-
Canon LV-5200 - page 1
E English Multimedia Pr ojector Owner’ s Manual L V -5200 ...
-
Canon LV-5200 - page 2
2 C A U T I O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTA ...
-
Canon LV-5200 - page 3
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions ...
-
Canon LV-5200 - page 4
4 COMPLIANCES The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. A C P ower Cor d for the United States and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has ...
-
Canon LV-5200 - page 5
5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 14 COMPUTER INPUT (RGB Scart 21-Pin Video Input) 22 VIDEO INPUT 31 SETTING 36 APPENDIX 38 PREP ARA TION 7 NOMENCHTOR 7 SETTING-UP THE PROJECTOR 8 CONNECTING AC POWER CORD 8 INSTALLING THE PROJECTOR IN PROPER POSITION 8 POSITIONING THE PROJECTOR 9 ADJUSTABLE FEET 9 MOUNTING THE LENS COVER ...
-
Canon LV-5200 - page 6
6 FEA TURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. It utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector accepts a wide range of video and computer inpu ...
-
Canon LV-5200 - page 7
7 PREP ARA TION NOMENCHT OR BO TT OM BACK HOT AIR EXHAUSTED ! Air blown from Exhaust Vents is hot. When using or installing the projector, the following precautions should be taken. ● Do not put any flammable object near these vents. ● Keep front grills at least 3 ’ (1m) away from any object, especially heat- sensitive objects. ● Do not tou ...
-
Canon LV-5200 - page 8
SETTING-UP THE PR OJECT OR 8 PREP ARA TION This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electric shock, do not plug into any other type of power ...
-
Canon LV-5200 - page 9
9 PREP ARA TION POSITIONING THE PR OJECT OR ● This projector is designed to project on a flat projection surface. ● The projector can be focused from 3.6 ’ (1.1m) ~ 31.8 ’ (9.7m). ● Refer to the figure below to adjust a screen size. ADJUST ABLE FEET Picture tilt and projection angle can be adjusted by rotating the Adjustable Feet. Project ...
-
Canon LV-5200 - page 10
10 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR ● Do not drop or bump the projector, otherwise damage or malfunction may result. ● When carrying the projector, use a suitable carrying case. ● Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to t ...
-
Canon LV-5200 - page 11
COMPUTER A UDIO IN S – VIDEO IN A UDIO IN VIDEO IN A UDIO OUT RGB IN-1 / OUT RESET CONTROL PORT Y Pb/Cb Pr/Cr R L R L DVI - I RGB IN-2 11 CONNECTING THE PR OJECT OR TERMINALS OF THE PR OJECT OR When controlling your computer with the Remote Control Unit of this projector, connect the mouse port of your computer to this connector. (Refer to P12.) ...
-
Canon LV-5200 - page 12
12 CONNECTING THE PR OJECT OR CONNECTING T O COMPUTER COMPUTER A UDIO IN S – VIDEO IN A UDIO IN VIDEO IN A UDIO OUT RGB IN-1 / OUT RESET CONTROL PORT Y Pb/Cb Pr/Cr R L R L DVI - I RGB IN-2 ON 1 DIP ON OFF 2 3 4 5 6 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF ...
-
Canon LV-5200 - page 13
13 CONNECTING THE PR OJECT OR CONNECTING T O VIDEO EQUIPMENT COMPUTER IN 1 DVI - I MONITOR OUT S – VIDEO COMPUTER IN 2 / (MONO) R – AUDIO IN – L VIDEO Y – Pb / Cb – Pr / Cr AUDIO IN COMPUTER R – – L AUDIO OUT USB CONTROL PORT RESET COMPUTER A UDIO IN S – VIDEO IN A UDIO IN VIDEO IN A UDIO OUT RGB IN-1 / OUT RESET CONTROL PORT Y Pb/C ...
-
Canon LV-5200 - page 14
14 BEFORE OPERA TION V OLUME PO WER FOCUS ZOOM D.ZOOM MENU MUTE LASER NO SHO W FREEZE A UTO PC ADJ. IMA GE P-TIMER INPUT KEYST ONE OPERA TION OF THE REMO TE CONTR OL UNIT ON ALL OFF ALL-OFF SWITCH Left Side When using the Remote Control Unit, turn this switch to “ ON. ” Turn it to “ ALL OFF ” when not in use. This Remote Control Unit emits ...
-
Canon LV-5200 - page 15
15 BEFORE OPERA TION To insure safe operation, please observe the following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace both batteries at the same time. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the Remote Control Unit to moisture, or heat. ● Do no ...
-
Canon LV-5200 - page 16
MENU SET FOCUS ZOOM INPUT KEY STONE PO WER IMA GE V ol + V ol – READ Y LAMP REPLA CE LAMP W ARNING TEMP . 16 BEFORE OPERA TION T OP CONTROLS AND INDICA T ORS Used to open or close ON- SCREEN MENU operation. (P17, 18) MENU BUTTON KEYSTONE BUTTON READY INDICATOR SET BUTTON POWER ON – OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR ...
