Manuale per l’uso Makita 601DST

15 pagine 0.74 mb
Scarica

Vai alla pagina of 15

Summary
  • Makita 601DST - page 1

    Battery-Powered Driver Drill Steel / Wood 10 mm (318") Equipped with Electric Brake 10 mm (3/8") MODEL 601D 10 mm (3/8") MODEL 6OlDST With Battery & Charger Wood screw (RPM) (L x W x H) weight 0.7 kg (311 6" x 3/4"1 - 750 (7-13116" x 1-13/16" x 6-5/32") (1.5 lbs) 4.5 mm x 20 mm 198 mm x 46 mm x 156 mm INS ...

  • Makita 601DST - page 2

    IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 2 KEEP WORK AREA CLEAN. Cluttered areas and benches invite in ...

  • Makita 601DST - page 3

    14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don’t carry tool with finger on switch. Be sure switch is OFF when plugging in. 16. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords i ...

  • Makita 601DST - page 4

    IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY & CHARGER Length of Cord (Feet) 25 AWG Size of Cord 18 I. SAVE THESE INSTRUCTIONS - This manual 50 100 150 18 18 16 9. Do not operate charger with damaged cord or plug - replace them im- mediately. IO. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; ...

  • Makita 601DST - page 5

    ADDITIONAL SAFETY RULES FOR BATTERY 1. Always charge the Makita battery 122 immediately after purchase. 2. Always recharge the Makita battery 122 after use. 3. Be sure to charge the Makita battery 122 for approx. one week every six months, when not using it for long periods. If left uncharged, it may become unchargeable. 4. Use only the Makita char ...

  • Makita 601DST - page 6

    ADDITIONAL SAFETY RULES FOR CHARGER 1. The Makita charger Model DC122 is specifically designed to charge only the Makita battery 121 or 122. Do not attempt to charge any other battery with this charger. 2. Handle the charger carefully. Do not drop or strike it. 3. Never carry the charger by cord or yank it to disconnect from receptacle. 4. Keep cor ...

  • Makita 601DST - page 7

    ADDITIONAL SAFETY RULES FOR TOOL 1. This tool is specifically designed to drill in woods/metals or to drive wood 2. Always be sure you have a firm footing. 3. Always secure small workpieces in a vise or similar hold-down device. 4. Hold the tool firmly. 5. Keep hands away from rotating parts. 6. When drilling into walls, floors or wherever "li ...

  • Makita 601DST - page 8

    Charging Connect the battery to the charger using the adaptor cord. Then plug the charger into the power source. The charging light will illuminate and charging will begin. When the charg- ing light goes out at a certain time, the charging is complete. Unplug the charger. (Note: Refer to the table below for the charging time.) DC122 DC121 122 3 A ...

  • Makita 601DST - page 9

    Installing or removing the drill bit CAUTION : Always be sure that the tool is switched off and the batterv is disconnected from the tool before installing or removing the bit. To install the bit, place it in the chuck as far as it will go. Tighten the chuck by hand. Place the chuck key in each of the three holes and tighten clockwise. Be sure to t ...

  • Makita 601DST - page 10

    Connecting the battery to the tool Connect the battery to the tool using the adaptor cord. To prevent the adaptor cord from being accidentally disconnected, hook the cord to the strain relief hook on the battery. Carrying the battery Hook the battery to your waist belt. If the adaptor cord is too long for your work, use the band provided to hold it ...

  • Makita 601DST - page 11

    Screwdriving operation Place the point of the driver bit in the screw head and apply pressure to the tool. Start the tool slowly and then increase the speed gradually. Release the switch trigger just as the screw bottoms out. The electric brake will then stop the tool immediately, preventing the screw and/or bit from being damaged. When driving woo ...

  • Makita 601DST - page 12

    MAINTENANCE CAUTION: Always be sure that the tool is switched off and the battery is disconnected from the tool before attempting to perform inspection or maintenance. Storage Do not clean the tool, charger and/or battery with benzine, thinner or cleaning chemi- 0 Do not store the tool, charger and/or battery in locations where the temperature may ...

  • Makita 601DST - page 13

    Dec -19-’94 US 10 mm (3/8”) Model 601D BATTERY-POWERED DRIVER DRILL Note: The switch and other part configurations may differ from country to country. 13 ...

  • Makita 601DST - page 14

    1 1 Name Plate 10 2 5 Tapping Screw 4x20 11 12 3 1 Housing Set IWith Item 181 14 5 1 Lever 15 6 1 Trigger 7 1 Inlet 16 8 1 Motor I0.C. 12 V 1 11 9 1 Plane Bsarlng 5 18 4 1 Switch 13 14 1 Gear Complete 1 Drill Chuck S10 1 Plane Besrlng 4 1 Gear COmplete 1 1-46 1 Plane Beering 4 1 Holder 1 1 Makita Label 1 Tapping Screw BT 3x 10 Housing Set IWith Ite ...

  • Makita 601DST - page 15

    Recycling the battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 1) Remove belt from the battery 2) Ship or take battery to your nearest Makita Factory Service Center or Distributor that sells Makita lead batteries. (Call your nearest Makita Service Center or ...

Fabbricante Makita Categoria Cordless Drill

I documenti che otteniamo dal fabbricante del dispositivoMakita 601DST possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Makita
- manuali per l’uso 601DST
- schede prodotto Makita
- opuscoli
- o etichette energetiche Makita 601DST
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Makita 601DST.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Makita 601DST, manuali di manutenzione, brevi manuali o manuali utente Makita 601DST. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Makita 601DST.

Manuali per l’uso simili

Manuale completo del dispositivo Makita 601DST, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Makita 601DST dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Makita 601DST.

Il manuale per l’uso completo Makita, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Makita 601DST - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Makita 601DST, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Makita 601DST che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Makita 601DST - che ci dovrebbe aiutare nei primi passi durante l'uso Makita 601DST
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Makita 601DST
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Makita 601DST in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Makita 601DST?

Utilizza il modulo sottostante

Se non hai risolto il problema con Makita 601DST con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Makita 601DST è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)