRUSER02 - page 9
10.4" Viewing Screen Controls and Functions 1. Infrared Eye Point the remote control in the direction of the Infrared Eye when accessing the functions provided by the remote control. 2. Viewing Screen Release T o release the screen, push inward on the Movievision TM logo and pull downward. Place the screen to the desired viewing position. T o ...
-
Magnadyne MV-VCRUSER02 - page 10
10.4" Viewing Screen Controls and Functions Backlight Adjustment: Adjusts the intensity of the rear panel lighting. For best results, this should be not be adjusted from the factory setting (50 % setting). MENU SEL. ☛ 7. T ransmitter Frequency Selection: The Movievision TM viewing screen transmits a signal that is received by the Movievision ...
-
Magnadyne MV-VCRUSER02 - page 11
Brightness Adjustment: Adjusts the amount of white light in the image on the screen. MENU SEL. ☛ Step 1 U SEL. ☛ ☛ Step 3 BRT Press the Menu Button Once Screen Display Press the Up and Down Buttons to Adjust the Brightness Screen Display MENU SEL. ☛ Step 4 Press the Menu Button T wice to Exit. Screen Display MENU SEL. ☛ Step 2 Press the S ...
-
Magnadyne MV-VCRUSER02 - page 12
Saturation Adjustment Adjusts the intensity of the colors on the screen from black and white conditions to full color condition.. MENU SEL. ☛ Step 1 U SEL. ☛ ☛ Step 3 SA T Press the Menu Button Once Screen Display Press the Up and Down Buttons to Adjust the Saturation Screen Display MENU SEL. ☛ Step 4 Press the Menu Button T wice to Exit. S ...
-
Magnadyne MV-VCRUSER02 - page 13
Reset When used will reset all the screen settings back to manufacturer default settings. MENU SEL. ☛ Step 1 U SEL. ☛ ☛ Step 3 Press the Menu Button Once Screen Display Press Either the Up or Down Buttons to Reset Screen Display MENU SEL. ☛ Step 4 Press the Menu Button T wice to Exit. Screen Display MENU SEL. ☛ Step 2 Press the Select But ...
-
Magnadyne MV-VCRUSER02 - page 14
14 Replacing Domelight Bulbs: T o replace a domelight bulb, repeat the following procedure. Warning! in some cases, the domelight maybe hot, proceed with caution. 1. Use your fingernail to pull the lever at the end of the domelight lens forward and downward this will release the lens to expose the bulb. 2. Use a pencil to pry out one end of the bul ...
-
Magnadyne MV-VCRUSER02 - page 15
15 Headphone Operation Y our Movievision TM entertainment system is supplied with two (2) Movievision TM headphones. The correct operation, care and maintenance of the headphones is critical to their ability to provide the user with a lifetime of operation. Misuse, abuse and neglect of the headphones will result in poor performance and premature fa ...
-
Magnadyne MV-VCRUSER02 - page 16
16 4. Connecting a Second Set of Headphones Y our Movievision TM headphones have a plug receptacle locat- ed at the bottom of the “ R ” ear pad. (4) A second set of per- sonal type headphones (Must have 3.5 mini male type plug) can be connected at this point. Note: When a second pair of headphones are attached, the tuning and audio level is con ...
-
Magnadyne MV-VCRUSER02 - page 17
Digital Headphone Operation 1. T urn On the Headphones: T o turn on the headphones, press the ” PWR ” button on the right side ear pad. The digital display will show radio station digits when the headphone is on. 2. T uning an FM Radio Station: A. Press the ” UP ” or ” DOWN ” button to manually tune in an FM radio station. B. Press and ...
-
Magnadyne MV-VCRUSER02 - page 18
18 Servicing: Should your Movievision TM VCR become inoperative, do not try to correct the problem by yourself. There are no user serviceable parts inside. Remove the unit from the vehicle and take it to an authorized Movievision TM service facility . Cabinet Cleaning: The front panel of the Movievision TM VCR can be cleaned with a soft cloth that ...
-
Magnadyne MV-VCRUSER02 - page 19
ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within 1 year from the date of sale to you, repair , replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials or workmansh ...
-
Magnadyne MV-VCRUSER02 - page 20
MV-VCRUSER02 Rev . A 2-6-02 © Copyright 2002 Magnadyne Corporation Replacement Parts Order Form Send Orders T o: Magnadyne Corporation We Accept Checks, Money Orders, Visa and Master Card A TTN: Consumer Parts Sales Make Checks Payable to: Magnadyne Corporation P .O. Box 5365 Carson, CA 90749-5365 SHIP TO: (No P .O. Boxes) LAST NAME FIRST NAME INI ...
Hai una domanda su Magnadyne MV-VCRUSER02?
Utilizza il modulo sottostante
Se non hai risolto il problema con Magnadyne MV-VCRUSER02 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Magnadyne MV-VCRUSER02 è probabile che voglia condividere il modo di risolverlo.