-
Canon LV-5200 - page 17
17 BEFORE OPERA TION HO W T O OPERA TE THE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION Display ON-SCREEN MENU Press the MENU button to display the ON-SCREEN MENU (MENU BAR). The red frame is the POINTER. Move the POINTER (red frame) to the MENU ICON that you want to select by pressing the POINT RIGHT / LEFT buttons. Adjust the ITEM by pressin ...
-
Canon LV-5200 - page 18
18 BEFORE OPERA TION MENU B AR PC SYSTEM MENU Used to select computer system. (Refer to P22-24) IMAGE ADJUST MENU Used to adjust computer image. [Contrast / Brightness / Color / Tint / White balance (R/G/B) / Sharpness / Gamma / Auto grayscale / Auto fleshtone] (Refer to P29, 30) SETTING MENU Used to change settings of projector or reset Lamp Repla ...
-
Canon LV-5200 - page 19
19 B ASIC OPERA TION TURNING ON THE PR OJECT OR TURNING OFF THE PR OJECT OR Press the POWER ON-OFF button on the Top Control or on the Remote Control Unit, and the message “ Power off? ” appears on a screen. Press the POWER ON-OFF button again to turn off the projector. The LAMP Indicator lights bright and the READY Indicator turns off. After t ...
-
Canon LV-5200 - page 20
20 Press the FREEZE button on the Remote Control Unit to freeze the picture on-screen. To cancel the FREEZE function, press the FREEZE button again or press any other button. PICTURE FREEZE FUNCTION KEYST ONE ADJUSTMENT B ASIC OPERA TION ADJUSTING THE SCREEN Message disappears after 4 seconds. Message disappears after 4 seconds. Zoom Focus ZOOM ADJ ...
-
Canon LV-5200 - page 21
21 B ASIC OPERA TION Press the NO SHOW button on the Remote Control Unit to black out the image. To restore to normal, press the NO SHOW button again or press any other button. NO SHO W FUNCTION Message disappears after 4 seconds. No show Press the P-TIMER button on the Remote Control Unit. The timer display “ 00 : 00 ” appears and the timer st ...
-
Canon LV-5200 - page 22
22 COMPUTER INPUT (RGB Scar t 21-Pin Video Input) SELECTING THE INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Choose either Computer 1 or Computer 2 by pressing the INPUT button on the Top Control or on the Remote Control Unit. If the projector cannot reproduce a proper image, select the correct input source through the “ MENU OPERATION ” (see ...
-
Canon LV-5200 - page 23
23 COMPUTER INPUT SELECTING THE COMPUTER SYSTEM This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, or SXGA (refer to the “ COMPATIBLE COMPUTER SPECIFICATIONS ” on page 24). When selecting Computer, this projector automatically tunes to the incoming signal and projects a proper image without any spec ...
-
Canon LV-5200 - page 24
24 COMPUTER INPUT COMP A TIBLE COMPUTER SPECIFICA TIONS This projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 100 MHz of Dot Clock. NOTE : The projector may not project a proper image for D-SXGA 2 and D-SXGA 3 depending on some computers. Specifications are subject to change without notice. ON ...
-
Canon LV-5200 - page 25
25 COMPUTER INPUT PC ADJUSTMENT A UT O PC ADJUSTMENT The Auto PC Adjustment function automatically adjusts Fine sync, Total dots, Horizontal and Vertical picture position to conform to your computer. The Auto PC Adjustment function can be operated as follows. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT butto ...
-
Canon LV-5200 - page 26
26 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune to the display signals of most personal computers. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by the Multi-Scan system of this projector. If this happens, the projector cannot reproduce a proper im ...
-
Canon LV-5200 - page 27
27 COMPUTER INPUT NOTE ● Fine sync, Total dots, Display area (H/V) and Full screen cannot be adjusted when “ 1035i (HDTV) ” or “ 1080i (HDTV) ” is selected on PC SYSTEM Menu (P23). Selects the area displayed with this projector. Select the resolution at the display area dialog box. Display area Adjustment of the horizontal area displayed ...
-
Canon LV-5200 - page 28
28 COMPUTER INPUT PICTURE IMA GE ADJUSTMENT IMA GE LEVEL SELECT (MENU) Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the IMAGE SELECT Menu icon. 1 2 Press the POINT DOWN button to move the red frame pointer to the level that you want to set and then press the SET button. ...
-
Canon LV-5200 - page 29
29 COMPUTER INPUT Press the POINT LEFT/RIGHT but- tons to adjust the value. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE ADJUST Menu icon. 1 2 Press the POINT DOWN button to move the red frame pointer to the item that you want to adjust, and then press the SE ...
-
Canon LV-5200 - page 30
30 COMPUTER INPUT PICTURE SCREEN ADJUSTMENT This projector has the picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the SCREEN Menu icon. When Digital zoom + is selected, the ON-SCREEN ...
-
Canon LV-5200 - page 31
31 VIDEO INPUT SELECTING THE INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Choose Video by pressing the INPUT button on the Top Control or on the Remote Control Unit. If the projector cannot reproduce a proper video source, select correct input source through the “ MENU OPERATION ” (see below). Press the MENU button and the ON-SCREEN MENU will ...
-
Canon LV-5200 - page 32
32 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING THE VIDEO SYSTEM Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the AV SYSTEM Menu icon. Press the POINT DOWN button to move the red arrow pointer to the system that you want to s ...
-
Canon LV-5200 - page 33
33 VIDEO INPUT PICTURE IMA GE ADJUSTMENT IMA GE LEVEL SELECT (MENU) Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the IMAGE SELECT Menu icon. 1 2 Press the POINT DOWN button to move the red frame pointer to the level that you want to set and then press the SET button. Mo ...
-
Canon LV-5200 - page 34
34 VIDEO INPUT Press the POINT LEFT/RIGHT but- tons to adjust the value. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the IMAGE ADJUST Menu icon. 1 2 Press the POINT DOWN button to move the red frame pointer to the item that you want to adjust and then press the SET ...
-
Canon LV-5200 - page 35
35 VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has the picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the SCREEN Menu icon. Press the POINT DOWN button and move the red fram ...
-
Canon LV-5200 - page 36
36 SETTING Ceiling When this function is “ On, ” the picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounted projector. Rear When this function is “ On, ” the picture is left / right reversed. This function is used to project the image to a rear projection screen. Ceiling function ...
-
Canon LV-5200 - page 37
37 SETTING This function turns the Projection Lamp off when this projector detects a signal interruption and is not used for a certain period in order to reduce the power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.) The Power Management function operates to turn the Projection Lamp off when the input si ...
-
Canon LV-5200 - page 38
38 APPENDIX LAMP REPLA CEMENT LAMP REPLA CE When the life of the Projection Lamp of this projector draws to an end, the LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the Projection Lamp with a new one promptly. Follow these steps to replace the lamp assembly. LAMP ASSEMBLY HANDLE LAMP COVER ORDER REPLA CEMENT LAMP T ...
-
Canon LV-5200 - page 39
39 APPENDIX LAMP REPLA CE COUNTER Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting. NOTE : Do not reset the Lamp Replace Counter until after the Projection Lamp is replaced. Turn the projector on, press the MENU button and the ON- SCREEN ...
-
Canon LV-5200 - page 40
40 APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION The Remote Control Unit is not only able to operate this projector but also usable as a wireless mouse for most Personal Computers. The POINT buttons and two CLICK buttons are used for wireless mouse operation. This Wireless Mouse function is available only when PC mouse pointer is displayed on a ...
-
Canon LV-5200 - page 41
41 APPENDIX CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. When the projector is not in use, attach the Lens Cover. 1 3 Lightly wipe a cleaning cloth over the Projection Lens. 2 ...
-
Canon LV-5200 - page 42
42 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check the following: ● Make sure you have connected the projector to peripheral equipment as described properly in the section “ CONNECTING THE PROJECTOR ” on pages 11 ~ 13. ● Verify that all computer, video and power cord are properly connected and t ...
-
Canon LV-5200 - page 43
43 This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. If the problem still pers ...
-
Canon LV-5200 - page 44
44 INDICA T ORS AND PROJECT OR CONDITION Check the Indicators for the projector condition. • • • on • • • dim • • • off • • • flashing ✽ When the life of the Projection Lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the Projection Lamp with a new one promptly. Res ...
-
Canon LV-5200 - page 45
45 APPENDIX TECHNICAL SPECIFICA TIONS ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels. 0.8 ” TFT Active Matrix typ ...
-
Canon LV-5200 - page 46
46 APPENDIX CONFIGURA TIONS OF TERMINALS RGB INPUT 1 / OUT TERMINAL (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz. sync. Ground (Vert.sync.) DDC Data Sense 0 Vert. sync. DDC Clock 9 13 10 12 11 ...
-
Canon LV-5200 - page 47
47 APPENDIX Terminal : Mini DIN 8-PIN 1 2 3 4 5 8 7 6 Pin Configuration CONTROL PORT CONNECTOR ----- CLK DATA GND ----- ----- GND ----- R X D ----- ----- GND RTS / CTS T X D GND GND ----- ADB ----- GND ----- ----- ----- GND PS/2 Serial ADB 1 2 3 4 5 6 7 8 Vcc - Data + Data Ground 1 2 3 4 USB CONNECTOR (Series B) Pin Configuration 2 34 1 OPTIONAL P ...
-
Canon LV-5200 - page 48
1AA6P1P3787-- (MB3P) ©CANON INC . 2003 YT1-1339-000 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, J apan CANON U .S.A., INC. One Canon Plaza, Lake Success , NY 11042, U .S.A. CANON CANAD A, INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada CANON LA TIN AMERICA, INC. 703 W aterford W ay Suite 400 Miami, Florida 33126 U .S.A ...
Hai una domanda su Canon LV-5200?
Utilizza il modulo sottostante
Se non hai risolto il problema con Canon LV-5200 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Canon LV-5200 è probabile che voglia condividere il modo di risolverlo.